Exemplos de NPC_Util_MargeStrFromArgFile em C++ (Cpp)

Exemplo n.º 1

Arquivo: npcutil.c Projeto: chinaSaber/custom-sa

char *NPC_Util_GetArgStr(int index, char *argstr, int len)
{
	char filename[128];
	char *cret = NULL;
	if (NPC_Util_CheckAssignArgFile(index, filename) != NULL) {
		if (NPC_Util_MargeStrFromArgFile(filename, argstr, len) != NULL) {
			cret = argstr;
		}
	} else {
		if (CHAR_getChar(index, CHAR_NPCARGUMENT) != NULL) {
			strcpy(argstr, CHAR_getChar(index, CHAR_NPCARGUMENT));
			cret = argstr;
		} else {
			cret = NULL;
		}
	}
	if (cret == NULL)
		print("File:%s\n",
		      NPC_Util_CheckAssignArgFile(index, filename));

	return (cret);
}

Exemplo n.º 2

Arquivo: npcutil.c Projeto: Nurarihyo/smo-sa

/*#ifdef _JZ_NPCBUF
		CHAR_NPCBUFPOINT = CHAR_WORKEQUITFIRE,   					//NPC arg文件緩存指針
		CHAR_NPCTIMERH32 = CHAR_WORKEQUITTHUNDER,					//NPC 計時器(高32位)
		CHAR_NPCTIMERL32 = CHAR_WORKEQUITICE,							//NPC 計時器(低32位)
		CHAR_NPCFILECTIMEH32 = CHAR_WORKEQUITWEAKEN,			//讀NPC arg文件的時間(高32位)
		CHAR_NPCFILECTIMEL32 = CHAR_WORKEQUITBARRIER,			//讀NPC arg文件的時間(低32位)
		//CHAR_NPCFILECTIME_HOUR = CHAR_WORKEQUITNOCAST,		//讀NPC arg文件時的時鐘
		//CHAR_NPCFILECTIME_MIN = CHAR_WORKEQUITFALLRIDE,		//讀NPC arg文件時的分鐘
#endif*/
char *NPC_Util_GetArgStr( int index, char *argstr, int len)
{
	char	filename[128];
	Char *ch;
	char	*cret = NULL;
	struct stat buff;
	int fd;
	char	opfile[128];
	if( (ch = CHAR_getCharPointer( index)) == NULL ) {
		print("GetArgStr Not get CharPointer\n");
		return NULL;				//獲得NPC結構指針
	}
	if( NPC_Util_CheckAssignArgFile( index, filename) != NULL ) {

		sprintf( opfile, "%s/%s", getNpcdir(),filename);
		if(stat(opfile,&buff)!=0)
		{
			print("NPC緩存機制 stat error:%s\n",strerror( errno ));
			buff.st_size = NPC_UTIL_GETARGSTR_BUFSIZE;
		}else{
			buff.st_size++;
		}
		//if(buff.st_size > len)buff.st_size = len;
		cret = (char *)ch->workint[CHAR_NPCBUFPOINT];												//獲得NPC緩存指針
		if( cret == NULL ) {																								//首先判斷NPC緩存是否已經加載數據
			//未加載緩存，申請內存，並將文件內容讀到緩存中
loadarg:
			cret = allocateMemory((unsigned int)buff.st_size);															//申請內存
			memset( cret, 0,buff.st_size);
			if( cret == NULL ) {																							//判斷申請內存是否成功，如果不成功則採用舊的模式
				//舊的文件即時讀取模式
				//print("NPC BUF OLD LOAD FILE %d\n",buff.st_size);
				if( NPC_Util_MargeStrFromArgFile( opfile, argstr, len) != NULL ) {
					cret = argstr;
				}
			}else{
				//新的NPC緩存模式
				//print("NPC BUF NEW LOAD FILE %d\n",buff.st_size);
				if( NPC_Util_MargeStrFromArgFile( opfile, cret, buff.st_size) != NULL ) {
					//memcpy(cret,argstr,buff.st_size);
					ch->workint[CHAR_NPCBUFPOINT] = (int)cret;
					ch->workint[CHAR_NPCFILECTIMEH32] = (unsigned long)buff.st_mtime;
				}else{
					freeMemory(cret);
					cret = NULL;
				}
			}
		}else
		{
			//print("NPC BUF NEW %d\n",buff.st_size);
			//已加載緩存，判斷是否數據被更改，如果沒被更改直接返回緩存指針，如果更改的話則GOTO到未加載緩存的代碼
			//2個計時器暫時不用
			//if(buff.st_size > NPC_UTIL_GETARGSTR_BUFSIZE)buff.st_size = NPC_UTIL_GETARGSTR_BUFSIZE;
			if((unsigned long)ch->workint[CHAR_NPCFILECTIMEH32] != (unsigned long)buff.st_mtime)
			{
					print("npc updata:%s\n",opfile);
					freeMemory(cret);
					cret = NULL;
					goto loadarg;
			}
			//memcpy(argstr,cret,buff.st_size);
			//cret = argstr;
		}
	}else {
		if( CHAR_getChar( index, CHAR_NPCARGUMENT) != NULL ){
			strcpy( argstr, CHAR_getChar( index, CHAR_NPCARGUMENT));
			cret = argstr;
		}else{
			cret = NULL;
		}
	}
	if( cret == NULL ) print("File:%s\n", NPC_Util_CheckAssignArgFile( index, opfile));

	return( cret);

/*	if( NPC_Util_CheckAssignArgFile( index, filename) != NULL ) {
		if( NPC_Util_MargeStrFromArgFile( filename, argstr, len) != NULL ) {
			cret = argstr;
		}
	}else {
		if( CHAR_getChar( index, CHAR_NPCARGUMENT) != NULL ){
			strcpy( argstr, CHAR_getChar( index, CHAR_NPCARGUMENT));
			cret = argstr;
		}else{
			cret = NULL;
		}
	}
	if( cret == NULL ) print("File:%s\n", NPC_Util_CheckAssignArgFile( index, filename));

	return( cret);*/
}