Exemplos de MMP_GPIO_TO_IRQ em C++ (Cpp)

Exemplo n.º 1

Arquivo: aspenite.c Projeto: 01org/thunderbolt-software-kernel-tree

	GPIO79_LCD_DD19,
	GPIO80_LCD_DD20,
	GPIO81_LCD_DD21,
	GPIO82_LCD_DD22,
	GPIO83_LCD_DD23,

	/* Keypad */
	GPIO109_KP_MKIN1,
	GPIO110_KP_MKIN0,
	GPIO111_KP_MKOUT7,
	GPIO112_KP_MKOUT6,
	GPIO121_KP_MKIN4,
};

static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
	.irq_base	= MMP_GPIO_TO_IRQ(0),
};

static struct smc91x_platdata smc91x_info = {
	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
};

static struct resource smc91x_resources[] = {
	[0] = {
		.start	= SMC_CS1_PHYS_BASE + 0x300,
		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= MMP_GPIO_TO_IRQ(27),
		.end	= MMP_GPIO_TO_IRQ(27),

Exemplo n.º 2

Arquivo: jasper.c Projeto: 01org/thunderbolt-software-kernel-tree

	/* MMC3 */
	GPIO165_MMC3_DAT7,
	GPIO162_MMC3_DAT6,
	GPIO166_MMC3_DAT5,
	GPIO163_MMC3_DAT4,
	GPIO167_MMC3_DAT3,
	GPIO164_MMC3_DAT2,
	GPIO168_MMC3_DAT1,
	GPIO111_MMC3_DAT0,
	GPIO112_MMC3_CMD,
	GPIO151_MMC3_CLK,
};

static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
	.irq_base	= MMP_GPIO_TO_IRQ(0),
};

static struct regulator_consumer_supply max8649_supply[] = {
	REGULATOR_SUPPLY("vcc_core", NULL),
};

static struct regulator_init_data max8649_init_data = {
	.constraints	= {
		.name		= "vcc_core range",
		.min_uV		= 1150000,
		.max_uV		= 1280000,
		.always_on	= 1,
		.boot_on	= 1,
		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
	},

Exemplo n.º 3

Arquivo: aspenite.c Projeto: Blopeur/linux-heca

	GPIO112_KP_MKOUT6,
	GPIO121_KP_MKIN4,
};

static struct smc91x_platdata smc91x_info = {
	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
};

static struct resource smc91x_resources[] = {
	[0] = {
		.start	= SMC_CS1_PHYS_BASE + 0x300,
		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= MMP_GPIO_TO_IRQ(27),
		.end	= MMP_GPIO_TO_IRQ(27),
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
	}
};

static struct platform_device smc91x_device = {
	.name		= "smc91x",
	.id		= 0,
	.dev		= {
		.platform_data = &smc91x_info,
	},
	.num_resources	= ARRAY_SIZE(smc91x_resources),
	.resource	= smc91x_resources,
};

Exemplo n.º 4

Arquivo: board-lt02-battery.c Projeto: AlexGreg/android_kernel_samsung_lt02

static void charger_gpio_init(void)
{
	sec_battery_pdata.bat_irq = MMP_GPIO_TO_IRQ(mfp_to_gpio(GPIO005_GPIO_5));
}

Exemplo n.º 5

Arquivo: yellowstone.c Projeto: 12019/android_kernel_samsung_lt02wifi

		.addr = 0x30,
		.irq  = IRQ_MMP3_PMIC,
		.platform_data = &pm800_info,
	},
	{
		.type = "fan53555",
		.addr = 0x60,
		.platform_data = &fan53555_pdata,
	},
};

static struct i2c_board_info yellowstone_twsi3_info[] = {
	{
		.type = "88PM805",
		.addr = 0x38,
		.irq  = MMP_GPIO_TO_IRQ(mfp_to_gpio(GPIO23_GPIO)),
		.platform_data = &pm805_info,
	},
};

/* LCD clock description */
MMP_HW_DESC(fb, "pxa168-fb", 0, 0, "LCDCLK");
struct mmp_hw_desc *yellowstone_hw_desc[] __initdata = {
	&mmp_device_hw_fb,
};

static void __init yellowstone_init(void)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(yellowstone_hw_desc); i++)

Exemplo n.º 6

Arquivo: flint.c Projeto: 0xroot/Blackphone-BP1-Kernel

	GPIO112_ND_RDY0,
	GPIO160_ND_RDY1,
};

static struct smc91x_platdata flint_smc91x_info = {
	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};

static struct resource smc91x_resources[] = {
	[0] = {
		.start  = SMC_CS1_PHYS_BASE + 0x300,
		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
		.flags  = IORESOURCE_MEM,
	},
	[1] = {
		.start  = MMP_GPIO_TO_IRQ(155),
		.end    = MMP_GPIO_TO_IRQ(155),
		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
	}
};

static struct platform_device smc91x_device = {
	.name           = "smc91x",
	.id             = 0,
	.dev            = {
		.platform_data = &flint_smc91x_info,
	},
	.num_resources  = ARRAY_SIZE(smc91x_resources),
	.resource       = smc91x_resources,
};

Exemplo n.º 7

Arquivo: tavorevb.c Projeto: curbthepain/android_kernel_us990_rev

	DF_REn_DF_REn,
	DF_RDY0_DF_RDY0,
};

static struct smc91x_platdata tavorevb_smc91x_info = {
	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
};

static struct resource smc91x_resources[] = {
	[0] = {
		.start	= SMC_CS1_PHYS_BASE + 0x300,
		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= MMP_GPIO_TO_IRQ(80),
		.end	= MMP_GPIO_TO_IRQ(80),
		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
	}
};

static struct platform_device smc91x_device = {
	.name		= "smc91x",
	.id		= 0,
	.dev		= {
		.platform_data = &tavorevb_smc91x_info,
	},
	.num_resources	= ARRAY_SIZE(smc91x_resources),
	.resource	= smc91x_resources,
};

Exemplo n.º 8

Arquivo: ttc_dkb.c Projeto: 250bpm/linux

static struct pm860x_platform_data ttc_dkb_pm8607_info = {
	.irq_base       = IRQ_BOARD_START,
};

static struct i2c_board_info ttc_dkb_i2c_info[] = {
	{
		.type           = "88PM860x",
		.addr           = 0x34,
		.platform_data  = &ttc_dkb_pm8607_info,
		.irq            = IRQ_PXA910_PMIC_INT,
	},
	{
		.type		= "max7312",
		.addr		= 0x23,
		.irq		= MMP_GPIO_TO_IRQ(80),
		.platform_data	= &max7312_data,
	},
};

#ifdef CONFIG_USB_SUPPORT
#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)

static char *pxa910_usb_clock_name[] = {
	[0] = "U2OCLK",
};

static struct mv_usb_platform_data ttc_usb_pdata = {
	.clknum		= 1,
	.clkname	= pxa910_usb_clock_name,
	.vbus		= NULL,

Exemplo n.º 9

Arquivo: ttc_dkb.c Projeto: 0-T-0/ps4-linux

	DF_IO10_ND_IO10,
	DF_IO11_ND_IO11,
	DF_IO12_ND_IO12,
	DF_IO13_ND_IO13,
	DF_IO14_ND_IO14,
	DF_IO15_ND_IO15,
	DF_nCS0_SM_nCS2_nCS0,
	DF_ALE_SM_WEn_ND_ALE,
	DF_CLE_SM_OEn_ND_CLE,
	DF_WEn_DF_WEn,
	DF_REn_DF_REn,
	DF_RDY0_DF_RDY0,
};

static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
	.irq_base	= MMP_GPIO_TO_IRQ(0),
};

static struct mtd_partition ttc_dkb_onenand_partitions[] = {
	{
		.name		= "bootloader",
		.offset		= 0,
		.size		= SZ_1M,
		.mask_flags	= MTD_WRITEABLE,
	}, {
		.name		= "reserved",
		.offset		= MTDPART_OFS_APPEND,
		.size		= SZ_128K,
		.mask_flags	= MTD_WRITEABLE,
	}, {
		.name		= "reserved",