ezResult ezTexConv2::ParseCommandLine()
{
auto* pCmd = ezCommandLineUtils::GetGlobalInstance();
if (pCmd->GetBoolOption("-help") || pCmd->GetBoolOption("--help") || pCmd->GetBoolOption("-h"))
{
ezLog::Info("ezTexConv Help:");
ezLog::Info("");
ezLog::Info(" -out \"File.ext\"");
ezLog::Info(" Absolute path to main output file");
ezLog::Info(" ext = tga, dds, ezTexture2D, ezTexture3D, ezTextureCube or ezTextureAtlas.");
ezLog::Info("");
ezLog::Info(" -inX \"File\"");
ezLog::Info(" Specifies input image X.");
ezLog::Info(" X = 0 .. 63, e.g. -in0, -in1, etc.");
ezLog::Info(" If X is not given, X equals 0.");
ezLog::Info("");
ezLog::Info(" -r / -rg / -rgb / -rgba inX.rgba");
ezLog::Info(" Specifies how many output channels are used (1 - 4) and from which input image to take the data.");
ezLog::Info(" Examples:");
ezLog::Info(" -rgba in0 -> Output has 4 channels, all taken from input image 0.");
ezLog::Info(" -rgb in0 -> Output has 3 channels, all taken from input image 0.");
ezLog::Info(" -rgb in0 -a in1.r -> Output has 4 channels, RGB taken from input image 0 (RGB) Alpha taken from input 1 (Red).");
ezLog::Info(" -rgb in0.bgr -> Output has 3 channels, taken from image 0 and swapped blue and red.");
ezLog::Info(" -r in0.r -g in1.r -b in2.r -a in3.r -> Output has 4 channels, each one taken from another input image (Red).");
ezLog::Info(" -rgb0 in0 -rgb1 in1 -rgb2 in2 -rgb3 in3 -rgb4 in4 -rgb5 in5 -> Output has 3 channels and six faces (-type Cubemap), built from 6 images.");
ezLog::Info("");
ezLog::Info(" -thumbnailOut \"File.ext\"");
ezLog::Info(" Absolute path to 2D thumbnail file.");
ezLog::Info(" ext = tga, jpg, png");
ezLog::Info(" -thumbnailRes Number");
ezLog::Info(" Thumbnail resolution. Should be a power-of-two.");
ezLog::Info("");
ezLog::Info(" -lowOut \"File.ext\"");
ezLog::Info(" Absolute path to low-resolution output file.");
ezLog::Info(" ext = Same as main output");
ezLog::Info(" -lowMips Number");
ezLog::Info(" Number of mipmaps to use from main result as low-res data.");
ezLog::Info("");
PrintOptionValuesHelp(" -type", m_AllowedOutputTypes);
ezLog::Info(" The type of output to generate.");
ezLog::Info("");
ezLog::Info(" -assetVersion Number");
ezLog::Info(" Asset version number to embed in ez specific output formats.");
ezLog::Info(" -assetHashLow 0xHEX_VALUE / -assetHashHigh 0xHEX_VALUE");
ezLog::Info(" Low and high part of a 64 bit asset hash value.");
ezLog::Info(" Required to be non-zero when using ez specific output formats.");
ezLog::Info("");
PrintOptionValuesHelp(" -compression", m_AllowedCompressionModes);
ezLog::Info(" Compression strength for output format.");
ezLog::Info("");
PrintOptionValuesHelp(" -usage", m_AllowedUsages);
ezLog::Info(" What type of data the image contains. Affects which final output format is used and how mipmaps are generated.");
ezLog::Info("");
PrintOptionValuesHelp(" -mipmaps", m_AllowedMimapModes);
ezLog::Info(" Whether to generate mipmaps and with which algorithm.");
ezLog::Info(" -mipsPerserveCoverage");
ezLog::Info(" Whether to preserve alpha-coverage in mipmaps for alpha-tested geometry.");
ezLog::Info(" -mipsAlphaThreshold float [0; 1]");
ezLog::Info(" Alpha threshold used by renderer for alpha-testing, when alpha-coverage should be preserved.");
ezLog::Info("");
PrintOptionValuesHelp(" -addressU/V/W", m_AllowedWrapModes);
ezLog::Info(" Which texture address mode to use along U/V/W. Only supported by ez-specific output formats.");
PrintOptionValuesHelp(" -filter", m_AllowedFilterModes);
ezLog::Info(" Which texture filter mode to use at runtime. Only supported by ez-specific output formats.");
ezLog::Info("");
ezLog::Info(" -minRes / -maxRes Number");
ezLog::Info(" The minimum and maximum resolution allowed for the output.");
ezLog::Info(" -downscale Number");
ezLog::Info(" How often to half the input texture resolution.");
ezLog::Info("");
ezLog::Info(" -flip_horz");
ezLog::Info(" Whether to flip the output horizontally.");
ezLog::Info(" -premulalpha");
ezLog::Info(" Whether to multiply the alpha channel into the RGB channels.");
ezLog::Info(" -hdrExposure float [-20;+20]");
ezLog::Info(" For scaling HDR image brightness up or down.");
return EZ_FAILURE;
}
EZ_SUCCEED_OR_RETURN(ParseOutputFiles());
EZ_SUCCEED_OR_RETURN(DetectOutputFormat());
EZ_SUCCEED_OR_RETURN(ParseOutputType());
EZ_SUCCEED_OR_RETURN(ParseAssetHeader());
EZ_SUCCEED_OR_RETURN(ParseTargetPlatform());
EZ_SUCCEED_OR_RETURN(ParseCompressionMode());
EZ_SUCCEED_OR_RETURN(ParseUsage());
EZ_SUCCEED_OR_RETURN(ParseMipmapMode());
EZ_SUCCEED_OR_RETURN(ParseWrapModes());
EZ_SUCCEED_OR_RETURN(ParseFilterModes());
EZ_SUCCEED_OR_RETURN(ParseResolutionModifiers());
EZ_SUCCEED_OR_RETURN(ParseMiscOptions());
EZ_SUCCEED_OR_RETURN(ParseInputFiles());
EZ_SUCCEED_OR_RETURN(ParseChannelMappings());
return EZ_SUCCESS;
}
CMaterial& CMaterialManager::LoadMaterial(const VfsPath& pathname)
{
if(pathname.empty())
return NullMaterial;
std::map<VfsPath, CMaterial*>::iterator iter = m_Materials.find(pathname);
if(iter != m_Materials.end())
{
if((*iter).second)
return *(*iter).second;
}
CXeromyces xeroFile;
if(xeroFile.Load(g_VFS, pathname) != PSRETURN_OK)
return NullMaterial;
#define EL(x) int el_##x = xeroFile.GetElementID(#x)
#define AT(x) int at_##x = xeroFile.GetAttributeID(#x)
EL(texture);
EL(alpha);
AT(usage);
#undef AT
#undef EL
CMaterial *material = NULL;
try
{
XMBElement root = xeroFile.GetRoot();
XMBElementList childNodes = root.GetChildNodes();
material = new CMaterial();
for(int i = 0; i < childNodes.Count; i++)
{
XMBElement node = childNodes.Item(i);
int token = node.GetNodeName();
XMBAttributeList attrs = node.GetAttributes();
CStr temp;
if(token == el_texture)
{
CStr value(node.GetText());
material->SetTexture(value);
}
else if(token == el_alpha)
{
temp = CStr(attrs.GetNamedItem(at_usage));
// Determine whether the alpha is used for basic transparency or player color
if (temp == "playercolor")
material->SetUsePlayerColor(true);
else if (temp == "objectcolor")
material->SetUseTextureColor(true);
else
material->SetUsesAlpha(ParseUsage(temp));
}
}
m_Materials[pathname] = material;
}
catch(...)
{
SAFE_DELETE(material);
throw;
}
return *material;
}
