Exemplos de MAKE_FAN_PATH_ON_PSU em C++ (Cpp)

Exemplo n.º 1

Arquivo: fani.c Projeto: carlroth/OpenNetworkLinux

static fan_path_T fan_path[] =  /* must map with onlp_fan_id */
{
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_RESERVED),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_1_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_2_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_3_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_4_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_5_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_6_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_7_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_8_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_9_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_10_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_11_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_12_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_PSU(1 ,1),
    MAKE_FAN_PATH_ON_PSU(2, 1)
};

/* Static fan information */
onlp_fan_info_t finfo[] = {
    { }, /* Not used */
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(1),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(2),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(3),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(4),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(5),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(6),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(7),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(8),
    MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(9),

Exemplo n.º 2

Arquivo: fani.c Projeto: carlroth/OpenNetworkLinux

#define MAKE_FAN_PATH_ON_MAIN_BOARD(prj,id) _MAKE_FAN_PATH_ON_MAIN_BOARD(prj,id)

#define MAKE_FAN_PATH_ON_PSU(folder) \
    {"", #folder"/psu_fan1_fault",  #folder"/psu_fan1_speed_rpm", \
     "", #folder"/psu_fan1_duty_cycle_percentage", ""  }

static fan_path_T fan_path[] =  /* must map with onlp_fan_id */
{
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_RESERVED),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_1_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_2_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_3_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_4_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_5_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_PSU(3-0058),
    MAKE_FAN_PATH_ON_PSU(4-005b)
};

#define MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(id) \
    { \
        { ONLP_FAN_ID_CREATE(FAN_##id##_ON_MAIN_BOARD), "Chassis Fan "#id, 0 }, \
        0x0, \
        (ONLP_FAN_CAPS_SET_PERCENTAGE | ONLP_FAN_CAPS_GET_RPM | ONLP_FAN_CAPS_GET_PERCENTAGE), \
        0, \
        0, \
        ONLP_FAN_MODE_INVALID, \
    }

#define MAKE_FAN_INFO_NODE_ON_PSU(psu_id, fan_id) \
    { \

Exemplo n.º 3

Arquivo: fani.c Projeto: cglewis/OpenNetworkLinux

#define MAKE_FAN_PATH_ON_MAIN_BOARD(prj,id) _MAKE_FAN_PATH_ON_MAIN_BOARD(prj,id)

#define MAKE_FAN_PATH_ON_PSU(folder) \
    {#folder"/psu_fan1_fault",  #folder"/psu_fan1_speed_rpm", \
     #folder"/psu_fan1_duty_cycle_percentage", ""  }

static fan_path_T fan_path[] =  /* must map with onlp_fan_id */
{
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_RESERVED),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_1_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_2_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_3_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_4_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_5_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_MAIN_BOARD(PROJECT_NAME, FAN_6_ON_MAIN_BOARD),
    MAKE_FAN_PATH_ON_PSU(11-005b),
    MAKE_FAN_PATH_ON_PSU(10-0058)
};

#define MAKE_FAN_INFO_NODE_ON_MAIN_BOARD(id) \
    { \
        { ONLP_FAN_ID_CREATE(FAN_##id##_ON_MAIN_BOARD), "Chassis Fan "#id, 0 }, \
        0x0, \
        (ONLP_FAN_CAPS_SET_PERCENTAGE | ONLP_FAN_CAPS_GET_RPM | ONLP_FAN_CAPS_GET_PERCENTAGE), \
        0, \
        0, \
        ONLP_FAN_MODE_INVALID, \
    }

#define MAKE_FAN_INFO_NODE_ON_PSU(psu_id, fan_id) \
    { \