void SimpleReactor::BuildDataFields()
{
DD.Text("");
DD.Text("Requirements...");
m_RB.OnOffCheckBox();
DD.String("Desc", "Description", idDX_Description, MF_PARAMETER);
DD.Text("");
DD.Text("Results...");
DD.Double("FeedT", "", &m_dFeedT, MF_RESULT, MC_T("C"));
DD.Double("ProdT", "", idDX_ProdT, MF_RESULT, MC_T("C"));
DD.Double("TempDiff", "", idDX_TempDiff, MF_RESULT|MF_NO_FILING, MC_dT("C"));
if (m_RB.Enabled())
{
DD.Page("RB", false); //when reaction is on, always force this on to a new "RB" tab page
}
DD.Text("");
DD.Button("DoSomething", "", idDX_DoSomething);
m_RB.BuildDataFields();
}
void CPrecipitator::BuildDataFields()
{
static MDDValueLst DDB1[]={
{GRM_AAEq, "A - Aeq" },
{GRM_sigma, "sigma"},
{0}};
static MDDValueLst DDB2[]={
{0, "Mass" },
{1, "Fraction"},
{2, "Number"},
{0}};
static MDDValueLst DDB3[]={
{THL_None, "None" },
{THL_TempDrop, "TempDrop"},
{THL_FixedHeatFlow, "FixedLoss"},
{THL_Ambient, "Ambient"},
{THL_FixedTemp, "FixedTemp"},
{0}};
static MDDValueLst DDB5[]={
{ COOL_dQ, "Fixed.dQ"},
{ COOL_dT, "Fixed.dT" },
{ COOL_Hx, "HeatExchange"},
{0}};
static MDDValueLst DDB6[]={
{ EVAP_NONE, "None"},
{ EVAP_FIXED, "Fixed"},
{ EVAP_dT, "Ambient" },
{0}};
static MDDValueLst DDB7[]={
{ COOL_NONE, "None"},
{ COOL_INTERNAL, "Internal"},
{ COOL_EXTERNAL, "External" },
{0}};
static MDDValueLst DDB8[] = {
{0, "Quasi Timestep" },
{1, "Direct"},
{0}};
static MDDValueLst DDB13[]={
{0, "A/C - A/Ceq" },
{1, "Growth Rate"},
{0}};
static MDDValueLst DDB14[]={
{0, "Growth" },
{1, "Aggl (N/s/m^3)"},
{2, "deltaN"},
{3, "oldN"},
{4, "newN"},
{0}};
static MDDValueLst DDB15[]={
{CM_Molerus, "Molerus" },
{CM_Lynch, "Lynch"},
{CM_Plitt, "Plitt"},
{0}};
DD.Text ("");
#ifdef TTDEBUG
DD.CheckBox("TTDBG", "", &bTTDebug, MF_PARAMETER);
#endif
DD.CheckBox("On", "", &bOnLine, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.CheckBox("Use.Saved.Tank", "", &bTest, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.CheckBox("Verbose", "", &bVerbose, MF_PARAMETER|MF_SET_ON_CHANGE|MF_INIT_HIDDEN);
DD.Text("");
DD.CheckBox("Growth.On", "", &bGrowthOn, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.CheckBox("Agglom.On", "", &bAgglomOn, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.CheckBox("Nucleation.On", "", &bNuclOn, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.CheckBox("Classif.On", "", &bClassOn, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.Text("");
DD.Text ("Requirements");
DD.Double("TankVol", "", &dTankVol ,MF_PARAMETER, MC_Vol("m^3"));
DD.Double("UFValve", "", &m_dUFrac ,MF_PARAMETER, MC_Frac("%"));
DD.Double("ShortCircuit", "", &m_dShort_Circ ,MF_PARAMETER, MC_Frac("%"));
DD.Long ("ThermalLossMethod", "",&iThermalLossMethod, MF_PARAMETER|MF_SET_ON_CHANGE, DDB3);
DD.Show(iThermalLossMethod==THL_TempDrop);
DD.Double("Temp_Drop", "", &dTempDropRqd ,MF_PARAMETER, MC_dT("C"));
DD.Show(iThermalLossMethod==THL_FixedTemp);
DD.Double("FixedTemp", "", &dFixedTempRqd ,MF_PARAMETER, MC_T("C"));
DD.Show(iThermalLossMethod==THL_FixedHeatFlow);
DD.Double("ThermalLossRqd", "", &dThermalLossRqd ,MF_PARAMETER, MC_Pwr("kW"));
DD.Show(iThermalLossMethod==THL_Ambient);
DD.Double("ThermalLossAmbient", "", &dThermalLossAmbient ,MF_PARAMETER, MC_UA);
DD.Show();
DD.Long ("Evaporation", "", &iEvapMethod , MF_PARAMETER|MF_SET_ON_CHANGE, DDB6);
DD.Show(iEvapMethod!=EVAP_NONE);
DD.Double("Evap.Rate", "", &m_dEvapRate ,iEvapMethod==EVAP_FIXED?MF_PARAMETER:MF_RESULT, MC_Qm("kg/s"));
DD.Show(iEvapMethod==EVAP_dT);
DD.Double("Evap.Per.degK", "", &m_dEvapRateK ,MF_PARAMETER, MC_Qm("kg/s"));
DD.Show();
DD.Long ("Cooling", "", &iCoolType, MF_PARAMETER|MF_SET_ON_CHANGE, DDB7);
DD.Text("");
DD.Text ("");
DD.Text ("Results Tank");
DD.Double("ResidenceTime", "", &dResidenceTime ,MF_RESULT, MC_Time("h"));
DD.Double("SuperSat", "", &m_dSSat, MF_RESULT, MC_);
DD.Double("BrahmaSuperSat", "", &m_dBSSat, MF_RESULT, MC_);
DD.Double("SSA", "", &dSSA, MF_RESULT, MC_SurfAreaM);
DD.Double("Yield", "", &dYield ,MF_RESULT, MC_Conc("kg/m^3"));
DD.Double("THA.Precip", "", &dTHAPrecip ,MF_RESULT, MC_Qm("kg/s"));
DD.Double("AluminaPrecip", "", &dAlPrecip ,MF_RESULT, MC_Qm("kg/s"));
DD.Double("Solids.Precip", "", &dSolPrecip ,MF_RESULT, MC_Qm("kg/s"));
DD.Double("Solids.Conc", "", &dSolConc ,MF_RESULT, MC_Conc("kg/m^3"));
DD.Text ("Results");
DD.Show();
DD.Double("Vol_FlowIn", "", &dQvin ,MF_RESULT, MC_Qv("L/s"));
DD.Double("Vol_FlowOut", "", &dQvout ,MF_RESULT, MC_Qv("L/s"));
DD.Double("MassFlowIn", "", &dQmin ,MF_RESULT, MC_Qm("t/d"));
DD.Double("MassFlowOut", "", &dQmout ,MF_RESULT, MC_Qm("t/d"));
DD.Double("ACin", "", &dACin ,MF_RESULT, MC_);
DD.Double("ACout", "", &dACout ,MF_RESULT, MC_);
DD.Double("ACequil", "", &m_dACeq ,MF_RESULT, MC_);
DD.Double("TempIn", "", &dTin ,MF_RESULT, MC_T("C"));
DD.Double("TempOut", "", &dTout ,MF_RESULT, MC_T("C"));
DD.Double("GrowthRate", "", &m_dGrowth ,MF_RESULT, MC_Ldt("um/h"));
DD.Double("NuclRate", "", &m_dNucleation ,MF_RESULT, MC_);
DD.Double("NuclNum", "", &m_dNuclN ,MF_RESULT, MC_);
DD.Double("AgglNum", "", &m_dAgglomN ,MF_RESULT, MC_);
DD.Double("AgglMin", "", &agmin, MF_RESULT, MC_);
DD.Double("BoundSoda", "", &dSoda, MF_RESULT, MC_);
DD.Text("");
DD.Page("Precip");
DD.Double("ConvergenceLimit", "", &m_dConvergenceLimit, MF_PARAMETER|MF_INIT_HIDDEN, MC_);
DD.Double("Acceleration", "", &m_dAcc, MF_PARAMETER|MF_INIT_HIDDEN, MC_);
DD.Double("AggMinLimit", "", &dAggMinLim, MF_PARAMETER|MF_INIT_HIDDEN, MC_);
DD.Double("ThermalDamping", "", &m_dDamping, MF_PARAMETER|MF_INIT_HIDDEN, MC_Frac("%"));
DD.Double("MassDamping", "", &m_dMassDamping, MF_PARAMETER|MF_INIT_HIDDEN, MC_Frac("%"));
DD.Long("Iterations", "", &m_lIterations, MF_RESULT|MF_NO_FILING);
DD.Long("IterMax", "", &m_lItermax, MF_PARAMETER);
DD.Text("");
DD.Text("Plant Parameters");
DD.Long("MaxAgglClass", "", &m_lMaxAgglomClass, MF_PARAMETER);
DD.Double("NuclPlantCorr", "", &m_dNuclPlantCorr, MF_PARAMETER, MC_);
DD.Double("AgglomerisationConst", "", &m_dKAgglom, MF_PARAMETER, MC_);
DD.Double("SurfaceActivity", "", &m_dSurfaceAct, MF_PARAMETER, MC_);
DD.Double("SodaConst", "", &m_dSodaConst, MF_PARAMETER, MC_);
DD.Text("");
DD.Text("Linear Growth Rate Equation");
DD.Double("GrowthConst", "", &m_dK_G ,MF_PARAMETER, MC_);
DD.Double("GrowthActEnergy", "", &m_dActEGrowth ,MF_PARAMETER, MC_T("K"));
DD.Double("GrowthPwr", "", &m_dgamma_g ,MF_PARAMETER, MC_);
DD.Long ("GrowthTerm", "", &m_lGrowthTerm, MF_PARAMETER|MF_SET_ON_CHANGE, DDB1);
DD.Double("Sigma.Term", "", &m_dsigma ,MF_RESULT|MF_NO_FILING, MC_);
DD.Text("");
DD.Text("Nucleation Rate Equation");
DD.Long ("NucleationTerm", "", &m_lNuclTerm, MF_PARAMETER|MF_SET_ON_CHANGE, DDB1);
DD.Double("NucleationActEnergy", "", &m_dActENucleation ,MF_PARAMETER, MC_T("K"));
DD.Double("NucleationConst", "", &m_dK_N ,MF_PARAMETER, MC_);
DD.Double("NucleationPwr", "", &m_dgamma_N ,MF_PARAMETER, MC_);
DD.Text("");
DD.Text("Agglomeration Rate Equation");
DD.Double("SolidDenPwr", "", &m_dn_s ,MF_PARAMETER, MC_);
DD.Double("GrowthPwrAggl", "", &m_dgamma_2 ,MF_PARAMETER, MC_);
DD.Text("");
DD.Text("Soda Incorporation");
DD.Long ("SodaTerm", "", &m_lSodaTerm, MF_PARAMETER|MF_SET_ON_CHANGE, DDB13);
DD.Double("SodaPwr", "", &m_dgamma_s, MF_PARAMETER, MC_);
DD.Double("SodaActEnergy", "", &m_dActESoda ,MF_PARAMETER, MC_T("K"));
DD.Page("PSD");
DD.Double("Feed.N.Tot", "", &dFeedNTot, MF_RESULT, MC_);
DD.Double("Prod.N.Tot", "", &dProdNTot, MF_RESULT, MC_);
// Classification Stuff
DD.Show(bClassOn);
DD.Page("Classification");
DD.Long ("ClassMethod", "", &iClassMethod , MF_PARAMETER|MF_SET_ON_CHANGE, DDB15);
DD.Double("ExcessBypassUFlow", "", &m_dBypass ,MF_PARAMETER, MC_Frac("%"));
DD.Double("MeasureSharpness", "", &m_dSharp_Index ,MF_PARAMETER, MC_);
DD.Double("CutSize", "", &m_dCut_Size ,MF_PARAMETER, MC_);
DD.Double("LiquorToUFlow", "", &m_dSlurry_split ,MF_PARAMETER, MC_Frac("%"));
DD.Double("OverPassOFlow", "", &m_dOverpass ,MF_PARAMETER, MC_Frac("%"));
DD.Double("L_0", "", &m_dL0 ,MF_PARAMETER, MC_);
DD.Text("Results");
DD.Double("SolidsSplit", "", &m_dxS ,MF_RESULT, MC_Frac("%"));
DD.Double("Efficiency", "", &m_dEff ,MF_RESULT, MC_);
DD.Show(iCoolType!=0);
DD.Page("Cooler");
DD.Show(iCoolType==COOL_INTERNAL);
DD.CheckBox("Cooler.On", "", &m_bCoolerOn, MF_PARAMETER);
DD.Long ("Cooling.Type", "", (long*)&iCoolMethod, MF_PARAMETER|MF_SET_ON_CHANGE, DDB5);
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_dT));
DD.Double("dT", "", &m_dCooldT, MF_PARAMETER, MC_dT("C"));
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_dQ));
DD.Double("dQ", "", &m_dCooldQ, MF_PARAMETER, MC_Pwr("kW"));
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_Hx));
DD.Double("HX.Area", "", &m_dCoolArea, MF_PARAMETER, MC_Area("m^2"));
DD.Double("HX.HTC", "", &m_dCoolHTC, MF_PARAMETER, MC_HTC);
DD.Show(iCoolType==COOL_EXTERNAL || (iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_Hx)));
DD.CheckBox("By.Vol.Flow", "", &m_bByVolFlow, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_Hx));
DD.Double("Cooling.Flow", "", &m_dCoolFlow,
m_bByVolFlow ? MF_RESULT : MF_PARAMETER, MC_Qm("kg/s")); // Internal cooling flow
DD.Double("Int.Vol.Flow", "", &m_dIntCoolVolFlow,
m_bByVolFlow ? MF_PARAMETER : MF_RESULT, MC_Qv("m^3/s")); // By Volume
DD.Double("Hx.UA", "", &m_dUA, MF_RESULT, MC_UA);
DD.Double("Hx.LMTD", "", &m_dLMTD, MF_RESULT, MC_dT);
DD.Double("Water.Flow", "", &m_dCoolWaterFlow, MF_RESULT, MC_Qm("kg/s"));
DD.Double("Water.Vol.Flow", "", &m_dCoolWaterFlowVol, MF_RESULT, MC_Qv);
DD.Double("Water.Tin", "", &m_dCoolWaterTin, MF_RESULT, MC_T("C"));
DD.Double("Water.Tout", "", &m_dCoolWaterTout, MF_RESULT, MC_T("C"));
DD.Double("Liquor.Tin", "", &m_dLiquorTin, MF_RESULT, MC_T("C"));
DD.Double("Liquor.Tout", "", &m_dLiquorTout, MF_RESULT, MC_T("C"));
DD.Show(iCoolType==COOL_EXTERNAL);
DD.Double("Ext.Vol.Flow", "", &m_dExtCoolVolFlow,
m_bByVolFlow ? MF_PARAMETER : MF_RESULT, MC_Qv("m^3/s")); // Ext Cooling.Flow
DD.Double("Ext.Cooling.Flow", "", &m_dExtCoolFlow,
m_bByVolFlow ? MF_RESULT : MF_PARAMETER, MC_Qm("kg/s")); // Ext Cooling.Flow
DD.Double("Ext.Cooling.Temp", "", &m_dExtCoolTemp, MF_RESULT, MC_T("C")); // Ext Cooling.Temp
DD.Double("Ext.Cooling.totHz", "", &m_dCoolOutTotHz , MF_RESULT, MC_Pwr("kW")); // Ext Cooling Rate
DD.Show(iCoolType!=0);
DD.Double("Cooling.Rate", "", &m_dCoolRate, MF_RESULT, MC_Pwr("kW")); // Ext Cooling Rate
DD.Show();
DD.Page("Inlet");
DD.Long("PSD.Display", "", &iPSD, MF_PARAMETER|MF_SET_ON_CHANGE, DDB2);
const int NumSpecies = gs_MVDefn.Count();
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i << std::setw(12) << L[i] << " " << Lav[i] ;
DD.Double(os.str().c_str(), "", dd[2]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
/*******************
DD.Page("Size In");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[3]+i, MF_RESULT|MF_NO_FILING, MC_None);
}************************/
DD.Page("Size In");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[4]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
DD.Text("");
DD.Double("Number", "", dd[4]+26, MF_RESULT|MF_NO_FILING, MC_None);
DD.Double("Area", "", dd[4]+27, MF_RESULT|MF_NO_FILING, MC_None);
DD.Double("Vol", "", dd[4]+28, MF_RESULT|MF_NO_FILING, MC_None);
DD.Double("Mass", "", dd[4]+29, MF_RESULT|MF_NO_FILING, MC_None);
DD.Page("Size Tank");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[5]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
DD.Text("");
DD.Double("Number", "", dd[5]+26, MF_RESULT|MF_NO_FILING, MC_None);
DD.Double("Area", "", dd[5]+27, MF_RESULT|MF_NO_FILING, MC_None);
DD.Double("Vol", "", dd[5]+28, MF_RESULT|MF_NO_FILING, MC_None);
DD.Double("Mass", "", dd[5]+29, MF_RESULT|MF_NO_FILING, MC_None);
DD.Page("Numbers...");
// DD.Page(DDB14[iDType].m_pStr);
DD.Long("DType", "", &iDType, MF_PARAMETER|MF_SET_ON_CHANGE, DDB14);
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[6]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
DD.Object(SavedTank, MDD_RqdPage);
#ifdef TTDEBUG
DD.Page("Growth...");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[7]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
DD.Page("Aggl...");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[8]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
DD.Page("Nin...");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[9]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
DD.Page("Nout...");
for (int i=0; i<=nClasses; i++) {
std::stringstream os;
os << "Size " << std::setw(3) << i;
DD.Double(os.str().c_str(), "", dd[10]+i, MF_RESULT|MF_NO_FILING, MC_None);
}
#endif
}
void BatchPrecip::BuildDataFields()
{
static MDDValueLst DDHeatBalance[]=
{
{eHBal_Normal, "Normal"},
{eHBal_ImposedTemp, "Set End Temperature"},
// {eHBal_OptimumTemp, "Optimum Temperature"},
{0}
};
DD.Text ("");
DD.CheckBox ("On", "", &m_bOn, MF_PARAMETER);
//DD.Text ("");
//DD.Text ("Global options...");
//DD.Double ("AmbientTemp", &HyprodPrecipHelper::m_dAmbientTemp, MF_PARAMETER, MC_T("C") );
//DD.Double ("WindSpeed", &HyprodPrecipHelper::m_dWindSpeed, MF_PARAMETER, MC_Ldt);
//DD.CheckBox ("CompletePopulation", &Precipitator::sm_bCompletePopulation, MF_PARAMETER);
DD.Text ("Global options...");
DD.String("Version", "", idDX_Version, MF_RESULT);
DD.CheckBox ("CompletePopulation", "", &sm_bCompletePopulation, MF_PARAM_STOPPED);
DD.Show(!sm_bCompletePopulation);
DD.CheckBox ("UseSSA_from_PopRun", "", &sm_bUsePrevPSD, MF_PARAM_STOPPED);
DD.Show( (!sm_bUsePrevPSD)&&(!sm_bCompletePopulation) );
DD.Double("InTankSSA_of_solids", "", &m_dInTankSSA, MF_PARAMETER, MC_);
DD.Show();
DD.Text ("");
DD.Text ("Configuration");
DD.Double ("Volume", "", &m_dVolume, MF_PARAMETER, MC_Vol ("m^3"));
DD.Double ("KvFac", "", &m_dKvFac, MF_PARAMETER, MC_);
DD.Double ("Level", "", &m_dLevel, MF_PARAMETER, MC_Frac("%"));
static MDDValueLst DDModels[]=
{
{eAgMdl_dlev, "WellAgit"},
{eAgMdl_LowAgit, "LowAgit"},
{eAgMdl_HighAgit, "HighAgit"},
{eAgMdl_SizeInd, "SizeInd"},
{eAgMdl_EquiSize, "EquiSize"},
{eAgMdl_Groneweg, "Groneweg"},
{0}
};
static MDDValueLst NucleatModels[]=
{
{eNucl_Hyprod, "Original Hyprod Model"},
{eNucl_NBrown, "N.Brown batch model"},
{eNucl_LowShearRate, "Low shear model"},
{eNucl_HighShearRate, "High shear model"},
{eNucl_LowSolidsConc, "Low Solids model"},
{eNucl_Hybrid, "New Hybrid model"},
{0}
};
DD.Long("Agglom.Model", "", (long*)&m_eAgloModel, MF_PARAMETER|MF_SET_ON_CHANGE, DDModels);
DD.Show(m_eAgloModel==eAgMdl_dlev);
DD.Double("Param.WellAgit", "", &m_dAgloParam[eAgMdl_dlev], MF_PARAMETER);
DD.Show(m_eAgloModel==eAgMdl_LowAgit);
DD.Double("Param.LowAgit", "", &m_dAgloParam[eAgMdl_LowAgit], MF_PARAMETER);
DD.Show(m_eAgloModel==eAgMdl_HighAgit);
DD.Double("Param.HighAgit", "", &m_dAgloParam[eAgMdl_HighAgit], MF_PARAMETER);
DD.Show(m_eAgloModel==eAgMdl_SizeInd);
DD.Double("Param.SizeInd", "", &m_dAgloParam[eAgMdl_SizeInd], MF_PARAMETER);
DD.Show(m_eAgloModel==eAgMdl_EquiSize);
DD.Double("Param.EquiSize", "", &m_dAgloParam[eAgMdl_EquiSize], MF_PARAMETER);
DD.Show(m_eAgloModel==eAgMdl_Groneweg);
DD.Double("Param.Groneweg", "", &m_dAgloParam[eAgMdl_Groneweg], MF_PARAMETER);
DD.Show();
DD.Long("Nucleat.Model", "", (long*)&m_eNuclModel , MF_PARAMETER|MF_SET_ON_CHANGE, NucleatModels );
DD.Show(m_eNuclModel==eNucl_LowShearRate || m_eNuclModel==eNucl_HighShearRate || m_eNuclModel== eNucl_LowSolidsConc || m_eNuclModel==eNucl_Hybrid);
DD.Double("ShearRate", "", &m_eShearRate, MF_PARAMETER, MC_);
DD.Show();
DD.Text("");
DD.Long("ThermalBalance", "", (long*)&m_eHeatBalance, MF_PARAMETER|MF_SET_ON_CHANGE, DDHeatBalance);
DD.Show( m_eHeatBalance == eHBal_Normal );
DD.Double("Surface", "", &m_dSurface, MF_PARAMETER, MC_Area("m^2"));
DD.Double("UCoef", "", &m_dUCoef, MF_PARAMETER, MC_HTC("kcal/h.m^2.C"));
DD.Double("InTankCooling", "", &m_dInTankCooling, ((! m_eHeatBalance == eHBal_Normal) ? MF_RESULT : MF_PARAMETER),MC_Pwr("kcal/h"));
DD.Show(m_eHeatBalance == eHBal_ImposedTemp );
DD.Double("DrawOffTemperature", "", &m_dTempImpos, MF_PARAMETER|MF_NAN_OK ,MC_T("C"));
DD.Show();
DD.Text("");
DD.Text("Batch Control");
DD.CheckBox ("CirculationTimeSpecified", "", &m_bUseCircTime, MF_PARAMETER);
DD.Double("CirculationTime", "", &m_dCirculationTime, MF_PARAMETER ,MC_Time("h"));
DD.Double("FillingTime", "", &m_dFillingTime, MF_PARAMETER ,MC_Time("h"));
DD.Double("SeedingTime", "", &m_dSeedingTime, MF_PARAMETER ,MC_Time("h"));
DD.CheckBox ("AgglomerationWhileFilling", "", &m_bAgglomONwhileFilling, MF_PARAMETER);
DD.Double("DrawOffTime", "", &m_dDrawOffTime, MF_PARAMETER ,MC_Time("h"));
DD.Double("TanksInUse", "", &m_dNbTankAvailable, (m_dCirculationTime ? MF_PARAMETER : MF_RESULT), MC_);
DD.Double("SeededPerDay", "", &m_dNbSeededDay, (m_dCirculationTime ? MF_RESULT : MF_PARAMETER), MC_);
DD.Double("FillingTempDrop", "", &m_dFillingTempDrop, MF_PARAMETER, MC_dT("C"));
//DD.Double("SeedCharge", &m_dSeedCharge, MF_PARAMETER, MC_);
DD.Text("");
DD.Text("Results");
DD.Double("Loss2Ambient", "", &m_dLoss2Ambient, MF_RESULT, MC_Pwr("kcal/h"));
DD.Double("ResidenceTime", "", &m_dResTime, MF_RESULT, MC_Time("h"));
DD.Double("Yield", "", &m_dYield, MF_RESULT, MC_Conc("g/L"));
DD.Show(!sm_bCompletePopulation);
DD.CheckBox ("PrevPSDUsed", "", &m_bPrevPSDUsed, MF_RESULT);
DD.Show();
DD.Double("Ti", "", &m_dTempIn, MF_RESULT, MC_T("C"));
DD.Double("To", "", &m_dTempOut, MF_RESULT, MC_T("C"));
DD.Double("ACin", "", &m_dACIn, MF_RESULT, MC_);
DD.Double("ACout", "", &m_dACOut, MF_RESULT, MC_);
DD.Double("SolidConcIn", "", &m_dSolidConcIn, MF_RESULT, MC_Conc("g/L"));
DD.Double("SolidConcOut", "", &m_dSolidConcOut, MF_RESULT, MC_Conc("g/L"));
DD.Object(m_QProd, MDD_RqdPage);
}
void CPrecipitator::BuildDataFields()
{
static MDDValueLst DDB1[]={
{GRM_Fixed, "Fixed" },
{GRM_White, "White"},
{GRM_TTTest, "Test"},
{0}};
static MDDValueLst DDB3[]={
{THL_None, "None" },
{THL_TempDrop, "TempDrop"},
{THL_FixedHeatFlow, "FixedLoss"},
{THL_Ambient, "Ambient"},
{0}};
static MDDValueLst DDB5[]={
{ COOL_dQ, "Fixed.dQ"},
{ COOL_dT, "Fixed.dT" },
{ COOL_Hx, "HeatExchange"},
{0}};
static MDDValueLst DDB6[]={
{ EVAP_NONE, "None"},
{ EVAP_FIXED, "Fixed"},
{ EVAP_dT, "Ambient" },
{0}};
static MDDValueLst DDB7[]={
{ COOL_NONE, "None"},
{ COOL_INTERNAL, "Internal"},
{ COOL_EXTERNAL, "External" },
{0}};
DD.Text ("");
#ifdef TTDEBUG
DD.CheckBox("TTDBG", "", &bTTDebug, MF_PARAMETER);
#endif
DD.CheckBox("On", "", &bOnLine, MF_PARAMETER|MF_SET_ON_CHANGE);
// DD.CheckBox("Int.Cooling", "", &m_bInternalCool, MF_PARAMETER|MF_SET_ON_CHANGE);
//DD.CheckBox("Ext.Cooling", "", &m_bExternalCool, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.Long ("Cooling", "", &iCoolType, MF_PARAMETER|MF_SET_ON_CHANGE, DDB7);
m_RB.OnOffCheckBox();
DD.Long ("Evaporation", "", &iEvapMethod , MF_PARAMETER|MF_SET_ON_CHANGE, DDB6);
DD.Show(iEvapMethod!=EVAP_NONE);
DD.Double("Evap.Rate", "", &m_dEvapRate ,iEvapMethod==EVAP_FIXED?MF_PARAMETER:MF_RESULT, MC_Qm("kg/s"));
DD.Show(iEvapMethod==EVAP_dT);
DD.Double("Evap.Per.degK", "", &m_dEvapRateK ,MF_PARAMETER, MC_Qm("kg/s"));
DD.Show();
DD.Long ("ThermalLossMethod", "",&iThermalLossMethod, MF_PARAMETER|MF_SET_ON_CHANGE, DDB3);
DD.Show(iThermalLossMethod==THL_TempDrop);
DD.Double("Temp_Drop", "", &dTempDropRqd ,MF_PARAMETER, MC_dT("C"));
DD.Show(iThermalLossMethod==THL_FixedHeatFlow);
DD.Double("ThermalLossRqd", "", &dThermalLossRqd ,MF_PARAMETER, MC_Pwr("kW"));
DD.Show(iThermalLossMethod==THL_Ambient);
DD.Double("ThermalLossAmbient", "", &dThermalLossAmbient ,MF_PARAMETER, MC_UA);
DD.Show();
DD.Text("");
DD.Text ("Requirements");
DD.Double("TankVol", "", &dTankVol ,MF_PARAMETER, MC_Vol("m^3"));
DD.Text ("");
DD.Text ("Results Tank");
DD.Double("ResidenceTime", "", &dResidenceTime ,MF_RESULT, MC_Time("h"));
DD.Double("SuperSat", "", &m_dSSat, MF_RESULT, MC_);
DD.Double("Yield", "", &dYield ,MF_RESULT, MC_Conc("kg/m^3"));
DD.Double("THA.Precip", "", &dTHAPrecip ,MF_RESULT, MC_Qm("kg/s"));
DD.Double("Solids.Precip", "", &dSolPrecip ,MF_RESULT, MC_Qm("kg/s"));
DD.Double("Solids.Conc", "", &dSolConc ,MF_RESULT, MC_Conc("kg/m^3"));
DD.Text ("Results");
DD.Show();
DD.Double("Vol_FlowIn", "", &dQvin ,MF_RESULT, MC_Qv("L/s"));
DD.Double("Vol_FlowOut", "", &dQvout ,MF_RESULT, MC_Qv("L/s"));
DD.Double("MassFlowIn", "", &dQmin ,MF_RESULT, MC_Qm("t/d"));
DD.Double("MassFlowOut", "", &dQmout ,MF_RESULT, MC_Qm("t/d"));
DD.Double("ACin", "", &dACin ,MF_RESULT, MC_);
DD.Double("ACout", "", &dACout ,MF_RESULT, MC_);
DD.Double("ACequil", "", &m_dACeq ,MF_RESULT, MC_);
DD.Double("TempIn", "", &dTin ,MF_RESULT, MC_T("C"));
DD.Double("TempOut", "", &dTout ,MF_RESULT, MC_T("C"));
DD.Text("");
DD.Page("Precip");
DD.Long ("GrowthMethod", "", (long*)&iGrowthRateMethod, MF_PARAMETER|MF_SET_ON_CHANGE, DDB1);
DD.Double("Convergence.Limit", "", &m_dConvergenceLimit, MF_PARAMETER|MF_INIT_HIDDEN, MC_);
DD.Double("Thermal.Damping", "", &m_dDamping, MF_PARAMETER|MF_INIT_HIDDEN, MC_Frac("%"));
DD.Double("Mass.Damping", "", &m_dMassDamping, MF_PARAMETER|MF_INIT_HIDDEN, MC_Frac("%"));
DD.Double("Vol.Damping", "", &m_dVolDamping, MF_PARAMETER|MF_INIT_HIDDEN, MC_Frac("%"));
DD.Show (iGrowthRateMethod==GRM_Fixed);
DD.Double("Precip.Rate", "", &dGrowthRate ,MF_PARAMETER, MC_Qm("kg/s"));
DD.Show (iGrowthRateMethod==GRM_White);
DD.Double("ER_White", "", &ER_White ,MF_PARAMETER, MC_T("K"));
DD.Double("K_White", "", &K_White ,MF_PARAMETER, MC_);
DD.Double("gF_White", "", &gF_White ,MF_PARAMETER, MC_);
DD.Double("K_SODA", "", &m_dK_Soda, MF_PARAMETER, MC_);
DD.Double("E_SODA", "", &m_dE_Soda, MF_PARAMETER, MC_);
DD.Show (iGrowthRateMethod==GRM_TTTest);
DD.Double("ActivationEnergy", "", &m_dActivationEnergy ,MF_PARAMETER, MC_T("K"));
DD.Double("K0", "", &m_dK0 ,MF_PARAMETER, MC_);
DD.Double("K1", "", &m_dK1 ,MF_PARAMETER, MC_);
DD.Double("k_TOC", "", &m_dk_TOC ,MF_PARAMETER, MC_);
DD.Double("n_s", "", &m_dn_s ,MF_PARAMETER, MC_);
DD.Double("n_fc", "", &m_dn_fc ,MF_PARAMETER, MC_);
DD.Double("n_eq", "", &m_dn_eq ,MF_PARAMETER, MC_);
DD.Double("n_", "", &m_dn_ ,MF_PARAMETER, MC_);
DD.Double("n_sol", "", &m_dn_sol ,MF_PARAMETER, MC_);
DD.Double("n_ssa", "", &m_dn_ssa ,MF_PARAMETER, MC_);
DD.Double("SSAin", "", &m_dSSAin ,MF_RESULT, MC_SurfAreaM);
DD.Double("SSA", "", &m_dSSA ,MF_PARAMETER, MC_SurfAreaM);
DD.Show (iGrowthRateMethod!=0);
DD.Double("BoundSoda_OrgPart","", &m_dBndOrgSoda ,MF_PARAMETER, MC_Frac("%"));
DD.Show();
DD.Text("Thermal and Mass Balance");
DD.Double("Mass.Flow.In", "", &dQmin ,MF_RESULT|MF_NO_FILING, MC_Qm("t/d"));
DD.Double("Mass.Flow.Out", "", &dQmout ,MF_RESULT|MF_NO_FILING, MC_Qm("t/d"));
DD.Show(iEvapMethod!=0);
DD.Double("Evap.Mass.Loss", "", &m_dEvapRate, MF_RESULT, MC_Qm("kg/s"));
DD.Double("Evap.Thermal.Loss", "", &m_dEvapThermalLoss ,MF_RESULT, MC_Pwr("kW"));
DD.Show(iThermalLossMethod==THL_Ambient);
DD.Double("Env.Thermal.Loss", "", &m_dEnvironmentLoss, MF_RESULT, MC_Pwr("kW"));
DD.Show(iCoolType!=0);
DD.Double("Cooler.Thermal.Loss", "", &m_dCoolRate, MF_RESULT, MC_Pwr("kW")); // Ext Cooling Rate
DD.Double("ReactionHeat", "", &dReactionHeat ,MF_RESULT, MC_Pwr("kW"));
DD.Double("Total.Thermal.Loss", "", &m_dTotThermalLoss, MF_RESULT, MC_Pwr("kW"));
DD.Text("Stream.Enthalpy");
DD.Double("HzIn", "", &m_dHIn, MF_RESULT, MC_Pwr);
DD.Double("HzEvap", "", &m_dHEvap, MF_RESULT, MC_Pwr);
DD.Double("HzOut", "", &m_dHOut, MF_RESULT, MC_Pwr);
DD.Double("HzBal", "", &m_dHBal, MF_RESULT, MC_Pwr);
DD.Show(iCoolType!=0);
DD.Page("Cooler");
DD.Show(iCoolType==COOL_INTERNAL);
DD.CheckBox("Cooler.On", "", &m_bCoolerOn, MF_PARAMETER);
DD.Long ("Cooling.Type", "", (long*)&iCoolMethod, MF_PARAMETER|MF_SET_ON_CHANGE, DDB5);
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_dT));
DD.Double("dT", "", &m_dCooldT, MF_PARAMETER, MC_dT("C"));
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_dQ));
DD.Double("dQ", "", &m_dCooldQ, MF_PARAMETER, MC_Pwr("kW"));
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_Hx));
DD.Double("HX.Area", "", &m_dCoolArea, MF_PARAMETER, MC_Area("m^2"));
DD.Double("HX.HTC", "", &m_dCoolHTC, MF_PARAMETER, MC_HTC);
DD.Show(iCoolType==COOL_EXTERNAL || (iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_Hx)));
DD.CheckBox("By.Vol.Flow", "", &m_bByVolFlow, MF_PARAMETER|MF_SET_ON_CHANGE);
DD.Show(iCoolType==COOL_INTERNAL && (iCoolMethod==COOL_Hx));
DD.Double("Cooling.Flow", "", &m_dCoolFlow,
m_bByVolFlow ? MF_RESULT : MF_PARAMETER, MC_Qm("kg/s")); // Internal cooling flow
DD.Double("Int.Vol.Flow", "", &m_dIntCoolVolFlow,
m_bByVolFlow ? MF_PARAMETER : MF_RESULT, MC_Qv("m^3/s")); // By Volume
DD.Double("Hx.UA", "", &m_dUA, MF_RESULT, MC_UA);
DD.Double("Hx.LMTD", "", &m_dLMTD, MF_RESULT, MC_dT);
DD.Double("Water.Flow", "", &m_dCoolWaterFlow, MF_RESULT, MC_Qm("kg/s"));
DD.Double("Water.Vol.Flow", "", &m_dCoolWaterFlowVol, MF_RESULT, MC_Qv);
DD.Double("Water.Tin", "", &m_dCoolWaterTin, MF_RESULT, MC_T("C"));
DD.Double("Water.Tout", "", &m_dCoolWaterTout, MF_RESULT, MC_T("C"));
DD.Double("Liquor.Tin", "", &m_dLiquorTin, MF_RESULT, MC_T("C"));
DD.Double("Liquor.Tout", "", &m_dLiquorTout, MF_RESULT, MC_T("C"));
DD.Show(iCoolType==COOL_EXTERNAL);
DD.Double("Ext.Vol.Flow", "", &m_dExtCoolVolFlow,
m_bByVolFlow ? MF_PARAMETER : MF_RESULT, MC_Qv("m^3/s")); // Ext Cooling.Flow
DD.Double("Ext.Cooling.Flow", "", &m_dExtCoolFlow,
m_bByVolFlow ? MF_RESULT : MF_PARAMETER, MC_Qm("kg/s")); // Ext Cooling.Flow
DD.Double("Ext.Cooling.Temp", "", &m_dExtCoolTemp, MF_RESULT, MC_T("C")); // Ext Cooling.Temp
DD.Double("Ext.Cooling.totHz", "", &m_dCoolOutTotHz , MF_RESULT, MC_Pwr("kW")); // Ext Cooling Rate
DD.Show(iCoolType!=0);
DD.Double("Cooling.Rate", "", &m_dCoolRate, MF_RESULT, MC_Pwr("kW")); // Ext Cooling Rate
if (!m_bEvapConnected && iEvapMethod!=EVAP_NONE) //if optional Evap is NOT connected and evaporation functionality is required show the output stream
DD.Object(Evap, MDD_RqdPage);
DD.Show(m_RB.Enabled());
DD.Page("RB");
m_RB.BuildDataFields();
DD.Show();
}
