void If_PrintOilPressure(uint16_t pressure)
{
uint16_t color;
uint8_t a, b;
a = 3;
b = 1;
if (pressure < GREEN_THRESHOLD)
color = Yellow;
if ((pressure >= GREEN_THRESHOLD) && (pressure < RED_THRESHOLD))
color = Green;
if (pressure >= RED_THRESHOLD)
color = Red;
LCD_setColor(color);
LCD_Rectangle(5 + a * 80, 5 + b * 80, 75 + a * 80, 29 + b * 80);
LCD_Rectangle(5 + a * 80, 30 + b * 80, 14 + a * 80, 45 + b * 80);
LCD_Rectangle(63 + a * 80, 30 + b * 80, 75 + a * 80, 45 + b * 80);
LCD_Rectangle(5 + a * 80, 46 + b * 80, 29 + a * 80, 61 + b * 80);
LCD_Rectangle(46 + a * 80, 46 + b * 80, 75 + a * 80, 61 + b * 80);
LCD_Rectangle(5 + a * 80, 62 + b * 80, 75 + a * 80, 75 + b * 80);
LCD_setColor(0x0000);
LCD_setBackColor(color);
DBG_PrintDEC_XXXgrad(pressure / 10, a * 80 + 15, b * 80 + 30);
LCD_printXY("p", a * 80 + 30, b * 80 + 46);
}
void If_PrintCylCell(uint8_t N, uint16_t temp)
{
uint16_t color;
uint8_t a, b;
if (N > 8)
return;
a = N % 3;
b = N / 3;
if (temp < GREEN_THRESHOLD)
color = Yellow;
if ((temp >= GREEN_THRESHOLD) && (temp < RED_THRESHOLD))
color = Green;
if (temp >= RED_THRESHOLD)
color = Red;
LCD_setColor(color);
LCD_Rectangle(5 + a * 80, 5 + b * 80, 75 + a * 80, 29 + b * 80);
LCD_Rectangle(5 + a * 80, 46 + b * 80, 75 + a * 80, 75 + b * 80);
LCD_Rectangle(5 + a * 80, 30 + b * 80, 14 + a * 80, 45 + b * 80);
LCD_Rectangle(63 + a * 80, 30 + b * 80, 75 + a * 80, 45 + b * 80);
LCD_setColor(0x0000);
LCD_setBackColor(color);
DBG_PrintDEC_XXXgrad(temp / 10, a * 80 + 15, b * 80 + 30);
}
void If_PrintOilTemp(uint16_t temp)
{
uint16_t color;
uint8_t a, b;
a = 3;
b = 0;
if (temp < GREEN_THRESHOLD)
color = Yellow;
if ((temp >= GREEN_THRESHOLD) && (temp < RED_THRESHOLD))
color = Green;
if (temp >= RED_THRESHOLD)
color = Red;
LCD_setColor(color);
LCD_Rectangle(5 + a * 80, 5 + b * 80, 75 + a * 80, 29 + b * 80);
LCD_Rectangle(5 + a * 80, 30 + b * 80, 14 + a * 80, 45 + b * 80);
LCD_Rectangle(63 + a * 80, 30 + b * 80, 75 + a * 80, 45 + b * 80);
LCD_Rectangle(5 + a * 80, 46 + b * 80, 29 + a * 80, 61 + b * 80);
LCD_Rectangle(46 + a * 80, 46 + b * 80, 75 + a * 80, 61 + b * 80);
LCD_Rectangle(5 + a * 80, 62 + b * 80, 75 + a * 80, 75 + b * 80);
LCD_setColor(0x0000);
LCD_setBackColor(color);
DBG_PrintDEC_XXXgrad(temp / 10, a * 80 + 15, b * 80 + 30);
LCD_printXY("t", a * 80 + 30, b * 80 + 46);
}
void If_PrintMetal(uint16_t met)
{
uint16_t color;
uint8_t a, b;
a = 3;
b = 2;
if (met)
color = Red;
else
color = Green;
LCD_setColor(color);
LCD_Rectangle(5 + a * 80, 5 + b * 80, 75 + a * 80, 45 + b * 80);
LCD_Rectangle(5 + a * 80, 46 + b * 80, 29 + a * 80, 61 + b * 80);
LCD_Rectangle(46 + a * 80, 46 + b * 80, 75 + a * 80, 61 + b * 80);
LCD_Rectangle(5 + a * 80, 62 + b * 80, 75 + a * 80, 75 + b * 80);
LCD_setColor(0x0000);
LCD_setBackColor(color);
LCD_printXY("m", a * 80 + 30, b * 80 + 46);
}
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_FSMC_Init();
MX_SPI1_Init();
MX_USART1_UART_Init();
/* USER CODE BEGIN 2 */
LCD_Init(LCD_ORIENTATION_PORTRAIT);
LCD_setFont(SmallFont);
LCD_setBackColor(VGA_BLACK);
LCD_fillScr(VGA_BLACK);
TSC2046_Init();
TSC2046_Calibration();
LCD_fillScr(VGA_BLACK);
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
char buf[100];
int16_t xpos, ypos;
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
LCD_setColor(VGA_BLUE);
LCD_drawRect(0, 0, 10, 10);
while(!Is_Touhcing());
while (Is_Touhcing())
{
// read
xpos = TSC2046_Get_Position_X();
ypos = TSC2046_Get_Position_Y();
// clear
if (xpos > LCD_WIDTH - 20 && ypos > LCD_HEIGHT - 20)
{
LCD_fillScr(VGA_BLACK);
}
// print
sprintf(buf, "(x,y)=(%04d, %04d)", xpos, ypos);
LCD_setColor(VGA_RED);
LCD_setBackColor(VGA_BLACK);
LCD_print(buf, 20, 300, 0);
// draw pen
LCD_setColor(rand() | 0b0111101111101111);
LCD_fillCircle(xpos, ypos, 3);
// clear button
LCD_setColor(VGA_WHITE);
LCD_fillRect(LCD_WIDTH - 20, LCD_HEIGHT - 20, LCD_WIDTH - 1, LCD_HEIGHT - 1);
// pen indicator
LCD_setColor(VGA_GREEN);
LCD_drawRect(0, 0, 10, 10);
}
}
/* USER CODE END 3 */
}