Exemplo n.º 1
0
int zynq_pll_init(void) {
    zynq_slcr_unlock();

    /* ARM PLL & Clock config
     * 375 cycles needed for pll
     * 26 divisor on pll
     * enable all ARM clocks
     * 2 divisor on ARM clocks
     * ARM clock source is ARM PLL
     */
    SLCR_REG(ARM_PLL_CFG)  = PLL_CFG_LOCK_CNT(375) | PLL_CFG_PLL_CP(2) | PLL_CFG_PLL_RES(12);
    SLCR_REG(ARM_PLL_CTRL) = PLL_FDIV(26) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(ARM_PLL_CTRL) &= ~PLL_RESET;

    if (pll_poll(PLL_STATUS_ARM_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(ARM_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    SLCR_REG(ARM_CLK_CTRL) = ARM_CLK_CTRL_DIVISOR(2) | ARM_CLK_CTRL_CPU_6OR4XCLKACT |
                             ARM_CLK_CTRL_CPU_3OR2XCLKACT | ARM_CLK_CTRL_CPU_2XCLKACT |
                             ARM_CLK_CTRL_CPU_1XCLKACT |ARM_CLK_CTRL_PERI_CLKACT;

    /* DDR PLL & Clock config
     * 475 cycles needed
     * 21 divisor on PLL
     * enable all DDR clocks
     * 2 divisor for 3XCLK, 3 divisor for 2XCLK
     */
    SLCR_REG(DDR_PLL_CFG)  = PLL_CFG_LOCK_CNT(475) | PLL_CFG_PLL_CP(2) | PLL_CFG_PLL_RES(12);
    SLCR_REG(DDR_PLL_CTRL) = PLL_FDIV(26) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(DDR_PLL_CTRL) &= ~PLL_RESET;

    if (pll_poll(PLL_STATUS_DDR_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(DDR_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    SLCR_REG(DDR_CLK_CTRL) = DDR_CLK_CTRL_DDR_3XCLKACT | DDR_CLK_CTRL_DDR_2XCLKACT |
                             DDR_CLK_CTRL_DDR_3XCLK_DIV(2) | DDR_CLK_CTRL_DDR_2XCLK_DIV(3);

    /* IO PLL config
     * 500 cycles needed for pll
     * 20 divisor
     */
    SLCR_REG(IO_PLL_CFG)  = PLL_CFG_LOCK_CNT(500) | PLL_CFG_PLL_CP(2) | PLL_CFG_PLL_RES(12);
    SLCR_REG(IO_PLL_CTRL) = PLL_FDIV(20) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(IO_PLL_CTRL) &= ~PLL_RESET;

    if (pll_poll(PLL_STATUS_IO_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(IO_PLL_CTRL) &= ~PLL_BYPASS_FORCE;

    zynq_slcr_lock();
    return 0;
}
Exemplo n.º 2
0
/* For each PLL we need to configure the cp / res / lock_cnt and then place the PLL in bypass
 * before doing a reset to switch to the new values. Then bypass is removed to switch back to using
 * the PLL once its locked.
 */
int zynq_pll_init(void) {
    const zynq_pll_cfg_tree_t *cfg = &zynq_pll_cfg;

    SLCR_REG(ARM_PLL_CFG)  = PLL_CFG_LOCK_CNT(cfg->arm.lock_cnt) | PLL_CFG_PLL_CP(cfg->arm.cp) |
                                PLL_CFG_PLL_RES(cfg->arm.res);
    SLCR_REG(ARM_PLL_CTRL) = PLL_FDIV(cfg->arm.fdiv) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(ARM_PLL_CTRL) &= ~PLL_RESET;

    if (reg_poll((uintptr_t)&SLCR->PLL_STATUS, PLL_STATUS_ARM_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(ARM_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    SLCR_REG(ARM_CLK_CTRL) = zynq_clk_cfg.arm_clk;

#if ZYNQ_SDRAM_INIT
    SLCR_REG(DDR_PLL_CFG)  = PLL_CFG_LOCK_CNT(cfg->ddr.lock_cnt) | PLL_CFG_PLL_CP(cfg->ddr.cp) |
                                PLL_CFG_PLL_RES(cfg->ddr.res);
    SLCR_REG(DDR_PLL_CTRL) = PLL_FDIV(cfg->ddr.fdiv) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(DDR_PLL_CTRL) &= ~PLL_RESET;

    if (reg_poll((uintptr_t)&SLCR->PLL_STATUS, PLL_STATUS_DDR_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(DDR_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    SLCR_REG(DDR_CLK_CTRL) = zynq_clk_cfg.ddr_clk;
#elif SDRAM_SIZE == 0
    /* if we're not using sdram and haven't been told to initialize sdram, stop the DDR pll */
    SLCR_REG(DDR_CLK_CTRL) = 0;
    SLCR_REG(DDR_PLL_CTRL) |= PLL_PWRDOWN;
#endif
    SLCR_REG(IO_PLL_CFG)  = PLL_CFG_LOCK_CNT(cfg->io.lock_cnt) | PLL_CFG_PLL_CP(cfg->io.cp) |
                                PLL_CFG_PLL_RES(cfg->io.res);
    SLCR_REG(IO_PLL_CTRL) = PLL_FDIV(cfg->io.fdiv) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(IO_PLL_CTRL) &= ~PLL_RESET;

    if (reg_poll((uintptr_t)&SLCR->PLL_STATUS, PLL_STATUS_IO_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(IO_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    return 0;
}
Exemplo n.º 3
0
/* For each PLL we need to configure the cp / res / lock_cnt and then place the PLL in bypass
 * before doing a reset to switch to the new values. Then bypass is removed to switch back to using
 * the PLL once its locked.
 */
int zynq_pll_init(void) {
    const zynq_pll_cfg_tree_t *cfg = &zynq_pll_cfg;

    zynq_slcr_unlock();
    SLCR_REG(ARM_PLL_CFG)  = PLL_CFG_LOCK_CNT(cfg->arm.lock_cnt) | PLL_CFG_PLL_CP(cfg->arm.cp) |
                                PLL_CFG_PLL_RES(cfg->arm.res);
    SLCR_REG(ARM_PLL_CTRL) = PLL_FDIV(cfg->arm.fdiv) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(ARM_PLL_CTRL) &= ~PLL_RESET;

    if (reg_poll((uintptr_t)&SLCR->PLL_STATUS, PLL_STATUS_ARM_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(ARM_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    SLCR_REG(ARM_CLK_CTRL) = zynq_clk_cfg.arm_clk;

#if ZYNQ_SDRAM_INIT
    SLCR_REG(DDR_PLL_CFG)  = PLL_CFG_LOCK_CNT(cfg->ddr.lock_cnt) | PLL_CFG_PLL_CP(cfg->ddr.cp) |
                                PLL_CFG_PLL_RES(cfg->ddr.res);
    SLCR_REG(DDR_PLL_CTRL) = PLL_FDIV(cfg->ddr.fdiv) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(DDR_PLL_CTRL) &= ~PLL_RESET;

    if (reg_poll((uintptr_t)&SLCR->PLL_STATUS, PLL_STATUS_DDR_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(DDR_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    SLCR_REG(DDR_CLK_CTRL) = zynq_clk_cfg.ddr_clk;
#endif
    SLCR_REG(IO_PLL_CFG)  = PLL_CFG_LOCK_CNT(cfg->io.lock_cnt) | PLL_CFG_PLL_CP(cfg->io.cp) |
                                PLL_CFG_PLL_RES(cfg->io.res);
    SLCR_REG(IO_PLL_CTRL) = PLL_FDIV(cfg->io.fdiv) | PLL_BYPASS_FORCE | PLL_RESET;
    SLCR_REG(IO_PLL_CTRL) &= ~PLL_RESET;

    if (reg_poll((uintptr_t)&SLCR->PLL_STATUS, PLL_STATUS_IO_PLL_LOCK) == -1) {
        return -1;
    }

    SLCR_REG(IO_PLL_CTRL) &= ~PLL_BYPASS_FORCE;
    zynq_slcr_lock();
    return 0;
}