void PROGRAMS_Init(Section* /*sec*/) { /* Setup a special callback to start virtual programs */ call_program=CALLBACK_Allocate(); CALLBACK_Setup(call_program,&PROGRAMS_Handler,CB_RETF,"internal program"); PROGRAMS_MakeFile("CONFIG.COM",CONFIG_ProgramStart); MSG_Add("PROGRAM_CONFIG_FILE_ERROR","Can't open file %s\n"); MSG_Add("PROGRAM_CONFIG_USAGE","Config tool:\nUse -writeconf filename to write the current config.\nUse -writelang filename to write the current language strings.\n"); MSG_Add("PROGRAM_CONFIG_SECURE_ON","Switched to secure mode.\n"); MSG_Add("PROGRAM_CONFIG_SECURE_DISALLOW","This operation is not permitted in secure mode.\n"); MSG_Add("PROGRAM_CONFIG_SECTION_ERROR","Section %s doesn't exist.\n"); MSG_Add("PROGRAM_CONFIG_PROPERTY_ERROR","No such section or property.\n"); MSG_Add("PROGRAM_CONFIG_NO_PROPERTY","There is no property %s in section %s.\n"); MSG_Add("PROGRAM_CONFIG_GET_SYNTAX","Correct syntax: config -get \"section property\".\n"); }
void SHELL_Init() { /* Add messages */ MSG_Add("SHELL_ILLEGAL_PATH","Illegal Path.\n"); MSG_Add("SHELL_CMD_HELP","If you want a list of all supported commands type \033[33;1mhelp /all\033[0m .\nA short list of the most often used commands:\n"); MSG_Add("SHELL_CMD_ECHO_ON","ECHO is on.\n"); MSG_Add("SHELL_CMD_ECHO_OFF","ECHO is off.\n"); MSG_Add("SHELL_ILLEGAL_SWITCH","Illegal switch: %s.\n"); MSG_Add("SHELL_MISSING_PARAMETER","Required parameter missing.\n"); MSG_Add("SHELL_CMD_CHDIR_ERROR","Unable to change to: %s.\n"); MSG_Add("SHELL_CMD_CHDIR_HINT","To change to different drive type \033[31m%c:\033[0m\n"); MSG_Add("SHELL_CMD_CHDIR_HINT_2","directoryname is longer than 8 characters and/or contains spaces.\nTry \033[31mcd %s\033[0m\n"); MSG_Add("SHELL_CMD_CHDIR_HINT_3","You are still on drive Z:, change to a mounted drive with \033[31mC:\033[0m.\n"); MSG_Add("SHELL_CMD_MKDIR_ERROR","Unable to make: %s.\n"); MSG_Add("SHELL_CMD_RMDIR_ERROR","Unable to remove: %s.\n"); MSG_Add("SHELL_CMD_DEL_ERROR","Unable to delete: %s.\n"); MSG_Add("SHELL_SYNTAXERROR","The syntax of the command is incorrect.\n"); MSG_Add("SHELL_CMD_SET_NOT_SET","Environment variable %s not defined.\n"); MSG_Add("SHELL_CMD_SET_OUT_OF_SPACE","Not enough environment space left.\n"); MSG_Add("SHELL_CMD_IF_EXIST_MISSING_FILENAME","IF EXIST: Missing filename.\n"); MSG_Add("SHELL_CMD_IF_ERRORLEVEL_MISSING_NUMBER","IF ERRORLEVEL: Missing number.\n"); MSG_Add("SHELL_CMD_IF_ERRORLEVEL_INVALID_NUMBER","IF ERRORLEVEL: Invalid number.\n"); MSG_Add("SHELL_CMD_GOTO_MISSING_LABEL","No label supplied to GOTO command.\n"); MSG_Add("SHELL_CMD_GOTO_LABEL_NOT_FOUND","GOTO: Label %s not found.\n"); MSG_Add("SHELL_CMD_FILE_NOT_FOUND","File %s not found.\n"); MSG_Add("SHELL_CMD_FILE_EXISTS","File %s already exists.\n"); MSG_Add("SHELL_CMD_DIR_INTRO","Directory of %s.\n"); MSG_Add("SHELL_CMD_DIR_BYTES_USED","%5d File(s) %17s Bytes.\n"); MSG_Add("SHELL_CMD_DIR_BYTES_FREE","%5d Dir(s) %17s Bytes free.\n"); MSG_Add("SHELL_EXECUTE_DRIVE_NOT_FOUND","Drive %c does not exist!\nYou must \033[31mmount\033[0m it first. Type \033[1;33mintro\033[0m or \033[1;33mintro mount\033[0m for more information.\n"); MSG_Add("SHELL_EXECUTE_ILLEGAL_COMMAND","Illegal command: %s.\n"); MSG_Add("SHELL_CMD_PAUSE","Press any key to continue.\n"); MSG_Add("SHELL_CMD_PAUSE_HELP","Waits for 1 keystroke to continue.\n"); MSG_Add("SHELL_CMD_COPY_FAILURE","Copy failure : %s.\n"); MSG_Add("SHELL_CMD_COPY_SUCCESS"," %d File(s) copied.\n"); MSG_Add("SHELL_CMD_SUBST_NO_REMOVE","Removing drive not supported. Doing nothing.\n"); MSG_Add("SHELL_CMD_SUBST_FAILURE","SUBST failed. You either made an error in your commandline or the target drive is already used.\nIt's only possible to use SUBST on Local drives"); MSG_Add("SHELL_STARTUP_BEGIN", "\033[44;1m\xC9\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD" "\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD" "\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xBB\n" "\xBA \033[32mWelcome to DOSBox v%-8s\033[37m \xBA\n" "\xBA \xBA\n" // "\xBA DOSBox runs real and protected mode games. \xBA\n" "\xBA For a short introduction for new users type: \033[33mINTRO\033[37m \xBA\n" "\xBA For supported shell commands type: \033[33mHELP\033[37m \xBA\n" "\xBA \xBA\n" "\xBA To adjust the emulated CPU speed, use \033[31mctrl-F11\033[37m and \033[31mctrl-F12\033[37m. \xBA\n" "\xBA To activate the keymapper \033[31mctrl-F1\033[37m. \xBA\n" "\xBA For more information read the \033[36mREADME\033[37m file in the DOSBox directory. \xBA\n" "\xBA \xBA\n" ); MSG_Add("SHELL_STARTUP_CGA","\xBA DOSBox supports Composite CGA mode. \xBA\n" "\xBA Use \033[31m(alt-)F11\033[37m to change the colours when in this mode. \xBA\n" "\xBA \xBA\n" ); MSG_Add("SHELL_STARTUP_HERC","\xBA Use \033[31mF11\033[37m to cycle through white, amber, and green monochrome color. \xBA\n" "\xBA \xBA\n" ); MSG_Add("SHELL_STARTUP_DEBUG", "\xBA Press \033[31malt-Pause\033[37m to enter the debugger or start the exe with \033[33mDEBUG\033[37m. \xBA\n" "\xBA \xBA\n" ); MSG_Add("SHELL_STARTUP_END", "\xBA \033[32mHAVE FUN!\033[37m \xBA\n" "\xBA \033[32mThe DOSBox Team \033[33mhttp://www.dosbox.com\033[37m \xBA\n" "\xC8\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD" "\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD" "\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xCD\xBC\033[0m\n" //"\n" //Breaks the startup message if you type a mount and a drive change. ); MSG_Add("SHELL_CMD_CHDIR_HELP","Displays/changes the current directory.\n"); MSG_Add("SHELL_CMD_CHDIR_HELP_LONG","CHDIR [drive:][path]\n" "CHDIR [..]\n" "CD [drive:][path]\n" "CD [..]\n\n" " .. Specifies that you want to change to the parent directory.\n\n" "Type CD drive: to display the current directory in the specified drive.\n" "Type CD without parameters to display the current drive and directory.\n"); MSG_Add("SHELL_CMD_CLS_HELP","Clear screen.\n"); MSG_Add("SHELL_CMD_DIR_HELP","Directory View.\n"); MSG_Add("SHELL_CMD_ECHO_HELP","Display messages and enable/disable command echoing.\n"); MSG_Add("SHELL_CMD_EXIT_HELP","Exit from the shell.\n"); MSG_Add("SHELL_CMD_HELP_HELP","Show help.\n"); MSG_Add("SHELL_CMD_MKDIR_HELP","Make Directory.\n"); MSG_Add("SHELL_CMD_MKDIR_HELP_LONG","MKDIR [drive:][path]\n" "MD [drive:][path]\n"); MSG_Add("SHELL_CMD_RMDIR_HELP","Remove Directory.\n"); MSG_Add("SHELL_CMD_RMDIR_HELP_LONG","RMDIR [drive:][path]\n" "RD [drive:][path]\n"); MSG_Add("SHELL_CMD_SET_HELP","Change environment variables.\n"); MSG_Add("SHELL_CMD_IF_HELP","Performs conditional processing in batch programs.\n"); MSG_Add("SHELL_CMD_GOTO_HELP","Jump to a labeled line in a batch script.\n"); MSG_Add("SHELL_CMD_SHIFT_HELP","Leftshift commandline parameters in a batch script.\n"); MSG_Add("SHELL_CMD_TYPE_HELP","Display the contents of a text-file.\n"); MSG_Add("SHELL_CMD_TYPE_HELP_LONG","TYPE [drive:][path][filename]\n"); MSG_Add("SHELL_CMD_REM_HELP","Add comments in a batch file.\n"); MSG_Add("SHELL_CMD_REM_HELP_LONG","REM [comment]\n"); MSG_Add("SHELL_CMD_NO_WILD","This is a simple version of the command, no wildcards allowed!\n"); MSG_Add("SHELL_CMD_RENAME_HELP","Renames one or more files.\n"); MSG_Add("SHELL_CMD_RENAME_HELP_LONG","RENAME [drive:][path]filename1 filename2.\n" "REN [drive:][path]filename1 filename2.\n\n" "Note that you can not specify a new drive or path for your destination file.\n"); MSG_Add("SHELL_CMD_DELETE_HELP","Removes one or more files.\n"); MSG_Add("SHELL_CMD_COPY_HELP","Copy files.\n"); MSG_Add("SHELL_CMD_CALL_HELP","Start a batch file from within another batch file.\n"); MSG_Add("SHELL_CMD_SUBST_HELP","Assign an internal directory to a drive.\n"); MSG_Add("SHELL_CMD_LOADHIGH_HELP","Loads a program into upper memory (requires xms=true,umb=true).\n"); MSG_Add("SHELL_CMD_CHOICE_HELP","Waits for a keypress and sets ERRORLEVEL.\n"); MSG_Add("SHELL_CMD_CHOICE_HELP_LONG","CHOICE [/C:choices] [/N] [/S] text\n" " /C[:]choices - Specifies allowable keys. Default is: yn.\n" " /N - Do not display the choices at end of prompt.\n" " /S - Enables case-sensitive choices to be selected.\n" " text - The text to display as a prompt.\n"); MSG_Add("SHELL_CMD_ATTRIB_HELP","Does nothing. Provided for compatibility.\n"); MSG_Add("SHELL_CMD_PATH_HELP","Provided for compatibility.\n"); MSG_Add("SHELL_CMD_VER_HELP","View and set the reported DOS version.\n"); MSG_Add("SHELL_CMD_VER_VER","DOSBox version %s. Reported DOS version %d.%02d.\n"); #ifdef IPHONEOS MSG_Add("SHELL_CMD_UNZIP_HELP","Extract zip file to current directory.\n"); #endif /* Regular startup */ call_shellstop=CALLBACK_Allocate(); /* Setup the startup CS:IP to kill the last running machine when exitted */ RealPt newcsip=CALLBACK_RealPointer(call_shellstop); SegSet16(cs,RealSeg(newcsip)); reg_ip=RealOff(newcsip); CALLBACK_Setup(call_shellstop,shellstop_handler,CB_IRET,"shell stop"); PROGRAMS_MakeFile("COMMAND.COM",SHELL_ProgramStart); /* Now call up the shell for the first time */ Bit16u psp_seg=DOS_FIRST_SHELL; Bit16u env_seg=DOS_FIRST_SHELL+19; //DOS_GetMemory(1+(4096/16))+1; Bit16u stack_seg=DOS_GetMemory(2048/16); SegSet16(ss,stack_seg); reg_sp=2046; /* Set up int 24 and psp (Telarium games) */ real_writeb(psp_seg+16+1,0,0xea); /* far jmp */ real_writed(psp_seg+16+1,1,real_readd(0,0x24*4)); real_writed(0,0x24*4,((Bit32u)psp_seg<<16) | ((16+1)<<4)); /* Set up int 23 to "int 20" in the psp. Fixes what.exe */ real_writed(0,0x23*4,((Bit32u)psp_seg<<16)); /* Setup MCBs */ DOS_MCB pspmcb((Bit16u)(psp_seg-1)); pspmcb.SetPSPSeg(psp_seg); // MCB of the command shell psp pspmcb.SetSize(0x10+2); pspmcb.SetType(0x4d); DOS_MCB envmcb((Bit16u)(env_seg-1)); envmcb.SetPSPSeg(psp_seg); // MCB of the command shell environment envmcb.SetSize(DOS_MEM_START-env_seg); envmcb.SetType(0x4d); /* Setup environment */ PhysPt env_write=PhysMake(env_seg,0); MEM_BlockWrite(env_write,path_string,(Bitu)(strlen(path_string)+1)); env_write += (PhysPt)(strlen(path_string)+1); MEM_BlockWrite(env_write,comspec_string,(Bitu)(strlen(comspec_string)+1)); env_write += (PhysPt)(strlen(comspec_string)+1); mem_writeb(env_write++,0); mem_writew(env_write,1); env_write+=2; MEM_BlockWrite(env_write,full_name,(Bitu)(strlen(full_name)+1)); DOS_PSP psp(psp_seg); psp.MakeNew(0); dos.psp(psp_seg); /* The start of the filetable in the psp must look like this: * 01 01 01 00 02 * In order to achieve this: First open 2 files. Close the first and * duplicate the second (so the entries get 01) */ Bit16u dummy=0; DOS_OpenFile("CON",OPEN_READWRITE,&dummy); /* STDIN */ DOS_OpenFile("CON",OPEN_READWRITE,&dummy); /* STDOUT */ DOS_CloseFile(0); /* Close STDIN */ DOS_ForceDuplicateEntry(1,0); /* "new" STDIN */ DOS_ForceDuplicateEntry(1,2); /* STDERR */ DOS_OpenFile("CON",OPEN_READWRITE,&dummy); /* STDAUX */ DOS_OpenFile("CON",OPEN_READWRITE,&dummy); /* STDPRN */ psp.SetParent(psp_seg); /* Set the environment */ psp.SetEnvironment(env_seg); /* Set the command line for the shell start up */ CommandTail tail; tail.count=(Bit8u)strlen(init_line); strcpy(tail.buffer,init_line); MEM_BlockWrite(PhysMake(psp_seg,128),&tail,128); /* Setup internal DOS Variables */ dos.dta(RealMake(psp_seg,0x80)); dos.psp(psp_seg); SHELL_ProgramStart(&first_shell); first_shell->Run(); delete first_shell; first_shell = 0;//Make clear that it shouldn't be used anymore }
void PROGRAMS_Init(Section* /*sec*/) { /* Setup a special callback to start virtual programs */ call_program=CALLBACK_Allocate(); CALLBACK_Setup(call_program,&PROGRAMS_Handler,CB_RETF,"internal program"); PROGRAMS_MakeFile("CONFIG.COM",CONFIG_ProgramStart); // listconf MSG_Add("PROGRAM_CONFIG_NOCONFIGFILE","No config file loaded!\n"); MSG_Add("PROGRAM_CONFIG_PRIMARY_CONF","Primary config file: \n%s\n"); MSG_Add("PROGRAM_CONFIG_ADDITIONAL_CONF","Additional config files:\n"); MSG_Add("PROGRAM_CONFIG_CONFDIR","DOSBox %s configuration directory: \n%s\n\n"); // writeconf MSG_Add("PROGRAM_CONFIG_FILE_ERROR","\nCan't open file %s\n"); MSG_Add("PROGRAM_CONFIG_FILE_WHICH","Writing config file %s"); // help MSG_Add("PROGRAM_CONFIG_USAGE","Config tool:\n"\ "-writeconf or -wc without parameter: write to primary loaded config file.\n"\ "-writeconf or -wc with filename: write file to config directory.\n"\ "Use -writelang or -wl filename to write the current language strings.\n"\ "-r [parameters]\n Restart DOSBox, either using the previous parameters or any that are appended.\n"\ "-wcp [filename]\n Write config file to the program directory, dosbox.conf or the specified \n filename.\n"\ "-wcd\n Write to the default config file in the config directory.\n"\ "-l lists configuration parameters.\n"\ "-h, -help, -? sections / sectionname / propertyname\n"\ " Without parameters, displays this help screen. Add \"sections\" for a list of\n sections."\ " For info about a specific section or property add its name behind.\n"\ "-axclear clears the autoexec section.\n"\ "-axadd [line] adds a line to the autoexec section.\n"\ "-axtype prints the content of the autoexec section.\n"\ "-securemode switches to secure mode.\n"\ "-get \"section property\" returns the value of the property.\n"\ "-set \"section property=value\" sets the value." ); MSG_Add("PROGRAM_CONFIG_HLP_PROPHLP","Purpose of property \"%s\" (contained in section \"%s\"):\n%s\n\nPossible Values: %s\nDefault value: %s\nCurrent value: %s\n"); MSG_Add("PROGRAM_CONFIG_HLP_LINEHLP","Purpose of section \"%s\":\n%s\nCurrent value:\n%s\n"); MSG_Add("PROGRAM_CONFIG_HLP_NOCHANGE","This property cannot be changed at runtime.\n"); MSG_Add("PROGRAM_CONFIG_HLP_POSINT","positive integer"); MSG_Add("PROGRAM_CONFIG_HLP_SECTHLP","Section %s contains the following properties:\n"); MSG_Add("PROGRAM_CONFIG_HLP_SECTLIST","DOSBox configuration contains the following sections:\n\n"); MSG_Add("PROGRAM_CONFIG_SECURE_ON","Switched to secure mode.\n"); MSG_Add("PROGRAM_CONFIG_SECURE_DISALLOW","This operation is not permitted in secure mode.\n"); MSG_Add("PROGRAM_CONFIG_SECTION_ERROR","Section %s doesn't exist.\n"); MSG_Add("PROGRAM_CONFIG_VALUE_ERROR","\"%s\" is not a valid value for property %s.\n"); MSG_Add("PROGRAM_CONFIG_PROPERTY_ERROR","No such section or property.\n"); MSG_Add("PROGRAM_CONFIG_NO_PROPERTY","There is no property %s in section %s.\n"); MSG_Add("PROGRAM_CONFIG_SET_SYNTAX","Correct syntax: config -set \"section property\".\n"); MSG_Add("PROGRAM_CONFIG_GET_SYNTAX","Correct syntax: config -get \"section property\".\n"); MSG_Add("PROGRAM_CONFIG_PRINT_STARTUP","\nDOSBox was started with the following command line parameters:\n%s"); MSG_Add("PROGRAM_CONFIG_MISSINGPARAM","Missing parameter."); }