void menuModelSetup(uint8_t event)
{
horzpos_t l_posHorz = menuHorizontalPosition;
bool CURSOR_ON_CELL = (menuHorizontalPosition >= 0);
#if defined(TARANIS_INTERNAL_PPM)
MENU_TAB({ 0, 0, TIMERS_ROWS, TOPLCD_ROWS 0, 1, 0, 0, LABEL(Throttle), 0, 0, 0, LABEL(PreflightCheck), 0, 0, SW_WARN_ITEMS(), POT_WARN_ITEMS(),
NAVIGATION_LINE_BY_LINE|(NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1), 0,
LABEL(InternalModule),
INTERNAL_MODULE_MODE_ROWS,
INTERNAL_MODULE_CHANNELS_ROWS,
IF_INTERNAL_MODULE_ON(IS_MODULE_XJT(INTERNAL_MODULE) ? (HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[INTERNAL_MODULE].rfProtocol) ? (uint8_t)2 : (uint8_t)1) : (IS_MODULE_PPM(INTERNAL_MODULE) ? (uint8_t)1 : HIDDEN_ROW)),
IF_INTERNAL_MODULE_ON((IS_MODULE_XJT(INTERNAL_MODULE)) ? FAILSAFE_ROWS(INTERNAL_MODULE) : HIDDEN_ROW),
LABEL(ExternalModule),
(IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0,
EXTERNAL_MODULE_CHANNELS_ROWS,
(IS_MODULE_XJT(EXTERNAL_MODULE) && !HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[EXTERNAL_MODULE].rfProtocol)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW,
IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)),
LABEL(Trainer), 0, TRAINER_CHANNELS_ROWS(), IF_TRAINER_ON(2)});
#else
MENU_TAB({ 0, 0, TIMERS_ROWS, TOPLCD_ROWS 0, 1, 0, 0, LABEL(Throttle), 0, 0, 0, LABEL(PreflightCheck), 0, 0, SW_WARN_ITEMS(), POT_WARN_ITEMS(),
NAVIGATION_LINE_BY_LINE|(NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1), 0,
LABEL(InternalModule),
INTERNAL_MODULE_MODE_ROWS,
INTERNAL_MODULE_CHANNELS_ROWS,
IF_INTERNAL_MODULE_ON(HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[INTERNAL_MODULE].rfProtocol) ? (uint8_t)2 : (uint8_t)1),
IF_INTERNAL_MODULE_ON(FAILSAFE_ROWS(INTERNAL_MODULE)),
LABEL(ExternalModule),
EXTERNAL_MODULE_MODE_ROWS,
EXTERNAL_MODULE_CHANNELS_ROWS,
(IS_MODULE_XJT(EXTERNAL_MODULE) && !HAS_RF_PROTOCOL_MODELINDEX(g_model.moduleData[EXTERNAL_MODULE].rfProtocol)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW,
IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)),
LABEL(Trainer), 0, TRAINER_CHANNELS_ROWS(), IF_TRAINER_ON(2)});
#endif
MENU_CHECK(STR_MENUSETUP, menuTabModel, e_ModelSetup, ITEM_MODEL_SETUP_MAX);
#if (defined(DSM2) || defined(PXX))
if (menuEvent) {
moduleFlag[0] = 0;
moduleFlag[1] = 0;
}
#endif
int sub = menuVerticalPosition;
for (int i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+menuVerticalOffset;
for (int j=0; j<=k; j++) {
if (mstate_tab[j] == HIDDEN_ROW)
k++;
}
LcdFlags blink = ((s_editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
break;
case ITEM_MODEL_BITMAP:
lcd_putsLeft(y, STR_BITMAP);
if (ZEXIST(g_model.header.bitmap))
lcd_putsnAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.bitmap, sizeof(g_model.header.bitmap), attr);
else
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VCSWFUNC, 0, attr);
if (attr && event==EVT_KEY_BREAK(KEY_ENTER) && READ_ONLY_UNLOCKED()) {
s_editMode = 0;
if (listSdFiles(BITMAPS_PATH, BITMAPS_EXT, sizeof(g_model.header.bitmap), g_model.header.bitmap, LIST_NONE_SD_FILE)) {
popupMenuHandler = onModelSetupBitmapMenu;
}
else {
POPUP_WARNING(STR_NO_BITMAPS_ON_SD);
}
}
break;
case ITEM_MODEL_TIMER1:
editTimerMode(0, y, attr, event);
break;
case ITEM_MODEL_TIMER1_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[0].name, LEN_TIMER_NAME, event, attr);
break;
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
g_model.timers[0].minuteBeep = onoffMenuItem(g_model.timers[0].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
g_model.timers[0].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[0].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
break;
case ITEM_MODEL_TIMER1_PERSISTENT:
g_model.timers[0].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[0].persistent, 0, 2, attr, event);
break;
#if TIMERS > 1
case ITEM_MODEL_TIMER2:
editTimerMode(1, y, attr, event);
break;
case ITEM_MODEL_TIMER2_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[1].name, LEN_TIMER_NAME, event, attr);
break;
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
g_model.timers[1].minuteBeep = onoffMenuItem(g_model.timers[1].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
g_model.timers[1].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[1].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
break;
case ITEM_MODEL_TIMER2_PERSISTENT:
g_model.timers[1].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[1].persistent, 0, 2, attr, event);
break;
#endif
#if TIMERS > 2
case ITEM_MODEL_TIMER3:
editTimerMode(2, y, attr, event);
break;
case ITEM_MODEL_TIMER3_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, g_model.timers[2].name, LEN_TIMER_NAME, event, attr);
break;
case ITEM_MODEL_TIMER3_MINUTE_BEEP:
g_model.timers[2].minuteBeep = onoffMenuItem(g_model.timers[2].minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
g_model.timers[2].countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, g_model.timers[2].countdownBeep, COUNTDOWN_SILENT, COUNTDOWN_COUNT-1, attr, event);
break;
case ITEM_MODEL_TIMER3_PERSISTENT:
g_model.timers[2].persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, g_model.timers[2].persistent, 0, 2, attr, event);
break;
#endif
#if defined(REV9E)
case ITEM_MODEL_TOP_LCD_TIMER:
lcd_putsLeft(y, STR_TOPLCDTIMER);
putsStrIdx(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER, g_model.topLcdTimer+1, attr);
if (attr) {
g_model.topLcdTimer = checkIncDec(event, g_model.topLcdTimer, 0, TIMERS-1, EE_MODEL);
}
break;
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, menuHorizontalPosition<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, (menuHorizontalPosition>0 && !NO_HIGHLIGHT()) ? attr : 0);
if (attr && menuHorizontalPosition>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
START_NO_HIGHLIGHT();
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
break;
case ITEM_MODEL_DISPLAY_TRIMS:
g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
break;
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_LABEL:
lcd_putsLeft(y, STR_THROTTLE_LABEL);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcd_putsLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO_CHECK(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT, isThrottleSourceAvailable);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
case ITEM_MODEL_PREFLIGHT_LABEL:
lcd_putsLeft(y, STR_PREFLIGHT);
break;
case ITEM_MODEL_CHECKLIST_DISPLAY:
ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
break;
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
#if defined(REV9E)
case ITEM_MODEL_SWITCHES_WARNING2:
case ITEM_MODEL_SWITCHES_WARNING3:
case ITEM_MODEL_POTS_WARNING2:
if (i==0) {
if (CURSOR_MOVED_LEFT(event))
menuVerticalOffset--;
else
menuVerticalOffset++;
}
break;
#endif
case ITEM_MODEL_SWITCHES_WARNING:
{
#if defined(REV9E)
if (i>=NUM_BODY_LINES-2 && getSwitchWarningsCount() > 8*(NUM_BODY_LINES-i)) {
if (CURSOR_MOVED_LEFT(event))
menuVerticalOffset--;
else
menuVerticalOffset++;
break;
}
#endif
lcd_putsLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
break;
case EVT_KEY_LONG(KEY_ENTER):
if (menuHorizontalPosition < 0) {
START_NO_HIGHLIGHT();
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
int current = 0;
for (int i=0; i<NUM_SWITCHES; i++) {
if (SWITCH_WARNING_ALLOWED(i)) {
div_t qr = div(current, 8);
if (!READ_ONLY() && event==EVT_KEY_BREAK(KEY_ENTER) && line && l_posHorz==current) {
g_model.switchWarningEnable ^= (1 << i);
eeDirty(EE_MODEL);
}
uint8_t swactive = !(g_model.switchWarningEnable & (1<<i));
c = "\300-\301"[states & 0x03];
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+qr.rem*(2*FW+1), y+FH*qr.quot, 'A'+i, line && (menuHorizontalPosition==current) ? INVERS : 0);
if (swactive) lcd_putc(lcdNextPos, y+FH*qr.quot, c);
++current;
}
states >>= 2;
}
if (attr && menuHorizontalPosition < 0) {
#if defined(REV9E)
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, 8*(2*FW+1), 1+FH*((current+7)/8));
#else
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, current*(2*FW+1), FH+1);
#endif
}
break;
}
case ITEM_MODEL_POTS_WARNING:
#if defined(REV9E)
if (i==NUM_BODY_LINES-1 && g_model.potsWarnMode) {
if (CURSOR_MOVED_LEFT(event))
menuVerticalOffset--;
else
menuVerticalOffset++;
break;
}
#endif
lcd_putsLeft(y, STR_POTWARNING);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, PSTR("\004""OFF\0""Man\0""Auto"), g_model.potsWarnMode, (menuHorizontalPosition == 0) ? attr : 0);
if (attr && (menuHorizontalPosition == 0)) {
CHECK_INCDEC_MODELVAR(event, g_model.potsWarnMode, POTS_WARN_OFF, POTS_WARN_AUTO);
eeDirty(EE_MODEL);
}
if (attr) {
if (menuHorizontalPosition > 0) s_editMode = 0;
if (!READ_ONLY() && menuHorizontalPosition > 0) {
switch (event) {
case EVT_KEY_LONG(KEY_ENTER):
killEvents(event);
if (g_model.potsWarnMode == POTS_WARN_MANUAL) {
SAVE_POT_POSITION(menuHorizontalPosition-1);
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
break;
case EVT_KEY_BREAK(KEY_ENTER):
g_model.potsWarnEnabled ^= (1 << (menuHorizontalPosition-1));
eeDirty(EE_MODEL);
break;
}
}
}
if (g_model.potsWarnMode) {
coord_t x = MODEL_SETUP_2ND_COLUMN+28;
for (int i=0; i<NUM_POTS; ++i) {
if (i<NUM_XPOTS && !IS_POT_AVAILABLE(POT1+i)) {
if (attr && (menuHorizontalPosition==i+1)) REPEAT_LAST_CURSOR_MOVE();
}
else {
#if defined(REV9E)
if (i == NUM_XPOTS) {
y += FH;
x = MODEL_SETUP_2ND_COLUMN;
}
#endif
LcdFlags flags = ((menuHorizontalPosition==i+1) && attr) ? BLINK : 0;
if ((!attr || menuHorizontalPosition >= 0) && !(g_model.potsWarnEnabled & (1 << i))) {
flags |= INVERS;
}
// TODO add a new function
lcd_putsnAtt(x, y, STR_VSRCRAW+2+STR_VSRCRAW[0]*(NUM_STICKS+1+i), STR_VSRCRAW[0]-1, flags & ~ZCHAR);
x = lcdNextPos+3;
}
}
}
if (attr && menuHorizontalPosition < 0) {
#if defined(REV9E)
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-FH-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, 2*FH+1);
#else
drawFilledRect(MODEL_SETUP_2ND_COLUMN-1, y-1, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH+1, FH+1);
#endif
}
break;
case ITEM_MODEL_BEEP_CENTER:
{
lcd_putsLeft(y, STR_BEEPCTR);
coord_t x = MODEL_SETUP_2ND_COLUMN;
for (int i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
if (i>=POT1 && i<POT1+NUM_XPOTS && !IS_POT_AVAILABLE(i)) {
if (attr && menuHorizontalPosition == i) REPEAT_LAST_CURSOR_MOVE();
continue;
}
lcd_putsiAtt(x, y, STR_RETA123, i, ((menuHorizontalPosition==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
x += FW;
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER)) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<menuHorizontalPosition);
eeDirty(EE_MODEL);
}
}
}
break;
}
case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
break;
case ITEM_MODEL_INTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_INTERNALRF);
break;
#if defined(TARANIS_INTERNAL_PPM)
case ITEM_MODEL_INTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[INTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0);
if (IS_MODULE_XJT(INTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[INTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
g_model.moduleData[INTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-2, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[INTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[INTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[INTERNAL_MODULE].channelsCount = 0;
}
break;
case 1:
g_model.moduleData[INTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[INTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[INTERNAL_MODULE].channelsCount = 0;
}
}
}
break;
#else
case ITEM_MODEL_INTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[0].rfProtocol, attr);
if (attr) {
g_model.moduleData[INTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[INTERNAL_MODULE].rfProtocol, RF_PROTO_OFF, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[0].type = MODULE_TYPE_XJT;
g_model.moduleData[0].channelsStart = 0;
g_model.moduleData[0].channelsCount = 0;
}
}
break;
#endif
case ITEM_MODEL_TRAINER_MODE:
g_model.trainerMode = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_MODE, STR_VTRAINERMODES, g_model.trainerMode, 0, HAS_WIRELESS_TRAINER_HARDWARE() ? TRAINER_MODE_MASTER_BATTERY_COMPARTMENT : TRAINER_MODE_MASTER_CPPM_EXTERNAL_MODULE, attr, event);
break;
case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_EXTERNALRF);
break;
case ITEM_MODEL_EXTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, menuHorizontalPosition==0 ? attr : 0);
if (IS_MODULE_XJT(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, menuHorizontalPosition==1 ? attr : 0);
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
}
break;
case 1:
if (IS_MODULE_DSM2(EXTERNAL_MODULE))
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
else
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST, EE_MODEL, isRfProtocolAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
}
}
}
break;
case ITEM_MODEL_TRAINER_LABEL:
lcd_putsLeft(y, STR_TRAINER);
break;
case ITEM_MODEL_INTERNAL_MODULE_CHANNELS:
case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
case ITEM_MODEL_TRAINER_CHANNELS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, STR_CHANNELRANGE);
if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, menuHorizontalPosition==0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (menuHorizontalPosition==0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (menuHorizontalPosition==1 ? attr : 0));
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
#if defined(TARANIS_INTERNAL_PPM)
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_INTERNAL_MODULE_CHANNELS && g_model.moduleData[INTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_TRAINER_CHANNELS)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
#else
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM) || (k == ITEM_MODEL_TRAINER_CHANNELS)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
#endif
break;
}
}
}
break;
}
case ITEM_MODEL_INTERNAL_MODULE_BIND:
case ITEM_MODEL_EXTERNAL_MODULE_BIND:
case ITEM_MODEL_TRAINER_SETTINGS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
if (IS_MODULE_PPM(moduleIdx)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || menuHorizontalPosition==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || menuHorizontalPosition==2) ? attr : 0);
if (attr && s_editMode>0) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
break;
}
}
}
else {
horzpos_t l_posHorz = menuHorizontalPosition;
coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
if (IS_MODULE_XJT(moduleIdx) && g_model.moduleData[moduleIdx].rfProtocol == RF_PROTO_D8) {
xOffsetBind = 0;
lcd_putsLeft(y, INDENT "Receiver");
if (attr) l_posHorz += 1;
}
else {
lcd_putsLeft(y, STR_RXNUM);
}
if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && l_posHorz==0) {
if (s_editMode>0) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
if (checkIncDec_Ret) {
modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
}
}
if (s_editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
}
}
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
uint8_t newFlag = 0;
if (attr && l_posHorz>0 && s_editMode>0) {
if (l_posHorz == 1)
newFlag = MODULE_BIND;
else if (l_posHorz == 2) {
newFlag = MODULE_RANGECHECK;
}
}
moduleFlag[moduleIdx] = newFlag;
}
}
break;
}
case ITEM_MODEL_INTERNAL_MODULE_FAILSAFE:
case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, TR_FAILSAFE);
if (IS_MODULE_XJT(moduleIdx)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, menuHorizontalPosition==0 ? attr : 0);
if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, menuHorizontalPosition==1 ? attr : 0);
if (attr) {
if (moduleData.failsafeMode != FAILSAFE_CUSTOM) {
menuHorizontalPosition = 0;
}
if (menuHorizontalPosition == 0) {
if (s_editMode > 0) {
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
}
}
else if (menuHorizontalPosition == 1) {
s_editMode = 0;
if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
g_moduleIdx = moduleIdx;
pushMenu(menuModelFailsafe);
}
}
else {
drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
}
}
}
break;
}
}
}
#if defined(PXX)
if (IS_RANGECHECK_ENABLE()) {
displayPopup("RSSI: ");
lcd_outdezAtt(16+4*FW, 5*FH, TELEMETRY_RSSI(), BOLD);
}
#endif
}
void menuModelSetup(uint8_t event)
{
#if defined(CPUM64)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, });
#endif
MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);
TITLE(STR_MENUSETUP);
uint8_t sub = menuVerticalPosition - 1;
int8_t editMode = s_editMode;
for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+menuVerticalOffset;
LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
break;
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
{
TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
}
else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
}
else {
lcdDrawStringWithIndex(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
lcdPutsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, menuHorizontalPosition==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, menuHorizontalPosition==1 ? attr : 0, menuHorizontalPosition==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
break;
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
#if defined(CPUM2560)
if ((int16_t)timer->start < 0) timer->start=0;
if ((int16_t)timer->start > 5999) timer->start=32399; // 8:59:59
#endif
break;
}
}
}
break;
}
#if defined(CPUM2560)
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
{
TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
break;
}
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, menuHorizontalPosition<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, (menuHorizontalPosition>0 && !NO_HIGHLIGHT()) ? attr : 0);
if (attr && menuHorizontalPosition>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
START_NO_HIGHLIGHT();
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
#endif
break;
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcdDrawTextLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
case ITEM_MODEL_SWITCHES_WARNING:
{
lcdDrawTextLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
g_model.switchWarningEnable ^= (1 << menuHorizontalPosition);
eeDirty(EE_MODEL);
#else
if (menuHorizontalPosition < NUM_SWITCHES-1) {
g_model.switchWarningEnable ^= (1 << menuHorizontalPosition);
eeDirty(EE_MODEL);
}
#endif
break;
case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
#else
if (menuHorizontalPosition == NUM_SWITCHES-1) {
START_NO_HIGHLIGHT();
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
#endif
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
attr = 0;
if (IS_3POS(i)) {
c = '0'+(states & 0x03);
states >>= 2;
}
else {
if ((states & 0x01) && swactive)
attr = INVERS;
c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
states >>= 1;
}
if (line && (menuHorizontalPosition == i)) {
attr = BLINK;
if (swactive)
attr |= INVERS;
}
lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (menuHorizontalPosition == NUM_SWITCHES-1 && !NO_HIGHLIGHT()) ? line : 0);
#endif
}
break;
}
case ITEM_MODEL_BEEP_CENTER:
lcdDrawTextLeft(y, STR_BEEPCTR);
for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
// TODO flash saving, \001 not needed in STR_RETA123
coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
lcdDrawTextAtIndex(x, y, STR_RETA123, i, ((menuHorizontalPosition==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<menuHorizontalPosition);
eeDirty(EE_MODEL);
}
}
}
break;
case ITEM_MODEL_PPM1_PROTOCOL:
lcdDrawTextLeft(y, NO_INDENT(STR_PROTO));
lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, menuHorizontalPosition<=0 ? attr : 0);
if (IS_PPM_PROTOCOL(protocol)) {
lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, menuHorizontalPosition!=0 ? attr : 0);
}
else if (menuHorizontalPosition>0 && attr) {
MOVE_CURSOR_FROM_HERE();
}
if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
g_model.ppmFrameLength = g_model.ppmNCH * 8;
break;
}
}
break;
#if 0
case ITEM_MODEL_PPM2_PROTOCOL:
lcdDrawTextLeft(y, PSTR("Port2"));
lcdDrawTextAtIndex(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, menuHorizontalPosition<=0 ? attr : 0);
lcdDrawNumberAttUnit(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (menuHorizontalPosition<=0 ? attr : 0));
lcdDrawChar(lcdLastPos, y, '-');
lcdDrawNumberAttUnit(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (menuHorizontalPosition!=0 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
}
}
break;
case ITEM_MODEL_PPM2_PARAMS:
lcdDrawTextLeft(y, STR_PPMFRAME);
lcdDrawText(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
lcdDrawChar(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (menuHorizontalPosition < 0 || menuHorizontalPosition==1) ? attr : 0);
lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (menuHorizontalPosition < 0 || menuHorizontalPosition==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
break;
}
}
break;
#endif
case ITEM_MODEL_PPM1_PARAMS:
if (IS_PPM_PROTOCOL(protocol)) {
lcdDrawTextLeft(y, STR_PPMFRAME);
lcdDrawText(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (menuHorizontalPosition<=0 ? attr : 0) | PREC1|LEFT);
lcdDrawChar(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcdDrawNumberAttUnit(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || menuHorizontalPosition==1) ? attr : 0);
lcdDrawCharAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || menuHorizontalPosition==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (menuHorizontalPosition) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
break;
}
}
}
#if defined(DSM2) || defined(PXX)
else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
if (attr && menuHorizontalPosition > 1) {
REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
}
lcdDrawTextLeft(y, STR_RXNUM);
lcdDrawNumberNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (menuHorizontalPosition<=0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && (menuHorizontalPosition==0 && (editMode>0 || p1valdiff))) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
}
#if defined(PXX)
if (protocol == PROTO_PXX) {
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, menuHorizontalPosition!=0 ? attr : 0);
uint8_t newFlag = 0;
if (attr && menuHorizontalPosition>0 && editMode>0) {
// send reset code
newFlag = MODULE_BIND;
}
moduleFlag[0] = newFlag;
}
#endif
#if defined(DSM2)
if (IS_DSM2_PROTOCOL(protocol)) {
lcdDrawTextAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, menuHorizontalPosition!=0 ? attr : 0);
moduleFlag[0] = (attr && menuHorizontalPosition>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
}
#endif
}
#endif
break;
}
}
void menuModelSetup(uint8_t event)
{
#if defined(CPUARM)
#define IF_EXTERNAL_MODULE_XJT(x) (IS_MODULE_XJT(EXTERNAL_MODULE) ? (uint8_t)x : HIDDEN_ROW)
#define IF_EXTERNAL_MODULE_ON(x) (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_NONE ? HIDDEN_ROW : (uint8_t)(x))
#define IS_D8_RX(x) (g_model.moduleData[x].rfProtocol == RF_PROTO_D8)
#define EXTERNAL_MODULE_CHANNELS_ROWS() IF_EXTERNAL_MODULE_ON(IS_MODULE_DSM2(EXTERNAL_MODULE) ? (uint8_t)0 : (uint8_t)1)
#define EXTERNAL_MODULE_SETTINGS_ROWS() (IS_MODULE_XJT(EXTERNAL_MODULE) && IS_D8_RX(EXTERNAL_MODULE)) ? (uint8_t)1 : (IS_MODULE_PPM(EXTERNAL_MODULE) || IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)2 : HIDDEN_ROW
#if defined(PCBSKY9X) && defined(REVX)
#define OUTPUT_TYPE_ROWS() (IS_MODULE_PPM(EXTERNAL_MODULE) ? (uint8_t)0 : HIDDEN_ROW) ,
#else
#define OUTPUT_TYPE_ROWS()
#endif
#define TRAINER_CHANNELS_ROWS() (HIDDEN_ROW)
#define PORT_CHANNELS_ROWS(x) (x==EXTERNAL_MODULE ? EXTERNAL_MODULE_CHANNELS_ROWS() : 0)
#define FAILSAFE_ROWS(x) ((g_model.moduleData[x].rfProtocol==RF_PROTO_X16 || g_model.moduleData[x].rfProtocol==RF_PROTO_LR12) ? (g_model.moduleData[x].failsafeMode==FAILSAFE_CUSTOM ? (uint8_t)1 : (uint8_t)0) : HIDDEN_ROW)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES (1+ITEM_MODEL_SETUP_MAX)
#define POT_WARN_ITEMS() ((g_model.nPotsToWarn >> 6) ? (uint8_t)NUM_POTS : (uint8_t)0)
#define TIMER_ROWS 2, 0, CASE_PERSISTENT_TIMERS(0) 0, 0
#if (defined(PCBSKY9X) && !defined(REVA) && !defined(REVX))
#define EXTRA_MODULE_ROWS LABEL(ExtraModule), 1, 2,
#else
#define EXTRA_MODULE_ROWS
#endif
#define TRAINER_MODULE_ROWS
MENU_TAB({ 0, 0, TIMER_ROWS, TIMER_ROWS, TIMER_ROWS, 0, 1, 0, 0, 0, 0, 0, CASE_CPUARM(LABEL(PreflightCheck)) CASE_CPUARM(0) 0, 6, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, 0, LABEL(ExternalModule), (IS_MODULE_XJT(EXTERNAL_MODULE) || IS_MODULE_DSM2(EXTERNAL_MODULE)) ? (uint8_t)1 : (uint8_t)0, EXTERNAL_MODULE_CHANNELS_ROWS(), EXTERNAL_MODULE_SETTINGS_ROWS(), OUTPUT_TYPE_ROWS() IF_EXTERNAL_MODULE_XJT(FAILSAFE_ROWS(EXTERNAL_MODULE)), EXTRA_MODULE_ROWS TRAINER_MODULE_ROWS });
#elif defined(CPUM64)
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2 });
#else
#define CURSOR_ON_CELL (true)
#define MODEL_SETUP_MAX_LINES ((IS_PPM_PROTOCOL(protocol)||IS_DSM2_PROTOCOL(protocol)||IS_PXX_PROTOCOL(protocol)) ? 1+ITEM_MODEL_SETUP_MAX : ITEM_MODEL_SETUP_MAX)
uint8_t protocol = g_model.protocol;
MENU_TAB({ 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 2, CASE_PERSISTENT_TIMERS(0) 0, 0, 0, 1, 0, 0, 0, 0, 0, NUM_SWITCHES, NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS-1, FIELD_PROTOCOL_MAX, 2, CASE_PCBSKY9X(1) CASE_PCBSKY9X(2) });
#endif
MENU_CHECK(menuTabModel, e_ModelSetup, MODEL_SETUP_MAX_LINES);
#if defined(CPUARM) && (defined(DSM2) || defined(PXX))
if (menuEvent) {
moduleFlag[0] = 0;
#if NUM_MODULES > 1
moduleFlag[1] = 0;
#endif
}
#endif
TITLE(STR_MENUSETUP);
uint8_t sub = m_posVert - 1;
int8_t editMode = s_editMode;
for (uint8_t i=0; i<NUM_BODY_LINES; ++i) {
coord_t y = MENU_HEADER_HEIGHT + 1 + i*FH;
uint8_t k = i+s_pgOfs;
#if defined(CPUARM)
for (int j=0; j<=k; j++) {
if (mstate_tab[j+1] == HIDDEN_ROW) {
if (++k >= (int)DIM(mstate_tab)) {
return;
}
}
}
#endif
LcdFlags blink = ((editMode>0) ? BLINK|INVERS : INVERS);
LcdFlags attr = (sub == k ? blink : 0);
switch(k) {
case ITEM_MODEL_NAME:
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_MODELNAME, g_model.header.name, sizeof(g_model.header.name), event, attr);
#if defined(CPUARM)
memcpy(modelHeaders[g_eeGeneral.currModel].name, g_model.header.name, sizeof(g_model.header.name));
#endif
break;
#if defined(CPUARM)
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER3:
{
unsigned int timerIdx = (k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0));
TimerData * timer = &g_model.timers[timerIdx];
putsStrIdx(0*FW, y, STR_TIMER, timerIdx+1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
{
int8_t timerMode = timer->mode;
if (timerMode < 0) timerMode -= TMRMODE_COUNT-1;
CHECK_INCDEC_MODELVAR_CHECK(event, timerMode, -TMRMODE_COUNT-SWSRC_LAST+1, TMRMODE_COUNT+SWSRC_LAST-1, isSwitchAvailableInTimers);
if (timerMode < 0) timerMode += TMRMODE_COUNT-1;
timer->mode = timerMode;
#if defined(AUTOSWITCH)
if (s_editMode>0) {
int8_t val = timer->mode - (TMRMODE_COUNT-1);
int8_t switchVal = checkIncDecMovedSwitch(val);
if (val != switchVal) {
timer->mode = switchVal + (TMRMODE_COUNT-1);
eeDirty(EE_MODEL);
}
}
#endif
break;
}
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
if ((int16_t)timer->start < 0) timer->start=0;
break;
}
}
break;
}
case ITEM_MODEL_TIMER1_NAME:
case ITEM_MODEL_TIMER2_NAME:
case ITEM_MODEL_TIMER3_NAME:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
editSingleName(MODEL_SETUP_2ND_COLUMN, y, STR_TIMER_NAME, timer->name, sizeof(timer->name), event, attr);
break;
}
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER3_MINUTE_BEEP:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
break;
}
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER3_COUNTDOWN_BEEP:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->countdownBeep = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, STR_VBEEPCOUNTDOWN, timer->countdownBeep, 0, 2, attr, event);
break;
}
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
case ITEM_MODEL_TIMER3_PERSISTENT:
{
TimerData * timer = &g_model.timers[k>=ITEM_MODEL_TIMER3 ? 2 : (k>=ITEM_MODEL_TIMER2 ? 1 : 0)];
timer->persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer->persistent, 0, 2, attr, event);
break;
}
#else
case ITEM_MODEL_TIMER1:
case ITEM_MODEL_TIMER2:
case ITEM_MODEL_TIMER1_MINUTE_BEEP:
case ITEM_MODEL_TIMER2_MINUTE_BEEP:
case ITEM_MODEL_TIMER1_COUNTDOWN_BEEP:
case ITEM_MODEL_TIMER2_COUNTDOWN_BEEP:
{
TimerData *timer = &g_model.timers[k>=ITEM_MODEL_TIMER2 ? 1 : 0];
if (k==ITEM_MODEL_TIMER1_MINUTE_BEEP || k==ITEM_MODEL_TIMER2_MINUTE_BEEP) {
timer->minuteBeep = onoffMenuItem(timer->minuteBeep, MODEL_SETUP_2ND_COLUMN, y, STR_MINUTEBEEP, attr, event);
}
else if (k==ITEM_MODEL_TIMER1_COUNTDOWN_BEEP || k==ITEM_MODEL_TIMER2_COUNTDOWN_BEEP) {
timer->countdownBeep = onoffMenuItem(timer->countdownBeep, MODEL_SETUP_2ND_COLUMN, y, STR_BEEPCOUNTDOWN, attr, event);
}
else {
putsStrIdx(0*FW, y, STR_TIMER, k>=ITEM_MODEL_TIMER2 ? 2 : 1);
putsTimerMode(MODEL_SETUP_2ND_COLUMN, y, timer->mode, m_posHorz==0 ? attr : 0);
putsTimer(MODEL_SETUP_2ND_COLUMN+5*FW-2+5*FWNUM+1, y, timer->start, m_posHorz==1 ? attr : 0, m_posHorz==2 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
div_t qr = div(timer->start, 60);
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_CHECK(event, timer->mode, SWSRC_FIRST, TMRMODE_COUNT+SWSRC_LAST-1/*SWSRC_None removed*/, isSwitchAvailableInTimers);
break;
case 1:
CHECK_INCDEC_MODELVAR_ZERO(event, qr.quot, 59);
timer->start = qr.rem + qr.quot*60;
break;
case 2:
qr.rem -= checkIncDecModel(event, qr.rem+2, 1, 62)-2;
timer->start -= qr.rem ;
break;
}
}
}
break;
}
#if defined(CPUM2560)
case ITEM_MODEL_TIMER1_PERSISTENT:
case ITEM_MODEL_TIMER2_PERSISTENT:
{
TimerData &timer = g_model.timers[k==ITEM_MODEL_TIMER2_PERSISTENT];
timer.persistent = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_PERSISTENT, STR_VPERSISTENT, timer.persistent, 0, 2, attr, event);
break;
}
#endif
#endif
case ITEM_MODEL_EXTENDED_LIMITS:
ON_OFF_MENU_ITEM(g_model.extendedLimits, MODEL_SETUP_2ND_COLUMN, y, STR_ELIMITS, attr, event);
break;
case ITEM_MODEL_EXTENDED_TRIMS:
#if defined(CPUM64)
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, attr, event);
#else
ON_OFF_MENU_ITEM(g_model.extendedTrims, MODEL_SETUP_2ND_COLUMN, y, STR_ETRIMS, m_posHorz<=0 ? attr : 0, event==EVT_KEY_BREAK(KEY_ENTER) ? event : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_RESET_BTN, m_posHorz>0 && !s_noHi ? attr : 0);
if (attr && m_posHorz>0) {
s_editMode = 0;
if (event==EVT_KEY_LONG(KEY_ENTER)) {
s_noHi = NO_HI_LEN;
for (uint8_t i=0; i<MAX_FLIGHT_MODES; i++) {
memclear(&g_model.flightModeData[i], TRIMS_ARRAY_SIZE);
}
eeDirty(EE_MODEL);
AUDIO_WARNING1();
}
}
#endif
break;
#if defined(CPUARM)
case ITEM_MODEL_DISPLAY_TRIMS:
g_model.displayTrims = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_DISPLAY_TRIMS, STR_VDISPLAYTRIMS, g_model.displayTrims, 0, 2, attr, event);
break;
#endif
case ITEM_MODEL_TRIM_INC:
g_model.trimInc = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_TRIMINC, STR_VTRIMINC, g_model.trimInc, -2, 2, attr, event);
break;
case ITEM_MODEL_THROTTLE_REVERSED:
ON_OFF_MENU_ITEM(g_model.throttleReversed, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEREVERSE, attr, event ) ;
break;
case ITEM_MODEL_THROTTLE_TRACE:
{
lcd_putsLeft(y, STR_TTRACE);
if (attr) CHECK_INCDEC_MODELVAR_ZERO(event, g_model.thrTraceSrc, NUM_POTS+NUM_CHNOUT);
uint8_t idx = g_model.thrTraceSrc + MIXSRC_Thr;
if (idx > MIXSRC_Thr)
idx += 1;
if (idx >= MIXSRC_FIRST_POT+NUM_POTS)
idx += MIXSRC_CH1 - MIXSRC_FIRST_POT - NUM_POTS;
putsMixerSource(MODEL_SETUP_2ND_COLUMN, y, idx, attr);
break;
}
case ITEM_MODEL_THROTTLE_TRIM:
ON_OFF_MENU_ITEM(g_model.thrTrim, MODEL_SETUP_2ND_COLUMN, y, STR_TTRIM, attr, event);
break;
#if defined(CPUARM)
case ITEM_MODEL_PREFLIGHT_LABEL:
lcd_putsLeft(y, STR_PREFLIGHT);
break;
case ITEM_MODEL_CHECKLIST_DISPLAY:
ON_OFF_MENU_ITEM(g_model.displayChecklist, MODEL_SETUP_2ND_COLUMN, y, STR_CHECKLIST, attr, event);
break;
#endif
case ITEM_MODEL_THROTTLE_WARNING:
g_model.disableThrottleWarning = !onoffMenuItem(!g_model.disableThrottleWarning, MODEL_SETUP_2ND_COLUMN, y, STR_THROTTLEWARNING, attr, event);
break;
case ITEM_MODEL_SWITCHES_WARNING:
{
lcd_putsLeft(y, STR_SWITCHWARNING);
swarnstate_t states = g_model.switchWarningState;
char c;
if (attr) {
s_editMode = 0;
if (!READ_ONLY()) {
switch (event) {
CASE_EVT_ROTARY_BREAK
case EVT_KEY_BREAK(KEY_ENTER):
#if defined(CPUM64)
g_model.switchWarningEnable ^= (1 << m_posHorz);
eeDirty(EE_MODEL);
#else
if (m_posHorz < NUM_SWITCHES-1) {
g_model.switchWarningEnable ^= (1 << m_posHorz);
eeDirty(EE_MODEL);
}
#endif
break;
case EVT_KEY_LONG(KEY_ENTER):
#if defined(CPUM64)
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
#else
if (m_posHorz == NUM_SWITCHES-1) {
s_noHi = NO_HI_LEN;
getMovedSwitch();
g_model.switchWarningState = switches_states;
AUDIO_WARNING1();
eeDirty(EE_MODEL);
}
#endif
killEvents(event);
break;
}
}
}
LcdFlags line = attr;
for (uint8_t i=0; i<NUM_SWITCHES-1/*not on TRN switch*/; i++) {
uint8_t swactive = !(g_model.switchWarningEnable & 1 << i);
attr = 0;
if (IS_3POS(i)) {
c = '0'+(states & 0x03);
states >>= 2;
}
else {
if ((states & 0x01) && swactive)
attr = INVERS;
c = pgm_read_byte(STR_VSWITCHES - 2 + 9 + (3*(i+1)));
states >>= 1;
}
if (line && (m_posHorz == i)) {
attr = BLINK;
if (swactive)
attr |= INVERS;
}
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+i*FW, y, (swactive || (attr & BLINK)) ? c : '-', attr);
#if !defined(CPUM64)
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+(NUM_SWITCHES*FW), y, PSTR("<]"), (m_posHorz == NUM_SWITCHES-1 && !s_noHi) ? line : 0);
#endif
}
break;
}
case ITEM_MODEL_BEEP_CENTER:
lcd_putsLeft(y, STR_BEEPCTR);
for (uint8_t i=0; i<NUM_STICKS+NUM_POTS+NUM_ROTARY_ENCODERS; i++) {
// TODO flash saving, \001 not needed in STR_RETA123
coord_t x = MODEL_SETUP_2ND_COLUMN+i*FW;
lcd_putsiAtt(x, y, STR_RETA123, i, ((m_posHorz==i) && attr) ? BLINK|INVERS : (((g_model.beepANACenter & ((BeepANACenter)1<<i)) || (attr && CURSOR_ON_LINE())) ? INVERS : 0 ) );
}
if (attr && CURSOR_ON_CELL) {
if (event==EVT_KEY_BREAK(KEY_ENTER) || p1valdiff) {
if (READ_ONLY_UNLOCKED()) {
s_editMode = 0;
g_model.beepANACenter ^= ((BeepANACenter)1<<m_posHorz);
eeDirty(EE_MODEL);
}
}
}
break;
#if defined(CPUARM)
case ITEM_MODEL_USE_GLOBAL_FUNCTIONS:
lcd_putsLeft(y, STR_USE_GLOBAL_FUNCS);
menu_lcd_onoff(MODEL_SETUP_2ND_COLUMN, y, !g_model.noGlobalFunctions, attr);
if (attr) g_model.noGlobalFunctions = !checkIncDecModel(event, !g_model.noGlobalFunctions, 0, 1);
break;
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_LABEL:
lcd_putsLeft(y, "RF Port 2 (PPM)");
break;
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_LABEL:
lcd_putsLeft(y, TR_EXTERNALRF);
break;
case ITEM_MODEL_EXTERNAL_MODULE_MODE:
lcd_putsLeft(y, STR_MODE);
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_TARANIS_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].type, m_posHorz==0 ? attr : 0);
if (IS_MODULE_XJT(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_XJT_PROTOCOLS, 1+g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
else if (IS_MODULE_DSM2(EXTERNAL_MODULE))
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+5*FW, y, STR_DSM_PROTOCOLS, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, m_posHorz==1 ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
g_model.moduleData[EXTERNAL_MODULE].type = checkIncDec(event, g_model.moduleData[EXTERNAL_MODULE].type, MODULE_TYPE_NONE, MODULE_TYPE_COUNT-1, EE_MODEL, isModuleAvailable);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].rfProtocol = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
if (g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)
g_model.moduleData[EXTERNAL_MODULE].channelsCount = 0;
else
g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
}
break;
case 1:
if (IS_MODULE_DSM2(EXTERNAL_MODULE))
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, DSM2_PROTO_LP45, DSM2_PROTO_DSMX);
else
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[EXTERNAL_MODULE].rfProtocol, RF_PROTO_X16, RF_PROTO_LAST);
if (checkIncDec_Ret) {
g_model.moduleData[EXTERNAL_MODULE].channelsStart = 0;
g_model.moduleData[EXTERNAL_MODULE].channelsCount = MAX_EXTERNAL_MODULE_CHANNELS();
}
}
}
break;
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_CHANNELS:
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_CHANNELS:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, STR_CHANNELRANGE);
if ((int8_t)PORT_CHANNELS_ROWS(moduleIdx) >= 0) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN, y, STR_CH, m_posHorz==0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, moduleData.channelsStart+1, LEFT | (m_posHorz==0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, moduleData.channelsStart+NUM_CHANNELS(moduleIdx), LEFT | (m_posHorz==1 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.channelsStart, 32-8-moduleData.channelsCount);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.channelsCount, -4, min<int8_t>(MAX_CHANNELS(moduleIdx), 32-8-moduleData.channelsStart));
if ((k == ITEM_MODEL_EXTERNAL_MODULE_CHANNELS && g_model.moduleData[EXTERNAL_MODULE].type == MODULE_TYPE_PPM)) {
SET_DEFAULT_PPM_FRAME_LENGTH(moduleIdx);
}
break;
}
}
}
break;
}
#endif
#if defined(PCBSKY9X) && !defined(REVX)
case ITEM_MODEL_EXTRA_MODULE_BIND:
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_BIND:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
if (IS_MODULE_PPM(moduleIdx)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)moduleData.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (moduleData.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, moduleData.ppmPulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, moduleData.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.ppmPulsePol, 1);
break;
}
}
}
else {
horzpos_t l_posHorz = m_posHorz;
coord_t xOffsetBind = MODEL_SETUP_BIND_OFS;
if (IS_MODULE_XJT(moduleIdx) && IS_D8_RX(moduleIdx)) {
xOffsetBind = 0;
lcd_putsLeft(y, INDENT "Receiver");
if (attr) l_posHorz += 1;
}
else {
lcd_putsLeft(y, STR_RXNUM);
}
if (IS_MODULE_XJT(moduleIdx) || IS_MODULE_DSM2(moduleIdx)) {
if (xOffsetBind) lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[moduleIdx], (l_posHorz==0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && l_posHorz==0) {
if (editMode>0 || p1valdiff) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[moduleIdx], IS_MODULE_DSM2(moduleIdx) ? 20 : 63);
if (checkIncDec_Ret) {
modelHeaders[g_eeGeneral.currModel].modelId[moduleIdx] = g_model.header.modelId[moduleIdx];
}
}
if (editMode==0 && event==EVT_KEY_BREAK(KEY_ENTER)) {
checkModelIdUnique(g_eeGeneral.currModel, moduleIdx);
}
}
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+xOffsetBind, y, STR_MODULE_BIND, l_posHorz==1 ? attr : 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+MODEL_SETUP_RANGE_OFS+xOffsetBind, y, STR_MODULE_RANGE, l_posHorz==2 ? attr : 0);
uint8_t newFlag = 0;
if (attr && l_posHorz>0 && s_editMode>0) {
if (l_posHorz == 1)
newFlag = MODULE_BIND;
else if (l_posHorz == 2) {
newFlag = MODULE_RANGECHECK;
}
}
moduleFlag[moduleIdx] = newFlag;
}
}
break;
}
#endif
#if defined(PCBSKY9X) && defined(REVX)
case ITEM_MODEL_EXTERNAL_MODULE_OUTPUT_TYPE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
moduleData.ppmOutputType = selectMenuItem(MODEL_SETUP_2ND_COLUMN, y, STR_OUTPUT_TYPE, STR_VOUTPUT_TYPE, moduleData.ppmOutputType, 0, 1, attr, event);
break;
}
#endif
#if defined(CPUARM)
case ITEM_MODEL_EXTERNAL_MODULE_FAILSAFE:
{
uint8_t moduleIdx = CURRENT_MODULE_EDITED(k);
ModuleData & moduleData = g_model.moduleData[moduleIdx];
lcd_putsLeft(y, TR_FAILSAFE);
if (IS_MODULE_XJT(moduleIdx)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VFAILSAFE, moduleData.failsafeMode, m_posHorz==0 ? attr : 0);
if (moduleData.failsafeMode == FAILSAFE_CUSTOM) lcd_putsAtt(MODEL_SETUP_2ND_COLUMN + MODEL_SETUP_SET_FAILSAFE_OFS, y, STR_SET, m_posHorz==1 ? attr : 0);
if (attr) {
if (moduleData.failsafeMode != FAILSAFE_CUSTOM)
m_posHorz = 0;
if (m_posHorz==0) {
if (editMode>0 || p1valdiff) {
CHECK_INCDEC_MODELVAR_ZERO(event, moduleData.failsafeMode, FAILSAFE_LAST);
if (checkIncDec_Ret) SEND_FAILSAFE_NOW(moduleIdx);
}
}
else if (m_posHorz==1) {
s_editMode = 0;
if (moduleData.failsafeMode==FAILSAFE_CUSTOM && event==EVT_KEY_FIRST(KEY_ENTER)) {
g_moduleIdx = moduleIdx;
pushMenu(menuModelFailsafe);
}
}
else {
drawFilledRect(MODEL_SETUP_2ND_COLUMN, y, LCD_W-MODEL_SETUP_2ND_COLUMN-MENUS_SCROLLBAR_WIDTH, 8);
}
}
}
break;
}
#endif
#if !defined(CPUARM)
case ITEM_MODEL_PPM1_PROTOCOL:
lcd_putsLeft(y, NO_INDENT(STR_PROTO));
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, protocol, m_posHorz<=0 ? attr : 0);
if (IS_PPM_PROTOCOL(protocol)) {
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN+7*FW, y, STR_NCHANNELS, g_model.ppmNCH+2, m_posHorz!=0 ? attr : 0);
}
else if (m_posHorz>0 && attr) {
MOVE_CURSOR_FROM_HERE();
}
if (attr && (editMode>0 || p1valdiff || (!IS_PPM_PROTOCOL(protocol) && !IS_DSM2_PROTOCOL(protocol)))) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.protocol, PROTO_MAX-1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmNCH, -2, 4);
g_model.ppmFrameLength = g_model.ppmNCH * 8;
break;
}
}
break;
#endif
#if 0
case ITEM_MODEL_PPM2_PROTOCOL:
lcd_putsLeft(y, PSTR("Port2"));
lcd_putsiAtt(MODEL_SETUP_2ND_COLUMN, y, STR_VPROTOS, 0, 0);
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW+3, y, STR_CH, m_posHorz<=0 ? attr : 0);
lcd_outdezAtt(lcdLastPos, y, g_model.moduleData[1].channelsStart+1, LEFT | (m_posHorz<=0 ? attr : 0));
lcd_putc(lcdLastPos, y, '-');
lcd_outdezAtt(lcdLastPos + FW+1, y, g_model.moduleData[1].channelsStart+8+g_model.moduleData[1].channelsCount, LEFT | (m_posHorz!=0 ? attr : 0));
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].channelsStart, 32-8-g_model.moduleData[1].channelsCount);
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].channelsCount, -4, min<int8_t>(8, 32-8-g_model.moduleData[1].channelsStart));
SET_DEFAULT_PPM_FRAME_LENGTH(1);
break;
}
}
break;
case ITEM_MODEL_PPM2_PARAMS:
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.moduleData[1].ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.moduleData[1].ppmDelay*50)+300, (m_posHorz < 0 || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.moduleData[1].ppmPulsePol ? '+' : '-', (m_posHorz < 0 || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.moduleData[1].ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.moduleData[1].ppmPulsePol, 1);
break;
}
}
break;
#endif
#if !defined(CPUARM)
case ITEM_MODEL_PPM1_PARAMS:
if (IS_PPM_PROTOCOL(protocol)) {
lcd_putsLeft(y, STR_PPMFRAME);
lcd_puts(MODEL_SETUP_2ND_COLUMN+3*FW, y, STR_MS);
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN, y, (int16_t)g_model.ppmFrameLength*5 + 225, (m_posHorz<=0 ? attr : 0) | PREC1|LEFT);
lcd_putc(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, 'u');
lcd_outdezAtt(MODEL_SETUP_2ND_COLUMN+8*FW+2, y, (g_model.ppmDelay*50)+300, (CURSOR_ON_LINE() || m_posHorz==1) ? attr : 0);
lcd_putcAtt(MODEL_SETUP_2ND_COLUMN+10*FW, y, g_model.pulsePol ? '+' : '-', (CURSOR_ON_LINE() || m_posHorz==2) ? attr : 0);
if (attr && (editMode>0 || p1valdiff)) {
switch (m_posHorz) {
case 0:
CHECK_INCDEC_MODELVAR(event, g_model.ppmFrameLength, -20, 35);
break;
case 1:
CHECK_INCDEC_MODELVAR(event, g_model.ppmDelay, -4, 10);
break;
case 2:
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.pulsePol, 1);
break;
}
}
}
#if defined(DSM2) || defined(PXX)
else if (IS_DSM2_PROTOCOL(protocol) || IS_PXX_PROTOCOL(protocol)) {
if (attr && m_posHorz > 1) {
REPEAT_LAST_CURSOR_MOVE(); // limit 3 column row to 2 colums (Rx_Num and RANGE fields)
}
lcd_putsLeft(y, STR_RXNUM);
lcd_outdezNAtt(MODEL_SETUP_2ND_COLUMN, y, g_model.header.modelId[0], (m_posHorz<=0 ? attr : 0) | LEADING0|LEFT, 2);
if (attr && (m_posHorz==0 && (editMode>0 || p1valdiff))) {
CHECK_INCDEC_MODELVAR_ZERO(event, g_model.header.modelId[0], 99);
}
#if defined(PXX)
if (protocol == PROTO_PXX) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_SYNCMENU, m_posHorz!=0 ? attr : 0);
uint8_t newFlag = 0;
if (attr && m_posHorz>0 && editMode>0) {
// send reset code
newFlag = MODULE_BIND;
}
moduleFlag[0] = newFlag;
}
#endif
#if defined(DSM2)
if (IS_DSM2_PROTOCOL(protocol)) {
lcd_putsAtt(MODEL_SETUP_2ND_COLUMN+4*FW, y, STR_MODULE_RANGE, m_posHorz!=0 ? attr : 0);
moduleFlag[0] = (attr && m_posHorz>0 && editMode>0) ? MODULE_RANGECHECK : 0; // [MENU] key toggles range check mode
}
#endif
}
#endif
break;
#endif
}
}