Exemplos de NET_init em C++ (Cpp)

Exemplo n.º 1

Arquivo: Plugin.c Projeto: Asmodean-/PCSXR

void ResetPlugins() {
	long ret;

	CDR_shutdown();
	GPU_shutdown();
	SPU_shutdown();
	PAD1_shutdown();
	PAD2_shutdown();
#ifdef ENABLE_SIO1API
	SIO1_shutdown();
#endif
	if (Config.UseNet) NET_shutdown();

	ret = CDR_init();
	if (ret < 0) { SysMessage(_("CDRinit error: %d"), ret); return; }
	ret = GPU_init();
	if (ret < 0) { SysMessage(_("GPUinit error: %d"), ret); return; }
	ret = SPU_init();
	if (ret < 0) { SysMessage(_("SPUinit error: %d"), ret); return; }
	ret = PAD1_init(1);
	if (ret < 0) { SysMessage(_("PAD1init error: %d"), ret); return; }
	ret = PAD2_init(2);
	if (ret < 0) { SysMessage(_("PAD2init error: %d"), ret); return; }
#ifdef ENABLE_SIO1API
	ret = SIO1_init();
	if (ret < 0) { SysMessage(_("SIO1init error: %d!"), ret); return; }
#endif

	if (Config.UseNet) {
		ret = NET_init();
		if (ret < 0) { SysMessage(_("NETinit error: %d"), ret); return; }
	}

	NetOpened = FALSE;
}

Exemplo n.º 2

Arquivo: plugin.c Projeto: Kilvas/lioneditor

void ResetPlugins() {
	int ret;

	CDR_shutdown();
	GPU_shutdown();
	SPU_shutdown();
	PAD1_shutdown();
	PAD2_shutdown();
	if (Config.UseNet) NET_shutdown(); 

	ret = CDR_init();
	if (ret != 0) { SysMessage (_("CDRinit error: %d"), ret); return; }
	ret = GPU_init();
	if (ret != 0) { SysMessage (_("GPUinit error: %d"), ret); return; }
	ret = SPU_init();
	if (ret != 0) { SysMessage (_("SPUinit error: %d"), ret); return; }
	ret = PAD1_init(1);
	if (ret != 0) { SysMessage (_("PAD1init error: %d"), ret); return; }
	ret = PAD2_init(2);
	if (ret != 0) { SysMessage (_("PAD2init error: %d"), ret); return; }
	if (Config.UseNet) {
		ret = NET_init();
		if (ret < 0) { SysMessage (_("NETinit error: %d"), ret); return; }
	}

	NetOpened = 0;
}

Exemplo n.º 3

Arquivo: main.c Projeto: BackupTheBerlios/uwsdr-svn

__noreturn int main()
{
  s16 result;
  u32 ul;

  __disable_interrupt();

  //*** Hardware Init ***
  
  /* When using the JTAG debugger the hardware is not always initialised to
  the correct default state.  This line just ensures that this does not
  cause all interrupts to be masked at the start. */
  AT91C_BASE_AIC->AIC_EOICR = 0;
  
  /* Enable the peripheral clock. */
  AT91F_PMC_EnablePeriphClock( AT91C_BASE_PMC, 1 << AT91C_ID_PIOA );
  AT91F_PMC_EnablePeriphClock( AT91C_BASE_PMC, 1 << AT91C_ID_PIOB ) ;
  AT91F_PMC_EnablePeriphClock( AT91C_BASE_PMC, 1 << AT91C_ID_EMAC ) ;
    
  // This Pull ups are disabled
  *AT91C_PIOB_PPUDR = (AT91C_PIO_PB5|AT91C_PIO_PB6|AT91C_PIO_PB13|AT91C_PIO_PB14|AT91C_PIO_PB26);

  AT91F_PIO_CfgPeriph(PIOA, 0, 0);
  AT91F_PIO_CfgPeriph(PIOB, 0, 0);
  
  CLR_PIN(PIOB, AT91C_PB18_EF100);
  SET_OUTPUT(PIOA, AT91C_PA22_TK|AT91C_PA21_TF|AT91C_PA0_RXD0);
  SET_OUTPUT(PIOB, AT91C_PIO_PB21);

  // Release Reset of the CODEC


  NET_init(RX_buf, TX_buf);
  EMAC_Init();

  __enable_interrupt();

  u8 buf[10];
  
  buf[0] = 0x03;
  buf[1] = 0x4B;

  I2C_Init(100);
 
  CODEC_init();
  
  RING_init(_CODEC_DATA_START_ADR, _CODEC_DATABLOCK_SIZE, _CODEC_NUM_OF_BUFS);
  
  // Init the UWSDR sub system
  UWSDR_init();
  
  
  //CODEC_start();

  //*********** THE MAIN LOOP ************
  
  _DBG_STATE_POS(_DBG_STATE_MAIN);

  while(1) {
    result = EMAC_Poll();
    _DBG_STATE_POS(_DBG_STATE_MAIN);
    
    if(result == _NET_GOT_RX_DATA) {
      NET_process();
    }
    _DBG_STATE_POS(_DBG_STATE_MAIN);

    ul = AT91C_BASE_SSC->SSC_SR;
    if((ul & AT91C_SSC_ENDRX) && CODEC_IS_MODE(CODEC_MODE_RX)) {
//      DBG_LED1_ON();
      CODEC_SSC_ISR();
      UWSDR_upload();
//      DBG_LED1_OFF();
    }
    if(ul & AT91C_SSC_ENDRX && CODEC_IS_MODE(CODEC_MODE_TX)) {
      CODEC_SSC_ISR();
      
    }

    _DBG_STATE_POS(_DBG_STATE_MAIN);
  }
}

Exemplo n.º 4

Arquivo: fitp.c Projeto: BeeeOn/sensors

void fitp_init(){
    NET_init();
}