uint8_t LoRaMacLinkCheckReq( void )
{
MlmeReq_t mlmeRequest;
uint8_t status;
mlmeRequest.Type = MLME_LINK_CHECK;
switch( LoRaMacMlmeRequest( &mlmeRequest ) )
{
case LORAMAC_STATUS_OK:
{
status = 0;
break;
}
case LORAMAC_STATUS_SERVICE_UNKNOWN:
{
status = 1;
break;
}
default:
{
status = 1;
break;
}
}
return status;
}
void semtech_loramac_request_link_check(semtech_loramac_t *mac)
{
mutex_lock(&mac->lock);
mac->link_chk.available = false;
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_LINK_CHECK;
LoRaMacMlmeRequest(&mlmeReq);
mutex_unlock(&mac->lock);
}
static void _join_otaa(semtech_loramac_t *mac)
{
DEBUG("[semtech-loramac] starting OTAA join\n");
uint8_t dr = semtech_loramac_get_dr(mac);
mutex_lock(&mac->lock);
MibRequestConfirm_t mibReq;
mibReq.Type = MIB_NETWORK_JOINED;
mibReq.Param.IsNetworkJoined = false;
LoRaMacMibSetRequestConfirm(&mibReq);
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_JOIN;
mlmeReq.Req.Join.DevEui = mac->deveui;
mlmeReq.Req.Join.AppEui = mac->appeui;
mlmeReq.Req.Join.AppKey = mac->appkey;
mlmeReq.Req.Join.Datarate = dr;
mutex_unlock(&mac->lock);
uint8_t ret = LoRaMacMlmeRequest(&mlmeReq);
switch(ret) {
case LORAMAC_STATUS_OK:
/* Let the MAC do his job */
return;
case LORAMAC_STATUS_DUTYCYCLE_RESTRICTED:
{
DEBUG("[semtech-loramac] join otaa: duty cycle restricted\n");
/* Cannot join. */
msg_t msg;
msg.type = MSG_TYPE_LORAMAC_JOIN;
msg.content.value = SEMTECH_LORAMAC_DUTYCYCLE_RESTRICTED;
msg_send(&msg, semtech_loramac_pid);
return;
}
case LORAMAC_STATUS_BUSY:
{
DEBUG("[semtech-loramac] join otaa: mac is busy\n");
/* Cannot join. */
msg_t msg;
msg.type = MSG_TYPE_LORAMAC_JOIN;
msg.content.value = SEMTECH_LORAMAC_BUSY;
msg_send(&msg, semtech_loramac_pid);
return;
}
default:
{
DEBUG("[semtech-loramac] join otaa: failed with status %d\n", ret);
/* Cannot join. */
msg_t msg;
msg.type = MSG_TYPE_LORAMAC_JOIN;
msg.content.value = SEMTECH_LORAMAC_JOIN_FAILED;
msg_send(&msg, semtech_loramac_pid);
return;
}
}
}
uint8_t LoRaMacJoinReq( uint8_t *devEui, uint8_t *appEui, uint8_t *appKey )
{
MlmeReq_t mlmeRequest;
uint8_t status;
mlmeRequest.Type = MLME_JOIN;
mlmeRequest.Req.Join.AppEui = appEui;
mlmeRequest.Req.Join.AppKey = appKey;
mlmeRequest.Req.Join.DevEui = devEui;
switch( LoRaMacMlmeRequest( &mlmeRequest ) )
{
case LORAMAC_STATUS_OK:
{
status = 0;
break;
}
case LORAMAC_STATUS_BUSY:
{
status = 1;
break;
}
case LORAMAC_STATUS_NO_NETWORK_JOINED:
{
status = 2;
break;
}
case LORAMAC_STATUS_LENGTH_ERROR:
case LORAMAC_STATUS_MAC_CMD_LENGTH_ERROR:
{
status = 3;
break;
}
case LORAMAC_STATUS_SERVICE_UNKNOWN:
{
status = 4;
break;
}
case LORAMAC_STATUS_DEVICE_OFF:
{
status = 6;
break;
}
default:
{
status = 1;
break;
}
}
return status;
}
/*!
* \brief MLME-Confirm event function
*
* \param [IN] mlmeConfirm - Pointer to the confirm structure,
* containing confirm attributes.
*/
static void MlmeConfirm( MlmeConfirm_t *mlmeConfirm )
{
switch( mlmeConfirm->MlmeRequest )
{
case MLME_JOIN:
{
if( mlmeConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK )
{
// Status is OK, node has joined the network
DeviceState = DEVICE_STATE_SEND;
}
else
{
// Join was not successful. Try to join again
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_JOIN;
mlmeReq.Req.Join.DevEui = DevEui;
mlmeReq.Req.Join.AppEui = AppEui;
mlmeReq.Req.Join.AppKey = AppKey;
mlmeReq.Req.Join.Datarate = LORAWAN_DEFAULT_DATARATE;
if( LoRaMacMlmeRequest( &mlmeReq ) == LORAMAC_STATUS_OK )
{
DeviceState = DEVICE_STATE_SLEEP;
}
else
{
DeviceState = DEVICE_STATE_CYCLE;
}
}
break;
}
case MLME_LINK_CHECK:
{
if( mlmeConfirm->Status == LORAMAC_EVENT_INFO_STATUS_OK )
{
// Check DemodMargin
// Check NbGateways
if( ComplianceTest.Running == true )
{
ComplianceTest.LinkCheck = true;
ComplianceTest.DemodMargin = mlmeConfirm->DemodMargin;
ComplianceTest.NbGateways = mlmeConfirm->NbGateways;
}
}
break;
}
default:
break;
}
NextTx = true;
}
/*!
* \brief Function executed on TxNextPacket Timeout event
*/
static void OnTxNextPacketTimerEvent( void )
{
MibRequestConfirm_t mibReq;
LoRaMacStatus_t status;
TimerStop( &TxNextPacketTimer );
mibReq.Type = MIB_NETWORK_JOINED;
status = LoRaMacMibGetRequestConfirm( &mibReq );
if( status == LORAMAC_STATUS_OK )
{
if( mibReq.Param.IsNetworkJoined == true )
{
DeviceState = DEVICE_STATE_SEND;
NextTx = true;
}
else
{
// Network not joined yet. Try to join again
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_JOIN;
mlmeReq.Req.Join.DevEui = DevEui;
mlmeReq.Req.Join.AppEui = AppEui;
mlmeReq.Req.Join.AppKey = AppKey;
mlmeReq.Req.Join.Datarate = LORAWAN_DEFAULT_DATARATE;
if( LoRaMacMlmeRequest( &mlmeReq ) == LORAMAC_STATUS_OK )
{
DeviceState = DEVICE_STATE_SLEEP;
}
else
{
DeviceState = DEVICE_STATE_CYCLE;
}
}
}
}
int main( void )
{
HAL_EnableDBGStopMode();
LowPowerConfiguration();
pc.baud(115200);
// print banner
pc.printf("\r\n============== DEBUG STARTED ==============\r\n");
/** User button triggers the ultrasonic sensor */
//PinDetect button(PC_13,PullUp);
//button.attach_asserted(&sensor, &UltraSonic::triggerSample); // callback routine to trigger usonic
//button.setSampleFrequency();
LoRaMacPrimitives_t LoRaMacPrimitives;
LoRaMacCallback_t LoRaMacCallbacks;
MibRequestConfirm_t mibReq;
//BoardInitMcu( );
//BoardInitPeriph( );
BoardInit( );
TimerInit( &mainLoopTimeout, onMainLoopTimeoutEvent );
DeviceState = DEVICE_STATE_INIT;
while( 1 )
{
wait(0.5);
// This is a kind of watchdog on the main loop, if the timer isn't cancelled in x seconds then loop will enter INIT state
TimerSetValue( &mainLoopTimeout, 3000000 );
TimerStart( &mainLoopTimeout );
switch( DeviceState )
{
case DEVICE_STATE_INIT:
{
pc.printf("DEVICE_STATE_INIT\r\n");
LoRaMacPrimitives.MacMcpsConfirm = McpsConfirm;
LoRaMacPrimitives.MacMcpsIndication = McpsIndication;
LoRaMacPrimitives.MacMlmeConfirm = MlmeConfirm;
LoRaMacCallbacks.GetBatteryLevel = BoardGetBatteryLevel;
LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks );
TimerInit( &TxNextPacketTimer, OnTxNextPacketTimerEvent );
TimerInit( &ultrasonicTimer, OnUltrasonicTimeout );
mibReq.Type = MIB_ADR;
mibReq.Param.AdrEnable = LORAWAN_ADR_ON;
LoRaMacMibSetRequestConfirm( &mibReq ); // MAC information base service to set attributes of LoRaMac layer
mibReq.Type = MIB_PUBLIC_NETWORK;
mibReq.Param.EnablePublicNetwork = LORAWAN_PUBLIC_NETWORK;
LoRaMacMibSetRequestConfirm( &mibReq );
sensor.distanceAvailable = false; // Ensure initialised to false after power up
DeviceState = DEVICE_STATE_JOIN;
break;
}
case DEVICE_STATE_JOIN:
{
pc.printf("DEVICE_STATE_JOIN\r\n");
#if( OVER_THE_AIR_ACTIVATION != 0 )
pc.printf("OTA\r\n");
MlmeReq_t mlmeReq;
// Initialize LoRaMac device unique ID
//BoardGetUniqueId( DevEui );
mlmeReq.Type = MLME_JOIN; // MAC management service types are MLME_JOIN or MLME_LINK_CHECK
mlmeReq.Req.Join.DevEui = DevEui;
mlmeReq.Req.Join.AppEui = AppEui;
mlmeReq.Req.Join.AppKey = AppKey;
if( NextTx == true )
{
LoRaMacMlmeRequest( &mlmeReq ); // Sends a join request
}
// Schedule next packet transmission
//TxDutyCycleTime = OVER_THE_AIR_ACTIVATION_DUTYCYCLE;
//DeviceState = DEVICE_STATE_CYCLE;
DeviceState = DEVICE_STATE_CYCLE;
#else
pc.printf("ABP\r\n");
// Choose a random device address if not already defined in Comissioning.h
if( DevAddr == 0 )
{
// Random seed initialization
// srand1( BoardGetRandomSeed( ) );
// Choose a random device address
DevAddr = randr( 0, 0x01FFFFFF );
}
mibReq.Type = MIB_NET_ID;
mibReq.Param.NetID = LORAWAN_NETWORK_ID;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_DEV_ADDR;
mibReq.Param.DevAddr = DevAddr;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_NWK_SKEY;
mibReq.Param.NwkSKey = NwkSKey;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_APP_SKEY;
mibReq.Param.AppSKey = AppSKey;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_NETWORK_JOINED;
mibReq.Param.IsNetworkJoined = true;
LoRaMacMibSetRequestConfirm( &mibReq );
DeviceState = DEVICE_STATE_SEND;
#endif
break;
}
case DEVICE_STATE_SEND:
{
pc.printf("DEVICE_STATE_SEND\r\n");
if( NextTx == true )
{
pc.printf("Sending\r\n");
PrepareTxFrame( AppPort );
NextTx = SendFrame( );
}
}
case DEVICE_STATE_CYCLE:
{
pc.printf("DEVICE_STATE_CYCLE\r\n");
pc.printf("SensorState = %d, distanceAvailable = ",SensorState);
if (sensor.distanceAvailable)
pc.printf("true\r\n");
else
pc.printf("false\r\n");
pc.printf("LoRaMacState = %d\r\n",GetMacStatus());
if ((SensorState == SENT) || (SensorState == INIT)) { /** Range and Temperature readings have been sent so we can sleep */
TimerStop( &TxNextPacketTimer );
// Wait for MAC state to become idle before deep sleeping
if (GetMacStatus() == 0) { // Ensure MAC state is idle before sleeping
pc.printf("DeepSleep ..zzz.\r\n");
TimerStop(&mainLoopTimeout); // cancel main loop guard timeout
WakeUp::set(DEEPSLEEP_SECONDS); // Set RTC alarm to wake up from deep sleep
LowPowerPrep();
deepsleep(); // Deep sleep until wake up alarm from RTC
LowPowerRestore();
SensorState = TRIGGERED;
/* Trigger ultrasonic sensor and start sensor read failure timer */
sensor.triggerSample(); // Get Ultrasonic reading
TimerSetValue( &ultrasonicTimer, 2000000 ); // 2s timeout
TimerStart( &ultrasonicTimer );
DeviceState = DEVICE_STATE_SLEEP; // Cycle in sleep until sensor readings ready
}
else { // Cycle around until MAC state is idle
DeviceState = DEVICE_STATE_CYCLE;
}
}
else {
// Error shouldn't get here
pc.printf("Error State!!\r\n");
//TimerSetValue( &TxNextPacketTimer, TxDutyCycleTime );
//TimerStart( &TxNextPacketTimer );
SensorState = INIT;
DeviceState = DEVICE_STATE_SLEEP;
}
break;
}
case DEVICE_STATE_SLEEP:
{
pc.printf("DEVICE_STATE_SLEEP\r\n");
// Loop until sensor ready
if ((SensorState == TRIGGERED) && (sensor.distanceAvailable)) {
pc.printf("Xmit Reading..!\r\n");
TimerStop( &ultrasonicTimer ); // stop the sensor failure timer
SensorState = SENDING;
TimerSetValue( &TxNextPacketTimer, 10 ); // Schedule immediate transmission
TimerStart( &TxNextPacketTimer );
}
break;
}
default:
{
DeviceState = DEVICE_STATE_INIT;
break;
}
}
}
}
/**
* Main application entry point.
*/
int main( void )
{
LoRaMacPrimitives_t LoRaMacPrimitives;
LoRaMacCallback_t LoRaMacCallbacks;
MibRequestConfirm_t mibReq;
BoardInitMcu( );
BoardInitPeriph( );
DeviceState = DEVICE_STATE_INIT;
while( 1 )
{
switch( DeviceState )
{
case DEVICE_STATE_INIT:
{
LoRaMacPrimitives.MacMcpsConfirm = McpsConfirm;
LoRaMacPrimitives.MacMcpsIndication = McpsIndication;
LoRaMacPrimitives.MacMlmeConfirm = MlmeConfirm;
LoRaMacPrimitives.MacMlmeIndication = MlmeIndication;
LoRaMacCallbacks.GetBatteryLevel = BoardGetBatteryLevel;
LoRaMacInitialization( &LoRaMacPrimitives, &LoRaMacCallbacks, ACTIVE_REGION );
TimerInit( &TxNextPacketTimer, OnTxNextPacketTimerEvent );
TimerInit( &Led1Timer, OnLed1TimerEvent );
TimerSetValue( &Led1Timer, 25 );
TimerInit( &Led2Timer, OnLed2TimerEvent );
TimerSetValue( &Led2Timer, 25 );
mibReq.Type = MIB_ADR;
mibReq.Param.AdrEnable = LORAWAN_ADR_ON;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_PUBLIC_NETWORK;
mibReq.Param.EnablePublicNetwork = LORAWAN_PUBLIC_NETWORK;
LoRaMacMibSetRequestConfirm( &mibReq );
#if defined( REGION_EU868 )
LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON );
#endif
mibReq.Type = MIB_DEVICE_CLASS;
mibReq.Param.Class = CLASS_C;
LoRaMacMibSetRequestConfirm( &mibReq );
DeviceState = DEVICE_STATE_JOIN;
break;
}
case DEVICE_STATE_JOIN:
{
#if( OVER_THE_AIR_ACTIVATION != 0 )
MlmeReq_t mlmeReq;
// Initialize LoRaMac device unique ID
BoardGetUniqueId( DevEui );
mlmeReq.Type = MLME_JOIN;
mlmeReq.Req.Join.DevEui = DevEui;
mlmeReq.Req.Join.AppEui = AppEui;
mlmeReq.Req.Join.AppKey = AppKey;
mlmeReq.Req.Join.Datarate = LORAWAN_DEFAULT_DATARATE;
if( LoRaMacMlmeRequest( &mlmeReq ) == LORAMAC_STATUS_OK )
{
DeviceState = DEVICE_STATE_SLEEP;
}
else
{
DeviceState = DEVICE_STATE_CYCLE;
}
#else
// Choose a random device address if not already defined in Commissioning.h
if( DevAddr == 0 )
{
// Random seed initialization
srand1( BoardGetRandomSeed( ) );
// Choose a random device address
DevAddr = randr( 0, 0x01FFFFFF );
}
mibReq.Type = MIB_NET_ID;
mibReq.Param.NetID = LORAWAN_NETWORK_ID;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_DEV_ADDR;
mibReq.Param.DevAddr = DevAddr;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_NWK_SKEY;
mibReq.Param.NwkSKey = NwkSKey;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_APP_SKEY;
mibReq.Param.AppSKey = AppSKey;
LoRaMacMibSetRequestConfirm( &mibReq );
mibReq.Type = MIB_NETWORK_JOINED;
mibReq.Param.IsNetworkJoined = true;
LoRaMacMibSetRequestConfirm( &mibReq );
DeviceState = DEVICE_STATE_SEND;
#endif
break;
}
case DEVICE_STATE_SEND:
{
if( NextTx == true )
{
PrepareTxFrame( AppPort );
NextTx = SendFrame( );
}
if( ComplianceTest.Running == true )
{
// Schedule next packet transmission
TxDutyCycleTime = 5000; // 5000 ms
}
else
{
// Schedule next packet transmission
TxDutyCycleTime = APP_TX_DUTYCYCLE + randr( -APP_TX_DUTYCYCLE_RND, APP_TX_DUTYCYCLE_RND );
}
DeviceState = DEVICE_STATE_CYCLE;
break;
}
case DEVICE_STATE_CYCLE:
{
DeviceState = DEVICE_STATE_SLEEP;
// Schedule next packet transmission
TimerSetValue( &TxNextPacketTimer, TxDutyCycleTime );
TimerStart( &TxNextPacketTimer );
break;
}
case DEVICE_STATE_SLEEP:
{
// Wake up through events
TimerLowPowerHandler( );
// Process Radio IRQ
Radio.IrqProcess( );
break;
}
default:
{
DeviceState = DEVICE_STATE_INIT;
break;
}
}
}
}
/*!
* \brief MCPS-Indication event function
*
* \param [IN] mcpsIndication - Pointer to the indication structure,
* containing indication attributes.
*/
static void McpsIndication( McpsIndication_t *mcpsIndication )
{
if( mcpsIndication->Status != LORAMAC_EVENT_INFO_STATUS_OK )
{
return;
}
switch( mcpsIndication->McpsIndication )
{
case MCPS_UNCONFIRMED:
{
break;
}
case MCPS_CONFIRMED:
{
break;
}
case MCPS_PROPRIETARY:
{
break;
}
case MCPS_MULTICAST:
{
break;
}
default:
break;
}
// Check Multicast
// Check Port
// Check Datarate
// Check FramePending
if( mcpsIndication->FramePending == true )
{
// The server signals that it has pending data to be sent.
// We schedule an uplink as soon as possible to flush the server.
OnTxNextPacketTimerEvent( );
}
// Check Buffer
// Check BufferSize
// Check Rssi
// Check Snr
// Check RxSlot
if( ComplianceTest.Running == true )
{
ComplianceTest.DownLinkCounter++;
}
if( mcpsIndication->RxData == true )
{
switch( mcpsIndication->Port )
{
case 1: // The application LED can be controlled on port 1 or 2
case 2:
if( mcpsIndication->BufferSize == 1 )
{
//AppLedStateOn = mcpsIndication->Buffer[0] & 0x01;
}
break;
case 224:
if( ComplianceTest.Running == false )
{
// Check compliance test enable command (i)
if( ( mcpsIndication->BufferSize == 4 ) &&
( mcpsIndication->Buffer[0] == 0x01 ) &&
( mcpsIndication->Buffer[1] == 0x01 ) &&
( mcpsIndication->Buffer[2] == 0x01 ) &&
( mcpsIndication->Buffer[3] == 0x01 ) )
{
IsTxConfirmed = false;
AppPort = 224;
AppDataSizeBackup = AppDataSize;
AppDataSize = 2;
ComplianceTest.DownLinkCounter = 0;
ComplianceTest.LinkCheck = false;
ComplianceTest.DemodMargin = 0;
ComplianceTest.NbGateways = 0;
ComplianceTest.Running = true;
ComplianceTest.State = 1;
MibRequestConfirm_t mibReq;
mibReq.Type = MIB_ADR;
mibReq.Param.AdrEnable = true;
LoRaMacMibSetRequestConfirm( &mibReq );
#if defined( REGION_EU868 )
LoRaMacTestSetDutyCycleOn( false );
#endif
}
}
else
{
ComplianceTest.State = mcpsIndication->Buffer[0];
switch( ComplianceTest.State )
{
case 0: // Check compliance test disable command (ii)
IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON;
AppPort = LORAWAN_APP_PORT;
AppDataSize = AppDataSizeBackup;
ComplianceTest.DownLinkCounter = 0;
ComplianceTest.Running = false;
MibRequestConfirm_t mibReq;
mibReq.Type = MIB_ADR;
mibReq.Param.AdrEnable = LORAWAN_ADR_ON;
LoRaMacMibSetRequestConfirm( &mibReq );
#if defined( REGION_EU868 )
LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON );
#endif
break;
case 1: // (iii, iv)
AppDataSize = 2;
break;
case 2: // Enable confirmed messages (v)
IsTxConfirmed = true;
ComplianceTest.State = 1;
break;
case 3: // Disable confirmed messages (vi)
IsTxConfirmed = false;
ComplianceTest.State = 1;
break;
case 4: // (vii)
AppDataSize = mcpsIndication->BufferSize;
AppData[0] = 4;
for( uint8_t i = 1; i < MIN( AppDataSize, LORAWAN_APP_DATA_MAX_SIZE ); i++ )
{
AppData[i] = mcpsIndication->Buffer[i] + 1;
}
break;
case 5: // (viii)
{
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_LINK_CHECK;
LoRaMacMlmeRequest( &mlmeReq );
}
break;
case 6: // (ix)
{
MlmeReq_t mlmeReq;
// Disable TestMode and revert back to normal operation
IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON;
AppPort = LORAWAN_APP_PORT;
AppDataSize = AppDataSizeBackup;
ComplianceTest.DownLinkCounter = 0;
ComplianceTest.Running = false;
MibRequestConfirm_t mibReq;
mibReq.Type = MIB_ADR;
mibReq.Param.AdrEnable = LORAWAN_ADR_ON;
LoRaMacMibSetRequestConfirm( &mibReq );
#if defined( REGION_EU868 )
LoRaMacTestSetDutyCycleOn( LORAWAN_DUTYCYCLE_ON );
#endif
mlmeReq.Type = MLME_JOIN;
mlmeReq.Req.Join.DevEui = DevEui;
mlmeReq.Req.Join.AppEui = AppEui;
mlmeReq.Req.Join.AppKey = AppKey;
mlmeReq.Req.Join.Datarate = LORAWAN_DEFAULT_DATARATE;
if( LoRaMacMlmeRequest( &mlmeReq ) == LORAMAC_STATUS_OK )
{
DeviceState = DEVICE_STATE_SLEEP;
}
else
{
DeviceState = DEVICE_STATE_CYCLE;
}
}
break;
case 7: // (x)
{
if( mcpsIndication->BufferSize == 3 )
{
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_TXCW;
mlmeReq.Req.TxCw.Timeout = ( uint16_t )( ( mcpsIndication->Buffer[1] << 8 ) | mcpsIndication->Buffer[2] );
LoRaMacMlmeRequest( &mlmeReq );
}
else if( mcpsIndication->BufferSize == 7 )
{
MlmeReq_t mlmeReq;
mlmeReq.Type = MLME_TXCW_1;
mlmeReq.Req.TxCw.Timeout = ( uint16_t )( ( mcpsIndication->Buffer[1] << 8 ) | mcpsIndication->Buffer[2] );
mlmeReq.Req.TxCw.Frequency = ( uint32_t )( ( mcpsIndication->Buffer[3] << 16 ) | ( mcpsIndication->Buffer[4] << 8 ) | mcpsIndication->Buffer[5] ) * 100;
mlmeReq.Req.TxCw.Power = mcpsIndication->Buffer[6];
LoRaMacMlmeRequest( &mlmeReq );
}
ComplianceTest.State = 1;
}
break;
default:
break;
}
}
break;
default:
break;
}
}
// Switch LED 2 ON for each received downlink
GpioWrite( &Led2, 1 );
TimerStart( &Led2Timer );
}
