NTSTATUS
LspWorkaroundCleanupLock(
PLANSCSI_SESSION LSS,
ULONG LockNo,
PLARGE_INTEGER TimeOut
){
NTSTATUS status;
LONG i;
LANSCSI_PDUDESC pduDesc;
BYTE pduResponse;
PLANSCSI_SESSION tempLSS;
LONG maxConn;
UCHAR bindingBuffer[(FIELD_OFFSET(TA_ADDRESS, Address) + TDI_ADDRESS_LENGTH_LPX)];
UCHAR targetBuffer[(FIELD_OFFSET(TA_ADDRESS, Address) + TDI_ADDRESS_LENGTH_LPX)];
PTA_ADDRESS BindingAddress = (PTA_ADDRESS)bindingBuffer;
PTA_ADDRESS TargetAddress = (PTA_ADDRESS)targetBuffer;
LSSLOGIN_INFO loginInfo;
LSPROTO_TYPE LSProto;
ULONG cleaned;
//
// Parameter check
//
// Perform clean-up only for NDAS 2.0 rev 0.
//
if((LSS->HWVersion == LANSCSIIDE_VERSION_2_0 &&
LSS->HWRevision == LANSCSIIDE_VER20_REV_1G_ORIGINAL)) {
// Get maximum connections excluding the current session/connection.
maxConn = LANSCSIIDE_MAX_CONNECTION_VER11 - 1;
} else {
return STATUS_SUCCESS;
}
tempLSS = ExAllocatePoolWithTag(
NonPagedPool,
maxConn * sizeof(LANSCSI_SESSION),
LSS_POOLTAG);
if(tempLSS == NULL)
return STATUS_INSUFFICIENT_RESOURCES;
RtlZeroMemory(tempLSS, maxConn * sizeof(LANSCSI_SESSION));
//
// Init variables
//
status = STATUS_SUCCESS;
RtlZeroMemory(&pduDesc, sizeof(LANSCSI_PDUDESC));
pduDesc.Param8[3] = (UCHAR)LockNo;
pduDesc.TimeOut = IF_NULL_TIMEOUT_THEN_DEFAULT(LSS, TimeOut);
LspGetAddresses(LSS, BindingAddress, TargetAddress);
cleaned = 0;
//
// Try to make connections to fill up connection pool of the NDAS device.
// So, we can clear invalid acquisition of the locks.
//
KDPrintM(DBG_LURN_ERROR,("Try to clean up lock\n"));
for (i=0 ; i < maxConn; i++) {
tempLSS[i].DefaultTimeOut.QuadPart = IF_NULL_TIMEOUT_THEN_DEFAULT(LSS, TimeOut)->QuadPart;
//
// Connect and log in with read-only access.
//
// connect
status = LspConnect(
&tempLSS[i],
BindingAddress,
TargetAddress,
NULL,
NULL,
NULL,
NULL
);
if(!NT_SUCCESS(status)) {
KDPrintM(DBG_LURN_ERROR, ("LspConnect(), Can't Connect to the LS node. STATUS:0x%08x\n", status));
break;
}
}
for (i=0; i < maxConn; i++) {
if(!LspIsConnected(&tempLSS[i])) {
continue;
}
KDPrintM(DBG_LURN_TRACE, ("Con#%u\n", i));
cleaned++;
// extract login information from the existing LSS.
LspBuildLoginInfo(LSS, &loginInfo);
status = LspLookupProtocol(loginInfo.HWType, loginInfo.HWVersion, &LSProto);
if(!NT_SUCCESS(status)) {
LspDisconnect(&tempLSS[i]);
KDPrintM(DBG_LURN_ERROR, ("Wrong hardware version.\n"));
continue;
}
// Log in with read-only access.
loginInfo.UserID &= 0x0000ffff;
status = LspLogin(
&tempLSS[i],
&loginInfo,
LSProto,
NULL,
FALSE
);
if(!NT_SUCCESS(status)) {
KDPrintM(DBG_LURN_ERROR, ("LspLogin() failed. STATUS:0x%08x\n", status));
LspDisconnect(&tempLSS[i]);
continue;
}
// Do need to acquire the lock to release.
// NDAS chip 2.0 original allow to release the lock
// regardless of the ownership if the connection number
// in the lock information of NDAS chip 2.0
// is same.
#if 0
//
// Acquire the lock on the NDAS device.
//
pduDesc.Command = VENDOR_OP_SET_MUTEX;
status = LspVendorRequest(
&tempLSS[i],
&pduDesc,
&pduResponse
);
if(pduResponse != LANSCSI_RESPONSE_SUCCESS) {
KDPrintM(DBG_LURN_ERROR, ("Acquiring lock #%u denied by NDAS device\n", LockNo));
}
if(!NT_SUCCESS(status)) {
LspDisconnect(&tempLSS[i]);
KDPrintM(DBG_LURN_ERROR, ("LspVendorRequest() failed. STATUS=%08lx\n", status));
continue;
}
#endif
//
// Release the lock on the NDAS device.
//
pduDesc.Command = VENDOR_OP_FREE_MUTEX;
status = LspVendorRequest(
&tempLSS[i],
&pduDesc,
&pduResponse
);
if(pduResponse != LANSCSI_RESPONSE_SUCCESS) {
KDPrintM(DBG_LURN_ERROR, ("Releasing lock #%u denied by NDAS device\n", LockNo));
}
if(!NT_SUCCESS(status)) {
LspDisconnect(&tempLSS[i]);
KDPrintM(DBG_LURN_ERROR, ("LspVendorRequest() failed. STATUS=%08lx\n", status));
continue;
}
//
// Log out and disconnect.
//
LspLogout(
&tempLSS[i],
NULL
);
LspDisconnect(
&tempLSS[i]
);
//
// Init PDU
//
pduDesc.Retransmits = 0;
pduDesc.PacketLoss = 0;
}
KDPrintM(DBG_LURN_INFO, ("Cleaned #%u\n", cleaned));
ExFreePool(tempLSS);
return status;
}
NTSTATUS
LspCleanupLock(
PLANSCSI_SESSION LSS,
UCHAR LockNo
){
NTSTATUS status;
LONG i;
LANSCSI_PDUDESC pduDesc;
BYTE pduResponse;
PLANSCSI_SESSION tempLSS;
LONG maxConn;
LARGE_INTEGER GenericTimeOut;
TA_LSTRANS_ADDRESS BindingAddress, TargetAddress;
LSSLOGIN_INFO loginInfo;
LSPROTO_TYPE LSProto;
ULONG cleaned;
//
// Parameter check
//
if(LSS->HWProtoVersion <= LSIDEPROTO_VERSION_1_0) {
return STATUS_NOT_SUPPORTED;
}
if(LSS->HWVersion >= 1) {
maxConn = LANSCSIIDE_MAX_CONNECTION_VER11 - 1;
} else {
return STATUS_NOT_SUPPORTED;
}
tempLSS = ExAllocatePoolWithTag(
NonPagedPool,
maxConn * sizeof(LANSCSI_SESSION),
LSS_POOLTAG);
RtlZeroMemory(tempLSS, maxConn * sizeof(LANSCSI_SESSION));
//
// Init variables
//
status = STATUS_SUCCESS;
RtlZeroMemory(&pduDesc, sizeof(LANSCSI_PDUDESC));
pduDesc.Param64 = ((UINT64)(LockNo & 0x3)) << 32; // Lock number: 32~33 bit.
LspGetAddresses(LSS, &BindingAddress, &TargetAddress);
GenericTimeOut.QuadPart = NANO100_PER_SEC * 5;
cleaned = 0;
//
// Try to make connections to fill up connection pool of the NDAS device.
// So, we can clear invalid acquisition of the locks.
//
KDPrintM(DBG_LURN_ERROR,("Try to clean up lock\n"));
for (i=0 ; i < maxConn; i++) {
//
// Connect and log in with read-only access.
//
// connect
LspSetTimeOut(&tempLSS[i], &GenericTimeOut);
status = LspConnect(
&tempLSS[i],
&BindingAddress,
&TargetAddress
);
if(!NT_SUCCESS(status)) {
KDPrintM(DBG_LURN_ERROR, ("LspConnect(), Can't Connect to the LS node. STATUS:0x%08x\n", status));
break;
}
}
for (i=0; i < maxConn; i++) {
if(!LspIsConnected(&tempLSS[i])) {
continue;
}
KDPrintM(DBG_LURN_TRACE, ("Con#%u\n", i));
cleaned++;
// extract login information from the existing LSS.
LspBuildLoginInfo(LSS, &loginInfo);
status = LspLookupProtocol(loginInfo.HWType, loginInfo.HWVersion, &LSProto);
if(!NT_SUCCESS(status)) {
LspDisconnect(&tempLSS[i]);
KDPrintM(DBG_LURN_ERROR, ("Wrong hardware version.\n"));
continue;
}
// Log in with read-only access.
loginInfo.UserID &= 0x0000ffff;
status = LspLogin(
&tempLSS[i],
&loginInfo,
LSProto,
FALSE
);
if(!NT_SUCCESS(status)) {
KDPrintM(DBG_LURN_ERROR, ("LspLogin() failed. STATUS:0x%08x\n", status));
LspDisconnect(&tempLSS[i]);
ASSERT(FALSE);
continue;
}
//
// Acquire the lock on the NDAS device.
//
pduDesc.Command = VENDOR_OP_SET_SEMA;
status = LspVendorRequest(
&tempLSS[i],
&pduDesc,
&pduResponse
);
if(pduResponse != LANSCSI_RESPONSE_SUCCESS) {
KDPrintM(DBG_LURN_ERROR, ("Acquiring lock #%u denied by NDAS device\n", LockNo));
}
if(!NT_SUCCESS(status)) {
LspDisconnect(&tempLSS[i]);
KDPrintM(DBG_LURN_ERROR, ("LspVendorRequest() failed. STATUS=%08lx\n", status));
continue;
}
//
// Release the lock on the NDAS device.
//
pduDesc.Command = VENDOR_OP_FREE_SEMA;
status = LspVendorRequest(
&tempLSS[i],
&pduDesc,
&pduResponse
);
if(pduResponse != LANSCSI_RESPONSE_SUCCESS) {
KDPrintM(DBG_LURN_ERROR, ("Releasing lock #%u denied by NDAS device\n", LockNo));
}
if(!NT_SUCCESS(status)) {
LspDisconnect(&tempLSS[i]);
KDPrintM(DBG_LURN_ERROR, ("LspVendorRequest() failed. STATUS=%08lx\n", status));
continue;
}
//
// Log out and disconnect.
//
LspLogout(
&tempLSS[i]
);
LspDisconnect(
&tempLSS[i]
);
}
KDPrintM(DBG_LURN_INFO, ("Cleaned #%u\n", cleaned));
ExFreePool(tempLSS);
return status;
}
