Exemplo n.º 1
0
/**
	Connect this ObexFTP client using a given source address by sending an OBEX CONNECT request.

	\param cli an obexftp_client_t created by obexftp_open().
	\param src optional local source interface address (transport specific)
	\param device the device address to connect to (transport specific)
	\param port the port/channel for the device address
	\param uuid UUID string for CONNECT (no default)
	\param uuid_len length of the UUID string (excluding terminating zero)

	\return the result of the CONNECT request, -1 on error

	\note Always use a UUID (except for OBEX PUSH)
 */
int obexftp_connect_src(obexftp_client_t *cli, const char *src, const char *device, int port, const uint8_t uuid[], uint32_t uuid_len)
{
	struct sockaddr_in peer;
#ifdef HAVE_BLUETOOTH
	char *devicedup, *devicep;
	bdaddr_t bdaddr, src_addr;
#endif
#ifdef HAVE_USB
	int obex_intf_cnt;
	obex_interface_t *obex_intf;
#endif
	obex_object_t *object;
	obex_headerdata_t hv;
	int ret = -1; /* no connection yet */

	DEBUG(3, "%s()\n", __func__);
	return_val_if_fail(cli != NULL, -EINVAL);

	cli->infocb(OBEXFTP_EV_CONNECTING, "", 0, cli->infocb_data);

	switch (cli->transport) {

	case OBEX_TRANS_IRDA:
		ret = IrOBEX_TransportConnect(cli->obexhandle, "OBEX");
		DEBUG(3, "%s() IR %d\n", __func__, ret);
		break;
		
	case OBEX_TRANS_INET:
		if (!device) {
			ret = -EINVAL;
			break;
		}
#ifdef _WIN32
		peer.sin_addr.s_addr = inet_addr(device);
		ret = (peer.sin_addr.s_addr == INADDR_NONE) ? 0 : 1;
#else
		ret = inet_aton(device, &peer.sin_addr);
#endif
		if (ret) {
			peer.sin_family = AF_INET;
			peer.sin_port = htons(port); /* overridden with OBEX_PORT 650 anyhow */
			ret = InOBEX_TransportConnect(cli->obexhandle, (struct sockaddr *) &peer,
						  sizeof(struct sockaddr_in));
			DEBUG(3, "%s() TCP %d\n", __func__, ret);
		} else
			ret = -EINVAL; /* is there a better errno? */
		break;

	case OBEX_TRANS_CUSTOM:
		/* don't change the custom transport once it is in place */
		if (cli->ctrans == NULL) {
			cli->ctrans = cobex_ctrans (device);
                	if(OBEX_RegisterCTransport(cli->obexhandle, cli->ctrans) < 0) {
                        	DEBUG(1, "Custom transport callback-registration failed\n");
	                }
	        }
		ret = OBEX_TransportConnect(cli->obexhandle, NULL, 0);
		DEBUG(3, "%s() TC %d\n", __func__, ret);
		break;

#ifdef HAVE_BLUETOOTH
	case OBEX_TRANS_BLUETOOTH:
		if (!src) {
			bacpy(&src_addr, BDADDR_ANY);
		}
#ifdef HAVE_SDPLIB
		else if (!strncmp(src, "hci", 3)) {
			hci_devba(atoi(src + 3), &src_addr);
		}
		else if (atoi(src) != 0) {
			hci_devba(atoi(src), &src_addr);
		}
#endif
		else {
			str2ba(src, &src_addr);
		}
		if (!device) {
			ret = -EINVAL;
			break;
		}
		if (port < 1) {
			port = obexftp_browse_bt(device, OBEX_FTP_SERVICE);
		}
		/* transform some chars to colons */
		devicedup = devicep = strdup(device);
		for (; *devicep; devicep++) {
			if (*devicep == '-') *devicep = ':';
			if (*devicep == '_') *devicep = ':';
			if (*devicep == '/') *devicep = ':';
		}
		(void) str2ba(devicedup, &bdaddr);
		free(devicedup);
		ret = BtOBEX_TransportConnect(cli->obexhandle, &src_addr, &bdaddr, (uint8_t)port);
		DEBUG(3, "%s() BT %d\n", __func__, ret);
		break;
#endif /* HAVE_BLUETOOTH */

#ifdef HAVE_USB
	case OBEX_TRANS_USB:
		obex_intf_cnt = OBEX_FindInterfaces(cli->obexhandle, &obex_intf);
		DEBUG(3, "%s() \n", __func__);
		if (obex_intf_cnt <= 0) {
			DEBUG(1, "%s() there are no valid USB interfaces\n", __func__);
			ret = -EINVAL; /* is there a better errno? */
		}
		else if (port >= obex_intf_cnt) {
			DEBUG(1, "%s() %d is an invalid USB interface number\n", __func__, port);
			ret = -EINVAL; /* is there a better errno? */
		} else
			ret = OBEX_InterfaceConnect(cli->obexhandle, &obex_intf[port]);
		DEBUG(3, "%s() USB %d\n", __func__, ret);
		break;
#endif /* HAVE_USB */

	default:
		ret = -ESOCKTNOSUPPORT;
		break;
	}

	if (ret < 0) {
		/* could be -EBUSY or -ESOCKTNOSUPPORT */
		cli->infocb(OBEXFTP_EV_ERR, "connect", 0, cli->infocb_data);
		return ret;
	}

#ifdef COMPAT_S45
	// try S45 UUID first.
	object = OBEX_ObjectNew(cli->obexhandle, OBEX_CMD_CONNECT);
	hv.bs = UUID_S45;
	if(OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_TARGET,
                                hv, sizeof(UUID_S45), OBEX_FL_FIT_ONE_PACKET) < 0) {
                DEBUG(1, "Error adding header\n");
                OBEX_ObjectDelete(cli->obexhandle, object);
                return -1;
        }
	cli->connection_id = 0xffffffff;
	ret = cli_sync_request(cli, object);

	if(ret < 0) {
		cli->infocb(OBEXFTP_EV_ERR, "S45 UUID", 0, cli->infocb_data);
#endif
		object = OBEX_ObjectNew(cli->obexhandle, OBEX_CMD_CONNECT);
		if (uuid) {
			hv.bs = uuid;
			if(OBEX_ObjectAddHeader(cli->obexhandle, object, OBEX_HDR_TARGET,
        	        	                hv, uuid_len, OBEX_FL_FIT_ONE_PACKET) < 0) {
	        	        DEBUG(1, "Error adding header\n");
		                OBEX_ObjectDelete(cli->obexhandle, object);
                		return -1;
	        	}
		}
		cli->connection_id = 0xffffffff;
		ret = cli_sync_request(cli, object);
		if (!OBEXFTP_USE_CONN_HEADER(cli->quirks))
			cli->connection_id = 0xffffffff;
#ifdef COMPAT_S45
	}
#endif

	if(ret < 0)
		cli->infocb(OBEXFTP_EV_ERR, "send UUID", 0, cli->infocb_data);
	else
		cli->infocb(OBEXFTP_EV_OK, "", 0, cli->infocb_data);

	return ret;
}
Exemplo n.º 2
0
int main (int argc, char *argv[])
{
    char cmd[10];
    int num, end = 0;
    int cobex = FALSE, tcpobex = FALSE, btobex = FALSE, r320 = FALSE, usbobex = FALSE;
    obex_t *handle;
#ifdef HAVE_BLUETOOTH
    bdaddr_t bdaddr;
    uint8_t channel = 0;
#endif

#ifdef HAVE_USB
    obex_interface_t *obex_intf;
#endif

    struct context global_context = {0,};

#ifndef _WIN32

    char *port;
    obex_ctrans_t custfunc;

    if( (argc == 2 || argc ==3) && (strcmp(argv[1], "-s") == 0 ) )
        cobex = TRUE;
    if( (argc == 2 || argc ==3) && (strcmp(argv[1], "-r") == 0 ) ) {
        cobex = TRUE;
        r320 = TRUE;
    }
#endif

    if( (argc == 2) && (strcmp(argv[1], "-i") == 0 ) )
        tcpobex = TRUE;
    if( (argc >= 2) && (strcmp(argv[1], "-b") == 0 ) )
        btobex = TRUE;
    if( (argc >= 2) && (strcmp(argv[1], "-u") == 0 ) )
        usbobex = TRUE;

    if(cobex)	{
#ifndef _WIN32
        if(argc == 3)
            port = argv[2];
        else
            port = "/dev/ttyS0";

        if(r320)
            printf("OBEX to R320 on %s!\n", port);
        else
            printf("OBEX on %s!\n", port);

        custfunc.customdata = cobex_open(port, r320);

        if(custfunc.customdata == NULL) {
            printf("cobex_open() failed\n");
            return -1;
        }

        if(! (handle = OBEX_Init(OBEX_TRANS_CUSTOM, obex_event, 0)))	{
            perror( "OBEX_Init failed");
            return -1;
        }

        custfunc.connect = cobex_connect;
        custfunc.disconnect = cobex_disconnect;
        custfunc.write = cobex_write;
        custfunc.handleinput = cobex_handle_input;
        custfunc.listen = cobex_connect;	// Listen and connect is 100% same on cable

        if(OBEX_RegisterCTransport(handle, &custfunc) < 0)	{
            printf("Custom transport callback-registration failed\n");
        }
#else
        printf("Not implemented in Win32 yet.\n");
#endif	// _WIN32
    }

    else if(tcpobex) {
        printf("Using TCP transport\n");
        if(! (handle = OBEX_Init(OBEX_TRANS_INET, obex_event, 0)))	{
            perror( "OBEX_Init failed");
            exit(0);
        }
    }
    else if(btobex) {
#ifndef _WIN32
        switch (argc) {
#ifdef HAVE_BLUETOOTH
        case 4:
            str2ba(argv[2], &bdaddr);
            channel = atoi(argv[3]);
            break;
        case 3:
            str2ba(argv[2], &bdaddr);
            if (bacmp(&bdaddr, BDADDR_ANY) == 0)
                channel = atoi(argv[2]);
            else
                channel = BT_CHANNEL;
            break;
        case 2:
            bacpy(&bdaddr, BDADDR_ANY);
            channel = BT_CHANNEL;
            break;
#endif
        default:
            printf("Wrong number of arguments\n");
            exit(0);
        }

        printf("Using Bluetooth RFCOMM transport\n");
        if(! (handle = OBEX_Init(OBEX_TRANS_BLUETOOTH, obex_event, 0)))      {
            perror( "OBEX_Init failed");
            exit(0);
        }
#else
        printf("Not implemented in Win32 yet.\n");
#endif	// _WIN32
    }
    else if(usbobex) {
#ifdef HAVE_USB
        int i, interfaces_number, intf_num;
        switch (argc) {
        case 2:
            printf("Using USB transport, querying available interfaces\n");
            if(! (handle = OBEX_Init(OBEX_TRANS_USB, obex_event, 0)))      {
                perror( "OBEX_Init failed");
                exit(0);
            }
            interfaces_number = OBEX_FindInterfaces(handle, &obex_intf);
            for (i=0; i < interfaces_number; i++)
                printf("Interface %d: %s %s %s\n", i,
                       obex_intf[i].usb.manufacturer,
                       obex_intf[i].usb.product,
                       obex_intf[i].usb.control_interface);
            printf("Use '%s -u interface_number' to run interactive OBEX test client\n", argv[0]);
            OBEX_Cleanup(handle);
            exit(0);
            break;
        case 3:
            intf_num = atoi(argv[2]);
            printf("Using USB transport \n");
            if(! (handle = OBEX_Init(OBEX_TRANS_USB, obex_event, 0)))      {
                perror( "OBEX_Init failed");
                exit(0);
            }

            interfaces_number = OBEX_FindInterfaces(handle, &obex_intf);
            if (intf_num >= interfaces_number) {
                printf( "Invalid interface number\n");
                exit(0);
            }
            obex_intf += intf_num;

            break;
        default:
            printf("Wrong number of arguments\n");
            exit(0);
        }
#else
        printf("Not compiled with USB support\n");
        exit(0);
#endif
    }
    else	{
        printf("Using IrDA transport\n");
        if(! (handle = OBEX_Init(OBEX_TRANS_IRDA, obex_event, 0)))	{
            perror( "OBEX_Init failed");
            exit(0);
        }
    }

    OBEX_SetUserData(handle, &global_context);

    printf( "OBEX Interactive test client/server.\n");

    while (!end) {
        printf("> ");
        num = scanf("%s", cmd);
        switch (cmd[0] | 0x20)	{
        case 'q':
            end=1;
            break;
        case 'g':
            get_client(handle, &global_context);
            break;
        case 't':
            setpath_client(handle);
            break;
        case 'p':
            put_client(handle);
            break;
        case 'x':
            push_client(handle);
            break;
        case 'c':
            /* First connect transport */
            if(tcpobex) {
                if(TcpOBEX_TransportConnect(handle, NULL, 0) < 0) {
                    printf("Transport connect error! (TCP)\n");
                    break;
                }
            }
            if(cobex) {
                if(OBEX_TransportConnect(handle, (void*) 1, 0) < 0) {
                    printf("Transport connect error! (Serial)\n");
                    break;
                }
            }
            if(btobex) {
#ifdef HAVE_BLUETOOTH
                if (bacmp(&bdaddr, BDADDR_ANY) == 0) {
                    printf("Device address error! (Bluetooth)\n");
                    break;
                }
                if(BtOBEX_TransportConnect(handle, BDADDR_ANY, &bdaddr, channel) <0) {
                    printf("Transport connect error! (Bluetooth)\n");
                    break;
                }
#else
                printf("Transport not found! (Bluetooth)\n");
#endif
            }
            if (usbobex) {
#ifdef HAVE_USB
                if (OBEX_InterfaceConnect(handle, obex_intf) < 0) {
                    printf("Transport connect error! (USB)\n");
                    break;
                }
#else
                printf("Transport not found! (USB)\n");
#endif
            }
            if (!tcpobex && !cobex && !btobex && !usbobex) {
                if(IrOBEX_TransportConnect(handle, IR_SERVICE) < 0) {
                    printf("Transport connect error! (IrDA)\n");
                    break;
                }
            }
            // Now send OBEX-connect.
            connect_client(handle);
            break;
        case 'd':
            disconnect_client(handle);
            break;
        case 's':
            /* First register server */
            if(tcpobex) {
                if(TcpOBEX_ServerRegister(handle, NULL, 0) < 0) {
                    printf("Server register error! (TCP)\n");
                    break;
                }
            }
            if(cobex) {
                if(OBEX_ServerRegister(handle, (void*) 1, 0) < 0) {
                    printf("Server register error! (Serial)\n");
                    break;
                }
            }
            if(btobex) {
#ifdef HAVE_BLUETOOTH
                if(BtOBEX_ServerRegister(handle, BDADDR_ANY, channel) < 0) {
                    printf("Server register error! (Bluetooth)\n");
                    break;
                }
#else
                printf("Transport not found! (Bluetooth)\n");
#endif
            }
            if (usbobex) {
                printf("Transport not found! (USB)\n");
            }
            if (!tcpobex && !cobex && !btobex && !usbobex) {
                if(IrOBEX_ServerRegister(handle, IR_SERVICE) < 0)	{
                    printf("Server register error! (IrDA)\n");
                    break;
                }
            }
            /* No process server events */
            server_do(handle);
            break;
        default:
            printf("Unknown command %s\n", cmd);
        }
    }
#ifndef _WIN32
    if(cobex)
        cobex_close(custfunc.customdata);
#endif

    return 0;
}
Exemplo n.º 3
0
obex_t *smartpen_connect(short vendor, short product)
{
	obex_t *handle;
	obex_object_t *obj;
	int rc, num, i;
	struct obex_state *state;
	obex_interface_t *obex_intf;
	obex_headerdata_t hd;
	int size, count;
	char *buf;

again:
	handle = OBEX_Init(OBEX_TRANS_USB, obex_event, 0);
	if (!handle)
		goto out;

        num = OBEX_FindInterfaces(handle, &obex_intf);
	for (i=0; i<num; i++) {
		if (!strcmp(obex_intf[i].usb.manufacturer, "Livescribe"))
			break;
	}

        if (i == num) {
		printf("No such device\n");
		handle = NULL;
		goto out;
        }

	state = malloc(sizeof(struct obex_state));
	if (!state) {
		handle = NULL;
		goto out;
	}
	memset(state, 0, sizeof(struct obex_state));

	swizzle_usb(vendor, product);

        rc = OBEX_InterfaceConnect(handle, &obex_intf[i]);
        if (rc < 0) {
		printf("Connect failed %d\n", rc);
		handle = NULL;
		goto out;
	}

        OBEX_SetUserData(handle, state);
        OBEX_SetTransportMTU(handle, 0x400, 0x400);

        obj = OBEX_ObjectNew(handle, OBEX_CMD_CONNECT);
        hd.bs = (unsigned char *)"LivescribeService";
        size = strlen((char*)hd.bs)+1;
        OBEX_ObjectAddHeader(handle, obj, OBEX_HDR_TARGET, hd, size, 0);

        rc = OBEX_Request(handle, obj);

	count = state->req_done;
        while (rc == 0 && state->req_done <= count) {
            OBEX_HandleInput(handle, 100);
        }

	if (rc < 0 || !state->got_connid) {
		printf("Retry connection...\n");
		OBEX_Cleanup(handle);
		goto again;
	}

	buf = get_named_object(handle, "ppdata?key=pp0000", &rc);
	if (!buf) {
		printf("Retry connection...\n");
		OBEX_Cleanup(handle);
		pen_reset(vendor, product);
		goto again;
	}

out:
	return handle;
}