/**@brief Timer callback used for periodic changing of LED state.
*/
static void iot_timer_client_one_callback(iot_timer_time_in_ms_t elapsed_time)
{
UNUSED_PARAMETER(elapsed_time);
LEDS_INVERT(DISPLAY_LED_0);
printf("---- %4d ms\r\n", IOT_TIMER_CLIENT_ONE_CB_INTERVAL);
}
/**@brief Configure leds to indicate required state.
* @param[in] indicate State to be indicated.
*/
static uint32_t bsp_led_indication(bsp_indication_t indicate)
{
uint32_t err_code = NRF_SUCCESS;
uint32_t next_delay = 0;
switch (indicate)
{
case BSP_INDICATE_IDLE:
LEDS_OFF(LEDS_MASK & ~m_alert_mask);
m_stable_state = indicate;
break;
case BSP_INDICATE_SCANNING:
case BSP_INDICATE_ADVERTISING:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK & ~m_alert_mask);
// in advertising blink LED_0
if (LED_IS_ON(BSP_LED_0_MASK))
{
LEDS_OFF(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING ? ADVERTISING_LED_OFF_INTERVAL :
ADVERTISING_SLOW_LED_OFF_INTERVAL;
}
else
{
LEDS_ON(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING ? ADVERTISING_LED_ON_INTERVAL :
ADVERTISING_SLOW_LED_ON_INTERVAL;
}
m_stable_state = indicate;
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(next_delay), NULL);
break;
case BSP_INDICATE_ADVERTISING_WHITELIST:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK & ~m_alert_mask);
// in advertising quickly blink LED_0
if (LED_IS_ON(BSP_LED_0_MASK))
{
LEDS_OFF(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING_WHITELIST ?
ADVERTISING_WHITELIST_LED_OFF_INTERVAL :
ADVERTISING_SLOW_LED_OFF_INTERVAL;
}
else
{
LEDS_ON(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING_WHITELIST ?
ADVERTISING_WHITELIST_LED_ON_INTERVAL :
ADVERTISING_SLOW_LED_ON_INTERVAL;
}
m_stable_state = indicate;
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(next_delay), NULL);
break;
case BSP_INDICATE_ADVERTISING_SLOW:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK & ~m_alert_mask);
// in advertising slowly blink LED_0
if (LED_IS_ON(BSP_LED_0_MASK))
{
LEDS_OFF(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING_SLOW ? ADVERTISING_SLOW_LED_OFF_INTERVAL :
ADVERTISING_SLOW_LED_OFF_INTERVAL;
}
else
{
LEDS_ON(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING_SLOW ? ADVERTISING_SLOW_LED_ON_INTERVAL :
ADVERTISING_SLOW_LED_ON_INTERVAL;
}
m_stable_state = indicate;
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(next_delay), NULL);
break;
case BSP_INDICATE_ADVERTISING_DIRECTED:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK & ~m_alert_mask);
// in advertising very quickly blink LED_0
if (LED_IS_ON(BSP_LED_0_MASK))
{
LEDS_OFF(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING_DIRECTED ?
ADVERTISING_DIRECTED_LED_OFF_INTERVAL :
ADVERTISING_SLOW_LED_OFF_INTERVAL;
}
else
{
LEDS_ON(BSP_LED_0_MASK);
next_delay = indicate ==
BSP_INDICATE_ADVERTISING_DIRECTED ?
ADVERTISING_DIRECTED_LED_ON_INTERVAL :
ADVERTISING_SLOW_LED_ON_INTERVAL;
}
m_stable_state = indicate;
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(next_delay), NULL);
break;
case BSP_INDICATE_BONDING:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK & ~m_alert_mask);
// in bonding fast blink LED_0
if (LED_IS_ON(BSP_LED_0_MASK))
{
LEDS_OFF(BSP_LED_0_MASK);
}
else
{
LEDS_ON(BSP_LED_0_MASK);
}
m_stable_state = indicate;
err_code =
app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(BONDING_INTERVAL), NULL);
break;
case BSP_INDICATE_CONNECTED:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK & ~m_alert_mask);
LEDS_ON(BSP_LED_0_MASK);
m_stable_state = indicate;
break;
case BSP_INDICATE_SENT_OK:
// when sending shortly invert LED_1
LEDS_INVERT(BSP_LED_1_MASK);
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(SENT_OK_INTERVAL), NULL);
break;
case BSP_INDICATE_SEND_ERROR:
// on receving error invert LED_1 for long time
LEDS_INVERT(BSP_LED_1_MASK);
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(SEND_ERROR_INTERVAL), NULL);
break;
case BSP_INDICATE_RCV_OK:
// when receving shortly invert LED_1
LEDS_INVERT(BSP_LED_1_MASK);
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(RCV_OK_INTERVAL), NULL);
break;
case BSP_INDICATE_RCV_ERROR:
// on receving error invert LED_1 for long time
LEDS_INVERT(BSP_LED_1_MASK);
err_code = app_timer_start(m_leds_timer_id, BSP_MS_TO_TICK(RCV_ERROR_INTERVAL), NULL);
break;
case BSP_INDICATE_FATAL_ERROR:
// on fatal error turn on all leds
LEDS_ON(LEDS_MASK);
m_stable_state = indicate;
break;
case BSP_INDICATE_ALERT_0:
case BSP_INDICATE_ALERT_1:
case BSP_INDICATE_ALERT_2:
case BSP_INDICATE_ALERT_3:
case BSP_INDICATE_ALERT_OFF:
err_code = app_timer_stop(m_alert_timer_id);
next_delay = (uint32_t)BSP_INDICATE_ALERT_OFF - (uint32_t)indicate;
// a little trick to find out that if it did not fall through ALERT_OFF
if (next_delay && (err_code == NRF_SUCCESS))
{
m_alert_mask = ALERT_LED_MASK;
if (next_delay > 1)
{
err_code = app_timer_start(m_alert_timer_id, BSP_MS_TO_TICK(
(next_delay * ALERT_INTERVAL)), NULL);
}
LEDS_ON(m_alert_mask);
}
else
{
LEDS_OFF(m_alert_mask);
m_alert_mask = 0;
}
break;
case BSP_INDICATE_USER_STATE_OFF:
LEDS_OFF(LEDS_MASK);
m_stable_state = indicate;
break;
case BSP_INDICATE_USER_STATE_0:
LEDS_OFF(LEDS_MASK & ~BSP_LED_0_MASK);
LEDS_ON(BSP_LED_0_MASK);
m_stable_state = indicate;
break;
case BSP_INDICATE_USER_STATE_1:
LEDS_OFF(LEDS_MASK & ~BSP_LED_1_MASK);
LEDS_ON(BSP_LED_1_MASK);
m_stable_state = indicate;
break;
case BSP_INDICATE_USER_STATE_2:
LEDS_OFF(LEDS_MASK & ~(BSP_LED_0_MASK | BSP_LED_1_MASK));
LEDS_ON(BSP_LED_0_MASK | BSP_LED_1_MASK);
m_stable_state = indicate;
break;
case BSP_INDICATE_USER_STATE_3:
case BSP_INDICATE_USER_STATE_ON:
LEDS_ON(LEDS_MASK);
m_stable_state = indicate;
break;
default:
break;
}
return err_code;
}
/**@brief Handle events from alert timer.
*
* @param[in] p_context parameter registered in timer start function.
*/
static void alert_timer_handler(void * p_context)
{
UNUSED_PARAMETER(p_context);
LEDS_INVERT(ALERT_LED_MASK);
}
/**@brief Timer callback used for controlling board LEDs to represent application state.
*
*/
static void blink_timeout_handler(iot_timer_time_in_ms_t wall_clock_value)
{
UNUSED_PARAMETER(wall_clock_value);
#ifdef COMMISSIONING_ENABLED
static bool id_mode_previously_enabled;
if (m_identity_mode_active == false)
{
#endif // COMMISSIONING_ENABLED
switch (m_display_state)
{
case LEDS_INACTIVE:
{
LEDS_OFF(ALL_APP_LED);
break;
}
case LEDS_CONNECTABLE_MODE:
{
LEDS_INVERT(LED_ONE);
LEDS_OFF((LED_TWO | LED_THREE | LED_FOUR));
break;
}
case LEDS_IPV6_IF_DOWN:
{
LEDS_INVERT(LED_TWO);
LEDS_OFF((LED_ONE | LED_THREE | LED_FOUR));
break;
}
case LEDS_IPV6_IF_UP:
{
LEDS_ON(LED_ONE);
LEDS_OFF((LED_TWO | LED_THREE | LED_FOUR));
break;
}
case LEDS_CONNECTED_TO_BROKER:
{
LEDS_ON(LED_TWO);
LEDS_OFF((LED_ONE | LED_THREE | LED_FOUR));
m_display_state = LEDS_PUBLISHING;
break;
}
case LEDS_PUBLISHING:
{
LEDS_OFF(LED_ONE);
LEDS_ON(LED_TWO);
break;
}
default:
{
break;
}
}
#ifdef COMMISSIONING_ENABLED
}
#endif // COMMISSIONING_ENABLED
#ifdef COMMISSIONING_ENABLED
if ((id_mode_previously_enabled == false) && (m_identity_mode_active == true))
{
LEDS_OFF(LED_THREE | LED_FOUR);
}
if ((id_mode_previously_enabled == true) && (m_identity_mode_active == true))
{
LEDS_INVERT(LED_THREE | LED_FOUR);
}
if ((id_mode_previously_enabled == true) && (m_identity_mode_active == false))
{
LEDS_OFF(LED_THREE | LED_FOUR);
}
id_mode_previously_enabled = m_identity_mode_active;
#endif // COMMISSIONING_ENABLED
}
/**@brief Timer callback used for controlling board LEDs to represent application state.
*
*/
static void blink_timeout_handler(iot_timer_time_in_ms_t wall_clock_value)
{
UNUSED_PARAMETER(wall_clock_value);
#ifdef COMMISSIONING_ENABLED
static bool id_mode_previously_enabled;
if (m_identity_mode_active == false)
{
#endif // COMMISSIONING_ENABLED
switch (m_display_state)
{
case LEDS_INACTIVE:
{
LEDS_OFF((LED_ONE | LED_TWO));
LEDS_OFF((LED_THREE | LED_FOUR));
break;
}
case LEDS_CONNECTABLE_MODE:
{
LEDS_INVERT(LED_ONE);
LEDS_OFF(LED_TWO);
LEDS_OFF((LED_THREE | LED_FOUR));
break;
}
case LEDS_IPV6_IF_DOWN:
{
LEDS_ON(LED_ONE);
LEDS_INVERT(LED_TWO);
LEDS_OFF((LED_THREE | LED_FOUR));
break;
}
case LEDS_IPV6_IF_UP:
{
LEDS_OFF(LED_ONE);
LEDS_ON(LED_TWO);
// If m_blink_led_three is set, keep LED_THREE on for 1 period.
if LED_IS_ON(LED_THREE)
{
LEDS_OFF(LED_THREE);
}
else if (m_blink_led_three == true)
{
LEDS_ON(LED_THREE);
m_blink_led_three = false;
}
// If m_blink_led_four is set, keep LED_FOUR on for 1 period.
if LED_IS_ON(LED_FOUR)
{
LEDS_OFF(LED_FOUR);
}
else if (m_blink_led_four == true)
{
LEDS_ON(LED_FOUR);
m_blink_led_four = false;
}
break;
}
default:
{
break;
}
}
static void handle_led_request(uint32_t led_mask, coap_message_t * p_request, coap_resource_t * p_resource)
{
coap_message_conf_t response_config;
memset (&response_config, 0, sizeof(coap_message_conf_t));
if (p_request->header.type == COAP_TYPE_NON)
{
response_config.type = COAP_TYPE_NON;
}
else if (p_request->header.type == COAP_TYPE_CON)
{
response_config.type = COAP_TYPE_ACK;
}
// PIGGY BACKED RESPONSE
response_config.code = COAP_CODE_405_METHOD_NOT_ALLOWED;
// Copy message ID.
response_config.id = p_request->header.id;
// Copy token.
memcpy(&response_config.token[0], &p_request->token[0], p_request->header.token_len);
// Copy token length.
response_config.token_len = p_request->header.token_len;
coap_message_t * p_response;
uint32_t err_code = coap_message_new(&p_response, &response_config);
APP_ERROR_CHECK(err_code);
err_code = coap_message_remote_addr_set(p_response, &p_request->remote);
APP_ERROR_CHECK(err_code);
// Handle request.
switch (p_request->header.code)
{
case COAP_CODE_GET:
{
p_response->header.code = COAP_CODE_205_CONTENT;
// Select the first common content-type between the resource and the CoAP client.
coap_content_type_t ct_to_use;
err_code = coap_message_ct_match_select(&ct_to_use, p_request, p_resource);
if (err_code != NRF_SUCCESS)
{
// None of the accept content formats are supported in this resource endpoint.
p_response->header.code = COAP_CODE_415_UNSUPPORTED_CONTENT_FORMAT;
p_response->header.type = COAP_TYPE_RST;
}
else
{
// Set response payload to actual LED state.
char * response_str;
led_value_get(led_mask, ct_to_use, &response_str);
err_code = coap_message_payload_set(p_response, response_str, strlen(response_str));
APP_ERROR_CHECK(err_code);
}
break;
}
case COAP_CODE_PUT:
{
p_response->header.code = COAP_CODE_204_CHANGED;
// Change LED state according to request.
switch (p_request->p_payload[0])
{
case COMMAND_ON:
{
LEDS_ON(led_mask);
break;
}
case COMMAND_OFF:
{
LEDS_OFF(led_mask);
break;
}
case COMMAND_TOGGLE:
{
LEDS_INVERT(led_mask);
break;
}
default:
{
p_response->header.code = COAP_CODE_400_BAD_REQUEST;
break;
}
}
break;
}
default:
{
p_response->header.code = COAP_CODE_405_METHOD_NOT_ALLOWED;
break;
}
}
uint32_t msg_handle;
err_code = coap_message_send(&msg_handle, p_response);
APP_ERROR_CHECK(err_code);
err_code = coap_message_delete(p_response);
APP_ERROR_CHECK(err_code);
}
void toggle_led(int i) {
if (i < LEDS_NUMBER) {
LEDS_INVERT(1 << leds_list[i]);
}
}
/** @brief Function for main application entry.
*/
int main(void)
{
spi_buffer_t spi_buffer[NUM_SPI_BUS];
rgb_led_t led_array[NUM_LEDS];
uint32_t current_limit;
float dim;
// Configure on-board LED-pins as outputs.
LEDS_CONFIGURE(LEDS_MASK);
// Initialize spi I/F
for(uint8_t i=0;i<NUM_SPI_BUS;i++) {
ws2812b_driver_spi_init(i, &spi[i]);
}
for(uint8_t i=0;i<NUM_SPI_BUS;i++) {
alloc_spi_buffer(&spi_buffer[i], NUM_LEDS);
}
LEDS_ON(1 << leds_list[0]);
LEDS_ON(1 << leds_list[1]);
LEDS_ON(1 << leds_list[2]);
LEDS_ON(1 << leds_list[3]);
for(;;)
{
LEDS_INVERT(1 << leds_list[2]);
for(int8_t idemo=0;idemo<size_of_list;idemo++)
{
LEDS_INVERT(1 << leds_list[1]);
demo_list[idemo].function_init();
int32_t rest = demo_list[idemo].demo_period;
int32_t rap = 0;
int32_t step = demo_list[idemo].wait_ms + demo_list[idemo].process_time;
while( rest > 0 )
{
LEDS_INVERT(1 << leds_list[0]);
// animate and set up led_array_work
demo_list[idemo].function_update(led_array,rap);
// dim LEDs until current limit
current_limit = CURRENT_LIMIT;
ws2812b_driver_current_cap(led_array, NUM_LEDS, current_limit);
// fade in/out effect
if ( (demo_list[idemo].demo_period - rest) < FADE_IN_MS )
{
dim = (float)0.01+((float)0.99 * ((demo_list[idemo].demo_period - rest)/(float)FADE_IN_MS));
}
else if ( rest < FADE_IN_MS)
{
dim = (float)0.01+((float)0.99 * (rest/(float)FADE_IN_MS));
}
if ( dim > (float)1.0 ) {
dim = 1.0;
}
ws2812b_driver_dim(led_array, NUM_LEDS, dim);
// LED update
ws2812b_driver_xfer(led_array, spi_buffer[0], spi[0]);
// delay (LED will be updated this period)
nrf_delay_ms(demo_list[idemo].wait_ms);
//
rest -= step;
rap += step;
}
// blank 3sec. between demos
set_blank(led_array,NUM_LEDS);
ws2812b_driver_xfer(led_array, spi_buffer[0], spi[0]);
// delay (LED will be updated this period)
nrf_delay_ms(3000);
} // idemo
} // end-less loop
}
