/**@brief Application main function.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
// Initialize
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
peer_manager_init(erase_bonds);
if (erase_bonds == true)
{
NRF_LOG_INFO("Bonds erased!\r\n");
}
gap_params_init();
advertising_init();
services_init();
sim_init();
conn_params_init();
// Start execution
application_timers_start();
NRF_LOG_INFO("Location and Navigation App started\r\n");
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop
for (;;)
{
if (NRF_LOG_PROCESS() == false)
{
power_manage();
}
}
}
int main(void)
{
ret_code_t err_code;
bool erase_bonds;
err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
NRF_LOG_PRINTF("Relay Example\r\n");
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, NULL);
buttons_leds_init(&erase_bonds);
if (erase_bonds)
{
NRF_LOG_PRINTF("Bonds erased!\r\n");
}
ble_stack_init();
peer_manager_init(erase_bonds);
db_discovery_init();
hrs_c_init();
rscs_c_init();
gap_params_init();
conn_params_init();
services_init();
advertising_init();
adv_scan_start();
for (;;)
{
// Wait for BLE events.
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
peer_manager_init(erase_bonds);
if (erase_bonds == true)
{
NRF_LOG_INFO("Bonds erased!\r\n");
}
gap_params_init();
advertising_init();
gatt_init();
services_init();
sensor_simulator_init();
conn_params_init();
// Start execution.
NRF_LOG_INFO("Heart Rate Sensor Start!\r\n");
application_timers_start();
advertising_start();
// Enter main loop.
for (;;)
{
if (NRF_LOG_PROCESS() == false)
{
power_manage();
}
}
}
int main(void)
{
// Enable the constant latency sub power mode to minimize the time it takes
// for the SPIS peripheral to become active after the CSN line is asserted
// (when the CPU is in sleep mode).
NRF_POWER->TASKS_CONSTLAT = 1;
LEDS_CONFIGURE(BSP_LED_0_MASK);
LEDS_OFF(BSP_LED_0_MASK);
APP_ERROR_CHECK(NRF_LOG_INIT(NULL));
NRF_LOG_INFO("SPIS example\r\n");
nrf_drv_spis_config_t spis_config = NRF_DRV_SPIS_DEFAULT_CONFIG;
spis_config.csn_pin = APP_SPIS_CS_PIN;
spis_config.miso_pin = APP_SPIS_MISO_PIN;
spis_config.mosi_pin = APP_SPIS_MOSI_PIN;
spis_config.sck_pin = APP_SPIS_SCK_PIN;
APP_ERROR_CHECK(nrf_drv_spis_init(&spis, &spis_config, spis_event_handler));
while (1)
{
memset(m_rx_buf, 0, m_length);
spis_xfer_done = false;
APP_ERROR_CHECK(nrf_drv_spis_buffers_set(&spis, m_tx_buf, m_length, m_rx_buf, m_length));
while (!spis_xfer_done)
{
__WFE();
}
NRF_LOG_FLUSH();
LEDS_INVERT(BSP_LED_0_MASK);
}
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
NfcRetval ret_val;
uint32_t len = sizeof(ndef_msg_buf);
uint32_t err_code;
err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
/* Configure LED-pins as outputs */
LEDS_CONFIGURE(BSP_LED_0_MASK);
LEDS_OFF(BSP_LED_0_MASK);
/* Set up NFC */
ret_val = nfcSetup(nfc_callback, NULL);
APP_ERROR_CHECK(ret_val);
/* Encode welcome message */
welcome_msg_encode(ndef_msg_buf, &len);
/* Set created message as the NFC payload */
ret_val = nfcSetPayload( (char*)ndef_msg_buf, len);
APP_ERROR_CHECK(ret_val);
/* Start sensing NFC field */
ret_val = nfcStartEmulation();
APP_ERROR_CHECK(ret_val);
while(1)
{
if (!NFC_NEED_MCU_RUN_STATE())
{
__WFE();
}
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
peer_manager_init(erase_bonds);
if (erase_bonds == true)
{
NRF_LOG_INFO("Bonds erased!\r\n");
}
gap_params_init();
advertising_init();
db_discovery_init();
alert_notification_init();
conn_params_init();
// Start execution.
NRF_LOG_INFO("Alert Notification started\r\n");
advertising_start();
// Enter main loop.
for (;;)
{
if (NRF_LOG_PROCESS() == false)
{
power_manage();
}
}
}
static void nrf_log_init(void)
{
// Initialize logging library.
uint32_t err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
}
void log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT(NULL);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the nrf log module.
*/
void nrf_log_init(void)
{
ret_code_t err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
}
void app_trace_init(void)
{
(void)NRF_LOG_INIT();
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
gpio_init();
// TODO: Measure battery
nrf_gpio_pin_set(LED_1);
err_code = NRF_LOG_INIT();
APP_ERROR_CHECK(err_code);
twi_init();
sensors_init(&m_app_twi, sensors_callback);
timers_init();
buttons_leds_init();
// erase_bonds = false;
ble_stack_init();
detect_erase_bond_pressed(&erase_bonds);
// bool button;
// err_code = app_button_is_pushed(0, &button);
// APP_ERROR_CHECK(err_code);
// uint8_t count = 0;
// while (button) {
// nrf_delay_ms(100);
// count++;
// if (count > 20) {
// erase_bonds = true;
// NRF_LOG_DEBUG("Erasing bonds!\r\n");
// break;
// }
// err_code = app_button_is_pushed(0, &button);
// APP_ERROR_CHECK(err_code);
// }
// while (button) {
// nrf_gpio_pin_clear(LED_1);
// nrf_delay_ms(200);
// nrf_gpio_pin_set(LED_1);
// nrf_delay_ms(200);
// err_code = app_button_is_pushed(0, &button);
// APP_ERROR_CHECK(err_code);
// }
//
peer_manager_init(erase_bonds);
gap_params_init();
advertising_init();
services_init();
conn_params_init();
// radio_notification_init();
nrf_gpio_pin_clear(LED_1);
// Start execution.
application_timers_start();
advertising_start();
// sensors_measure();
sensors_timers_init();
sensors_timers_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}