void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( layer );
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_item->SetAngle( angle );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
Close( true );
}
void D_PAD::Rotate( const wxPoint& aRotCentre, double aAngle )
{
RotatePoint( &m_Pos, aRotCentre, aAngle );
m_Orient += aAngle;
NORMALIZE_ANGLE_360( m_Orient );
SetLocalCoord();
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
m_parent->SaveCopyInUndoList( m_Item, UR_CHANGED );
wxString msg;
if( m_DC )
m_Item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
msg = m_Center_StartXCtrl->GetValue();
m_Item->SetStartX( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_Center_StartYCtrl->GetValue();
m_Item->SetStartY( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_EndX_Radius_Ctrl->GetValue();
m_Item->SetEndX( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_EndY_Ctrl->GetValue();
m_Item->SetEndY( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_ThicknessCtrl->GetValue();
m_Item->SetWidth( ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() ));
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ReturnValueFromString( g_UserUnit, msg, m_parent->GetInternalUnits() );
m_Item->SetLayer( m_LayerSelectionCtrl->GetCurrentSelection() + FIRST_NO_COPPER_LAYER);
if( m_Item->GetLayer() == EDGE_N )
m_brdSettings.m_EdgeSegmentWidth = thickness;
else
m_brdSettings.m_DrawSegmentWidth = thickness;
if( m_Item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_Item->SetAngle( angle );
}
m_parent->OnModify();
if( m_DC )
m_Item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
m_Item->DisplayInfo( m_parent );
m_parent->SetDesignSettings( m_brdSettings );
Close( true );
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
{
if( !itemValuesOK() )
return;
m_parent->SaveCopyInUndoList( m_item, UR_CHANGED );
wxString msg;
if( m_DC )
m_item->Draw( m_parent->GetCanvas(), m_DC, GR_XOR );
msg = m_Center_StartXCtrl->GetValue();
m_item->SetStartX( ValueFromString( g_UserUnit, msg ) );
msg = m_Center_StartYCtrl->GetValue();
m_item->SetStartY( ValueFromString( g_UserUnit, msg ) );
msg = m_EndX_Radius_Ctrl->GetValue();
m_item->SetEndX( ValueFromString( g_UserUnit, msg ) );
msg = m_EndY_Ctrl->GetValue();
m_item->SetEndY( ValueFromString( g_UserUnit, msg ) );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_item->SetLayer( ToLAYER_ID( m_LayerSelectionCtrl->GetLayerSelection() ) );
if( m_item->GetLayer() == Edge_Cuts )
m_brdSettings.m_EdgeSegmentWidth = thickness;
else
m_brdSettings.m_DrawSegmentWidth = thickness;
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360( angle );
m_item->SetAngle( angle );
}
m_parent->OnModify();
if( m_DC )
m_item->Draw( m_parent->GetCanvas(), m_DC, GR_OR );
m_parent->SetMsgPanel( m_item );
m_parent->SetDesignSettings( m_brdSettings );
Close( true );
}
void TEXTE_PCB::Rotate( const wxPoint& aRotCentre, double aAngle )
{
RotatePoint( &m_Pos, aRotCentre, aAngle );
m_Orient += aAngle;
NORMALIZE_ANGLE_360( m_Orient );
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::Validate()
{
wxArrayString error_msgs;
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::Validate() )
return false;
// Load the start and end points -- all types use these in the checks.
int startx = ValueFromString( g_UserUnit, m_Center_StartXCtrl->GetValue() );
int starty = ValueFromString( g_UserUnit, m_Center_StartYCtrl->GetValue() );
int endx = ValueFromString( g_UserUnit, m_EndX_Radius_Ctrl->GetValue() );
int endy = ValueFromString( g_UserUnit, m_EndY_Ctrl->GetValue() );
// Type specific checks.
switch( m_item->GetShape() )
{
case S_ARC:
// Check angle of arc.
double angle;
m_AngleCtrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360( angle );
if( angle == 0 )
{
error_msgs.Add( _( "The arc angle must be greater than zero." ) );
}
// Fall through.
case S_CIRCLE:
// Check radius.
if( (startx == endx) && (starty == endy) )
error_msgs.Add( _( "The radius must be greater than zero." ) );
break;
default:
// Check start and end are not the same.
if( (startx == endx) && (starty == endy) )
error_msgs.Add( _( "The start and end points cannot be the same." ) );
break;
}
// Check the item thickness.
int thickness = ValueFromString( g_UserUnit, m_ThicknessCtrl->GetValue() );
if( thickness <= 0 )
error_msgs.Add( _( "The item thickness must be greater than zero." ) );
// And the default thickness.
thickness = ValueFromString( g_UserUnit, m_DefaultThicknessCtrl->GetValue() );
if( thickness <= 0 )
error_msgs.Add( _( "The default thickness must be greater than zero." ) );
if( error_msgs.GetCount() )
{
HTML_MESSAGE_BOX dlg( this, _( "Error list" ) );
dlg.ListSet( error_msgs );
dlg.ShowModal();
}
return error_msgs.GetCount() == 0;
}
void DRAWSEGMENT::SetAngle( double aAngle )
{
NORMALIZE_ANGLE_360( aAngle );
m_Angle = aAngle;
}
