VALUE rb_IupTabsv(int argc,VALUE *argv,VALUE self)
{
extern VALUE rb_cIupTabs;
Ihandle* v;
Ihandle* params[100];
int i;
VALUE node;
VALUE v_params,v_hash;
rb_scan_args(argc,argv,"11",&v_params,&v_hash);
for(i=0;i<RARRAY_LEN(v_params) && i<100;i++) {
node = RARRAY_PTR(v_params)[i];
if(node==Qnil)
params[i] = NULL;
else
params[i] = (Ihandle*)NUM2ULONG(rb_iv_get(node,"@ihandle"));
}
params[i] = NULL;
IupControlsOpen();
v = IupTabsv(params);
if(TYPE(v_hash)==T_HASH)
rb_set_attribute(v,v_hash);
if(v)
return rb_funcall(rb_cIupTabs,rb_intern("new"),1,ULONG2NUM((unsigned long)v));
return Qnil;
}
static int Tabsv(lua_State *L)
{
Ihandle **hlist = iuplua_checkihandle_array(L, 1);
Ihandle *h = IupTabsv(hlist);
iuplua_plugstate(L, h);
iuplua_pushihandle_raw(L, h);
free(hlist);
return 1;
}
/*
main
*/
int main(int argc, char **argv)
{
Ihandle *vboxr[MAXPLOT+1]; /* tabs containing the plots */
Ihandle *dlg, *vboxl, *hbox, *lbl1, *lbl2, *lbl3, *bt1,
*boxinfo, *boxdial1, *boxdial2, *f1, *f2;
int ii;
IupOpen(&argc, &argv); // init IUP
IupControlsOpen(); // init the addicional controls library (we use IupTabs)
IupPPlotOpen(); // init IupPPlot library
// cdInitGdiPlus();
// create plots
for (ii=0; ii<MAXPLOT; ii++)
plot[ii] = IupPPlot();
// left panel: plot control
// Y zooming
dial1 = IupDial("VERTICAL");
lbl1 = IupLabel("+");
lbl2 = IupLabel("-");
boxinfo = IupVbox(lbl1, IupFill(), lbl2, NULL);
boxdial1 = IupHbox(boxinfo, dial1, NULL);
IupSetAttribute(boxdial1, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "SIZE", "20x52");
IupSetAttribute(boxinfo, "GAP", "2");
IupSetAttribute(boxinfo, "MARGIN", "4");
IupSetAttribute(boxinfo, "EXPAND", "YES");
IupSetAttribute(lbl1, "EXPAND", "NO");
IupSetAttribute(lbl2, "EXPAND", "NO");
IupSetAttribute(dial1, "ACTIVE", "NO");
IupSetAttribute(dial1, "SIZE", "20x52");
IupSetCallback(dial1, "BUTTON_PRESS_CB", (Icallback)dial1_btndown_cb);
IupSetCallback(dial1, "MOUSEMOVE_CB", (Icallback)dial1_btnup_cb);
IupSetCallback(dial1, "BUTTON_RELEASE_CB", (Icallback)dial1_btnup_cb);
tgg1 = IupToggle("Y Autoscale", NULL);
IupSetCallback(tgg1, "ACTION", (Icallback)tgg1_cb);
IupSetAttribute(tgg1, "VALUE", "ON");
f1 = IupFrame( IupVbox(boxdial1, tgg1, NULL) );
IupSetAttribute(f1, "TITLE", "Y Zoom");
// X zooming
dial2 = IupDial("HORIZONTAL");
lbl1 = IupLabel("-");
lbl2 = IupLabel("+");
boxinfo = IupHbox(lbl1, IupFill(), lbl2, NULL);
boxdial2 = IupVbox(dial2, boxinfo, NULL);
IupSetAttribute(boxdial2, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "SIZE", "64x16");
IupSetAttribute(boxinfo, "GAP", "2");
IupSetAttribute(boxinfo, "MARGIN", "4");
IupSetAttribute(boxinfo, "EXPAND", "HORIZONTAL");
IupSetAttribute(lbl1, "EXPAND", "NO");
IupSetAttribute(lbl2, "EXPAND", "NO");
IupSetAttribute(dial2, "ACTIVE", "NO");
IupSetAttribute(dial2, "SIZE", "64x16");
IupSetCallback(dial2, "BUTTON_PRESS_CB", (Icallback)dial2_btndown_cb);
IupSetCallback(dial2, "MOUSEMOVE_CB", (Icallback)dial2_btnup_cb);
IupSetCallback(dial2, "BUTTON_RELEASE_CB", (Icallback)dial2_btnup_cb);
tgg2 = IupToggle("X Autoscale", NULL);
IupSetCallback(tgg2, "ACTION", (Icallback)tgg2_cb);
f2 = IupFrame( IupVbox(boxdial2, tgg2, NULL) );
IupSetAttribute(f2, "TITLE", "X Zoom");
lbl1 = IupLabel("");
IupSetAttribute(lbl1, "SEPARATOR", "HORIZONTAL");
tgg3 = IupToggle("Vertical Grid", NULL);
IupSetCallback(tgg3, "ACTION", (Icallback)tgg3_cb);
tgg4 = IupToggle("Horizontal Grid", NULL);
IupSetCallback(tgg4, "ACTION", (Icallback)tgg4_cb);
lbl2 = IupLabel("");
IupSetAttribute(lbl2, "SEPARATOR", "HORIZONTAL");
tgg5 = IupToggle("Legend", NULL);
IupSetCallback(tgg5, "ACTION", (Icallback)tgg5_cb);
lbl3 = IupLabel("");
IupSetAttribute(lbl3, "SEPARATOR", "HORIZONTAL");
bt1 = IupButton("Export PDF", NULL);
IupSetCallback(bt1, "ACTION", (Icallback)bt1_cb);
vboxl = IupVbox(f1, f2, lbl1, tgg3, tgg4, lbl2, tgg5, lbl3, bt1, NULL);
IupSetAttribute(vboxl, "GAP", "4");
IupSetAttribute(vboxl, "EXPAND", "NO");
// right panel: tabs with plots
for (ii=0; ii<MAXPLOT; ii++) {
vboxr[ii] = IupVbox(plot[ii], NULL); // each plot a tab
IupSetfAttribute(vboxr[ii], "TABTITLE", "Plot %d", ii); // name each tab
}
vboxr[MAXPLOT] = NULL; // mark end of vector
tabs = IupTabsv(vboxr); // create tabs
IupSetCallback(tabs, "TABCHANGE_CB", (Icallback)tabs_tabchange_cb);
// dialog
hbox = IupHbox(vboxl, tabs, NULL);
IupSetAttribute(hbox, "MARGIN", "4x4");
IupSetAttribute(hbox, "GAP", "10");
dlg = IupDialog(hbox);
IupSetAttributes(dlg, "SIZE=500x240" );
IupSetAttribute(dlg, "TITLE", "IupPPlot Example");
InitPlots(); // It must be able to be done independent of dialog Mapping
tabs_tabchange_cb(tabs, vboxr[0]);
IupShowXY(dlg, IUP_CENTER, IUP_CENTER);
IupSetAttribute(dlg, "SIZE", NULL);
IupMainLoop();
IupClose();
return EXIT_SUCCESS;
}
void MglPlotTest(void)
{
static Ihandle *dlg = NULL;
if (!dlg)
{
Ihandle *vboxr[MAXPLOT+1]; /* tabs containing the plots */
Ihandle *vboxl, *hbox, *lbl1, *lbl2, *lbl3, *bt1,
*boxinfo, *boxdial1, *boxdial2, *f1, *f2;
int ii;
IupControlsOpen();
IupMglPlotOpen(); /* init IupMGLPlot library */
IupSetGlobal("MGLFONTS", "../etc/mglfonts");
/* create plots */
for (ii=0; ii<MAXPLOT; ii++)
{
plot[ii] = IupMglPlot();
IupSetAttribute(plot[ii], "OPENGL", "Yes");
}
/* left panel: plot control
Y zooming */
dial1 = IupDial("VERTICAL");
lbl1 = IupLabel("+");
lbl2 = IupLabel("-");
boxinfo = IupVbox(lbl1, IupFill(), lbl2, NULL);
boxdial1 = IupHbox(boxinfo, dial1, NULL);
IupSetAttribute(boxdial1, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "SIZE", "20x52");
IupSetAttribute(boxinfo, "GAP", "2");
IupSetAttribute(boxinfo, "MARGIN", "4");
IupSetAttribute(boxinfo, "EXPAND", "YES");
IupSetAttribute(lbl1, "EXPAND", "NO");
IupSetAttribute(lbl2, "EXPAND", "NO");
IupSetAttribute(dial1, "ACTIVE", "NO");
IupSetAttribute(dial1, "SIZE", "20x52");
IupSetCallback(dial1, "BUTTON_PRESS_CB", (Icallback)dial1_btndown_cb);
IupSetCallback(dial1, "MOUSEMOVE_CB", (Icallback)dial1_btnup_cb);
IupSetCallback(dial1, "BUTTON_RELEASE_CB", (Icallback)dial1_btnup_cb);
tgg1 = IupToggle("Y Autoscale", NULL);
IupSetCallback(tgg1, "ACTION", (Icallback)tgg1_cb);
IupSetAttribute(tgg1, "VALUE", "ON");
f1 = IupFrame( IupVbox(boxdial1, tgg1, NULL) );
IupSetAttribute(f1, "TITLE", "Y Zoom");
/* X zooming */
dial2 = IupDial("HORIZONTAL");
lbl1 = IupLabel("-");
lbl2 = IupLabel("+");
boxinfo = IupHbox(lbl1, IupFill(), lbl2, NULL);
boxdial2 = IupVbox(dial2, boxinfo, NULL);
IupSetAttribute(boxdial2, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "ALIGNMENT", "ACENTER");
IupSetAttribute(boxinfo, "SIZE", "64x16");
IupSetAttribute(boxinfo, "GAP", "2");
IupSetAttribute(boxinfo, "MARGIN", "4");
IupSetAttribute(boxinfo, "EXPAND", "HORIZONTAL");
IupSetAttribute(lbl1, "EXPAND", "NO");
IupSetAttribute(lbl2, "EXPAND", "NO");
IupSetAttribute(dial2, "ACTIVE", "NO");
IupSetAttribute(dial2, "SIZE", "64x16");
IupSetCallback(dial2, "BUTTON_PRESS_CB", (Icallback)dial2_btndown_cb);
IupSetCallback(dial2, "MOUSEMOVE_CB", (Icallback)dial2_btnup_cb);
IupSetCallback(dial2, "BUTTON_RELEASE_CB", (Icallback)dial2_btnup_cb);
tgg2 = IupToggle("X Autoscale", NULL);
IupSetCallback(tgg2, "ACTION", (Icallback)tgg2_cb);
f2 = IupFrame( IupVbox(boxdial2, tgg2, NULL) );
IupSetAttribute(f2, "TITLE", "X Zoom");
lbl1 = IupLabel("");
IupSetAttribute(lbl1, "SEPARATOR", "HORIZONTAL");
tgg3 = IupToggle("Vertical Grid", NULL);
IupSetCallback(tgg3, "ACTION", (Icallback)tgg3_cb);
tgg4 = IupToggle("Horizontal Grid", NULL);
IupSetCallback(tgg4, "ACTION", (Icallback)tgg4_cb);
tgg6 = IupToggle("Box", NULL);
IupSetCallback(tgg6, "ACTION", (Icallback)tgg6_cb);
lbl2 = IupLabel("");
IupSetAttribute(lbl2, "SEPARATOR", "HORIZONTAL");
tgg5 = IupToggle("Legend", NULL);
IupSetCallback(tgg5, "ACTION", (Icallback)tgg5_cb);
lbl3 = IupLabel("");
IupSetAttribute(lbl3, "SEPARATOR", "HORIZONTAL");
bt1 = IupButton("Export", NULL);
IupSetCallback(bt1, "ACTION", (Icallback)bt1_cb);
vboxl = IupVbox(f1, f2, lbl1, tgg3, tgg4, tgg6, lbl2, tgg5, lbl3, bt1, NULL);
IupSetAttribute(vboxl, "GAP", "4");
IupSetAttribute(vboxl, "EXPAND", "NO");
/* right panel: tabs with plots */
for (ii=0; ii<MAXPLOT; ii++) {
vboxr[ii] = IupVbox(plot[ii], NULL); /* each plot a tab */
IupSetfAttribute(vboxr[ii], "TABTITLE", "Plot %d", ii); /* name each tab */
IupSetHandle(IupGetAttribute(vboxr[ii], "TABTITLE"), vboxr[ii]);
}
vboxr[MAXPLOT] = NULL; /* mark end of vector */
tabs = IupTabsv(vboxr);
IupSetCallback(tabs, "TABCHANGE_CB", (Icallback)tabs_tabchange_cb);
hbox = IupHbox(vboxl, tabs, NULL);
IupSetAttribute(hbox, "MARGIN", "4x4");
IupSetAttribute(hbox, "GAP", "10");
dlg = IupDialog(hbox);
IupSetAttribute(dlg, "TITLE", "IupMglPlot Example");
InitPlots(); /* It must be able to be done independent of dlg Mapping */
tabs_tabchange_cb(tabs, vboxr[0]);
}
IupSetAttribute(dlg, "SIZE", "300x");
IupShowXY(dlg, IUP_CENTER, IUP_CENTER);
IupSetAttribute(dlg, "SIZE", NULL);
}
