/**
* SLIP netif initialization
*
* Call the arch specific sio_open and remember
* the opened device in the state field of the netif.
*
* @param netif the lwip network interface structure for this slipif
* @return ERR_OK if serial line could be opened,
* ERR_MEM if no memory could be allocated,
* ERR_IF is serial line couldn't be opened
*
* @note netif->num must contain the number of the serial port to open
* (0 by default). If netif->state is != NULL, it is interpreted as an
* u8_t pointer pointing to the serial port number instead of netif->num.
*
*/
err_t
slipif_init(struct netif *netif)
{
struct slipif_priv *priv;
u8_t sio_num;
LWIP_DEBUGF(SLIP_DEBUG, ("slipif_init: netif->num=%"U16_F"\n", (u16_t)netif->num));
/* Allocate private data */
priv = (struct slipif_priv *)mem_malloc(sizeof(struct slipif_priv));
if (!priv) {
return ERR_MEM;
}
netif->name[0] = 's';
netif->name[1] = 'l';
#if LWIP_IPV4
netif->output = slipif_output_v4;
#endif /* LWIP_IPV4 */
#if LWIP_IPV6
netif->output_ip6 = slipif_output_v6;
#endif /* LWIP_IPV6 */
netif->mtu = SLIP_MAX_SIZE;
/* netif->state or netif->num contain the port number */
if (netif->state != NULL) {
sio_num = *(u8_t*)netif->state;
} else {
sio_num = netif->num;
}
/* Try to open the serial port. */
priv->sd = sio_open(sio_num);
if (!priv->sd) {
/* Opening the serial port failed. */
mem_free(priv);
return ERR_IF;
}
/* Initialize private data */
priv->p = NULL;
priv->q = NULL;
priv->state = SLIP_RECV_NORMAL;
priv->i = 0;
priv->recved = 0;
#if SLIP_RX_FROM_ISR
priv->rxpackets = NULL;
#endif
netif->state = priv;
/* initialize the snmp variables and counters inside the struct netif */
MIB2_INIT_NETIF(netif, snmp_ifType_slip, SLIP_SIO_SPEED(priv->sd));
#if SLIP_USE_RX_THREAD
/* Create a thread to poll the serial line. */
sys_thread_new(SLIPIF_THREAD_NAME, slipif_loop_thread, netif,
SLIPIF_THREAD_STACKSIZE, SLIPIF_THREAD_PRIO);
#endif /* SLIP_USE_RX_THREAD */
return ERR_OK;
}
static err_t
netif_init(struct netif *netif)
{
netif->linkoutput = netif_output;
netif->output = etharp_output;
netif->output_ip6 = ethip6_output;
netif->mtu = ETHERNET_MTU;
netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_ETHERNET | NETIF_FLAG_IGMP | NETIF_FLAG_MLD6;
MIB2_INIT_NETIF(netif, snmp_ifType_ethernet_csmacd, 100000000);
SMEMCPY(netif->hwaddr, your_mac_address_goes_here, sizeof(netif->hwaddr));
netif->hwaddr_len = sizeof(netif->hwaddr);
return ERR_OK;
}
/**
* Should be called at the beginning of the program to set up the
* network interface. It calls the function low_level_init() to do the
* actual setup of the hardware.
*
* This function should be passed as a parameter to netif_add().
*
* @param netif the lwip network interface structure for this ethernetif
* @return ERR_OK if the loopif is initialized
* ERR_MEM if private data couldn't be allocated
* any other err_t on error
*/
err_t ethernetif_init(struct netif *netif)
{
struct ethernetif *ethernetif;
LWIP_ASSERT("netif != NULL", (netif != NULL));
ethernetif = mem_malloc(sizeof(struct ethernetif));
if (ethernetif == NULL) {
LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\r\n"));
return ERR_MEM;
}
#if LWIP_NETIF_HOSTNAME
/* Initialize interface hostname */
netif->hostname = "cksy-lwip";
#endif /* LWIP_NETIF_HOSTNAME */
/*
* Initialize the snmp variables and counters inside the struct netif.
* The last argument should be replaced with your link speed, in units
* of bits per second.
*/
MIB2_INIT_NETIF(netif, snmp_ifType_ethernet_csmacd, LINK_SPEED_OF_YOUR_NETIF_IN_BPS);
netif->state = ethernetif;
netif->name[0] = IFNAME0;
netif->name[1] = IFNAME1;
/* We directly use etharp_output() here to save a function call.
* You can instead declare your own function an call etharp_output()
* from it if you have to do some checks before sending (e.g. if link
* is available...) */
#if LWIP_IPV4
netif->output = etharp_output;
#endif
#if LWIP_IPV6
netif->output_ip6 = ethip6_output;
#endif /* LWIP_IPV6 */
netif->linkoutput = low_level_output;
ethernetif->ethaddr = (struct eth_addr *) & (netif->hwaddr[0]);
/* initialize the hardware */
low_level_init(netif);
return ERR_OK;
}
/**
* Initialize a lwip network interface structure for a loopback interface
*
* @param netif the lwip network interface structure for this loopif
* @return ERR_OK if the loopif is initialized
* ERR_MEM if private data couldn't be allocated
*/
static err_t
netif_loopif_init(struct netif *netif)
{
/* initialize the snmp variables and counters inside the struct netif
* ifSpeed: no assumption can be made!
*/
MIB2_INIT_NETIF(netif, snmp_ifType_softwareLoopback, 0);
netif->name[0] = 'l';
netif->name[1] = 'o';
#if LWIP_IPV4
netif->output = netif_loop_output_ipv4;
#endif
#if LWIP_IPV6
netif->output_ip6 = netif_loop_output_ipv6;
#endif
#if LWIP_LOOPIF_MULTICAST
netif->flags |= NETIF_FLAG_IGMP;
#endif
return ERR_OK;
}
