int main() {
// Setup the variables we will need.
int r = 0; // For checking return values
HANDLE devHandle = 0;
BYTE sendBuffer[CONFIGU6_COMMAND_LENGTH], recBuffer[CONFIGU6_RESPONSE_LENGTH];
// Open the U6
devHandle = LJUSB_OpenDevice(1, 0, U6_PRODUCT_ID);
if( devHandle == NULL ) {
printf("Couldn't open U6. Please connect one and try again.\n");
exit(-1);
}
// Builds the ConfigU6 command
buildConfigU6Bytes(sendBuffer);
// Write the command to the device.
// LJUSB_Write( handle, sendBuffer, length of sendBuffer )
r = LJUSB_Write( devHandle, sendBuffer, CONFIGU6_COMMAND_LENGTH );
if( r != CONFIGU6_COMMAND_LENGTH ) {
printf("An error occurred when trying to write the buffer. The error was: %d\n", errno);
// *Always* close the device when you error out.
LJUSB_CloseDevice(devHandle);
exit(-1);
}
// Read the result from the device.
// LJUSB_Read( handle, recBuffer, number of bytes to read)
r = LJUSB_Read( devHandle, recBuffer, CONFIGU6_RESPONSE_LENGTH );
if( r != CONFIGU6_RESPONSE_LENGTH ) {
printf("An error occurred when trying to read from the U6. The error was: %d\n", errno);
LJUSB_CloseDevice(devHandle);
exit(-1);
}
// Check the command for errors
if( checkResponseForErrors(recBuffer) != 0 ){
LJUSB_CloseDevice(devHandle);
exit(-1);
}
// Parse the response into something useful
parseConfigU6Bytes(recBuffer);
//Close the device.
LJUSB_CloseDevice(devHandle);
return 0;
}
HANDLE openUSBConnection(int localID)
{
BYTE sendBuffer[26], recBuffer[38];
uint16 checksumTotal = 0;
HANDLE hDevice = 0;
uint32 numDevices = 0;
uint32 dev;
int i;
numDevices = LJUSB_GetDevCount(U6_PRODUCT_ID);
if(numDevices == 0)
{
printf("Open error: No U6 devices could be found\n");
return NULL;
}
for(dev = 1; dev <= numDevices; dev++)
{
hDevice = LJUSB_OpenDevice(dev, 0, U6_PRODUCT_ID);
if(hDevice != NULL)
{
if(localID < 0)
{
return hDevice;
}
else
{
checksumTotal = 0;
//setting up a U6Config
sendBuffer[1] = (uint8)(0xF8);
sendBuffer[2] = (uint8)(0x0A);
sendBuffer[3] = (uint8)(0x08);
for(i = 6; i < 26; i++)
sendBuffer[i] = (uint8)(0x00);
extendedChecksum(sendBuffer, 26);
if(LJUSB_BulkWrite(hDevice, U6_PIPE_EP1_OUT, sendBuffer, 26) != 26)
goto locid_error;
if(LJUSB_BulkRead(hDevice, U6_PIPE_EP2_IN, recBuffer, 38) != 38)
goto locid_error;
checksumTotal = extendedChecksum16(recBuffer, 38);
if( (uint8)((checksumTotal / 256) & 0xff) != recBuffer[5])
goto locid_error;
if( (uint8)(checksumTotal & 0xff) != recBuffer[4])
goto locid_error;
if( extendedChecksum8(recBuffer) != recBuffer[0])
goto locid_error;
if( recBuffer[1] != (uint8)(0xF8) || recBuffer[2] != (uint8)(0x10) ||
recBuffer[3] != (uint8)(0x08) )
goto locid_error;
if( recBuffer[6] != 0)
goto locid_error;
if( (int)recBuffer[21] == localID)
return hDevice;
else
LJUSB_CloseDevice(hDevice);
} //else localID >= 0 end
} //if hDevice != NULL end
} //for end
printf("Open error: could not find a U6 with a local ID of %d\n", localID);
return NULL;
locid_error:
printf("Open error: problem when checking local ID\n");
return NULL;
}
HANDLE openUSBConnection(int localID)
{
BYTE buffer[38];
uint16 checksumTotal = 0;
HANDLE hDevice = 0;
uint32 numDevices = 0;
uint32 dev;
int i;
numDevices = LJUSB_GetDevCount(UE9_PRODUCT_ID);
if(numDevices == 0)
{
printf("Open error: No UE9 devices could be found\n");
return NULL;
}
for(dev = 1; dev <= numDevices; dev++)
{
hDevice = LJUSB_OpenDevice(dev, 0, UE9_PRODUCT_ID);
if(hDevice != NULL)
{
if(localID < 0)
{
return hDevice;
}
else
{
checksumTotal = 0;
//setting up a CommConfig command
buffer[1] = (BYTE)(0x78);
buffer[2] = (BYTE)(0x10);
buffer[3] = (BYTE)(0x01);
for(i = 6; i < 38; i++)
buffer[i] = (BYTE)(0x00);
extendedChecksum(buffer,38);
if(LJUSB_BulkWrite(hDevice, UE9_PIPE_EP1_OUT, buffer, 38) != 38)
goto locid_error;
for(i = 0; i < 38; i++)
buffer[i] = 0;
if(LJUSB_BulkRead(hDevice, UE9_PIPE_EP1_IN, buffer, 38) != 38)
goto locid_error;
checksumTotal = extendedChecksum16(buffer, 38);
if( (BYTE)((checksumTotal / 256) & 0xff) != buffer[5])
goto locid_error;
if( (BYTE)(checksumTotal & 0xff) != buffer[4])
goto locid_error;
if( extendedChecksum8(buffer) != buffer[0])
goto locid_error;
if( buffer[1] != (BYTE)(0x78) || buffer[2] != (BYTE)(0x10) || buffer[3] != (BYTE)(0x01) )
goto locid_error;
if( (int)buffer[8] == localID)
return hDevice;
else
LJUSB_CloseDevice(hDevice);
} //else localID >= 0 end
} //if hDevice != NULL end
} //for end
printf("Open error: could not find a UE9 with a local ID of %d\n", localID);
return NULL;
locid_error:
printf("Open error: problem when checking local ID\n");
return NULL;
}
HANDLE openUSBConnection(int localID)
{
BYTE buffer[38];
uint16 checksumTotal = 0;
uint32 numDevices = 0;
uint32 dev;
int i, serial;
HANDLE hDevice = 0;
numDevices = LJUSB_GetDevCount(UE9_PRODUCT_ID);
if( numDevices == 0 )
{
printf("Open error: No UE9 devices could be found\n");
return NULL;
}
for( dev = 1; dev <= numDevices; dev++ )
{
hDevice = LJUSB_OpenDevice(dev, 0, UE9_PRODUCT_ID);
if( hDevice != NULL )
{
if( localID < 0 )
{
return hDevice;
}
else
{
checksumTotal = 0;
//Setting up a CommConfig command
buffer[1] = (BYTE)(0x78);
buffer[2] = (BYTE)(0x10);
buffer[3] = (BYTE)(0x01);
for( i = 6; i < 38; i++ )
buffer[i] = (BYTE)(0x00);
extendedChecksum(buffer,38);
if( LJUSB_Write(hDevice, buffer, 38) != 38 )
goto locid_error;
for( i = 0; i < 38; i++ )
buffer[i] = 0;
if( LJUSB_Read(hDevice, buffer, 38) != 38 )
goto locid_error;
checksumTotal = extendedChecksum16(buffer, 38);
if( (BYTE)((checksumTotal / 256) & 0xFF) != buffer[5] )
goto locid_error;
if( (BYTE)(checksumTotal & 0xFF) != buffer[4] )
goto locid_error;
if( extendedChecksum8(buffer) != buffer[0] )
goto locid_error;
if( buffer[1] != (BYTE)(0x78) || buffer[2] != (BYTE)(0x10) || buffer[3] != (BYTE)(0x01) )
goto locid_error;
//Check local ID
if( (int)buffer[8] == localID )
return hDevice;
//Check serial number
serial = buffer[28] + buffer[29]*256 + buffer[30]*65536 + 0x10000000;
if( serial == localID )
return hDevice;
//No matches. Not our device.
LJUSB_CloseDevice(hDevice);
} //else localID >= 0 end
} //if hDevice != NULL end
} //for end
printf("Open error: could not find a UE9 with a local ID or serial number of %d\n", localID);
return NULL;
locid_error:
printf("Open error: problem when checking local ID and serial number\n");
return NULL;
}
