void kmain (void)
{
cpu = &cpus[0];
uart_init (P2V(UART0));
init_vmm ();
kpt_freerange (align_up(&end, PT_SZ), P2V_WO(INIT_KERNMAP));
paging_init (INIT_KERNMAP, PHYSTOP);
kmem_init ();
kmem_init2(P2V(INIT_KERNMAP), P2V(PHYSTOP));
trap_init (); // vector table and stacks for models
gic_init(P2V(VIC_BASE)); // arm v2 gic init
uart_enable_rx (); // interrupt for uart
consoleinit (); // console
pinit (); // process (locks)
binit (); // buffer cache
fileinit (); // file table
iinit (); // inode cache
ideinit (); // ide (memory block device)
#ifdef INCLUDE_REMOVED
timer_init (HZ); // the timer (ticker)
#endif
sti ();
userinit(); // first user process
scheduler(); // start running processes
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
monitor_clear ();
// Print basic system information.
cprintf ("Ensidia\n\n");
cprintf ("Copyright (c) 2013-2014 Fotis Koutoulakis\n");
cprintf ("Based on xv6 by Russ Cox et al, at MIT CSAIL\n");
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xng kernel\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
lapicinit(); // interrupt controller
seginit(); // segment descriptors
cprintf("\ncpu%d: starting xv6\n\n", cpunum());
picinit(); // another interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // console hardware
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
init_semaphores_on_boot();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator // kmem. freelist added
cprintf("%x \n", end);
kvmalloc(); // kernel page table
#ifdef CONFIG_MULTI_PROCESS
mpinit(); // collect info about this machine
#endif
lapicinit();
seginit(); // set up segments
picinit(); // interrupt controller: Programmable Interrupt Controller
#ifdef CONFIG_MULTI_PROCESS
ioapicinit(); // another interrupt controller
#endif
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
#ifdef CONFIG_MULTI_PROCESS
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
#endif
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
unsigned char FB[]="MESSAGE WRITTEN THROUGH FRAMEBUFFER!!";
fb_init(); // initialize framebuffer device (2015.11.02)
cprintf("\nUsing Framebuffer still presents some problems :(\n\n");
cprintf("\nSuggestion: review the way it is used in console.c\n\n");
fb_write(FB, sizeof(FB)); // Framebuffer maybe could be used before this moment (2015.11.02)
see_mylock(MYLOCK);
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
/*int main(void){*/
void kmain(void){
// vga_init();
// puts((uint8_t*)"Hello kernel world!\n");
/*do some work here, like initialize timer or paging*/
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
// gdt_descriptor();
// puts((uint8_t*)"GDT initialized...\n");
// idt_descriptor();
// puts((uint8_t*)"IDT initialized...\n");
// cprintf("IDT initialized...\n");
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
initGraphMode();
initDom();
tryOnce();
toggleOn();
pinit(); // process table
toggleOn();
tvinit(); // trap vectors
toggleOn();
binit(); // buffer cache
toggleOn();
fileinit(); // file table
toggleOn();
iinit(); // inode cache
toggleOn();
ideinit(); // disk
toggleOn();
if(!ismp)
timerinit(); // uniprocessor timer
toggleOn();
startothers(); // start other processors
toggleOn();
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
toggleOn();
txt_initLock();
mouseEnable();
initProcessMsgMap();
userinit(); // first user process
toggleOn();
endToggle();
// Finish setting up this processor in mpmain.
mpmain();
}
// Start the non-boot (AP) processors.
static void
startothers(void)
{
extern uchar _binary_entryother_start[], _binary_entryother_size[];
uchar *code;
struct cpu *c;
char *stack;
// Write entry code to unused memory at 0x7000.
// The linker has placed the image of entryother.S in
// _binary_entryother_start.
code = P2V(0x7000);
memmove(code, _binary_entryother_start, (uint)_binary_entryother_size);
for(c = cpus; c < cpus+ncpu; c++){
if(c == cpus+cpunum()) // We've started already.
continue;
// Tell entryother.S what stack to use, where to enter, and what
// pgdir to use. We cannot use kpgdir yet, because the AP processor
// is running in low memory, so we use entrypgdir for the APs too.
stack = kalloc();
*(void**)(code-4) = stack + KSTACKSIZE;
*(void**)(code-8) = mpenter;
*(int**)(code-12) = (void *) V2P(entrypgdir);
lapicstartap(c->apicid, V2P(code));
// wait for cpu to finish mpmain()
while(c->started == 0)
;
}
}
// Start additional processor running entry code at addr.
// See Appendix B of MultiProcessor Specification.
void
lapicstartap(uchar apicid, uint addr)
{
int i;
ushort *wrv;
// "The BSP must initialize CMOS shutdown code to 0AH
// and the warm reset vector (DWORD based at 40:67) to point at
// the AP startup code prior to the [universal startup algorithm]."
outb(CMOS_PORT, 0xF); // offset 0xF is shutdown code
outb(CMOS_PORT+1, 0x0A);
wrv = (ushort*)P2V((0x40<<4 | 0x67)); // Warm reset vector
wrv[0] = 0;
wrv[1] = addr >> 4;
// "Universal startup algorithm."
// Send INIT (level-triggered) interrupt to reset other CPU.
lapicw(ICRHI, apicid<<24);
lapicw(ICRLO, INIT | LEVEL | ASSERT);
microdelay(200);
lapicw(ICRLO, INIT | LEVEL);
microdelay(100); // should be 10ms, but too slow in Bochs!
// Send startup IPI (twice!) to enter code.
// Regular hardware is supposed to only accept a STARTUP
// when it is in the halted state due to an INIT. So the second
// should be ignored, but it is part of the official Intel algorithm.
// Bochs complains about the second one. Too bad for Bochs.
for(i = 0; i < 2; i++){
lapicw(ICRHI, apicid<<24);
lapicw(ICRLO, STARTUP | (addr>>12));
microdelay(200);
}
}
size_t frame_alloc_mult_contig(uintptr_t* frames, size_t num)
{
/* Iterate over all the frames */
for(uint32_t i = 0; i < 131072; ++i) {
if(frame_get(i * 0x1000) == 0) {
uint8_t enough = TRUE;
for(uint32_t j = 0; j < num; ++j) {
if(frame_get(i + j * 0x1000) == 1) {
enough = FALSE;
break;
}
}
if(enough == TRUE) {
for(uint32_t j = 0; j < num; ++j) {
frame_set(i + j * 0x1000, 1);
frames[j] = P2V(i + j * 0x1000);
}
return num;
}
}
}
return 0;
}
// Given a parent process's page table, create a copy
// of it for a child.
pde_t*
copyuvm(pde_t *pgdir, uint sz)
{
pde_t *d;
pte_t *pte;
uint pa, i, flags;
char *mem;
if((d = setupkvm()) == 0)
return 0;
for(i = 0; i < sz; i += PGSIZE){
if((pte = walkpgdir(pgdir, (void *) i, 0)) == 0)
panic("copyuvm: pte should exist");
if(!(*pte & PTE_P))
panic("copyuvm: page not present");
pa = PTE_ADDR(*pte);
flags = PTE_FLAGS(*pte);
if((mem = kalloc()) == 0)
goto bad;
memmove(mem, (char*)P2V(pa), PGSIZE);
if(mappages(d, (void*)i, PGSIZE, V2P(mem), flags) < 0)
goto bad;
}
return d;
bad:
freevm(d);
return 0;
}
// Deallocate user pages to bring the process size from oldsz to
// newsz. oldsz and newsz need not be page-aligned, nor does newsz
// need to be less than oldsz. oldsz can be larger than the actual
// process size. Returns the new process size.
int
deallocuvm(pde_t *pgdir, uint oldsz, uint newsz)
{
pte_t *pte;
uint a, pa;
if(newsz >= oldsz)
return oldsz;
a = PGROUNDUP(newsz);
for(; a < oldsz; a += PGSIZE){
pte = walkpgdir(pgdir, (char*)a, 0);
if(!pte)
a += (NPTENTRIES - 1) * PGSIZE;
else if((*pte & PTE_P) != 0){
pa = PTE_ADDR(*pte);
if(pa == 0)
panic("kfree");
char *v = P2V(pa);
kfree(v);
*pte = 0;
}
}
return newsz;
}
// Os procedimentos de inicialização começam a executar o
// código .C a partir daqui.
// Aloca uma pilha real e troca para ela, primeiro fazendo
// algumas configurações necessárias par o alocador de memória funcionar.
int main(void) {
kinit1(end, P2V(4*1024*1024)); // alocador de páginas de memória física
kvmalloc(); // tabela de páginas do kernel
mpinit(); // detecta outros processadores
lapicinit(); // controlador de interrupções
seginit(); // descritores de segmentos
picinit(); // desabilita pic
ioapicinit(); // outro controlador de interrupções
consoleinit(); // console hardware
uartinit(); // porta serial
pinit(); // tabela de processos
tvinit(); // vetores trap
binit(); // buffer cache
fileinit(); // tabela de arquivo
ideinit(); // disco
startothers(); // inicia outros processadores
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // deve vir após startothers()
userinit(); // primeiro processo no modo usuário
mpmain(); // encerra esta configuração de processadores
}
static void kpt_free (char *v)
{
if (v >= (char*)P2V(INIT_KERNMAP)) {
kfree(v, PT_ORDER);
return;
}
acquire(&kpt_mem.lock);
_kpt_free (v);
release(&kpt_mem.lock);
}
//PAGEBREAK!
// Map user virtual address to kernel address.
char*
uva2ka(pde_t *pgdir, char *uva)
{
pte_t *pte;
pte = walkpgdir(pgdir, uva, 0);
if((*pte & PTE_P) == 0)
return 0;
if((*pte & PTE_U) == 0)
return 0;
return (char*)P2V(PTE_ADDR(*pte));
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
lapicinit(); // interrupt controller
seginit(); // segment descriptors
picinit(); // disable pic
ioapicinit(); // another interrupt controller
consoleinit(); // console hardware
uartinit(); // serial port
pinit(); // process table
shminit(); // shared memory
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
}
// Free a page table and all the physical memory pages
// in the user part.
void
freevm(pde_t *pgdir)
{
uint i;
if(pgdir == 0)
panic("freevm: no pgdir");
deallocuvm(pgdir, KERNBASE, 0);
for(i = 0; i < NPDENTRIES; i++){
if(pgdir[i] & PTE_P){
char * v = P2V(PTE_ADDR(pgdir[i]));
kfree(v);
}
}
kfree((char*)pgdir);
}
// Allocate one 4096-byte page of physical memory.
// Returns a pointer that the kernel can use.
// Returns 0 if the memory cannot be allocated.
char*
kalloc(void)
{
struct run *r;
char *rv;
if(kmem.use_lock)
acquire(&kmem.lock);
r = kmem.freelist;
if(r)
kmem.freelist = r->next;
if(kmem.use_lock)
release(&kmem.lock);
rv = P2V((r - kmem.runs) * PGSIZE);
return rv;
}
// Set up kernel part of a page table.
pde_t*
setupkvm(void)
{
pde_t *pgdir;
struct kmap *k;
if((pgdir = (pde_t*)kalloc()) == 0)
return 0;
memset(pgdir, 0, PGSIZE);
if(P2V(PHYSTOP) > (void*)DEVSPACE)
panic("setupkvm: PHYSTOP too high");
for(k = kmap; k < &kmap[NELEM(kmap)]; k++)
if(mappages(pgdir, k->virt, k->phys_end - k->phys_start,
(uint)k->phys_start, k->perm) < 0)
return 0;
return pgdir;
}
void e1000_received(struct e1000 *e)
{
struct sockbuf *sb;
uint16_t old_cur;
while((e->rx_descs[e->rx_cur]->status & 0x1))
{
uint8_t *buf = (void *)(uintptr_t)P2V(e->rx_descs[e->rx_cur]->addr);
uint16_t len = e->rx_descs[e->rx_cur]->length;
sb = sockbuf_alloc(e->dev, len);
kmemcpy(sb->data, buf, len);
network_received(sb);
e->rx_descs[e->rx_cur]->status = 0;
old_cur = e->rx_cur;
e->rx_cur = (e->rx_cur + 1) % NUM_RX_DESC;
e1000_outl(e, REG_RXDESCTAIL, old_cur ) ;
}
}
// Search for the MP Floating Pointer Structure, which according to the
// spec is in one of the following three locations:
// 1) in the first KB of the EBDA;
// 2) in the last KB of system base memory;
// 3) in the BIOS ROM between 0xE0000 and 0xFFFFF.
static struct mp*
mpsearch(void)
{
uchar *bda;
uint p;
struct mp *mp;
bda = (uchar *) P2V(0x400);
if((p = ((bda[0x0F]<<8)| bda[0x0E]) << 4)){
if((mp = mpsearch1(p, 1024)))
return mp;
} else {
p = ((bda[0x14]<<8)|bda[0x13])*1024;
if((mp = mpsearch1(p-1024, 1024)))
return mp;
}
return mpsearch1(0xF0000, 0x10000);
}
struct network_dev * rtl8139_init()
{
struct network_dev *device = kmalloc(sizeof(*device));
struct rtl8139 *rtl = (struct rtl8139 *)kmalloc(sizeof(*rtl));
global = rtl;
device->device = rtl;
rtl->dev = device;
rtl->pci = pci_get_device(RTL8139_VEND, RTL8139_DEV);
rtl->rx_buffer = pallocn(2);//kmalloc(RX_BUF_LEN + RX_BUF_PAD);
//FIXME: Wat Wat Wat
rtl->tx_buffers = (void *)P2V(0x3380000);//kmalloc((8192+16+1500)*4);
if(rtl->pci != NULL)
{
rtl->pci_hdr = rtl->pci->header;
rtl->io_base = pci_get_bar(rtl->pci, PCI_BAR_IO) & ~1;
rtl->mem_base = (uint8_t *)(pci_get_bar(rtl->pci, PCI_BAR_MEM) & ~3);
rtl8139_start(rtl);
rtl8139_getmac(rtl,(char *)&device->mac);
device->send = rtl8139_send;
printf("Realtek 8139 Ethernet adapter Rev %i found\t", rtl->pci_hdr->rev);
printf("io base %x ",rtl->io_base);
printf("mem base %x\n",rtl->mem_base);
// device->receive = rtl8139_receive;
print_mac((char *)&device->mac);
printf("%X\n",rtl->dev);
}
else
{
kfree(rtl->rx_buffer);
kfree(rtl);
rtl = NULL;
device = NULL;
}
return device;
}
// Return the address of the PTE in page table pgdir
// that corresponds to virtual address va. If alloc!=0,
// create any required page table pages.
static pte_t *
walkpgdir(pde_t *pgdir, const void *va, int alloc)
{
pde_t *pde;
pte_t *pgtab;
pde = &pgdir[PDX(va)];
if(*pde & PTE_P){
pgtab = (pte_t*)P2V(PTE_ADDR(*pde));
} else {
if(!alloc || (pgtab = (pte_t*)kalloc()) == 0)
return 0;
// Make sure all those PTE_P bits are zero.
memset(pgtab, 0, PGSIZE);
// The permissions here are overly generous, but they can
// be further restricted by the permissions in the page table
// entries, if necessary.
*pde = V2P(pgtab) | PTE_P | PTE_W | PTE_U;
}
return &pgtab[PTX(va)];
}
// Load a program segment into pgdir. addr must be page-aligned
// and the pages from addr to addr+sz must already be mapped.
int
loaduvm(pde_t *pgdir, char *addr, struct inode *ip, uint offset, uint sz)
{
uint i, pa, n;
pte_t *pte;
if((uint) addr % PGSIZE != 0)
panic("loaduvm: addr must be page aligned");
for(i = 0; i < sz; i += PGSIZE){
if((pte = walkpgdir(pgdir, addr+i, 0)) == 0)
panic("loaduvm: address should exist");
pa = PTE_ADDR(*pte);
if(sz - i < PGSIZE)
n = sz - i;
else
n = PGSIZE;
if(readi(ip, P2V(pa), offset+i, n) != n)
return -1;
}
return 0;
}
int8_t frame_alloc_aligned(uintptr_t* frame, uint32_t alignment)
{
uint32_t mask = alignment - 1;
/* Iterate over all the frames */
for(uint32_t i = 0; i < 4096; ++i) {
if(frames_bitmap[i] ^ 0xFFFFFFFF) {
/* There's a free frame here */
/* For each bit in this part of the bitmap */
for(uintptr_t f = i * 32 * 0x1000; f < (i+1) * 32 * 0x1000; f += 0x1000) {
/* If the frame is free */
if(0 == frame_get(f) && (f & mask) == 0) {
frame_set(f, 1);
*frame = P2V(f);
return 0;
}
}
}
}
return -ENOMEM;
}
int display_vga()
{
// set processor to vga mode
struct regs16 regs = { .ax = 0x13};
pushcli();
pte_t original = biosmap();
int32(0x10, ®s);
#if MODE_UNCHAINED
display_unchained();
#endif
biosunmap(original);
popcli();
return 0;
}
int display_draw()
{
static int page = 0;
char* page_addr = (char *)P2V(0xA0000 + page*FRAME_PIX);
// move current buffer to non-visible page
#if MODE_UNCHAINED
int i;
outb(SC_INDEX, MAP_MASK);
for (i = 0; i < 4; i++)
{
outb(SC_DATA, 1 << i);
memmove(page_addr, frame_buffer[i], FRAME_PIX);
}
short flip_addr = page*FRAME_PIX;
// flip pages
short high_addr = HIGH_ADDRESS | (flip_addr & 0xff00);
short low_addr = LOW_ADDRESS | (flip_addr << 8);
#ifdef VERTICAL_RETRACE
while ((inb(INPUT_STATUS_1) & DISPLAY_ENABLE));
#endif
outw(CRTC_INDEX, high_addr);
outw(CRTC_INDEX, low_addr);
#ifdef VERTICAL_RETRACE
while (!(inb(INPUT_STATUS_1) & VRETRACE));
#endif
// use the other page next time
page = (page+1)%2;
#else
memmove(page_addr, frame_buffer, SCREEN_PIX);
#endif
return 0;
}
int display_text()
{
// set processor to text mode
struct regs16 regs = { .ax = 0x03};
pushcli();
pte_t original = biosmap();
int32(0x10, ®s);
biosunmap(original);
popcli();
return 0;
}
/*
* map_ioctl:
* process the supported ioctls
*/
static int map_ioctl(RP rp)
{
PARAM far *p = (PARAM far*)IOPARAM(rp);
DATA far *d;
int idx;
ULONG addr, lock, temp;
ULONG far *ud;
/* only accept class XFREE86_PMAP */
if (IOCAT(rp) != XFREE86_PMAP)
return RP_EBAD;
switch (IOFUNC(rp)) {
case PMAP_MAP:
/* test: Parameter packet is readable and has correct size
* get a free slot
*/
if (Verify(p,sizeof(PARAM),0)==0 &&
(idx = find_empty()) != -1) {
/* map the requested region */
addr = Pmap(p->u.physaddr,p->size);
/* was okay? */
if (addr) {
/* get the return packet of ioctl */
d = (DATA far*)IODATA(rp);
/* writable ? */
if (Verify(d,sizeof(DATA),1)==0) {
/* set the mapping address in
* process address space
*/
d->addr = addr;
d->sel = 0;
/* registrate stuff in mapping table */
maps[idx].phys = p->u.physaddr;
maps[idx].vmaddr = addr;
maps[idx].sfnum = IOSFN(rp);
maps[idx].lockhan = 0;
return RPDONE;
}
}
}
/* come here for error condition */
break;
case PMAP_UNMAP:
/* test: parameter packet readable and correct size
* entry found in table
* unmapping okay?
*/
if (Verify(p,sizeof(PARAM),0)==0 &&
(idx = find_map(IOSFN(rp),p->u.vmaddr)) != -1 &&
Punmap(p->u.vmaddr)==0) {
/* get the return packet of ioctl */
ud = (ULONG far*)IODATA(rp);
/* writable ? */
if (Verify(d,sizeof(ULONG),1)==0) {
/* set the vmaddress just invalidated
* into data packet
*/
*ud = maps[idx].vmaddr;
/* remove entry from table */
maps[idx].phys = 0;
maps[idx].vmaddr = 0;
maps[idx].sfnum = -1;
maps[idx].lockhan = 0;
return RPDONE;
}
}
/* arrive here for error condition */
break;
case PMAP_UNMAP2:
/* test: parameter packet readable and correct size
* entry found in table
* unmapping okay?
*/
if (Verify(p,sizeof(PARAM),0)==0 &&
(idx = find_mapphys(IOSFN(rp),p->u.physaddr,p->size)) != -1 &&
Punmap(maps[idx].vmaddr)==0) {
/* remove entry from table */
maps[idx].phys = 0;
maps[idx].vmaddr = 0;
maps[idx].sfnum = -1;
maps[idx].lockhan = 0;
return RPDONE;
}
/* arrive here for error condition */
break;
case PMAP_NAME:
if (Verify(d,14,1) == 0) {
bmove((char far*)d,"\\dev\\pmap$\0",11);
return RPDONE;
}
break;
case PMAP_DRVID:
return drvid(d,IODLEN(rp),PMAPDRV_ID);
case PMAP_READROM: /* testcfg.sys replacement function */
if (Verify(p,sizeof(ROMPARAM),0) == 0) {
ROMPARAM far *p1 = (ROMPARAM*)p;
USHORT n = p1->numbytes;
ULONG ad = p1->physaddr + n;
if (p1->command == 0 &&
p1->physaddr >= 0xc0000 &&
p1->physaddr <= 0xfffff &&
ad >= 0xc0000 &&
ad <= 0xfffff) {
char far *d1 = (char far*)IODATA(rp);
if (Verify(d1,n,1) == 0) {
char far *addr;
if (P2V(p1->physaddr,n,&addr)==0) {
bmove(d1,addr,n);
/*UnPhysToVirt == NOOP in OS/2 2.x */
return RPDONE;
}
}
}
}
break;
case PMAP_LOCKBUF:
/* test: Parameter packet is readable and has correct size
*
*/
lock = 0;
if (Verify(p,sizeof(PARAM),0)==0 &&
(idx = find_empty()) != -1) {
/* lock the requested region */
lock = Vlock(p->u.vmaddr,p->size);
temp = (p->u.vmaddr << 3) | 0x070000; /* Make sel */
/* was okay? */
if ((lock) &&
(Verify((FPVOID)temp, (USHORT)p->size, 0) ==0)) {
/* get the return packet of ioctl */
d = (DATA far*)IODATA(rp);
/* writable ? */
if (Verify(d,sizeof(DATA),1)==0) {
/* set the mapping address in
* process address space
*/
/* This is where things crash: VtoP does not like our addr */
d->addr = VtoP(p->u.vmaddr);
d->sel = 0;
maps[idx].phys = addr;
maps[idx].vmaddr = p->u.vmaddr;
maps[idx].sfnum = IOSFN(rp);
maps[idx].lockhan = lock;
return RPDONE;
}
}
if(lock) Vunlock(lock); /* In case Verify failed */
}
/* come here for error condition */
break;
default:
return RP_EBAD;
}
/* break from case */
return RP_EINVAL;
}
getcallerpcs(&s, pcs);
for(i=0; i<10; i++)
cprintf(" %p", pcs[i]);
panicked = 1; // freeze other CPU
for(;;)
;
}
//PAGEBREAK: 50
#define BACKSPACE 0x100
#define CRTPORT 0x3d4
#define KEY_LF 0xE4
#define KEY_RT 0xE5
#define KEY_UP 0xE2
#define KEY_DN 0xE3
static ushort *crt = (ushort*)P2V(0xb8000); // CGA memory
static void
cgaputc(int c)
{
int pos;
// Cursor position: col + 80*row.
outb(CRTPORT, 14);
pos = inb(CRTPORT+1) << 8;
outb(CRTPORT, 15);
pos |= inb(CRTPORT+1);
if(c == '\n')
pos += 80 - pos%80;
else if(c==KEY_RT)
void uart_send(const char c)
{
__REG(P2V(UART0)) = c;
if(c == '\n')
__REG(P2V(UART0)) = '\r';
}
