/************************************************************************
* Name : led_test_case_005
* Function :
* Arguments
* input : null
* output : null
*
* Return : 0 - ok
* else - fail
* Decription : 测试led_id灯的呼吸模式控制功能
************************************************************************/
int led_test_case_005(int led_id)
{
int ret = LED_ERROR;
unsigned long full_onoff, fade_onoff = LED_BREATH_FADEONOFF_MAX;
struct balong_led_device *led = NULL;
led = (struct balong_led_device *)platform_get_drvdata(&balong_led_dev);
if(!led)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"get balong led device failed.\n");
return LED_ERROR;
}
/* set brightness */
if((0 == led_id) || (1 == led_id))
{
full_onoff = LED_BREATH_FULLONOFF_MAX_DR12;
}
else
{
full_onoff = LED_BREATH_FULLONOFF_MAX_DR345;
}
ret = led[led_id].pdata->led_breath_set(&(led[led_id].cdev),
&full_onoff, &full_onoff, &fade_onoff, &fade_onoff);
if(ret)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"\n[%s]ERROR:led id %d, set blink error, ret %d\n",
__FUNCTION__, led_id + 1, ret);
return LED_ERROR;
}
return LED_OK;
}
/************************************************************************
* Name : do_led_tled_test_case
* Function : 测试A核三色灯闪烁功能
* Arguments
* input : new_state - new status
* output : null
*
* Return : 0 - ok
* else - fail
* Decription : 不涉及核间通信，只测试A核三色灯闪灯方案
************************************************************************/
int do_led_tled_test_case(unsigned long new_state)
{
int ret = LED_ERROR;
struct balong_led_device *led = NULL;
led = (struct balong_led_device *)platform_get_drvdata(&balong_led_dev);
if(!led)
{
LED_TRACE(LED_DEBUG_LEVEL(ALWAYS),"get balong led device failed.\n");
goto ERRO;
}
g_arg.new_state = (unsigned char)new_state;
g_arg.ctl = MNTN_LED_STATUS_FLUSH;
ret = do_led_threecolor_flush();
if(ret)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR), "[%s]three color led flush failed, ret = %d!\n", __FUNCTION__, ret);
return ret;
}
return ret;
ERRO:
return ret;
}
/************************************************************************
* Name : led_test_case_001
* Function :
* Arguments
* input : led_id:0~4
* output : null
*
* Return : 0 - ok
* else - fail
* Decription : 测试id为led_id灯的亮度控制功能。
************************************************************************/
int led_test_case_001(int led_id)
{
int ret = LED_ERROR;
enum led_brightness brightness;
struct balong_led_device *led = NULL;
led = (struct balong_led_device *)platform_get_drvdata(&balong_led_dev);
if(!led)
{
LED_TRACE(LED_DEBUG_LEVEL(ALWAYS),"get balong led device failed.\n");
return LED_ERROR;
}
/* test every brightness for a certain led, including two illegal brightness*/
/*lint -save -e685*/
for(brightness = LED_OFF; brightness <= LED_FULL ; brightness++)
{
LED_TRACE(LED_DEBUG_LEVEL(INFO),"\n[%s] ===TEST=== led id %d, brightness %d\n",
__FUNCTION__, led_id, brightness);
led[led_id].cdev.brightness_set(&(led[led_id].cdev), brightness); /* set brightness */
ret = led[led_id].cdev.brightness_get(&(led[led_id].cdev));
if(ret != brightness)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"\n[%s]ERROR:led id %d, brightness set %d, get %d\n",
__FUNCTION__, led_id + 1, brightness, ret);
return LED_ERROR;
}
}
/*lint -restore*/
return LED_OK;
}
/************************************************************************
*函数原型 ： static int assemble_container(const char * cmd_obj)
*描述 ： 属性路径容器填充函数
*输入 ： 无
*输出 ： 无
*返回值 ： BR_OK OR BR_ERRO
*修改历史 :
1.日 期 : 20131205
修改内容 : 新生成函数
*************************************************************************/
PRIVATE int assemble_container(const char * cmd_obj)
{
int len = 0;
if(!cmd_obj)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] arguments is NULL\n", __FUNCTION__);
return BR_ERROR;
}
/* 置空容器 */
(void)memset(path_container, 0x0, CONTAINER_LEN);/*lint !e506*/
if(BREATH_DR_BOTTOM <= led_attr_default.led_dr || BREATH_DR01 > led_attr_default.led_dr)
{
printk(KERN_ERR"[*Breath-Led*] %s: PMU DR selected %d error.\n", __func__, led_attr_default.led_dr);
return BR_ERROR;
}
/* 填充容器 */
len = snprintf(path_container, CONTAINER_LEN, container_format, led_attr_default.led_dr, cmd_obj);
if(len < 0)
{
printk(KERN_ERR"[*Breath-Led*] %s: assemble %s failed.\n", __func__, cmd_obj);
return BR_ERROR;
}
return BR_OK;
}
/************************************************************************
*函数原型 ： enum led_brightness led_dr_brightness_get(struct led_classdev *led_cdev)
*描述 ： 用户态操作DR灯开始闪烁的接口
*输入 ： 无
*输出 ： 无
*返回值 ： BR_OK OR BR_ERRO
*修改历史 :
1.日 期 : 20140620
修改内容 : 新生成函数
*************************************************************************/
enum led_brightness led_dr_brightness_get(struct led_classdev *led_cdev)
{
if(!led_cdev)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] arguments is NULL\n", __FUNCTION__);
return (enum led_brightness)BR_ERROR;
}
return (enum led_brightness)led_cdev->brightness;
}
/************************************************************************
*函数原型 ： int change_name(struct led_classdev *led_cdev)
*描述 ： 将用户态操作的节点名称转换成海思注册的Balong_dr*的名称,用于访问海思注册的dr灯节点
*输入 ： 用户态操作的节点信息
*输出 ： 无
*返回值 ： BR_OK OR BR_ERRO
*修改历史 :
1.日 期 : 20140620
修改内容 : 新生成函数
*************************************************************************/
int change_name(struct led_classdev *led_cdev)
{
/* reject null */
if(!led_cdev || !led_cdev->name)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] arguments is NULL\n", __FUNCTION__);
return BR_ERROR;
}
LED_TRACE(LED_DEBUG_LEVEL(INFO),"[%s] led name %s\n", __FUNCTION__, led_cdev->name);
if(!strcmp(led_cdev->name, LED_NODE_1))
{
g_dr_name = LED_NAME_1;
return BR_OK;
}
else if(!strcmp(led_cdev->name, LED_NODE_2))
{
g_dr_name = LED_NAME_2;
return BR_OK;
}
else if(!strcmp(led_cdev->name, LED_NODE_3))
{
g_dr_name = LED_NAME_3;
return BR_OK;
}
else if(!strcmp(led_cdev->name, LED_NODE_4))
{
g_dr_name = LED_NAME_4;
return BR_OK;
}
else if(!strcmp(led_cdev->name, LED_NODE_5))
{
g_dr_name = LED_NAME_5;
return BR_OK;
}
else
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] match the led name failedn", __FUNCTION__);
return BR_ERROR;
}
}
/*******************************************************************************
* FUNC NAME:
* led_softtimer_create()
* Function : 创建软timer
* Arguments
* input : @timer - timer的定时时间
* @wake_type - timer对CPU的唤醒类型
* output : null
*
* Return : LED_OK - 成功；else - 失败
* Decription : null
************************************************************************/
int led_softtimer_create(unsigned int time, enum wakeup wake_type)
{
led_softtimer.func = (softtimer_func)led_state_check_callback;
led_softtimer.para = 0;
led_softtimer.timeout = time; /* 定时长度，单位ms */
led_softtimer.wake_type = wake_type;
if (bsp_softtimer_create(&led_softtimer))
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s]ERROR: softtimer create failed\n", __FUNCTION__);
return LED_ERROR;
}
bsp_softtimer_add(&led_softtimer);
LED_TRACE(LED_DEBUG_LEVEL(INFO), "LED create softtimer OK\n");
return LED_OK;
}
/*******************************************************************************
* FUNC NAME:
* bsp_led_init()
* Function : c核led初始化函数
* Arguments
* input : null
* output : null
*
* Return : LED_OK - 成功；else - 失败
* Decription :
************************************************************************/
int bsp_led_init(void)
{
int ret = LED_ERROR;
/* 初始化上层工作状态 */
g_cur_work_state = LED_LIGHT_STATE_MAX;
p_func_tled_state_get = (pFUNCPTR)led_default_callback;
/* 创建软timer(不唤醒)，注册回调函数 */
ret = led_softtimer_create(LED_TIME_BASE_UNIT, SOFTTIMER_NOWAKE);
if(ret != LED_OK)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] softtimer create failed, ret = 0x%x\n", __FUNCTION__, ret);
return ret;
}
LED_TRACE(LED_DEBUG_LEVEL(ALWAYS), "LED init OK\n");
return ret;
}
/*******************************************************************************
* FUNC NAME:
* led_state_check_callback() - C核软timer回调函数
* Function :
* Arguments
* input : null
* output : null
*
* Return : null
* Decription :
************************************************************************/
void led_state_check_callback(void)
{
int ret = LED_ERROR;
/* 获取上层状态 */
if (NULL != p_func_tled_state_get)
{
g_new_work_state = (unsigned char)((*p_func_tled_state_get)());
}
else
{
return;
}
LED_TRACE(LED_DEBUG_LEVEL(INFO), "[%s]LED get new state success, new state %d\n", __FUNCTION__, g_new_work_state);
/* 与当前状态进行比较，若不同，则更新当前状态并通知A核闪灯 */
if(g_cur_work_state != g_new_work_state)
{
ret = bsp_icc_send(ICC_CPU_APP, LED_ICC_CHN_ID, (unsigned char*)&g_new_work_state, sizeof(unsigned char));
if(ret != (int)sizeof(unsigned char))
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR), "[%s]icc send failed, new state %d, length %d\n",
__FUNCTION__, g_new_work_state, ret);
return;
}
LED_TRACE(LED_DEBUG_LEVEL(INFO), "[%s]icc send success, new state %d\n", __FUNCTION__, g_new_work_state);
g_cur_work_state = g_new_work_state;
}
LED_TRACE(LED_DEBUG_LEVEL(INFO), "[%s]LED same state, skip\n", __FUNCTION__);
bsp_softtimer_add(&led_softtimer);
return;
}
/************************************************************************
* Name : led_tled_test_case_016
* Function : 测试三色灯部分颜色变化功能 - 从白色到白色
* Arguments
* input : @state - 工作状态
* output : null
*
* Return : 0 - ok
* Decription : 需要测试人员观察灯的状态来判断是否测试ok
************************************************************************/
int led_tled_test_case_016(unsigned long state)
{
led_save_for_test();
if(state < LED_LIGHT_STATE_MAX)
{
return do_led_tled_test_case(state);
}
else
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"ERROR: invalid state %d\n", state);
return LED_ERROR;
}
}
/************************************************************************
* Name : led_test_case_003
* Function :
* Arguments
* input : null
* output : null
*
* Return : 0 - ok
* else - fail
* Decription : 测试led_id灯的闪烁模式控制功能
************************************************************************/
int led_test_case_003(int led_id)
{
int ret = LED_ERROR;
unsigned long full_on = LED_BLINK_FULLON_MAX, full_off = LED_BLINK_PERIOD_MAX - LED_BLINK_FULLON_MAX;
struct balong_led_device *led = NULL;
led = (struct balong_led_device *)platform_get_drvdata(&balong_led_dev);
if(!led)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"get balong led device failed.\n");
return LED_ERROR;
}
/* set brightness */
ret = led[led_id].cdev.blink_set(&(led[led_id].cdev), &full_on, &full_off);
if(ret)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"\n[%s]ERROR:led id %d, set blink error, ret %d\n",
__FUNCTION__, led_id + 1, ret);
return LED_ERROR;
}
return LED_OK;
}
/************************************************************************
* Name : led_test_case_002
* Function :
* Arguments
* input : null
* output : null
*
* Return : 0 - ok
* else - fail
* Decription : 测试每个led灯的亮度设置
************************************************************************/
int led_test_case_002(void)
{
int led_id;
int ret;
for(led_id = 0; led_id < LED_ID_MAX; led_id++)
{
ret = led_test_case_001(led_id);
if(ret != LED_OK)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"\n[%s]ERROR:led id %d, ret %d\n",
__FUNCTION__, led_id + 1, ret);
return LED_ERROR;
}
}
return LED_OK;
}
/************************************************************************
*函数原型 ： static int assemble_container_dr(const char * cmd_obj)
*描述 ： 属性路径容器填充函数
*输入 ： cmd_obj 需要填充的属性
*输出 ： 无
*返回值 ： BR_OK OR BR_ERRO
*修改历史 :
1.日 期 : 20140620
修改内容 : 新生成函数
*************************************************************************/
PRIVATE int assemble_container_dr(const char * cmd_obj)
{
int len = 0;
if(!cmd_obj)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] arguments is NULL\n", __FUNCTION__);
return BR_ERROR;
}
/* 置空容器 */
(void)memset(path_container,0x0, CONTAINER_LEN);/*lint !e160 !e506*/
/* 填充容器 */
len = snprintf(path_container, CONTAINER_LEN, container_format, g_dr_name, cmd_obj);
if(len < 0)
{
printk(KERN_ERR"[*Breath-Led*] %s: assemble %s failed.\n", __func__, cmd_obj);
return BR_ERROR;
}
return BR_OK;
}
/************************************************************************
*函数原型 ： int led_dr_breath_set(struct led_classdev *led_cdev, unsigned long *full_on, unsigned long *full_off, unsigned long *fade_on, unsigned long *fade_off)
*描述 ： 用户态操作DR灯开始呼吸的接口
*输入 ： 无
*输出 ： 无
*返回值 ： BR_OK OR BR_ERRO
*修改历史 :
1.日 期 : 20140620
修改内容 : 新生成函数
*************************************************************************/
int led_dr_breath_set(struct led_classdev *led_cdev, unsigned long *full_on, unsigned long *full_off, unsigned long *fade_on, unsigned long *fade_off)
{
int ret = BR_ERROR;
/* argument check */
if((!led_cdev) || (!full_on) || (!full_off) || (!fade_on) || (!fade_off))
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] arguments is NULL\n", __FUNCTION__);
return BR_ERROR;
}
led_cdev->breath_full_on = *full_on;
led_cdev->breath_full_off = *full_off;
led_cdev->breath_fade_on = *fade_on;
led_cdev->breath_fade_off = *fade_off;
ret = change_name(led_cdev);
if(BR_ERROR == ret)
{
return ret;
}
g_dr_brightness[g_dr_name - 1] = -1; /*亮度值复位*/
ret = led_dr_trigger_hold();
if(BR_ERROR == ret)
{
return ret;
}
/*应用层下发的时间参数是毫秒级的，而底层定义的参数是微秒级的，在用户态参数传入的时候需要转换*/
ret = set_led_dr_attr(BRT_ATTR_FULL_ON, (led_cdev->breath_full_on)*1000);
if(BR_ERROR == ret)
{
return ret;
}
ret = set_led_dr_attr(BRT_ATTR_FULL_OFF, (led_cdev->breath_full_off)*1000);
if(BR_ERROR == ret)
{
return ret;
}
ret = set_led_dr_attr(BRT_ATTR_FADE_ON, (led_cdev->breath_fade_on)*1000);
if(BR_ERROR == ret)
{
return ret;
}
ret = set_led_dr_attr(BRT_ATTR_FADE_OFF, (led_cdev->breath_fade_off)*1000);
if(BR_ERROR == ret)
{
return ret;
}
/*时间赋值完毕进入亮度设置*/
if ((led_cdev->breath_full_on)&&(led_cdev->breath_full_off)&&(led_cdev->breath_fade_on)&&(led_cdev->breath_fade_off))
{
if ((0 == led_cdev->brightness) || (1 == led_cdev->brightness))
{
if(LED_NAME_2 < g_dr_name)
{
ret = set_led_dr_attr(BRT_ATTR_BRIGHTNESS, DR345_BRIGHTNESS_3MA);
}
else
{
ret = set_led_dr_attr(BRT_ATTR_BRIGHTNESS, DR12_BRIGHTNESS_3MA);
}
}
else
{
ret = set_led_dr_attr(BRT_ATTR_BRIGHTNESS, led_cdev->brightness);
}
if(BR_ERROR == ret)
{
return ret;
}
}
return BR_OK;
}
/************************************************************************
*函数原型 ： void led_dr_work(struct work_struct *work)
*描述 ： DR灯亮灭接口工作队列
*输入 ： 无
*输出 ： 无
*返回值 ： 无
*修改历史 :
1.日 期 : 20140809
修改内容 : 新生成函数
*************************************************************************/
static void led_dr_work(struct work_struct *work)
{
int ret = BR_ERROR;
unsigned long time_local = 0;
int brightness = 0;
struct balong_led_device *led_dat = NULL;
struct led_classdev *led_cdev = NULL;
mutex_lock(&led_dr_mutex);
led_dat = container_of(work, struct balong_led_device, work);
led_cdev = &(led_dat->cdev);
brightness = led_dat->brightness;
if(!led_cdev)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] arguments is NULL\n", __FUNCTION__);
goto out;
}
ret = change_name(led_cdev);
if(BR_ERROR == ret)
{
goto out;
}
if (brightness >= LED_FULL)
{
brightness = LED_FULL;
}
if(1 == brightness)
{
if(LED_NAME_2 < g_dr_name)
{
#ifdef BSP_CONFIG_BOARD_E5
brightness = DR345_BRIGHTNESS_4_5MA;
#else
brightness = DR345_BRIGHTNESS_3MA;
#endif
}
else
{
brightness = DR12_BRIGHTNESS_3MA;
}
}
if(g_dr_brightness[g_dr_name - 1] == brightness) /*重复设置亮度*/
{
goto out;
}
g_dr_brightness[g_dr_name - 1] = brightness; /*亮度值更新*/
ret = led_dr_trigger_hold();
if(BR_ERROR == ret)
{
goto out;
}
/*设置灯的状态为长灭*/
if (LED_OFF == brightness)
{
ret = set_led_dr_attr(BRT_ATTR_FULL_ON, time_local);
if(BR_ERROR == ret)
{
printk(KERN_ERR"[*Breath-Led*] %s: set_led_dr_attr(BRT_ATTR_FULL_ON,time_local) failded.\n", __func__);
goto out;
}
ret = set_led_dr_attr(BRT_ATTR_FULL_OFF, LED_LONG_TIME);
if(BR_ERROR == ret)
{
printk(KERN_ERR"[*Breath-Led*] %s: set_led_dr_attr(BRT_ATTR_FULL_OFF, LED_LONG_TIME) failded.\n", __func__);
goto out;
}
}
/*设置灯的状态为长亮*/
else
{
ret = set_led_dr_attr(BRT_ATTR_FULL_ON, LED_LONG_TIME);
if(BR_ERROR == ret)
{
printk(KERN_ERR"[*Breath-Led*] %s: set_led_dr_attr(BRT_ATTR_FULL_ON, LED_LONG_TIME) failded.\n", __func__);
goto out;
}
ret = set_led_dr_attr(BRT_ATTR_FULL_OFF, time_local);
if(BR_ERROR == ret)
{
printk(KERN_ERR"[*Breath-Led*] %s: set_led_dr_attr(BRT_ATTR_FULL_OFF, time_local) failded.\n", __func__);
goto out;
}
}
ret = set_led_dr_attr(BRT_ATTR_FADE_ON, time_local);
if(BR_ERROR == ret)
{
goto out;
}
ret = set_led_dr_attr(BRT_ATTR_FADE_OFF, time_local);
if(BR_ERROR == ret)
{
goto out;
}
ret = set_led_dr_attr(BRT_ATTR_BRIGHTNESS, brightness);
if(BR_ERROR == ret)
{
goto out;
}
out:
mutex_unlock(&led_dr_mutex);
}
/*lint -e54 -e119 -e30 -e84 -e514 */
static int led_dr_probe(struct platform_device *dev)
{
int ret = 0;
unsigned int i = 0;
struct led_platform_data *pdata = dev->dev.platform_data;
struct balong_led_device *led= NULL;
led = (struct balong_led_device *)kzalloc(sizeof(struct balong_led_device)*ARRAY_SIZE(led_dr) , GFP_KERNEL);
if(!led)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] get buffer failed\n", __FUNCTION__);
goto ERRO;
}
for(i = 0; i < (int)ARRAY_SIZE(led_dr); i++)
{
led[i].pdata =(struct balong_led_platdata*)kzalloc(sizeof(struct balong_led_platdata), GFP_KERNEL);
if(!led[i].pdata)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s] get pdata buffer failed\n", __FUNCTION__);
goto ERRO;
}
led[i].cdev.name = pdata->leds[i].name;
led[i].pdata->led_breath_set = led_dr_breath_set;
led[i].cdev.brightness_set = led_dr_brightness_set;
led[i].cdev.brightness_get = led_dr_brightness_get;
led[i].cdev.blink_set = led_dr_led_blink_set;
led[i].cdev.default_trigger = pdata->leds[i].default_trigger;
led[i].cdev.flags = 0;
INIT_WORK(&(led[i].work), led_dr_work);
ret = led_classdev_register(&dev->dev, &(led[i].cdev));
if(ret)
{
LED_TRACE(LED_DEBUG_LEVEL(ERROR),"[%s]led%d sysfs register failed\n", __FUNCTION__,i + 1);
}
}
platform_set_drvdata(dev, led);/*lint !e534*/
return ret;
ERRO:
for(i = 0; i < ARRAY_SIZE(led_dr); i++)
{
if(!led)
{
continue;
}
if(led[i].pdata)
{
kfree(led[i].pdata);
led[i].pdata = NULL;
}
}
if(led)
{
kfree(led);
led = NULL;
}
LED_TRACE(LED_DEBUG_LEVEL(ALWAYS),"LED init failed\n");
return BR_ERROR;
}
/****************************************************************************
函 数 名 : drv_led_state_func_reg
功能描述 : 本接口为提供给协议栈的钩子函数，用于获取协议栈的点灯状态。
输入参数 : 协议栈获取点灯状态函数的指针。
输出参数 : 无。
返 回 值 : 无。
注意事项 : 无。
******************************************************************************/
void drv_led_state_func_reg (pFUNCPTR p)
{
LED_TRACE(LED_DEBUG_LEVEL(INFO), "LED state_func_reg, 0x%x\n", p);
p_func_tled_state_get = p;
}
