void World6::rotate_planets()
{
m_dayPeriodSun = new CLerpNodePathInterval("dayPeriodSunInterval",
20,
CLerpInterval::BT_no_blend,
true,
false,
m_sun,
NodePath());
m_dayPeriodSun->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodSun->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodMercury =
new CLerpNodePathInterval("orbitPeriodMercuryInterval",
0.241 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootMercury,
NodePath());
m_orbitPeriodMercury->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodMercury->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodMercury = new CLerpNodePathInterval("dayPeriodMercuryInterval",
59 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_mercury,
NodePath());
m_dayPeriodMercury->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodMercury->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodVenus = new CLerpNodePathInterval("orbitPeriodVenusInterval",
0.615 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootVenus,
NodePath());
m_orbitPeriodVenus->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodVenus->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodVenus = new CLerpNodePathInterval("dayPeriodVenusInterval",
243 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_venus,
NodePath());
m_dayPeriodVenus->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodVenus->set_end_hpr (LVecBase3f(360, 0, 0));
// Here the earth interval has been changed to rotate like the rest of the
// planets and send a message before it starts turning again. To send a
// message, the call is simply messenger.send("message"). The "newYear"
// message is picked up by the accept("newYear"...) statement earlier, and
// calls the incYear function as a result
m_orbitPeriodEarth = new CLerpNodePathInterval("orbitPeriodEarthInterval",
m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootEarth,
NodePath());
m_orbitPeriodEarth->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodEarth->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodEarth->set_done_event("newYear");
m_dayPeriodEarth = new CLerpNodePathInterval("dayPeriodEarthInterval",
m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_earth,
NodePath());
m_dayPeriodEarth->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodEarth->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodMoon = new CLerpNodePathInterval("orbitPeriodMoonInterval",
0.0749 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootMoon,
NodePath());
m_orbitPeriodMoon->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodMoon->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodMoon = new CLerpNodePathInterval("dayPeriodMoonInterval",
0.0749 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_moon,
NodePath());
m_dayPeriodMoon->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodMoon->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodMars = new CLerpNodePathInterval("orbitPeriodMarsInterval",
1.881 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootMars,
NodePath());
m_orbitPeriodMars->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodMars->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodMars = new CLerpNodePathInterval("dayPeriodMarsInterval",
1.03 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_mars,
NodePath());
m_dayPeriodMars->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodMars->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodSun->loop();
m_orbitPeriodMercury->loop();
m_dayPeriodMercury->loop();
m_orbitPeriodVenus->loop();
m_dayPeriodVenus->loop();
m_orbitPeriodEarth->loop();
m_dayPeriodEarth->loop();
m_orbitPeriodMoon->loop();
m_dayPeriodMoon->loop();
m_orbitPeriodMars->loop();
m_dayPeriodMars->loop();
// Note: setup a task to step the interval manager
AsyncTaskManager::get_global_ptr()->add(
new GenericAsyncTask("intervalManagerTask", step_interval_manager, this));
}
World::World(WindowFramework* windowFrameworkPtr)
: m_windowFrameworkPtr(windowFrameworkPtr)
{
// preconditions
if(m_windowFrameworkPtr == NULL)
{
nout << "ERROR: World::World(WindowFramework* windowFrameworkPtr) parameter windowFrameworkPtr cannot be NULL." << endl;
return;
}
m_keyMap.resize(K_keys);
m_keyMap[K_left ] = false;
m_keyMap[K_right ] = false;
m_keyMap[K_forward ] = false;
m_keyMap[K_cam_left ] = false;
m_keyMap[K_cam_right] = false;
m_windowFrameworkPtr->set_background_type(WindowFramework::BT_black);
// Post the instructions
m_titleNp = add_title("Panda3D Tutorial: Roaming Ralph (Walking on Uneven Terrain)");
m_inst1Np = add_instructions(0.95, "[ESC]: Quit");
m_inst2Np = add_instructions(0.90, "[Left Arrow]: Rotate Ralph Left");
m_inst3Np = add_instructions(0.85, "[Right Arrow]: Rotate Ralph Right");
m_inst4Np = add_instructions(0.80, "[Up Arrow]: Run Ralph Forward");
m_inst6Np = add_instructions(0.70, "[A]: Rotate Camera Left");
m_inst7Np = add_instructions(0.65, "[S]: Rotate Camera Right");
// Set up the environment
//
// This environment model contains collision meshes. If you look
// in the egg file, you will see the following:
//
// <Collide> { Polyset keep descend }
//
// This tag causes the following mesh to be converted to a collision
// mesh -- a mesh which is optimized for collision, not rendering.
// It also keeps the original mesh, so there are now two copies ---
// one optimized for rendering, one for collisions.
NodePath modelsNp = m_windowFrameworkPtr->get_panda_framework()->get_models();
m_environNp = m_windowFrameworkPtr->load_model(modelsNp, "../models/world");
NodePath renderNp = m_windowFrameworkPtr->get_render();
m_environNp.reparent_to(renderNp);
m_environNp.set_pos(0,0,0);
// Create the main character, Ralph
LPoint3f ralphStartPos = m_environNp.find("**/start_point").get_pos();
CActor::AnimMap ralphAnims;
ralphAnims["../models/ralph-run"].push_back("run");
ralphAnims["../models/ralph-walk"].push_back("walk");
m_ralph.load_actor(m_windowFrameworkPtr,
"../models/ralph",
&ralphAnims,
PartGroup::HMF_ok_wrong_root_name|
PartGroup::HMF_ok_anim_extra|
PartGroup::HMF_ok_part_extra);
m_ralph.reparent_to(renderNp);
m_ralph.set_scale(0.2);
m_ralph.set_pos(ralphStartPos);
// Create a floater object. We use the "floater" as a temporary
// variable in a variety of calculations.
m_floaterNp = NodePath("floater");
m_floaterNp.reparent_to(renderNp);
// Accept the control keys for movement and rotation
m_windowFrameworkPtr->enable_keyboard();
m_windowFrameworkPtr->get_panda_framework()->define_key("escape" , "sysExit" , sys_exit , NULL);
m_windowFrameworkPtr->get_panda_framework()->define_key("arrow_left" , "left" , call_set_key<K_left , true >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("arrow_right" , "right" , call_set_key<K_right , true >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("arrow_up" , "forward" , call_set_key<K_forward , true >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("a" , "cam-left" , call_set_key<K_cam_left , true >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("s" , "cam-right" , call_set_key<K_cam_right, true >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("arrow_left-up" , "leftUp" , call_set_key<K_left , false>, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("arrow_right-up", "rightUp" , call_set_key<K_right , false>, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("arrow_up-up" , "forwardUp" , call_set_key<K_forward , false>, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("a-up" , "cam-leftUp" , call_set_key<K_cam_left , false>, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("s-up" , "cam-rightUp", call_set_key<K_cam_right, false>, this);
PT(GenericAsyncTask) taskPtr = new GenericAsyncTask("moveTask", call_move, this);
if(taskPtr != NULL)
{
AsyncTaskManager::get_global_ptr()->add(taskPtr);
}
// Game state variables
m_isMoving = false;
// Set up the camera
// Note: no need to disable the mouse in C++
NodePath cameraNp = m_windowFrameworkPtr->get_camera_group();
cameraNp.set_pos(m_ralph.get_x(), m_ralph.get_y()+10, 2);
// We will detect the height of the terrain by creating a collision
// ray and casting it downward toward the terrain. One ray will
// start above ralph's head, and the other will start above the camera.
// A ray may hit the terrain, or it may hit a rock or a tree. If it
// hits the terrain, we can detect the height. If it hits anything
// else, we rule that the move is illegal.
NodePath ralphGroundColNp;
m_ralphGroundRayPtr = new CollisionRay();
if(m_ralphGroundRayPtr != NULL)
{
m_ralphGroundRayPtr->set_origin(0, 0, 1000);
m_ralphGroundRayPtr->set_direction(0, 0, -1);
m_ralphGroundColPtr = new CollisionNode("ralphRay");
if(m_ralphGroundColPtr != NULL)
{
m_ralphGroundColPtr->add_solid(m_ralphGroundRayPtr);
m_ralphGroundColPtr->set_from_collide_mask(BitMask32::bit(0));
m_ralphGroundColPtr->set_into_collide_mask(BitMask32::all_off());
ralphGroundColNp = m_ralph.attach_new_node(m_ralphGroundColPtr);
m_ralphGroundHandlerPtr = new CollisionHandlerQueue();
if(m_ralphGroundHandlerPtr != NULL)
{
m_collisionTraverser.add_collider(ralphGroundColNp, m_ralphGroundHandlerPtr);
}
}
}
NodePath camGroundColNp;
m_camGroundRayPtr = new CollisionRay();
if(m_camGroundRayPtr != NULL)
{
m_camGroundRayPtr->set_origin(0, 0, 1000);
m_camGroundRayPtr->set_direction(0, 0, -1);
m_camGroundColPtr = new CollisionNode("camRay");
if(m_camGroundColPtr != NULL)
{
m_camGroundColPtr->add_solid(m_camGroundRayPtr);
m_camGroundColPtr->set_from_collide_mask(BitMask32::bit(0));
m_camGroundColPtr->set_into_collide_mask(BitMask32::all_off());
camGroundColNp = cameraNp.attach_new_node(m_camGroundColPtr);
m_camGroundHandlerPtr = new CollisionHandlerQueue();
if(m_camGroundHandlerPtr != NULL)
{
m_collisionTraverser.add_collider(camGroundColNp, m_camGroundHandlerPtr);
}
}
}
// Uncomment this line to see the collision rays
//ralphGroundColNp.show();
//camGroundColNp.show();
// Uncomment this line to show a visual representation of the
// collisions occuring
//m_collisionTraverser.show_collisions(renderNp);
// Create some lighting
PT(AmbientLight) ambientLightPtr = new AmbientLight("ambientLight");
if(ambientLightPtr != NULL)
{
ambientLightPtr->set_color(Colorf(.3, .3, .3, 1));
renderNp.set_light(renderNp.attach_new_node(ambientLightPtr));
}
PT(DirectionalLight) directionalLightPtr = new DirectionalLight("directionalLightPtr");
if(directionalLightPtr != NULL)
{
directionalLightPtr->set_direction(LVecBase3f(-5, -5, -5));
directionalLightPtr->set_color(Colorf(1, 1, 1, 1));
directionalLightPtr->set_specular_color(Colorf(1, 1, 1, 1));
renderNp.set_light(renderNp.attach_new_node(directionalLightPtr));
}
}
World::World(WindowFramework* windowFramework)
: m_windowFramework(windowFramework),
m_title(),
m_inst1(),
m_inst2(),
m_inst3(),
m_inst4(),
m_altCam(),
m_teapot(),
m_teapotInterval(),
m_bufferViewer(NULL)
// m_tvMen
{
// Note: set background color here
m_windowFramework->get_graphics_output()->get_active_display_region(0)->
set_clear_color(Colorf(0, 0, 0, 1));
// Post the instructions.
m_title = add_title("Panda3D: Tutorial - Using Render-to-Texture");
m_inst1 = add_instructions(0.95,"ESC: Quit");
m_inst2 = add_instructions(0.90,"Up/Down: Zoom in/out on the Teapot");
m_inst3 = add_instructions(0.85,"Left/Right: Move teapot left/right");
m_inst4 = add_instructions(0.80,"V: View the render-to-texture results");
//we get a handle to the default window
PT(GraphicsOutput) mainWindow = m_windowFramework->get_graphics_output();
// we now get buffer thats going to hold the texture of our new scene
PT(GraphicsOutput) altBuffer = mainWindow->make_texture_buffer(
"hello", 256, 256);
// now we have to setup a new scene graph to make this scene
NodePath altRender("new render");
// this takes care of setting up the camera properly
m_altCam = m_windowFramework->make_camera();
// Note: set the size and shape of the "film" within the lens equal to the
// buffer of our new scene
DCAST(Camera, m_altCam.node())->get_lens()->set_film_size(
altBuffer->get_x_size(), altBuffer->get_y_size());
// Note: make a DisplayRegion for the camera
PT(DisplayRegion) dr = altBuffer->make_display_region(0, 1, 0, 1);
dr->set_sort(0);
dr->set_camera(m_altCam);
m_altCam.reparent_to(altRender);
m_altCam.set_pos(0, -10, 0);
// get the teapot and rotates it for a simple animation
const NodePath& models =
m_windowFramework->get_panda_framework()->get_models();
m_teapot = m_windowFramework->load_model(models, "../models/teapot");
m_teapot.reparent_to(altRender);
m_teapot.set_pos(0, 0, -1);
const bool bakeInStart = true;
const bool fluid = false;
m_teapotInterval = new CLerpNodePathInterval("teapotInterval", 1.5,
CLerpInterval::BT_no_blend, bakeInStart, fluid, m_teapot, NodePath());
m_teapotInterval->set_start_hpr(m_teapot.get_hpr());
m_teapotInterval->set_end_hpr(LVecBase3f(m_teapot.get_h()+360,
m_teapot.get_p()+360,
m_teapot.get_r()+360));
m_teapotInterval->loop();
// put some lighting on the teapot
PT(DirectionalLight) dlight = new DirectionalLight("dlight");
PT(AmbientLight) alight = new AmbientLight("alight");
NodePath dlnp = altRender.attach_new_node(dlight);
NodePath alnp = altRender.attach_new_node(alight);
dlight->set_color(Colorf(0.8, 0.8, 0.5, 1));
alight->set_color(Colorf(0.2, 0.2, 0.2, 1));
dlnp.set_hpr(0, -60, 0);
altRender.set_light(dlnp);
altRender.set_light(alnp);
// Panda contains a built-in viewer that lets you view the results of
// your render-to-texture operations. This code configures the viewer.
WORLD_DEFINE_KEY("v", "toggleBufferViewer", toggle_buffer_viewer);
m_bufferViewer = new CBufferViewer(m_windowFramework);
m_bufferViewer->set_position(CBufferViewer::CP_llcorner);
m_bufferViewer->set_card_size(1.0, 0.0);
// Create the tv-men. Each TV-man will display the
// offscreen-texture on his TV screen.
make_tv_man(-5, 30, 1, altBuffer->get_texture(), 0.9);
make_tv_man( 5, 30, 1, altBuffer->get_texture(), 1.4);
make_tv_man( 0, 23, -3, altBuffer->get_texture(), 2.0);
make_tv_man(-5, 20, -6, altBuffer->get_texture(), 1.1);
make_tv_man( 5, 18, -5, altBuffer->get_texture(), 1.7);
WORLD_DEFINE_KEY("escape", "exit", quit);
WORLD_DEFINE_KEY("arrow_up", "zoomIn", zoom_in);
WORLD_DEFINE_KEY("arrow_down", "zoomOut", zoom_out);
WORLD_DEFINE_KEY("arrow_left", "moveLeft", move_left);
WORLD_DEFINE_KEY("arrow_right", "moveRight", move_right);
WORLD_ADD_TASK("worldAsyncTask", async_task);
}
World::World(WindowFramework* windowFrameworkPtr)
: m_windowFrameworkPtr(windowFrameworkPtr)
{
// preconditions
if(m_windowFrameworkPtr == NULL)
{
nout << "ERROR: parameter windowFrameworkPtr cannot be NULL." << endl;
return;
}
// This code puts the standard title and instruction text on screen
COnscreenText title("title", COnscreenText::TS_plain);
title.set_text("Panda3D: Tutorial - Joint Manipulation");
title.set_fg(Colorf(1,1,1,1));
title.set_pos(LVecBase2f(0.7, -0.95));
title.set_scale(0.07);
title.reparent_to(m_windowFrameworkPtr->get_aspect_2d());
m_titleNp = title.generate();
m_esckeyTextNp = gen_label_text("ESC: Quit" , 0);
m_onekeyTextNp = gen_label_text("[1]: Teapot" , 1);
m_twokeyTextNp = gen_label_text("[2]: Candy cane", 2);
m_threekeyTextNp = gen_label_text("[3]: Banana" , 3);
m_fourkeyTextNp = gen_label_text("[4]: Sword" , 4);
// setup key input
m_windowFrameworkPtr->enable_keyboard();
m_windowFrameworkPtr->get_panda_framework()->define_key("escape", "Exit" , sys_exit , NULL);
m_windowFrameworkPtr->get_panda_framework()->define_key("1" , "Teapot" , call_set_object<M_teapot >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("2" , "CandyCane", call_set_object<M_candy_cane>, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("3" , "Banana" , call_set_object<M_banana >, this);
m_windowFrameworkPtr->get_panda_framework()->define_key("4" , "Sword" , call_set_object<M_sword >, this);
// Disable mouse-based camera-control
// Note: disable by default in C++
// Position the camera
m_windowFrameworkPtr->get_camera_group().set_pos(0,-15, 2);
// Load our animated character
// Note: File eve_walk.egg is broken!
// The name of the animation is case sensitive and at line 13 of file
// eve_walk.egg you should read `Eve' instead of `eve'. You need to
// correct this in order to bind the animation automatically using
// auto_bind() or WindowFramework::loop_animations(). Or you can use
// PartGroup::HMF_ok_wrong_root_name to ask auto_bind() to be more
// forgiving.
CActor::AnimMap eveAnims;
eveAnims["../models/eve_walk"].push_back("walk");
m_eve.load_actor(m_windowFrameworkPtr,
"../models/eve",
&eveAnims,
PartGroup::HMF_ok_wrong_root_name);
// Put it in the scene
NodePath renderNp = m_windowFrameworkPtr->get_render();
m_eve.reparent_to(renderNp);
// Now we use control_joint to get a NodePath that's in control of her neck
// This must be done before any animations are played
m_eveNeckNp = m_eve.control_joint("Neck");
// We now play an animation. An animation must be played, or at least posed
// for the nodepath we just got from control_joint to actually effect the model
m_eve.find_anim("walk")->set_play_rate(2);
m_eve.loop("walk", true);
// Now we add a task that will take care of turning the head
PT(GenericAsyncTask) turnHeadTask = new GenericAsyncTask("turnHead", call_turn_head, this);
if(turnHeadTask != NULL)
{
AsyncTaskManager::get_global_ptr()->add(turnHeadTask);
}
// Now we will expose the joint the hand joint. ExposeJoint allows us to
// get the position of a joint while it is animating. This is different than
// control_joint which stops that joint from animating but lets us move it.
// This is particularly useful for putting an object (like a weapon) in an
// actor's hand
m_eveRightHandNp = m_eve.expose_joint("RightHand");
// This is a table with models, positions, rotations, and scales of objects to
// be attached to our exposed joint. These are stock models and so they needed
// to be repositioned to look right.
vector<ModelData> positions(M_models);
positions[M_teapot ] = ModelData("../models/teapot" , LVecBase3f(0.00,-0.66,-0.95), LVecBase3f(90, 0,90), 0.40);
positions[M_candy_cane] = ModelData("../models/candycane", LVecBase3f(0.15,-0.99,-0.22), LVecBase3f(90, 0,90), 1.00);
positions[M_banana ] = ModelData("../models/banana" , LVecBase3f(0.08,-0.10, 0.09), LVecBase3f( 0,-90, 0), 1.75);
positions[M_sword ] = ModelData("../models/sword" , LVecBase3f(0.11, 0.19, 0.06), LVecBase3f( 0, 0,90), 1.00);
// A list that will store our models objects
m_modelsNp.reserve(M_models);
NodePath modelsNp = m_windowFrameworkPtr->get_panda_framework()->get_models();
for(vector<ModelData>::iterator i = positions.begin(); i < positions.end(); ++i)
{
// Load the model
NodePath np = m_windowFrameworkPtr->load_model(modelsNp, i->m_filename);
// Position it
np.set_pos(i->m_pos);
// Rotate it
np.set_hpr(i->m_hpr);
// Scale it
np.set_scale(i->m_scale);
// Reparent the model to the exposed joint. That way when the joint moves,
// the model we just loaded will move with it.
np.reparent_to(m_eveRightHandNp);
// Add it to our models list
m_modelsNp.push_back(np);
}
// Make object 0 the first shown
set_object(M_teapot);
// Put in some default lighting
setup_lights();
}
World::World(WindowFramework* windowFrameworkPtr)
: UP(0,0,1),
m_windowFrameworkPtr(windowFrameworkPtr)
{
// preconditions
if(m_windowFrameworkPtr == NULL)
{
nout << "ERROR: parameter windowFrameworkPtr cannot be NULL." << endl;
return;
}
// This code puts the standard title and instruction text on screen
COnscreenText title("title", COnscreenText::TS_plain);
title.set_text("Panda3D: Tutorial - Collision Detection");
title.set_fg(Colorf(1,1,1,1));
title.set_pos(LVecBase2f(0.7,-0.95));
title.set_scale(0.07);
title.reparent_to(m_windowFrameworkPtr->get_aspect_2d());
m_titleNp = title.generate();
COnscreenText instructions("instructions");
instructions.set_text("Mouse pointer tilts the board");
instructions.set_pos(LVecBase2f(-1.3, 0.95));
instructions.set_fg(Colorf(1,1,1,1));
instructions.set_align(TextNode::A_left);
instructions.set_scale(0.05);
instructions.reparent_to(m_windowFrameworkPtr->get_aspect_2d());
m_instructionsNp = instructions.generate();
// Escape quits
m_windowFrameworkPtr->enable_keyboard();
m_windowFrameworkPtr->get_panda_framework()->define_key("escape", "sysExit", sys_exit, NULL);
// Disable mouse-based camera control
// Note: irrelevant in C++
// Place the camera
NodePath cameraNp = m_windowFrameworkPtr->get_camera_group();
cameraNp.set_pos_hpr(0, 0, 25, 0, -90, 0);
// Load the maze and place it in the scene
NodePath modelsNp = m_windowFrameworkPtr->get_panda_framework()->get_models();
m_mazeNp = m_windowFrameworkPtr->load_model(modelsNp, "../models/maze");
NodePath renderNp = m_windowFrameworkPtr->get_render();
m_mazeNp.reparent_to(renderNp);
// Most times, you want collisions to be tested against invisible geometry
// rather than every polygon. This is because testing against every polygon
// in the scene is usually too slow. You can have simplified or approximate
// geometry for the solids and still get good results.
//
// Sometimes you'll want to create and position your own collision solids in
// code, but it's often easier to have them built automatically. This can be
// done by adding special tags into an egg file. Check maze.egg and ball.egg
// and look for lines starting with <Collide>. The part is brackets tells
// Panda exactly what to do. Polyset means to use the polygons in that group
// as solids, while Sphere tells panda to make a collision sphere around them
// Keep means to keep the polygons in the group as visable geometry (good
// for the ball, not for the triggers), and descend means to make sure that
// the settings are applied to any subgroups.
//
// Once we have the collision tags in the models, we can get to them using
// NodePath's find command
// Find the collision node named wall_collide
m_wallsNp = m_mazeNp.find("**/wall_collide");
// Collision objects are sorted using BitMasks. BitMasks are ordinary numbers
// with extra methods for working with them as binary bits. Every collision
// solid has both a from mask and an into mask. Before Panda tests two
// objects, it checks to make sure that the from and into collision masks
// have at least one bit in common. That way things that shouldn't interact
// won't. Normal model nodes have collision masks as well. By default they
// are set to bit 20. If you want to collide against actual visable polygons,
// set a from collide mask to include bit 20
//
// For this example, we will make everything we want the ball to collide with
// include bit 0
m_wallsNp.node()->set_into_collide_mask(BitMask32::bit(0));
// CollisionNodes are usually invisible but can be shown. Uncomment the next
// line to see the collision walls
// m_wallsNp.show();
// We will now find the triggers for the holes and set their masks to 0 as
// well. We also set their names to make them easier to identify during
// collisions
m_loseTriggers.reserve(NB_HOLES);
for(int i = 0; i < NB_HOLES; ++i)
{
ostringstream filename;
filename << "**/hole_collide" << i;
NodePath triggerNp = m_mazeNp.find(filename.str());
triggerNp.node()->set_into_collide_mask(BitMask32::bit(0));
triggerNp.node()->set_name("loseTrigger");
m_loseTriggers.push_back(triggerNp);
// Uncomment this line to see the triggers
// triggerNp.show();
}
// Ground_collide is a single polygon on the same plane as the ground in the
// maze. We will use a ray to collide with it so that we will know exactly
// what height to put the ball at every frame. Since this is not something
// that we want the ball itself to collide with, it has a different
// bitmask.
m_mazeGroundNp = m_mazeNp.find("**/ground_collide");
m_mazeGroundNp.node()->set_into_collide_mask(BitMask32::bit(1));
// Load the ball and attach it to the scene
// It is on a root dummy node so that we can rotate the ball itself without
// rotating the ray that will be attached to it
m_ballRootNp = renderNp.attach_new_node("ballRoot");
m_ballNp = m_windowFrameworkPtr->load_model(modelsNp, "../models/ball");
m_ballNp.reparent_to(m_ballRootNp);
// Find the collision sphere for the ball which was created in the egg file
// Notice that it has a from collision mask of bit 0, and an into collision
// mask of no bits. This means that the ball can only cause collisions, not
// be collided into
m_ballSphereNp = m_ballNp.find("**/ball");
DCAST(CollisionNode, m_ballSphereNp.node())->set_from_collide_mask(BitMask32::bit(0));
m_ballSphereNp.node()->set_into_collide_mask(BitMask32::all_off());
// No we create a ray to start above the ball and cast down. This is to
// Determine the height the ball should be at and the angle the floor is
// tilting. We could have used the sphere around the ball itself, but it
// would not be as reliable
// Create the ray
m_ballGroundRayPtr = new CollisionRay();
if(m_ballGroundRayPtr != NULL)
{
// Set its origin
m_ballGroundRayPtr->set_origin(0,0,10);
// And its direction
m_ballGroundRayPtr->set_direction(0,0,-1);
// Collision solids go in CollisionNode
// Create and name the node
m_ballGroundColPtr = new CollisionNode("groundRay");
if(m_ballGroundColPtr != NULL)
{
// Add the ray
m_ballGroundColPtr->add_solid(m_ballGroundRayPtr);
// Set its bitmasks
m_ballGroundColPtr->set_from_collide_mask(BitMask32::bit(1));
m_ballGroundColPtr->set_into_collide_mask(BitMask32::all_off());
// Attach the node to the ballRoot so that the ray is relative to the ball
// (it will always be 10 feet over the ball and point down)
m_ballGroundColNp = m_ballRootNp.attach_new_node(m_ballGroundColPtr);
// Uncomment this line to see the ray
// m_ballGroundColNp.show();
}
}
// Finally, we create a CollisionTraverser. CollisionTraversers are what
// do the job of calculating collisions
// Note: no need to in this implementation
// Collision traversers tell collision handlers about collisions, and then
// the handler decides what to do with the information. We are using a
// CollisionHandlerQueue, which simply creates a list of all of the
// collisions in a given pass. There are more sophisticated handlers like
// one that sends events and another that tries to keep collided objects
// apart, but the results are often better with a simple queue
m_cHandlerPtr = new CollisionHandlerQueue();
if(m_cHandlerPtr != NULL)
{
// Now we add the collision nodes that can create a collision to the
// traverser. The traverser will compare these to all others nodes in the
// scene. There is a limit of 32 CollisionNodes per traverser
// We add the collider, and the handler to use as a pair
m_cTrav.add_collider(m_ballSphereNp, m_cHandlerPtr);
m_cTrav.add_collider(m_ballGroundColNp, m_cHandlerPtr);
}
// Collision traversers have a built in tool to help visualize collisions.
// Uncomment the next line to see it.
// m_cTrav.show_collisions(renderNp);
// This section deals with lighting for the ball. Only the ball was lit
// because the maze has static lighting pregenerated by the modeler
PT(AmbientLight) ambientLightPtr = new AmbientLight("ambientLight");
if(ambientLightPtr != NULL)
{
ambientLightPtr->set_color(Colorf(0.55, 0.55, 0.55, 1));
m_ballRootNp.set_light(renderNp.attach_new_node(ambientLightPtr));
}
PT(DirectionalLight) directionalLightPtr = new DirectionalLight("directionalLight");
if(directionalLightPtr != NULL)
{
directionalLightPtr->set_direction(LVecBase3f(0, 0, -1));
directionalLightPtr->set_color(Colorf(0.375, 0.375, 0.375, 1));
directionalLightPtr->set_specular_color(Colorf(1, 1, 1, 1));
m_ballRootNp.set_light(renderNp.attach_new_node(directionalLightPtr));
}
// This section deals with adding a specular highlight to the ball to make
// it look shiny
PT(Material) materialPtr = new Material();
if(materialPtr != NULL)
{
materialPtr->set_specular(Colorf(1,1,1,1));
materialPtr->set_shininess(96);
m_ballNp.set_material(materialPtr, 1);
}
// Finally, we call start for more initialization
start();
}
void World5::rotate_planets()
{
// rotatePlanets creates intervals to actually use the hierarchy we created
// to turn the sun, planets, and moon to give a rough representation of the
// solar system. The next lesson will go into more depth on intervals.
m_dayPeriodSun = new CLerpNodePathInterval("dayPeriodSunInterval",
20,
CLerpInterval::BT_no_blend,
true,
false,
m_sun,
NodePath());
m_dayPeriodSun->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodSun->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodMercury =
new CLerpNodePathInterval("orbitPeriodMercuryInterval",
0.241 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootMercury,
NodePath());
m_orbitPeriodMercury->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodMercury->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodMercury = new CLerpNodePathInterval("dayPeriodMercuryInterval",
59 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_mercury,
NodePath());
m_dayPeriodMercury->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodMercury->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodVenus = new CLerpNodePathInterval("orbitPeriodVenusInterval",
0.615 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootVenus,
NodePath());
m_orbitPeriodVenus->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodVenus->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodVenus = new CLerpNodePathInterval("dayPeriodVenusInterval",
243 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_venus,
NodePath());
m_dayPeriodVenus->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodVenus->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodEarth = new CLerpNodePathInterval("orbitPeriodEarthInterval",
m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootEarth,
NodePath());
m_orbitPeriodEarth->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodEarth->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodEarth = new CLerpNodePathInterval("dayPeriodEarthInterval",
m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_earth,
NodePath());
m_dayPeriodEarth->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodEarth->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodMoon = new CLerpNodePathInterval("orbitPeriodMoonInterval",
0.0749 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootMoon,
NodePath());
m_orbitPeriodMoon->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodMoon->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodMoon = new CLerpNodePathInterval("dayPeriodMoonInterval",
0.0749 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_moon,
NodePath());
m_dayPeriodMoon->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodMoon->set_end_hpr (LVecBase3f(360, 0, 0));
m_orbitPeriodMars = new CLerpNodePathInterval("orbitPeriodMarsInterval",
1.881 * m_yearscale,
CLerpInterval::BT_no_blend,
true,
false,
m_orbitRootMars,
NodePath());
m_orbitPeriodMars->set_start_hpr(LVecBase3f( 0, 0, 0));
m_orbitPeriodMars->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodMars = new CLerpNodePathInterval("dayPeriodMarsInterval",
1.03 * m_dayscale,
CLerpInterval::BT_no_blend,
true,
false,
m_mars,
NodePath());
m_dayPeriodMars->set_start_hpr(LVecBase3f( 0, 0, 0));
m_dayPeriodMars->set_end_hpr (LVecBase3f(360, 0, 0));
m_dayPeriodSun->loop();
m_orbitPeriodMercury->loop();
m_dayPeriodMercury->output(nout);
m_dayPeriodMercury->loop();
m_orbitPeriodVenus->loop();
m_dayPeriodVenus->loop();
m_orbitPeriodEarth->loop();
m_dayPeriodEarth->loop();
m_orbitPeriodMoon->loop();
m_dayPeriodMoon->loop();
m_orbitPeriodMars->loop();
m_dayPeriodMars->loop();
// Note: setup a task to step the interval manager
AsyncTaskManager::get_global_ptr()->add(
new GenericAsyncTask("intervalManagerTask", step_interval_manager, this));
}
