// ================================================ ====== ==== ==== == =
int ML_Epetra::FaceMatrixFreePreconditioner::NodeAggregate(ML_Aggregate_Struct *&MLAggr,ML_Operator *&P,ML_Operator* TMT_ML,int &NumAggregates){
/* Pull Teuchos Options */
string CoarsenType = List_.get("aggregation: type", "Uncoupled");
double Threshold = List_.get("aggregation: threshold", 0.0);
int NodesPerAggr = List_.get("aggregation: nodes per aggregate",
ML_Aggregate_Get_OptimalNumberOfNodesPerAggregate());
string PrintMsg_ = "FMFP (Level 0): ";
ML_Aggregate_Create(&MLAggr);
ML_Aggregate_Set_MaxLevels(MLAggr, 2);
ML_Aggregate_Set_StartLevel(MLAggr, 0);
ML_Aggregate_Set_Threshold(MLAggr, Threshold);
ML_Aggregate_Set_MaxCoarseSize(MLAggr,1);
MLAggr->cur_level = 0;
ML_Aggregate_Set_Reuse(MLAggr);
MLAggr->keep_agg_information = 1;
P = ML_Operator_Create(ml_comm_);
/* Process Teuchos Options */
if (CoarsenType == "Uncoupled")
ML_Aggregate_Set_CoarsenScheme_Uncoupled(MLAggr);
else if (CoarsenType == "Uncoupled-MIS"){
ML_Aggregate_Set_CoarsenScheme_UncoupledMIS(MLAggr);
}
else if (CoarsenType == "METIS"){
ML_Aggregate_Set_CoarsenScheme_METIS(MLAggr);
ML_Aggregate_Set_NodesPerAggr(0, MLAggr, 0, NodesPerAggr);
}/*end if*/
else {
if(!Comm_->MyPID()) printf("FMFP: Unsupported (1,1) block aggregation type(%s), resetting to uncoupled-mis\n",CoarsenType.c_str());
ML_Aggregate_Set_CoarsenScheme_UncoupledMIS(MLAggr);
}
/* Aggregate Nodes */
int printlevel=ML_Get_PrintLevel();
ML_Set_PrintLevel(10);
NumAggregates = ML_Aggregate_Coarsen(MLAggr, TMT_ML, &P, ml_comm_);
ML_Set_PrintLevel(printlevel);
if (NumAggregates == 0){
cerr << "Found 0 aggregates, perhaps the problem is too small." << endl;
ML_CHK_ERR(-2);
}/*end if*/
else if(very_verbose_) printf("[%d] FMFP: %d aggregates created invec_leng=%d\n",Comm_->MyPID(),NumAggregates,P->invec_leng);
int globalAggs;
Comm_->SumAll(&NumAggregates,&globalAggs,1);
if( verbose_ && !Comm_->MyPID()) {
std::cout << PrintMsg_ << "Aggregation threshold = " << Threshold << std::endl;
std::cout << PrintMsg_ << "Global aggregates = " << globalAggs << std::endl;
//ML_Aggregate_Print_Complexity(MLAggr);
}
if(P==0) {fprintf(stderr,"%s","ERROR: No tentative prolongator found\n");ML_CHK_ERR(-5);}
return 0;
}
int main(int argc, char *argv[])
{
int Nnodes=16*16; /* Total number of nodes in the problem.*/
/* 'Nnodes' must be a perfect square. */
int MaxMgLevels=6; /* Maximum number of Multigrid Levels */
int Nits_per_presmooth=1; /* # of pre & post smoothings per level */
double tolerance = 1.0e-8; /* At convergence: */
/* ||r_k||_2 < tolerance ||r_0||_2 */
int smoothPe_flag = ML_YES; /* ML_YES: smooth tentative prolongator */
/* ML_NO: don't smooth prolongator */
/***************************************************************************/
/* Select Hiptmair relaxation subsmoothers for the nodal and edge problems */
/* Choices include */
/* 1) ML_Gen_Smoother_SymGaussSeidel: this corresponds to a processor */
/* local version of symmetric Gauss-Seidel/SOR. The number of sweeps */
/* can be set via either 'edge_its' or 'nodal_its'. The damping can */
/* be set via 'edge_omega' or 'nodal_omega'. When set to ML_DDEFAULT, */
/* the damping is set to '1' on one processor. On multiple processors */
/* a lower damping value is set. This is needed to converge processor */
/* local SOR. */
/* 2) ML_Gen_Smoother_Cheby: this corresponds to polynomial relaxation. */
/* The degree of the polynomial is set via 'edge_its' or 'nodal_its'. */
/* If the degree is '-1', Marian Brezina's MLS polynomial is chosen. */
/* Otherwise, a Chebyshev polynomial is used over high frequencies */
/* [ lambda_max/alpha , lambda_max]. Lambda_max is computed. 'alpha' */
/* is hardwired in this example to correspond to twice the ratio of */
/* unknowns in the fine and coarse meshes. */
/* */
/* Using 'hiptmair_type' (see comments below) it is also possible to choose*/
/* when edge and nodal problems are relaxed within the Hiptmair smoother. */
/***************************************************************************/
void *edge_smoother=(void *) /* Edge relaxation: */
ML_Gen_Smoother_Cheby; /* ML_Gen_Smoother_Cheby */
/* ML_Gen_Smoother_SymGaussSeidel */
void *nodal_smoother=(void *) /* Nodal relaxation */
ML_Gen_Smoother_Cheby;/* ML_Gen_Smoother_Cheby */
/* ML_Gen_Smoother_SymGaussSeidel */
int edge_its = 3; /* Iterations or polynomial degree for */
int nodal_its = 3; /* edge/nodal subsmoothers. */
double nodal_omega = ML_DDEFAULT, /* SOR damping parameter for noda/edge */
edge_omega = ML_DDEFAULT; /* subsmoothers (see comments above). */
int hiptmair_type=HALF_HIPTMAIR;/* FULL_HIPTMAIR: each invokation */
/* smoothes on edges, then nodes, */
/* and then once again on edges. */
/* HALF_HIPTMAIR: each pre-invokation */
/* smoothes on edges, then nodes. */
/* Each post-invokation smoothes */
/* on nodes then edges. . */
ML_Operator *Tmat, *Tmat_trans, **Tmat_array, **Tmat_trans_array;
ML *ml_edges, *ml_nodes;
ML_Aggregate *ag;
int Nfine_edge, Ncoarse_edge, Nfine_node, Ncoarse_node, Nlevels;
int level, coarsest_level, itmp;
double edge_coarsening_rate, node_coarsening_rate, *rhs, *xxx;
void **edge_args, **nodal_args;
struct user_partition Edge_Partition = {NULL, NULL,0,0},
Node_Partition = {NULL, NULL,0,0};
struct Tmat_data Tmat_data;
int i, Ntotal;
ML_Comm *comm;
/* See Aztec User's Guide for information on these variables */
#ifdef AZTEC
AZ_MATRIX *Ke_mat, *Kn_mat;
AZ_PRECOND *Pmat = NULL;
int proc_config[AZ_PROC_SIZE], options[AZ_OPTIONS_SIZE];
double params[AZ_PARAMS_SIZE], status[AZ_STATUS_SIZE];
#endif
/* get processor information (proc id & # of procs) and set ML's printlevel. */
#ifdef ML_MPI
MPI_Init(&argc,&argv);
#endif
#ifdef AZTEC
AZ_set_proc_config(proc_config, COMMUNICATOR);
#endif
ML_Set_PrintLevel(10); /* set ML's output level: 0 gives least output */
/* Set the # of global nodes/edges and partition both the edges and the */
/* nodes over the processors. NOTE: I believe we assume that if an edge */
/* is assigned to a processor at least one of its nodes must be also */
/* assigned to that processor. */
Node_Partition.Nglobal = Nnodes;
Edge_Partition.Nglobal = Node_Partition.Nglobal*2;
Node_Partition.type = NODE;
Edge_Partition.type = EDGE;
#define perxodic
#ifdef periodic
Node_Partition.Nglobal += 2;
#endif
partition_edges(&Edge_Partition);
partition_nodes(&Node_Partition);
xxx = (double *) ML_allocate((Edge_Partition.Nlocal+100)*sizeof(double));
rhs = (double *) ML_allocate((Edge_Partition.Nlocal+100)*sizeof(double));
for (i = 0; i < Edge_Partition.Nlocal + 100; i++) xxx[i] = -1.;
for (i = 0; i < Edge_Partition.Nlocal; i++) xxx[i] = (double)
Edge_Partition.my_global_ids[i];
update_ghost_edges(xxx, (void *) &Edge_Partition);
/* Create an empty multigrid hierarchy and set the 'MaxMGLevels-1'th */
/* level discretization within this hierarchy to the ML matrix */
/* representing Ke (Maxwell edge discretization). */
ML_Create(&ml_edges, MaxMgLevels);
#ifdef AZTEC
/* Build Ke as an Aztec matrix. Use built-in function AZ_ML_Set_Amat() */
/* to convert to an ML matrix and put in hierarchy. */
Ke_mat = user_Ke_build(&Edge_Partition);
AZ_ML_Set_Amat(ml_edges, MaxMgLevels-1, Edge_Partition.Nlocal,
Edge_Partition.Nlocal, Ke_mat, proc_config);
#else
/* Build Ke directly as an ML matrix. */
ML_Init_Amatrix (ml_edges, MaxMgLevels-1, Edge_Partition.Nlocal,
Edge_Partition.Nlocal, &Edge_Partition);
Ntotal = Edge_Partition.Nlocal;
if (Edge_Partition.nprocs == 2) Ntotal += Edge_Partition.Nghost;
ML_Set_Amatrix_Getrow(ml_edges, MaxMgLevels-1, Ke_getrow, update_ghost_edges, Ntotal);
ML_Set_Amatrix_Matvec(ml_edges, MaxMgLevels-1, Ke_matvec);
#endif
/* Build an Aztec matrix representing an auxiliary nodal PDE problem. */
/* This should be a variable coefficient Poisson problem (with unknowns*/
/* at the nodes). The coefficients should be chosen to reflect the */
/* conductivity of the original edge problems. */
/* Create an empty multigrid hierarchy. Convert the Aztec matrix to an */
/* ML matrix and put it in the 'MaxMGLevels-1' level of the hierarchy. */
/* Note it is possible to multiply T'*T for get this matrix though this*/
/* will not incorporate material properties. */
ML_Create(&ml_nodes, MaxMgLevels);
#ifdef AZTEC
Kn_mat = user_Kn_build( &Node_Partition);
AZ_ML_Set_Amat(ml_nodes, MaxMgLevels-1, Node_Partition.Nlocal,
Node_Partition.Nlocal, Kn_mat, proc_config);
#else
ML_Init_Amatrix (ml_nodes, MaxMgLevels-1 , Node_Partition.Nlocal,
Node_Partition.Nlocal, &Node_Partition);
Ntotal = Node_Partition.Nlocal;
if (Node_Partition.nprocs == 2) Ntotal += Node_Partition.Nghost;
ML_Set_Amatrix_Getrow(ml_nodes, MaxMgLevels-1, Kn_getrow, update_ghost_nodes, Ntotal);
#endif
/* Build an ML matrix representing the null space of the PDE problem. */
/* This should be a discrete gradient (nodes to edges). */
#ifdef AZTEC
Tmat = user_T_build (&Edge_Partition, &Node_Partition,
&(ml_nodes->Amat[MaxMgLevels-1]));
#else
Tmat = ML_Operator_Create(ml_nodes->comm);
Tmat_data.edge = &Edge_Partition;
Tmat_data.node = &Node_Partition;
Tmat_data.Kn = &(ml_nodes->Amat[MaxMgLevels-1]);
ML_Operator_Set_ApplyFuncData( Tmat, Node_Partition.Nlocal,
Edge_Partition.Nlocal, ML_EMPTY, (void *) &Tmat_data,
Edge_Partition.Nlocal, NULL, 0);
ML_Operator_Set_Getrow( Tmat, ML_INTERNAL, Edge_Partition.Nlocal,Tmat_getrow);
ML_Operator_Set_ApplyFunc(Tmat, ML_INTERNAL, Tmat_matvec);
ML_Comm_Create( &comm);
ML_CommInfoOP_Generate( &(Tmat->getrow->pre_comm), update_ghost_nodes,
&Node_Partition,comm, Tmat->invec_leng,
Node_Partition.Nghost);
#endif
/********************************************************************/
/* Set some ML parameters. */
/*------------------------------------------------------------------*/
ML_Set_ResidualOutputFrequency(ml_edges, 1);
ML_Set_Tolerance(ml_edges, 1.0e-8);
ML_Aggregate_Create( &ag );
ML_Aggregate_Set_CoarsenScheme_Uncoupled(ag);
ML_Aggregate_Set_DampingFactor(ag, 0.0); /* must use 0 for maxwell */
ML_Aggregate_Set_MaxCoarseSize(ag, 30);
ML_Aggregate_Set_Threshold(ag, 0.0);
/********************************************************************/
/* Set up Tmat_trans */
/*------------------------------------------------------------------*/
Tmat_trans = ML_Operator_Create(ml_edges->comm);
ML_Operator_Transpose_byrow(Tmat, Tmat_trans);
Nlevels=ML_Gen_MGHierarchy_UsingReitzinger(ml_edges, &ml_nodes,MaxMgLevels-1,
ML_DECREASING,ag,Tmat,Tmat_trans,
&Tmat_array,&Tmat_trans_array,
smoothPe_flag, 1.5);
/* Set the Hiptmair subsmoothers */
if (nodal_smoother == (void *) ML_Gen_Smoother_SymGaussSeidel) {
nodal_args = ML_Smoother_Arglist_Create(2);
ML_Smoother_Arglist_Set(nodal_args, 0, &nodal_its);
ML_Smoother_Arglist_Set(nodal_args, 1, &nodal_omega);
}
if (edge_smoother == (void *) ML_Gen_Smoother_SymGaussSeidel) {
edge_args = ML_Smoother_Arglist_Create(2);
ML_Smoother_Arglist_Set(edge_args, 0, &edge_its);
ML_Smoother_Arglist_Set(edge_args, 1, &edge_omega);
}
if (nodal_smoother == (void *) ML_Gen_Smoother_Cheby) {
nodal_args = ML_Smoother_Arglist_Create(2);
ML_Smoother_Arglist_Set(nodal_args, 0, &nodal_its);
Nfine_node = Tmat_array[MaxMgLevels-1]->invec_leng;
Nfine_node = ML_gsum_int(Nfine_node, ml_edges->comm);
}
if (edge_smoother == (void *) ML_Gen_Smoother_Cheby) {
edge_args = ML_Smoother_Arglist_Create(2);
ML_Smoother_Arglist_Set(edge_args, 0, &edge_its);
Nfine_edge = Tmat_array[MaxMgLevels-1]->outvec_leng;
Nfine_edge = ML_gsum_int(Nfine_edge, ml_edges->comm);
}
/****************************************************
* Set up smoothers for all levels but the coarsest. *
****************************************************/
coarsest_level = MaxMgLevels - Nlevels;
for (level = MaxMgLevels-1; level > coarsest_level; level--)
{
if (edge_smoother == (void *) ML_Gen_Smoother_Cheby) {
Ncoarse_edge = Tmat_array[level-1]->outvec_leng;
Ncoarse_edge = ML_gsum_int(Ncoarse_edge, ml_edges->comm);
edge_coarsening_rate = 2.*((double) Nfine_edge)/ ((double) Ncoarse_edge);
ML_Smoother_Arglist_Set(edge_args, 1, &edge_coarsening_rate);
Nfine_edge = Ncoarse_edge;
}
if (nodal_smoother == (void *) ML_Gen_Smoother_Cheby) {
Ncoarse_node = Tmat_array[level-1]->invec_leng;
Ncoarse_node = ML_gsum_int(Ncoarse_node, ml_edges->comm);
node_coarsening_rate = 2.*((double) Nfine_node)/ ((double) Ncoarse_node);
ML_Smoother_Arglist_Set(nodal_args, 1, &node_coarsening_rate);
Nfine_node = Ncoarse_node;
}
ML_Gen_Smoother_Hiptmair(ml_edges, level, ML_BOTH, Nits_per_presmooth,
Tmat_array, Tmat_trans_array, NULL, edge_smoother,
edge_args, nodal_smoother,nodal_args, hiptmair_type);
}
/*******************************************
* Set up coarsest level smoother
*******************************************/
if (edge_smoother == (void *) ML_Gen_Smoother_Cheby) {
edge_coarsening_rate = (double) Nfine_edge;
ML_Smoother_Arglist_Set(edge_args, 1, &edge_coarsening_rate);
}
if (nodal_smoother == (void *) ML_Gen_Smoother_Cheby) {
node_coarsening_rate = (double) Nfine_node;
ML_Smoother_Arglist_Set(nodal_args,1,&node_coarsening_rate);
}
ML_Gen_CoarseSolverSuperLU( ml_edges, coarsest_level);
/* Must be called before invoking the preconditioner */
ML_Gen_Solver(ml_edges, ML_MGV, MaxMgLevels-1, coarsest_level);
/* Set the initial guess and the right hand side. Invoke solver */
xxx = (double *) ML_allocate(Edge_Partition.Nlocal*sizeof(double));
ML_random_vec(xxx, Edge_Partition.Nlocal, ml_edges->comm);
rhs = (double *) ML_allocate(Edge_Partition.Nlocal*sizeof(double));
ML_random_vec(rhs, Edge_Partition.Nlocal, ml_edges->comm);
#ifdef AZTEC
/* Choose the Aztec solver and criteria. Also tell Aztec that */
/* ML will be supplying the preconditioner. */
AZ_defaults(options, params);
options[AZ_solver] = AZ_fixed_pt;
options[AZ_solver] = AZ_gmres;
options[AZ_kspace] = 80;
params[AZ_tol] = tolerance;
AZ_set_ML_preconditioner(&Pmat, Ke_mat, ml_edges, options);
options[AZ_conv] = AZ_noscaled;
AZ_iterate(xxx, rhs, options, params, status, proc_config, Ke_mat, Pmat, NULL);
#else
ML_Iterate(ml_edges, xxx, rhs);
#endif
/* clean up. */
ML_Smoother_Arglist_Delete(&nodal_args);
ML_Smoother_Arglist_Delete(&edge_args);
ML_Aggregate_Destroy(&ag);
ML_Destroy(&ml_edges);
ML_Destroy(&ml_nodes);
#ifdef AZTEC
AZ_free((void *) Ke_mat->data_org);
AZ_free((void *) Ke_mat->val);
AZ_free((void *) Ke_mat->bindx);
if (Ke_mat != NULL) AZ_matrix_destroy(&Ke_mat);
if (Pmat != NULL) AZ_precond_destroy(&Pmat);
if (Kn_mat != NULL) AZ_matrix_destroy(&Kn_mat);
#endif
free(xxx);
free(rhs);
ML_Operator_Destroy(&Tmat);
ML_Operator_Destroy(&Tmat_trans);
ML_MGHierarchy_ReitzingerDestroy(MaxMgLevels-2, &Tmat_array, &Tmat_trans_array);
#ifdef ML_MPI
MPI_Finalize();
#endif
return 0;
}
int main(int argc, char *argv[])
{
int num_PDE_eqns=1, N_levels=3, nsmooth=2;
int leng, level, N_grid_pts, coarsest_level;
int leng1,leng2;
/* See Aztec User's Guide for more information on the */
/* variables that follow. */
int proc_config[AZ_PROC_SIZE], options[AZ_OPTIONS_SIZE];
double params[AZ_PARAMS_SIZE], status[AZ_STATUS_SIZE];
/* data structure for matrix corresponding to the fine grid */
double *val = NULL, *xxx, *rhs, solve_time, setup_time, start_time;
AZ_MATRIX *Amat;
AZ_PRECOND *Pmat = NULL;
ML *ml;
FILE *fp;
int i, j, Nrigid, *garbage, nblocks=0, *blocks = NULL, *block_pde=NULL;
struct AZ_SCALING *scaling;
ML_Aggregate *ag;
double *mode, *rigid=NULL, alpha;
char filename[80];
int one = 1;
int proc,nprocs;
char pathfilename[100];
#ifdef ML_MPI
MPI_Init(&argc,&argv);
/* get number of processors and the name of this processor */
AZ_set_proc_config(proc_config, MPI_COMM_WORLD);
proc = proc_config[AZ_node];
nprocs = proc_config[AZ_N_procs];
#else
AZ_set_proc_config(proc_config, AZ_NOT_MPI);
proc = 0;
nprocs = 1;
#endif
if (proc_config[AZ_node] == 0) {
sprintf(pathfilename,"%s/inputfile",argv[1]);
ML_Reader_ReadInput(pathfilename, &context);
}
else context = (struct reader_context *) ML_allocate(sizeof(struct reader_context));
AZ_broadcast((char *) context, sizeof(struct reader_context), proc_config,
AZ_PACK);
AZ_broadcast((char *) NULL , 0 , proc_config, AZ_SEND);
N_levels = context->N_levels;
printf("N_levels %d\n",N_levels);
nsmooth = context->nsmooth;
num_PDE_eqns = context->N_dofPerNode;
printf("num_PDE_eqns %d\n",num_PDE_eqns);
ML_Set_PrintLevel(context->output_level);
/* read in the number of matrix equations */
leng = 0;
if (proc_config[AZ_node] == 0) {
sprintf(pathfilename,"%s/data_matrix.txt",argv[1]);
fp=fopen(pathfilename,"r");
if (fp==NULL) {
printf("**ERR** couldn't open file data_matrix.txt\n");
exit(1);
}
fscanf(fp,"%d",&leng);
fclose(fp);
}
leng = AZ_gsum_int(leng, proc_config);
N_grid_pts=leng/num_PDE_eqns;
/* initialize the list of global indices. NOTE: the list of global */
/* indices must be in ascending order so that subsequent calls to */
/* AZ_find_index() will function properly. */
#if 0
if (proc_config[AZ_N_procs] == 1) i = AZ_linear;
else i = AZ_file;
#endif
i = AZ_linear;
/* cannot use AZ_input_update for variable blocks (forgot why, but debugged through it)*/
/* make a linear distribution of the matrix */
/* if the linear distribution does not align with the blocks, */
/* this is corrected in ML_AZ_Reader_ReadVariableBlocks */
leng1 = leng/nprocs;
leng2 = leng-leng1*nprocs;
if (proc >= leng2)
{
leng2 += (proc*leng1);
}
else
{
leng1++;
leng2 = proc*leng1;
}
N_update = leng1;
update = (int*)AZ_allocate((N_update+1)*sizeof(int));
if (update==NULL)
{
(void) fprintf (stderr, "Not enough space to allocate 'update'\n");
fflush(stderr); exit(EXIT_FAILURE);
}
for (i=0; i<N_update; i++) update[i] = i+leng2;
#if 0 /* debug */
printf("proc %d N_update %d\n",proc_config[AZ_node],N_update);
fflush(stdout);
#endif
sprintf(pathfilename,"%s/data_vblocks.txt",argv[1]);
ML_AZ_Reader_ReadVariableBlocks(pathfilename,&nblocks,&blocks,&block_pde,
&N_update,&update,proc_config);
#if 0 /* debug */
printf("proc %d N_update %d\n",proc_config[AZ_node],N_update);
fflush(stdout);
#endif
sprintf(pathfilename,"%s/data_matrix.txt",argv[1]);
AZ_input_msr_matrix(pathfilename,update, &val, &bindx, N_update, proc_config);
/* This code is to fix things up so that we are sure we have */
/* all blocks (including the ghost nodes) the same size. */
/* not sure, whether this is a good idea with variable blocks */
/* the examples inpufiles (see top of this file) don't need it */
/* anyway */
/*
AZ_block_MSR(&bindx, &val, N_update, num_PDE_eqns, update);
*/
AZ_transform_norowreordering(proc_config, &external, bindx, val, update, &update_index,
&extern_index, &data_org, N_update, 0, 0, 0, &cpntr,
AZ_MSR_MATRIX);
Amat = AZ_matrix_create( leng );
AZ_set_MSR(Amat, bindx, val, data_org, 0, NULL, AZ_LOCAL);
Amat->matrix_type = data_org[AZ_matrix_type];
data_org[AZ_N_rows] = data_org[AZ_N_internal] + data_org[AZ_N_border];
start_time = AZ_second();
options[AZ_scaling] = AZ_none;
ML_Create(&ml, N_levels);
/* set up discretization matrix and matrix vector function */
AZ_ML_Set_Amat(ml, 0, N_update, N_update, Amat, proc_config);
ML_Set_ResidualOutputFrequency(ml, context->output);
ML_Set_Tolerance(ml, context->tol);
ML_Aggregate_Create( &ag );
if (ML_strcmp(context->agg_coarsen_scheme,"Mis") == 0) {
ML_Aggregate_Set_CoarsenScheme_MIS(ag);
}
else if (ML_strcmp(context->agg_coarsen_scheme,"Uncoupled") == 0) {
ML_Aggregate_Set_CoarsenScheme_Uncoupled(ag);
}
else if (ML_strcmp(context->agg_coarsen_scheme,"Coupled") == 0) {
ML_Aggregate_Set_CoarsenScheme_Coupled(ag);
}
else if (ML_strcmp(context->agg_coarsen_scheme,"Metis") == 0) {
ML_Aggregate_Set_CoarsenScheme_METIS(ag);
for (i=0; i<N_levels; i++)
ML_Aggregate_Set_NodesPerAggr(ml,ag,i,9);
}
else if (ML_strcmp(context->agg_coarsen_scheme,"VBMetis") == 0) {
/* when no blocks read, use standard metis assuming constant block sizes */
if (!blocks)
ML_Aggregate_Set_CoarsenScheme_METIS(ag);
else {
ML_Aggregate_Set_CoarsenScheme_VBMETIS(ag);
ML_Aggregate_Set_Vblocks_CoarsenScheme_VBMETIS(ag,0,N_levels,nblocks,
blocks,block_pde,N_update);
}
for (i=0; i<N_levels; i++)
ML_Aggregate_Set_NodesPerAggr(ml,ag,i,9);
}
else {
printf("**ERR** ML: Unknown aggregation scheme %s\n",context->agg_coarsen_scheme);
exit(-1);
}
ML_Aggregate_Set_DampingFactor(ag, context->agg_damping);
ML_Aggregate_Set_MaxCoarseSize( ag, context->maxcoarsesize);
ML_Aggregate_Set_Threshold(ag, context->agg_thresh);
if (ML_strcmp(context->agg_spectral_norm,"Calc") == 0) {
ML_Set_SpectralNormScheme_Calc(ml);
}
else if (ML_strcmp(context->agg_spectral_norm,"Anorm") == 0) {
ML_Set_SpectralNormScheme_Anorm(ml);
}
else {
printf("**WRN** ML: Unknown spectral norm scheme %s\n",context->agg_spectral_norm);
}
/* read in the rigid body modes */
Nrigid = 0;
if (proc_config[AZ_node] == 0) {
sprintf(filename,"data_nullsp%d.txt",Nrigid);
sprintf(pathfilename,"%s/%s",argv[1],filename);
while( (fp = fopen(pathfilename,"r")) != NULL) {
fclose(fp);
Nrigid++;
sprintf(filename,"data_nullsp%d.txt",Nrigid);
sprintf(pathfilename,"%s/%s",argv[1],filename);
}
}
Nrigid = AZ_gsum_int(Nrigid,proc_config);
if (Nrigid != 0) {
rigid = (double *) ML_allocate( sizeof(double)*Nrigid*(N_update+1) );
if (rigid == NULL) {
printf("Error: Not enough space for rigid body modes\n");
}
}
/* Set rhs */
sprintf(pathfilename,"%s/data_rhs.txt",argv[1]);
fp = fopen(pathfilename,"r");
if (fp == NULL) {
rhs=(double *)ML_allocate(leng*sizeof(double));
if (proc_config[AZ_node] == 0) printf("taking linear vector for rhs\n");
for (i = 0; i < N_update; i++) rhs[i] = (double) update[i];
}
else {
fclose(fp);
if (proc_config[AZ_node] == 0) printf("reading rhs from a file\n");
AZ_input_msr_matrix(pathfilename, update, &rhs, &garbage, N_update,
proc_config);
}
AZ_reorder_vec(rhs, data_org, update_index, NULL);
for (i = 0; i < Nrigid; i++) {
sprintf(filename,"data_nullsp%d.txt",i);
sprintf(pathfilename,"%s/%s",argv[1],filename);
AZ_input_msr_matrix(pathfilename, update, &mode, &garbage, N_update,
proc_config);
AZ_reorder_vec(mode, data_org, update_index, NULL);
#if 0 /* test the given rigid body mode, output-vector should be ~0 */
Amat->matvec(mode, rigid, Amat, proc_config);
for (j = 0; j < N_update; j++) printf("this is %d %e\n",j,rigid[j]);
#endif
for (j = 0; j < i; j++) {
alpha = -AZ_gdot(N_update, mode, &(rigid[j*N_update]), proc_config)/
AZ_gdot(N_update, &(rigid[j*N_update]), &(rigid[j*N_update]),
proc_config);
DAXPY_F77(&N_update, &alpha, &(rigid[j*N_update]), &one, mode, &one);
}
/* rhs orthogonalization */
alpha = -AZ_gdot(N_update, mode, rhs, proc_config)/
AZ_gdot(N_update, mode, mode, proc_config);
DAXPY_F77(&N_update, &alpha, mode, &one, rhs, &one);
for (j = 0; j < N_update; j++) rigid[i*N_update+j] = mode[j];
free(mode);
free(garbage);
}
for (j = 0; j < Nrigid; j++) {
alpha = -AZ_gdot(N_update, rhs, &(rigid[j*N_update]), proc_config)/
AZ_gdot(N_update, &(rigid[j*N_update]), &(rigid[j*N_update]),
proc_config);
DAXPY_F77(&N_update, &alpha, &(rigid[j*N_update]), &one, rhs, &one);
}
#if 0 /* for testing the default nullsp */
ML_Aggregate_Set_NullSpace(ag, num_PDE_eqns, 6, NULL, N_update);
#else
if (Nrigid != 0) {
ML_Aggregate_Set_NullSpace(ag, num_PDE_eqns, Nrigid, rigid, N_update);
}
#endif
if (rigid) ML_free(rigid);
ag->keep_agg_information = 1;
coarsest_level = ML_Gen_MGHierarchy_UsingAggregation(ml, 0,
ML_INCREASING, ag);
coarsest_level--;
if ( proc_config[AZ_node] == 0 )
printf("Coarse level = %d \n", coarsest_level);
#if 0
/* set up smoothers */
if (!blocks)
blocks = (int *) ML_allocate(sizeof(int)*N_update);
#endif
for (level = 0; level < coarsest_level; level++) {
num_PDE_eqns = ml->Amat[level].num_PDEs;
/* Sparse approximate inverse smoother that acutally does both */
/* pre and post smoothing. */
if (ML_strcmp(context->smoother,"Parasails") == 0) {
ML_Gen_Smoother_ParaSails(ml , level, ML_PRESMOOTHER, nsmooth,
parasails_sym, parasails_thresh,
parasails_nlevels, parasails_filter,
(int) parasails_loadbal, parasails_factorized);
}
/* This is the symmetric Gauss-Seidel smoothing that we usually use. */
/* In parallel, it is not a true Gauss-Seidel in that each processor */
/* does a Gauss-Seidel on its local submatrix independent of the */
/* other processors. */
else if (ML_strcmp(context->smoother,"GaussSeidel") == 0) {
ML_Gen_Smoother_GaussSeidel(ml , level, ML_BOTH, nsmooth,1.);
}
else if (ML_strcmp(context->smoother,"SymGaussSeidel") == 0) {
ML_Gen_Smoother_SymGaussSeidel(ml , level, ML_BOTH, nsmooth,1.);
}
else if (ML_strcmp(context->smoother,"Poly") == 0) {
ML_Gen_Smoother_Cheby(ml, level, ML_BOTH, 30., nsmooth);
}
else if (ML_strcmp(context->smoother,"BlockGaussSeidel") == 0) {
ML_Gen_Smoother_BlockGaussSeidel(ml , level, ML_BOTH, nsmooth,1.,
num_PDE_eqns);
}
else if (ML_strcmp(context->smoother,"VBSymGaussSeidel") == 0) {
if (blocks) ML_free(blocks);
if (block_pde) ML_free(block_pde);
blocks = NULL;
block_pde = NULL;
nblocks = 0;
ML_Aggregate_Get_Vblocks_CoarsenScheme_VBMETIS(ag,level,N_levels,&nblocks,
&blocks,&block_pde);
if (blocks==NULL) ML_Gen_Blocks_Aggregates(ag, level, &nblocks, &blocks);
ML_Gen_Smoother_VBlockSymGaussSeidel(ml , level, ML_BOTH, nsmooth,1.,
nblocks, blocks);
}
/* This is a true Gauss Seidel in parallel. This seems to work for */
/* elasticity problems. However, I don't believe that this is very */
/* efficient in parallel. */
/*
nblocks = ml->Amat[level].invec_leng;
for (i =0; i < nblocks; i++) blocks[i] = i;
ML_Gen_Smoother_VBlockSymGaussSeidelSequential(ml , level, ML_PRESMOOTHER,
nsmooth, 1., nblocks, blocks);
ML_Gen_Smoother_VBlockSymGaussSeidelSequential(ml, level, ML_POSTSMOOTHER,
nsmooth, 1., nblocks, blocks);
*/
/* Jacobi Smoothing */
else if (ML_strcmp(context->smoother,"Jacobi") == 0) {
ML_Gen_Smoother_Jacobi(ml , level, ML_PRESMOOTHER, nsmooth,.4);
ML_Gen_Smoother_Jacobi(ml , level, ML_POSTSMOOTHER, nsmooth,.4);
}
/* This does a block Gauss-Seidel (not true GS in parallel) */
/* where each processor has 'nblocks' blocks. */
/* */
else if (ML_strcmp(context->smoother,"Metis") == 0) {
if (blocks) ML_free(blocks);
if (block_pde) ML_free(block_pde);
nblocks = 250;
ML_Gen_Blocks_Metis(ml, level, &nblocks, &blocks);
ML_Gen_Smoother_VBlockSymGaussSeidel(ml , level, ML_BOTH, nsmooth,1.,
nblocks, blocks);
}
else {
printf("unknown smoother %s\n",context->smoother);
exit(1);
}
}
/* set coarse level solver */
nsmooth = context->coarse_its;
/* Sparse approximate inverse smoother that acutally does both */
/* pre and post smoothing. */
if (ML_strcmp(context->coarse_solve,"Parasails") == 0) {
ML_Gen_Smoother_ParaSails(ml , coarsest_level, ML_PRESMOOTHER, nsmooth,
parasails_sym, parasails_thresh,
parasails_nlevels, parasails_filter,
(int) parasails_loadbal, parasails_factorized);
}
else if (ML_strcmp(context->coarse_solve,"GaussSeidel") == 0) {
ML_Gen_Smoother_GaussSeidel(ml , coarsest_level, ML_BOTH, nsmooth,1.);
}
else if (ML_strcmp(context->coarse_solve,"Poly") == 0) {
ML_Gen_Smoother_Cheby(ml, coarsest_level, ML_BOTH, 30., nsmooth);
}
else if (ML_strcmp(context->coarse_solve,"SymGaussSeidel") == 0) {
ML_Gen_Smoother_SymGaussSeidel(ml , coarsest_level, ML_BOTH, nsmooth,1.);
}
else if (ML_strcmp(context->coarse_solve,"BlockGaussSeidel") == 0) {
ML_Gen_Smoother_BlockGaussSeidel(ml, coarsest_level, ML_BOTH, nsmooth,1.,
num_PDE_eqns);
}
else if (ML_strcmp(context->coarse_solve,"Aggregate") == 0) {
if (blocks) ML_free(blocks);
if (block_pde) ML_free(block_pde);
ML_Gen_Blocks_Aggregates(ag, coarsest_level, &nblocks, &blocks);
ML_Gen_Smoother_VBlockSymGaussSeidel(ml , coarsest_level, ML_BOTH,
nsmooth,1., nblocks, blocks);
}
else if (ML_strcmp(context->coarse_solve,"Jacobi") == 0) {
ML_Gen_Smoother_Jacobi(ml , coarsest_level, ML_BOTH, nsmooth,.5);
}
else if (ML_strcmp(context->coarse_solve,"Metis") == 0) {
if (blocks) ML_free(blocks);
if (block_pde) ML_free(block_pde);
nblocks = 250;
ML_Gen_Blocks_Metis(ml, coarsest_level, &nblocks, &blocks);
ML_Gen_Smoother_VBlockSymGaussSeidel(ml , coarsest_level, ML_BOTH,
nsmooth,1., nblocks, blocks);
}
else if (ML_strcmp(context->coarse_solve,"SuperLU") == 0) {
ML_Gen_CoarseSolverSuperLU( ml, coarsest_level);
}
else if (ML_strcmp(context->coarse_solve,"Amesos") == 0) {
ML_Gen_Smoother_Amesos(ml,coarsest_level,ML_AMESOS_KLU,-1, 0.0);
}
else {
printf("unknown coarse grid solver %s\n",context->coarse_solve);
exit(1);
}
ML_Gen_Solver(ml, ML_MGV, 0, coarsest_level);
AZ_defaults(options, params);
if (ML_strcmp(context->krylov,"Cg") == 0) {
options[AZ_solver] = AZ_cg;
}
else if (ML_strcmp(context->krylov,"Bicgstab") == 0) {
options[AZ_solver] = AZ_bicgstab;
}
else if (ML_strcmp(context->krylov,"Tfqmr") == 0) {
options[AZ_solver] = AZ_tfqmr;
}
else if (ML_strcmp(context->krylov,"Gmres") == 0) {
options[AZ_solver] = AZ_gmres;
}
else {
printf("unknown krylov method %s\n",context->krylov);
}
if (blocks) ML_free(blocks);
if (block_pde) ML_free(block_pde);
options[AZ_scaling] = AZ_none;
options[AZ_precond] = AZ_user_precond;
options[AZ_conv] = AZ_r0;
options[AZ_output] = 1;
options[AZ_max_iter] = context->max_outer_its;
options[AZ_poly_ord] = 5;
options[AZ_kspace] = 130;
params[AZ_tol] = context->tol;
options[AZ_output] = context->output;
ML_free(context);
AZ_set_ML_preconditioner(&Pmat, Amat, ml, options);
setup_time = AZ_second() - start_time;
xxx = (double *) malloc( leng*sizeof(double));
for (iii = 0; iii < leng; iii++) xxx[iii] = 0.0;
/* Set x */
/*
there is no initguess supplied with these examples for the moment....
*/
fp = fopen("initguessfile","r");
if (fp != NULL) {
fclose(fp);
if (proc_config[AZ_node]== 0) printf("reading initial guess from file\n");
AZ_input_msr_matrix("data_initguess.txt", update, &xxx, &garbage, N_update,
proc_config);
options[AZ_conv] = AZ_expected_values;
}
else if (proc_config[AZ_node]== 0) printf("taking 0 initial guess \n");
AZ_reorder_vec(xxx, data_org, update_index, NULL);
/* if Dirichlet BC ... put the answer in */
for (i = 0; i < data_org[AZ_N_internal]+data_org[AZ_N_border]; i++) {
if ( (val[i] > .99999999) && (val[i] < 1.0000001))
xxx[i] = rhs[i];
}
fp = fopen("AZ_no_multilevel.dat","r");
scaling = AZ_scaling_create();
start_time = AZ_second();
if (fp != NULL) {
fclose(fp);
options[AZ_precond] = AZ_none;
options[AZ_scaling] = AZ_sym_diag;
options[AZ_ignore_scaling] = AZ_TRUE;
options[AZ_keep_info] = 1;
AZ_iterate(xxx, rhs, options, params, status, proc_config, Amat, NULL, scaling);
/*
options[AZ_pre_calc] = AZ_reuse;
options[AZ_conv] = AZ_expected_values;
if (proc_config[AZ_node] == 0)
printf("\n-------- Second solve with improved convergence test -----\n");
AZ_iterate(xxx, rhs, options, params, status, proc_config, Amat, NULL, scaling);
if (proc_config[AZ_node] == 0)
printf("\n-------- Third solve with improved convergence test -----\n");
AZ_iterate(xxx, rhs, options, params, status, proc_config, Amat, NULL, scaling);
*/
}
else {
options[AZ_keep_info] = 1;
AZ_iterate(xxx, rhs, options, params, status, proc_config, Amat, Pmat, scaling);
options[AZ_pre_calc] = AZ_reuse;
options[AZ_conv] = AZ_expected_values;
/*
if (proc_config[AZ_node] == 0)
printf("\n-------- Second solve with improved convergence test -----\n");
AZ_iterate(xxx, rhs, options, params, status, proc_config, Amat, Pmat, scaling);
if (proc_config[AZ_node] == 0)
printf("\n-------- Third solve with improved convergence test -----\n");
AZ_iterate(xxx, rhs, options, params, status, proc_config, Amat, Pmat, scaling);
*/
}
solve_time = AZ_second() - start_time;
if (proc_config[AZ_node] == 0)
printf("Solve time = %e, MG Setup time = %e\n", solve_time, setup_time);
if (proc_config[AZ_node] == 0)
printf("Printing out a few entries of the solution ...\n");
for (j=0;j<Amat->data_org[AZ_N_internal]+ Amat->data_org[AZ_N_border];j++)
if (update[j] == 7) {printf("solution(gid = %d) = %10.4e\n",
update[j],xxx[update_index[j]]); fflush(stdout);}
j = AZ_gsum_int(7, proc_config); /* sync processors */
for (j=0;j<Amat->data_org[AZ_N_internal]+ Amat->data_org[AZ_N_border];j++)
if (update[j] == 23) {printf("solution(gid = %d) = %10.4e\n",
update[j],xxx[update_index[j]]); fflush(stdout);}
j = AZ_gsum_int(7, proc_config); /* sync processors */
for (j=0;j<Amat->data_org[AZ_N_internal]+ Amat->data_org[AZ_N_border];j++)
if (update[j] == 47) {printf("solution(gid = %d) = %10.4e\n",
update[j],xxx[update_index[j]]); fflush(stdout);}
j = AZ_gsum_int(7, proc_config); /* sync processors */
for (j=0;j<Amat->data_org[AZ_N_internal]+ Amat->data_org[AZ_N_border];j++)
if (update[j] == 101) {printf("solution(gid = %d) = %10.4e\n",
update[j],xxx[update_index[j]]); fflush(stdout);}
j = AZ_gsum_int(7, proc_config); /* sync processors */
for (j=0;j<Amat->data_org[AZ_N_internal]+ Amat->data_org[AZ_N_border];j++)
if (update[j] == 171) {printf("solution(gid = %d) = %10.4e\n",
update[j],xxx[update_index[j]]); fflush(stdout);}
ML_Aggregate_Destroy(&ag);
ML_Destroy(&ml);
AZ_free((void *) Amat->data_org);
AZ_free((void *) Amat->val);
AZ_free((void *) Amat->bindx);
AZ_free((void *) update);
AZ_free((void *) external);
AZ_free((void *) extern_index);
AZ_free((void *) update_index);
AZ_scaling_destroy(&scaling);
if (Amat != NULL) AZ_matrix_destroy(&Amat);
if (Pmat != NULL) AZ_precond_destroy(&Pmat);
free(xxx);
free(rhs);
#ifdef ML_MPI
MPI_Finalize();
#endif
return 0;
}
// ================================================ ====== ==== ==== == =
int ML_Epetra::RefMaxwell_Aggregate_Nodes(const Epetra_CrsMatrix & A, Teuchos::ParameterList & List, ML_Comm * ml_comm, std::string PrintMsg,
ML_Aggregate_Struct *& MLAggr,ML_Operator *&P, int &NumAggregates){
/* Output level */
bool verbose, very_verbose;
int OutputLevel = List.get("ML output", -47);
if(OutputLevel == -47) OutputLevel = List.get("output", 1);
if(OutputLevel>=15) very_verbose=verbose=true;
if(OutputLevel > 5) {very_verbose=false;verbose=true;}
else very_verbose=verbose=false;
/* Wrap A in a ML_Operator */
ML_Operator* A_ML = ML_Operator_Create(ml_comm);
ML_Operator_WrapEpetraCrsMatrix(const_cast<Epetra_CrsMatrix*>(&A),A_ML);
/* Pull Teuchos Options */
std::string CoarsenType = List.get("aggregation: type", "Uncoupled");
double Threshold = List.get("aggregation: threshold", 0.0);
int NodesPerAggr = List.get("aggregation: nodes per aggregate",
ML_Aggregate_Get_OptimalNumberOfNodesPerAggregate());
bool UseAux = List.get("aggregation: aux: enable",false);
double AuxThreshold = List.get("aggregation: aux: threshold",0.0);
int MaxAuxLevels = List.get("aggregation: aux: max levels",10);
ML_Aggregate_Create(&MLAggr);
ML_Aggregate_Set_MaxLevels(MLAggr, 2);
ML_Aggregate_Set_StartLevel(MLAggr, 0);
ML_Aggregate_Set_Threshold(MLAggr, Threshold);
ML_Aggregate_Set_MaxCoarseSize(MLAggr,1);
MLAggr->cur_level = 0;
ML_Aggregate_Set_Reuse(MLAggr);
MLAggr->keep_agg_information = 1;
P = ML_Operator_Create(ml_comm);
/* Process Teuchos Options */
if (CoarsenType == "Uncoupled")
ML_Aggregate_Set_CoarsenScheme_Uncoupled(MLAggr);
else if (CoarsenType == "Uncoupled-MIS"){
ML_Aggregate_Set_CoarsenScheme_UncoupledMIS(MLAggr);
}
else if (CoarsenType == "METIS"){
ML_Aggregate_Set_CoarsenScheme_METIS(MLAggr);
ML_Aggregate_Set_NodesPerAggr(0, MLAggr, 0, NodesPerAggr);
}/*end if*/
else {
if(!A.Comm().MyPID()) printf("%s Unsupported (1,1) block aggregation type(%s), resetting to uncoupled-mis\n",PrintMsg.c_str(),CoarsenType.c_str());
ML_Aggregate_Set_CoarsenScheme_UncoupledMIS(MLAggr);
}
/* Setup Aux Data */
if(UseAux) {
A_ML->aux_data->enable=1;
A_ML->aux_data->threshold=AuxThreshold;
A_ML->aux_data->max_level=MaxAuxLevels;
ML_Init_Aux(A_ML,List);
if(verbose && !A.Comm().MyPID()) {
printf("%s Using auxiliary matrix\n",PrintMsg.c_str());
printf("%s aux threshold = %e\n",PrintMsg.c_str(),A_ML->aux_data->threshold);
}
}
/* Aggregate Nodes */
int printlevel=ML_Get_PrintLevel();
if(verbose) ML_Set_PrintLevel(10);
NumAggregates = ML_Aggregate_Coarsen(MLAggr,A_ML, &P, ml_comm);
if(verbose) ML_Set_PrintLevel(printlevel);
if (NumAggregates == 0){
std::cerr << "Found 0 aggregates, perhaps the problem is too small." << std::endl;
ML_CHK_ERR(-2);
}/*end if*/
else if(very_verbose) printf("[%d] %s %d aggregates created invec_leng=%d\n",A.Comm().MyPID(),PrintMsg.c_str(),NumAggregates,P->invec_leng);
if(verbose){
int globalAggs=0;
A.Comm().SumAll(&NumAggregates,&globalAggs,1);
if(!A.Comm().MyPID()) {
printf("%s Aggregation threshold = %e\n",PrintMsg.c_str(),Threshold);
printf("%s Global aggregates = %d\n",PrintMsg.c_str(),globalAggs);
}
}
/* Cleanup */
ML_qr_fix_Destroy();
if(UseAux) ML_Finalize_Aux(A_ML);
ML_Operator_Destroy(&A_ML);
return 0;
}
/*----------------------------------------------------------------------*
| Constructor (public) m.gee 01/05|
| IMPORTANT: |
| No matter on which level we are here, the vector xfine is ALWAYS |
| a fine grid vector here! |
| this is the constructor for the ismatrixfree==false case
*----------------------------------------------------------------------*/
ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel(
int level, int nlevel, int printlevel, ML* ml,
ML_Aggregate* ag,Epetra_CrsMatrix** P,
ML_NOX::Ml_Nox_Fineinterface& interface,
const Epetra_Comm& comm, const Epetra_Vector& xfine,
bool ismatrixfree, bool matfreelev0, bool isnlnCG,
int nitersCG, bool broyden, Epetra_CrsMatrix* Jac,
string fsmoothertype, string smoothertype,
string coarsesolvetype,
int nsmooth_fine, int nsmooth, int nsmooth_coarse,
double conv_normF, double conv_nupdate,
int conv_maxiter,int numPDE, int nullspdim)
: fineinterface_(interface),
comm_(comm)
{
level_ = level; // this level
nlevel_ = nlevel; // number of total levels
ml_printlevel_ = printlevel; // printlevel
ml_ = ml; // the global ML object
ag_ = ag; // the global ML_Aggregate object
thislevel_prec_ = 0; // this level's linear preconditioner
thislevel_ml_ = 0; // this level's local ML object
thislevel_ag_ = 0; // this level's local ML_Aggregate object
coarseinterface_ = 0; // this level's coarse interface
coarseprepost_ = 0;
xthis_ = 0; // this level's current solution matching this level's map!!!!
thislevel_A_ = 0; // this level's NOX Matrixfree operator
SmootherA_ = 0; // this level's Epetra_CrsMatrix for thislevel_prec_
ismatrixfree_ = ismatrixfree; // matrixfree flag
conv_normF_ = conv_normF; // NOX convergence test stuff
conv_nupdate_ = conv_nupdate;
conv_maxiter_ = conv_maxiter;
absresid_ = 0;
nupdate_ = 0;
fv_ = 0;
maxiters_ = 0;
combo1_ = 0;
combo2_ = 0;
thislevel_linSys_ = 0; // this level's NOX linear system
nlParams_ = 0; // NOX parameters
initialGuess_ = 0; // NOX initial guess
group_ = 0; // NOX group
solver_ = 0; // NOX solver
isnlnCG_ = isnlnCG;
azlinSys_ = 0;
clone_ = 0;
nitersCG_ = nitersCG;
broyden_ = broyden;
Broyd_ = 0;
if (ismatrixfree_==true)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: ismatrixfree_==true on level " << level_ << "\n"
<< "**ERR**: in constructor for ismatrixfree_==false - case\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// ------------------------------------------------------------------------
// get the Jacobian of this level
const Epetra_CrsGraph* graph = 0;
// ------------------------------------------------------------------------
if (level_==0)
{
graph = fineinterface_.getGraph();
// On fine level this is the fineinterface's Jacobian
if (matfreelev0==false)
SmootherA_ = fineinterface_.getJacobian();
else if (matfreelev0==true && Jac)
SmootherA_ = Jac;
else
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: something weired happened\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
}
// ------------------------------------------------------------------------
else
{
// On coarse levels get Jacobian from hierarchy
// Note: On levels>0 SmootherA_ is a real copy of the Jacobian
int maxnnz=0;
double cputime=0.0;
ML_Operator2EpetraCrsMatrix(&(ml_->Amat[level_]), SmootherA_, maxnnz,
false, cputime);
SmootherA_->OptimizeStorage();
graph = &(SmootherA_->Graph());
}
// just to be save
if (!SmootherA_ || !graph)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: Smoother==NULL on level " << level_ << "\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// ------------------------------------------------------------------------
// generate this level's coarse interface
coarseinterface_ = new ML_NOX::Nox_CoarseProblem_Interface(
fineinterface_,level_,ml_printlevel_,
P,&(graph->RowMap()),nlevel_);
// ------------------------------------------------------------------------
// generate this level's coarse prepostoperator
if (level_==0)
coarseprepost_ = new ML_NOX::Ml_Nox_CoarsePrePostOperator(*coarseinterface_,
fineinterface_);
// ------------------------------------------------------------------------
// get the current solution to this level
xthis_ = coarseinterface_->restrict_fine_to_this(xfine);
// ------------------------------------------------------------------------
// create this level's preconditioner
// We use a 1-level ML-hierarchy for that
ML_Aggregate_Create(&thislevel_ag_);
ML_Create(&thislevel_ml_,1);
// set the Jacobian on level 0 of the local ml
EpetraMatrix2MLMatrix(thislevel_ml_,0,
(dynamic_cast<Epetra_RowMatrix*>(SmootherA_)));
// construct a 1-level ML-hierarchy on this level as a smoother
ML_Set_PrintLevel(ml_printlevel_);
ML_Aggregate_Set_CoarsenScheme_Uncoupled(thislevel_ag_);
ML_Aggregate_Set_DampingFactor(thislevel_ag_, 0.0);
ML_Aggregate_Set_Threshold(thislevel_ag_, 0.0);
ML_Aggregate_Set_MaxCoarseSize(thislevel_ag_,1);
ML_Aggregate_Set_NullSpace(thislevel_ag_,numPDE,nullspdim,NULL,
SmootherA_->NumMyRows());
int thislevel_nlevel = ML_Gen_MGHierarchy_UsingAggregation(thislevel_ml_,0,
ML_INCREASING,thislevel_ag_);
if (thislevel_nlevel != 1)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: ML generated a local hierarchy of " << thislevel_nlevel << " on level " << level_ << "\n"
<< "**ERR**: this is supposed to be 1 Level only!\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// set the smoother
if (level_==0)
Set_Smoother(ml,ag,level_,nlevel,thislevel_ml_,thislevel_ag_,fsmoothertype,nsmooth_fine);
else if (level_ != nlevel_-1) // set the smoother from the input
Set_Smoother(ml,ag,level_,nlevel,thislevel_ml_,thislevel_ag_,smoothertype,nsmooth);
else // set the coarse solver from the input
Set_Smoother(ml,ag,level_,nlevel,thislevel_ml_,thislevel_ag_,coarsesolvetype,nsmooth_coarse);
// create this level's preconditioner class
ML_Epetra::MultiLevelOperator* ml_tmp = new ML_Epetra::MultiLevelOperator(
thislevel_ml_,comm_,
SmootherA_->OperatorDomainMap(),
SmootherA_->OperatorRangeMap());
thislevel_prec_ = new ML_NOX::ML_Nox_ConstrainedMultiLevelOperator(ml_tmp,*coarseinterface_);
if (!thislevel_prec_)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: thislevel_prec_==NULL on level " << level_ << "\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// ------------------------------------------------------------------------
// set up NOX on this level
// ------------------------------------------------------------------------
nlParams_ = new Teuchos::ParameterList();
Teuchos::ParameterList& printParams = nlParams_->sublist("Printing");
printParams.setParameter("MyPID", comm_.MyPID());
printParams.setParameter("Output Precision", 14);
printParams.setParameter("Output Processor", 0);
if (ml_printlevel_>9)
printParams.setParameter("Output Information",
NOX::Utils::OuterIteration +
NOX::Utils::Warning);
else if (ml_printlevel_>8)
printParams.setParameter("Output Information",
NOX::Utils::Warning);
else
printParams.setParameter("Output Information",0);
if (level_==0)
nlParams_->sublist("Solver Options").setParameter("User Defined Pre/Post Operator", *coarseprepost_);
nlParams_->setParameter("Nonlinear Solver", "Line Search Based");
Teuchos::ParameterList& searchParams = nlParams_->sublist("Line Search");
Teuchos::ParameterList* lsParamsptr = 0;
if (isnlnCG_)
{
searchParams.setParameter("Method", "NonlinearCG");
Teuchos::ParameterList& dirParams = nlParams_->sublist("Direction");
dirParams.setParameter("Method", "NonlinearCG");
Teuchos::ParameterList& nlcgParams = dirParams.sublist("Nonlinear CG");
nlcgParams.setParameter("Restart Frequency", 10);
nlcgParams.setParameter("Precondition", "On");
nlcgParams.setParameter("Orthogonalize", "Polak-Ribiere");
//nlcgParams.setParameter("Orthogonalize", "Fletcher-Reeves");
Teuchos::ParameterList& lsParams = nlcgParams.sublist("Linear Solver");
lsParams.setParameter("Aztec Solver", "CG");
lsParams.setParameter("Max Iterations", 1);
lsParams.setParameter("Tolerance", 1e-11);
lsParams.setParameter("Output Frequency", 0);
lsParams.setParameter("Preconditioning", "User Supplied Preconditioner");
lsParams.setParameter("Preconditioner","User Defined");
}
else // Newton's method using ML-preconditioned Aztec as linear solver
{
searchParams.setParameter("Method", "Full Step");
// Sublist for direction
Teuchos::ParameterList& dirParams = nlParams_->sublist("Direction");
dirParams.setParameter("Method", "Newton");
Teuchos::ParameterList& newtonParams = dirParams.sublist("Newton");
newtonParams.setParameter("Forcing Term Method", "Constant");
//newtonParams.setParameter("Forcing Term Method", "Type 1");
//newtonParams.setParameter("Forcing Term Method", "Type 2");
newtonParams.setParameter("Forcing Term Minimum Tolerance", 1.0e-6);
newtonParams.setParameter("Forcing Term Maximum Tolerance", 0.1);
Teuchos::ParameterList& lsParams = newtonParams.sublist("Linear Solver");
lsParamsptr = &lsParams;
lsParams.setParameter("Size of Krylov Subspace", 100);
lsParams.setParameter("Aztec Solver", "GMRES");
lsParams.setParameter("Max Iterations", nitersCG_);
lsParams.setParameter("Tolerance", conv_normF_); // FIXME? is this correct?
if (ml_printlevel_>8)
lsParams.setParameter("Output Frequency", 50);
else
lsParams.setParameter("Output Frequency", 0);
lsParams.setParameter("Preconditioning", "User Supplied Preconditioner");
lsParams.setParameter("Preconditioner","User Defined");
}
// create the initial guess
initialGuess_ = new NOX::Epetra::Vector(*xthis_, NOX::DeepCopy, true);
// NOTE: do not delete xthis_, it's used and destroyed by initialGuess_
// create the necessary interfaces
NOX::EpetraNew::Interface::Preconditioner* iPrec = 0;
NOX::EpetraNew::Interface::Required* iReq = 0;
NOX::EpetraNew::Interface::Jacobian* iJac = 0;
if (isnlnCG_)
{
// create the matrixfree operator used in the nlnCG
thislevel_A_ = new NOX::EpetraNew::MatrixFree(*coarseinterface_,*xthis_,false);
// create the necessary interfaces
iPrec = 0;
iReq = coarseinterface_;
iJac = thislevel_A_;
// create the linear system
thislevel_linSys_ = new ML_NOX::Ml_Nox_LinearSystem(
*iJac,*thislevel_A_,*iPrec,
coarseinterface_,*thislevel_prec_,
*xthis_,ismatrixfree_,level_,ml_printlevel_);
// create the group
group_ = new NOX::EpetraNew::Group(printParams,*iReq,*initialGuess_,*thislevel_linSys_);
}
else // Modified Newton's method
{
if (!broyden_)
{
// create the necessary interfaces
iPrec = this;
iReq = coarseinterface_;
//iJac = this;
thislevel_A_ = new NOX::EpetraNew::MatrixFree(*coarseinterface_,*xthis_,false);
// create the initial guess vector
//clone_ = new Epetra_Vector(*xthis_);
// create the linear system
//azlinSys_ = new NOX::EpetraNew::LinearSystemAztecOO(
// printParams,*lsParamsptr,
// *iJac,*SmootherA_,*iPrec,
// *thislevel_prec_,*clone_);
azlinSys_ = new NOX::EpetraNew::LinearSystemAztecOO(
printParams,*lsParamsptr,
*thislevel_A_,*thislevel_A_,*iPrec,
*thislevel_prec_,*xthis_);
}
else // use a Broyden update for the Jacobian
{
// create the initial guess vector
//clone_ = new Epetra_Vector(*xthis_);
// create the necessary interfaces
iPrec = this;
iReq = coarseinterface_;
Broyd_ = new NOX::EpetraNew::BroydenOperator(*nlParams_,*xthis_,
*SmootherA_,false);
// create the linear system
azlinSys_ = new NOX::EpetraNew::LinearSystemAztecOO(
printParams,*lsParamsptr,
*Broyd_,*SmootherA_,*iPrec,
*thislevel_prec_,*xthis_);
}
// create the group
group_ = new NOX::EpetraNew::Group(printParams,*iReq,*initialGuess_,
*azlinSys_);
}
// create convergence test
create_Nox_Convergencetest(conv_normF_,conv_nupdate_,conv_maxiter_);
// create the solver
solver_ = new NOX::Solver::Manager(*group_,*combo2_,*nlParams_);
return;
}
/*----------------------------------------------------------------------*
| Constructor (public) m.gee 01/05|
| IMPORTANT: |
| No matter on which level we are here, the vector xfine is ALWAYS |
| a fine grid vector here! |
| this is the constructor for the ismatrixfree==true case
*----------------------------------------------------------------------*/
ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel(
int level, int nlevel, int printlevel, ML* ml,
ML_Aggregate* ag,Epetra_CrsMatrix** P,
ML_NOX::Ml_Nox_Fineinterface& interface,
const Epetra_Comm& comm, const Epetra_Vector& xfine,
bool ismatrixfree, bool isnlnCG, int nitersCG, bool broyden,
string fsmoothertype, string smoothertype, string coarsesolvetype,
int nsmooth_fine, int nsmooth, int nsmooth_coarse,
double conv_normF,
double conv_nupdate, int conv_maxiter,
int numPDE, int nullspdim, Epetra_CrsMatrix* Mat,
ML_NOX::Nox_CoarseProblem_Interface* coarseinterface)
: fineinterface_(interface),
comm_(comm)
{
level_ = level; // this level
nlevel_ = nlevel; // number of total levels
ml_printlevel_ = printlevel; // printlevel
ml_ = ml; // the global ML object
ag_ = ag; // the global ML_Aggregate object
thislevel_prec_ = 0; // this level's linear preconditioner
thislevel_ml_ = 0; // this level's local ML object
thislevel_ag_ = 0; // this level's local ML_Aggregate object
coarseinterface_ = coarseinterface; // this level's coarse interface
coarseprepost_ = 0;
xthis_ = 0; // this level's current solution matching this level's map!!!!
thislevel_A_ = 0; // this level's NOX Matrixfree operator
SmootherA_ = 0; // this level's Epetra_CrsMatrix for thislevel_prec_
ismatrixfree_ = ismatrixfree; // matrixfree flag
conv_normF_ = conv_normF; // NOX convergence test stuff
conv_nupdate_ = conv_nupdate;
conv_maxiter_ = conv_maxiter;
absresid_ = 0;
nupdate_ = 0;
fv_ = 0;
maxiters_ = 0;
combo1_ = 0;
combo2_ = 0;
thislevel_linSys_ = 0; // this level's NOX linear system
nlParams_ = 0; // NOX parameters
initialGuess_ = 0; // NOX initial guess
group_ = 0; // NOX group
solver_ = 0; // NOX solver
SmootherA_ = Mat;
isnlnCG_ = isnlnCG;
azlinSys_ = 0;
clone_ = 0;
nitersCG_ = nitersCG;
broyden_ = broyden;
Broyd_ = 0;
#if 0
if (isnlnCG_==false &&
(fsmoothertype == "Jacobi" ||
smoothertype == "Jacobi" ||
coarsesolvetype == "Jacobi" ))
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: Modified Newton's method not supported for \n"
<< "**ERR**: ismatrixfree_==true && smoothertype == Jacobi-Smoother\n"
<< "**ERR**: because no full Jacobian exists!\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
#endif
if (ismatrixfree_==false)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: ismatrixfree_==false on level " << level_ << "\n"
<< "**ERR**: in constructor for ismatrixfree_==true - case\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
if (!coarseinterface_)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: ptr to coarseinterface=NULL on level " << level_ << "\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
if (!Mat)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: ptr to Matrix Mat=NULL on level " << level_ << "\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// ------------------------------------------------------------------------
Mat->OptimizeStorage();
// ------------------------------------------------------------------------
// get the current solution to this level
xthis_ = coarseinterface_->restrict_fine_to_this(xfine);
// ------------------------------------------------------------------------
// create this level's preconditioner
// We use a 1-level ML-hierarchy for that
ML_Aggregate_Create(&thislevel_ag_);
ML_Create(&thislevel_ml_,1);
// ------------------------------------------------------------------------
// set the Jacobian on level 0 of the local ml
EpetraMatrix2MLMatrix(thislevel_ml_,0,
(dynamic_cast<Epetra_RowMatrix*>(Mat)));
// ------------------------------------------------------------------------
// construct a 1-level ML-hierarchy on this level as a smoother
// ------------------------------------------------------------------------
ML_Set_PrintLevel(ml_printlevel_);
ML_Aggregate_Set_CoarsenScheme_Uncoupled(thislevel_ag_);
ML_Aggregate_Set_DampingFactor(thislevel_ag_, 0.0);
ML_Aggregate_Set_Threshold(thislevel_ag_, 0.0);
ML_Aggregate_Set_MaxCoarseSize(thislevel_ag_,1);
ML_Aggregate_Set_NullSpace(thislevel_ag_,numPDE,nullspdim,NULL,Mat->NumMyRows());
int thislevel_nlevel = ML_Gen_MGHierarchy_UsingAggregation(thislevel_ml_,0,
ML_INCREASING,thislevel_ag_);
if (thislevel_nlevel != 1)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: ML generated a local hierarchy of " << thislevel_nlevel << " on level " << level_ << "\n"
<< "**ERR**: this is supposed to be 1 Level only!\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// set the smoother
if (level_==0)
Set_Smoother(ml,ag,level_,nlevel,thislevel_ml_,thislevel_ag_,fsmoothertype,nsmooth_fine);
else if (level_ != nlevel_-1) // set the smoother from the input
Set_Smoother(ml,ag,level_,nlevel,thislevel_ml_,thislevel_ag_,smoothertype,nsmooth);
else // set the coarse solver from the input
Set_Smoother(ml,ag,level_,nlevel,thislevel_ml_,thislevel_ag_,coarsesolvetype,nsmooth_coarse);
// create this level's preconditioner class
ML_Epetra::MultiLevelOperator* ml_tmp = new ML_Epetra::MultiLevelOperator(
thislevel_ml_,comm_,
Mat->OperatorDomainMap(),
Mat->OperatorRangeMap());
thislevel_prec_ = new ML_NOX::ML_Nox_ConstrainedMultiLevelOperator(ml_tmp,*coarseinterface_);
if (!thislevel_prec_)
{
cout << "**ERR**: ML_NOX::ML_Nox_NonlinearLevel::ML_Nox_NonlinearLevel:\n"
<< "**ERR**: thislevel_prec_==NULL on level " << level_ << "\n"
<< "**ERR**: file/line: " << __FILE__ << "/" << __LINE__ << "\n"; throw -1;
}
// intensive test of this level's ML-smoother
#if 0
{
cout << "Test of smoother on level " << level_ << endl;
Epetra_Vector *out = new Epetra_Vector(Copy,*xthis_,0);
out->PutScalar(0.0);
cout << "Input\n";
xthis_->PutScalar(1.0);
Mat->Multiply(false,*xthis_,*out);
xthis_->PutScalar(3.0);
cout << "rhs\n";
cout << *out;
double norm = 0.0;
out->Norm1(&norm);
cout << "Norm of rhs = " << norm << endl;
thislevel_prec_->ApplyInverse(*out,*xthis_);
cout << "result after smoother\n";
cout << *xthis_;
delete out; out = 0;
}
if (level_==2) exit(0);
#endif
// ------------------------------------------------------------------------
// generate this level's coarse prepostoperator
if (level_==0)
coarseprepost_ = new ML_NOX::Ml_Nox_CoarsePrePostOperator(*coarseinterface_,
fineinterface_);
// ------------------------------------------------------------------------
// set up NOX on this level
// ------------------------------------------------------------------------
nlParams_ = new Teuchos::ParameterList();
Teuchos::ParameterList& printParams = nlParams_->sublist("Printing");
printParams.setParameter("MyPID", comm_.MyPID());
printParams.setParameter("Output Precision", 9);
printParams.setParameter("Output Processor", 0);
if (ml_printlevel_>9)
printParams.setParameter("Output Information",
NOX::Utils::OuterIteration +
//NOX::Utils::OuterIterationStatusTest +
//NOX::Utils::InnerIteration +
//NOX::Utils::Parameters +
//NOX::Utils::Details +
NOX::Utils::Warning);
else if (ml_printlevel_>8)
printParams.setParameter("Output Information",
NOX::Utils::Warning);
else
printParams.setParameter("Output Information",0);
if (level_==0)
nlParams_->sublist("Solver Options").setParameter("User Defined Pre/Post Operator", *coarseprepost_);
nlParams_->setParameter("Nonlinear Solver", "Line Search Based");
Teuchos::ParameterList& searchParams = nlParams_->sublist("Line Search");
Teuchos::ParameterList* lsParamsptr = 0;
if (isnlnCG_)
{
searchParams.setParameter("Method", "NonlinearCG");
Teuchos::ParameterList& dirParams = nlParams_->sublist("Direction");
dirParams.setParameter("Method", "NonlinearCG");
Teuchos::ParameterList& nlcgParams = dirParams.sublist("Nonlinear CG");
nlcgParams.setParameter("Restart Frequency", 10);
nlcgParams.setParameter("Precondition", "On");
nlcgParams.setParameter("Orthogonalize", "Polak-Ribiere");
//nlcgParams.setParameter("Orthogonalize", "Fletcher-Reeves");
Teuchos::ParameterList& lsParams = nlcgParams.sublist("Linear Solver");
lsParams.setParameter("Aztec Solver", "CG");
lsParams.setParameter("Max Iterations", 1);
lsParams.setParameter("Tolerance", 1e-11);
lsParams.setParameter("Output Frequency", 0);
lsParams.setParameter("Preconditioning", "User Supplied Preconditioner");
lsParams.setParameter("Preconditioner","User Defined");
}
else // Newton's method using ML-preconditioned Aztec as linear solver
{
searchParams.setParameter("Method", "Full Step");
// Sublist for direction
Teuchos::ParameterList& dirParams = nlParams_->sublist("Direction");
dirParams.setParameter("Method", "Newton");
Teuchos::ParameterList& newtonParams = dirParams.sublist("Newton");
newtonParams.setParameter("Forcing Term Method", "Constant");
//newtonParams.setParameter("Forcing Term Method", "Type 1");
//newtonParams.setParameter("Forcing Term Method", "Type 2");
newtonParams.setParameter("Forcing Term Minimum Tolerance", 1.0e-6);
newtonParams.setParameter("Forcing Term Maximum Tolerance", 0.1);
Teuchos::ParameterList& lsParams = newtonParams.sublist("Linear Solver");
lsParamsptr = &lsParams;
lsParams.setParameter("Aztec Solver", "CG");
lsParams.setParameter("Max Iterations", nitersCG_);
lsParams.setParameter("Tolerance", conv_normF_); // FIXME? is this correct?
if (ml_printlevel_>8)
lsParams.setParameter("Output Frequency", 50);
else
lsParams.setParameter("Output Frequency", 0);
lsParams.setParameter("Preconditioning", "User Supplied Preconditioner");
lsParams.setParameter("Preconditioner","User Defined");
}
// create the initial guess
initialGuess_ = new NOX::Epetra::Vector(*xthis_, NOX::DeepCopy, true);
// NOTE: do not delete xthis_, it's used and destroyed by initialGuess_
// create the necessary interfaces
NOX::EpetraNew::Interface::Preconditioner* iPrec = 0;
NOX::EpetraNew::Interface::Required* iReq = 0;
NOX::EpetraNew::Interface::Jacobian* iJac = 0;
if (isnlnCG_)
{
// create the matrixfree operator used in the nlnCG
thislevel_A_ = new NOX::EpetraNew::MatrixFree(*coarseinterface_,*xthis_,false);
// create the necessary interfaces
iPrec = 0;
iReq = coarseinterface_;
iJac = thislevel_A_;
// create the linear system
thislevel_linSys_ = new ML_NOX::Ml_Nox_LinearSystem(
*iJac,*thislevel_A_,*iPrec,
coarseinterface_,*thislevel_prec_,
*xthis_,ismatrixfree_,level_,ml_printlevel_);
// create the group
group_ = new NOX::EpetraNew::Group(printParams,*iReq,*initialGuess_,*thislevel_linSys_);
}
else // Modified Newton's method
{
if (!broyden_)
{
// create the necessary interfaces
iPrec = this;
iReq = coarseinterface_;
iJac = this;
// create the initial guess vector
clone_ = new Epetra_Vector(*xthis_);
// create the linear system
azlinSys_ = new NOX::EpetraNew::LinearSystemAztecOO(
printParams,*lsParamsptr,
*iJac,*SmootherA_,*iPrec,
*thislevel_prec_,*clone_);
}
else
{
// create the initial guess vector
clone_ = new Epetra_Vector(*xthis_);
// create the necessary interfaces
iPrec = this;
iReq = coarseinterface_;
Broyd_ = new NOX::EpetraNew::BroydenOperator(*nlParams_,*clone_,
*SmootherA_,false);
// create the linear system
azlinSys_ = new NOX::EpetraNew::LinearSystemAztecOO(
printParams,*lsParamsptr,
*Broyd_,*SmootherA_,*iPrec,
*thislevel_prec_,*clone_);
}
// create the group
group_ = new NOX::EpetraNew::Group(printParams,*iReq,*initialGuess_,*azlinSys_);
}
// create convergence test
create_Nox_Convergencetest(conv_normF_,conv_nupdate_,conv_maxiter_);
// create the solver
solver_ = new NOX::Solver::Manager(*group_,*combo2_,*nlParams_);
return;
}
