int PCB_EDIT_FRAME::OnHotkeyCopyItem()
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return 0;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return 0;
SetCurItem( item );
int eventId = 0;
switch( item->Type() )
{
case PCB_TEXT_T:
eventId = ID_POPUP_PCB_COPY_TEXTEPCB;
break;
default:
eventId = 0;
break;
}
return eventId;
}
bool PCB_EDIT_FRAME::OnHotkeyRotateItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
int evt_type = 0; // Used to post a wxCommandEvent on demand
wxASSERT( aIdCommand == HK_ROTATE_ITEM );
// Allows block rotate operation on hot key.
if( GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
evt_type = ID_POPUP_ROTATE_BLOCK;
}
else
{
if( !itemCurrentlyEdited )
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
switch( item->Type() )
{
case PCB_MODULE_T:
evt_type = ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE;
break;
case PCB_TEXT_T:
evt_type = ID_POPUP_PCB_ROTATE_TEXTEPCB;
break;
case PCB_MODULE_TEXT_T:
evt_type = ID_POPUP_PCB_ROTATE_TEXTMODULE;
break;
default:
break;
}
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
bool PCB_EDIT_FRAME::OnHotkeyMoveItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TRACK_NODE;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT;
if( aIdCommand == HK_DRAG_TRACK_KEEP_SLOPE )
evt_type = ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE;
break;
case PCB_MODULE_T:
{
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
}
break;
case PCB_PAD_T:
// Post MODULE_REQUEST events here to prevent pads
// from being moved or dragged by hotkeys.
// Process_Special_Functions takes care of finding
// the parent.
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_MODULE_REQUEST;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_MODULE_REQUEST;
break;
case PCB_TEXT_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST;
break;
case PCB_TARGET_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_PCB_TARGET_REQUEST;
break;
case PCB_ZONE_AREA_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_ZONE_OUTLINES;
if( aIdCommand == HK_DRAG_ITEM )
evt_type = ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST;
break;
case PCB_LINE_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_DRAWING_REQUEST;
break;
case PCB_DIMENSION_T:
if( aIdCommand == HK_MOVE_ITEM )
evt_type = ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
bool PCB_EDIT_FRAME::OnHotKey( wxDC* aDC, int aHotkeyCode, const wxPoint& aPosition,
EDA_ITEM* aItem )
{
if( aHotkeyCode == 0 )
return false;
bool itemCurrentlyEdited = GetCurItem() && GetCurItem()->GetFlags();
MODULE* module = NULL;
int evt_type = 0; //Used to post a wxCommandEvent on demand
PCB_SCREEN* screen = GetScreen();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)GetDisplayOptions();
/* Convert lower to upper case
* (the usual toupper function has problem with non ascii codes like function keys
*/
if( (aHotkeyCode >= 'a') && (aHotkeyCode <= 'z') )
aHotkeyCode += 'A' - 'a';
EDA_HOTKEY* HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, common_Hotkey_List );
if( HK_Descr == NULL )
HK_Descr = GetDescriptorFromHotkey( aHotkeyCode, board_edit_Hotkey_List );
if( HK_Descr == NULL )
return false;
int hk_id = HK_Descr->m_Idcommand;
// Create a wxCommandEvent that will be posted in some hot keys functions
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
LAYER_NUM ll;
switch( hk_id )
{
default:
case HK_NOT_FOUND:
return false;
case HK_LEFT_CLICK:
OnLeftClick( aDC, aPosition );
break;
case HK_LEFT_DCLICK: // Simulate a double left click: generate 2 events
OnLeftClick( aDC, aPosition );
OnLeftDClick( aDC, aPosition );
break;
case HK_SWITCH_TRACK_WIDTH_TO_NEXT:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() < GetDesignSettings().m_TrackWidthList.size() - 1 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() + 1 );
else
GetDesignSettings().SetTrackWidthIndex( 0 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_TRACK_WIDTH_TO_PREVIOUS:
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
if( GetDesignSettings().GetTrackWidthIndex() <= 0 )
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().m_TrackWidthList.size() -1 );
else
GetDesignSettings().SetTrackWidthIndex( GetDesignSettings().GetTrackWidthIndex() - 1 );
if( GetCanvas()->IsMouseCaptured() )
GetCanvas()->CallMouseCapture( aDC, wxDefaultPosition, false );
break;
case HK_SWITCH_GRID_TO_FASTGRID1:
SetFastGrid1();
break;
case HK_SWITCH_GRID_TO_FASTGRID2:
SetFastGrid2();
break;
case HK_SWITCH_GRID_TO_NEXT:
evt_type = ID_POPUP_GRID_NEXT;
break;
case HK_SWITCH_GRID_TO_PREVIOUS:
evt_type = ID_POPUP_GRID_PREV;
break;
case HK_SWITCH_LAYER_TO_PREVIOUS:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == F_Cu )
ll = B_Cu;
else if( ll == B_Cu )
ll = ToLAYER_ID( GetBoard()->GetCopperLayerCount() - 2 );
else
ll = ll - 1;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_NEXT:
ll = GetActiveLayer();
if( !IsCopperLayer( ll ) )
break;
if( ll == B_Cu )
ll = F_Cu;
else if( ++ll >= GetBoard()->GetCopperLayerCount() - 1 )
ll = B_Cu;
SwitchLayer( aDC, ToLAYER_ID( ll ) );
break;
case HK_SWITCH_LAYER_TO_COMPONENT:
SwitchLayer( aDC, F_Cu );
break;
case HK_SWITCH_LAYER_TO_COPPER:
SwitchLayer( aDC, B_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER1:
SwitchLayer( aDC, In1_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER2:
SwitchLayer( aDC, In2_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER3:
SwitchLayer( aDC, In3_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER4:
SwitchLayer( aDC, In4_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER5:
SwitchLayer( aDC, In5_Cu );
break;
case HK_SWITCH_LAYER_TO_INNER6:
SwitchLayer( aDC, In6_Cu );
break;
case HK_HELP: // Display Current hotkey list
DisplayHotkeyList( this, g_Board_Editor_Hotkeys_Descr );
break;
case HK_PREFERENCES:
evt_type = wxID_PREFERENCES;
break;
case HK_ZOOM_IN:
evt_type = ID_KEY_ZOOM_IN;
break;
case HK_ZOOM_OUT:
evt_type = ID_KEY_ZOOM_OUT;
break;
case HK_ZOOM_REDRAW:
evt_type = ID_ZOOM_REDRAW;
break;
case HK_ZOOM_AUTO:
evt_type = ID_ZOOM_PAGE;
break;
case HK_ZOOM_CENTER:
evt_type = ID_POPUP_ZOOM_CENTER;
break;
case HK_ZOOM_SELECTION:
evt_type = ID_ZOOM_SELECTION;
break;
case HK_ADD_MODULE:
evt_type = ID_PCB_MODULE_BUTT;
break;
case HK_UNDO:
case HK_REDO:
if( !itemCurrentlyEdited )
{
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED, HK_Descr->m_IdMenuEvent );
wxPostEvent( this, event );
}
break;
case HK_RESET_LOCAL_COORD: // Set the relative coord
GetScreen()->m_O_Curseur = GetCrossHairPosition();
break;
case HK_SET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
GetCrossHairPosition() );
m_canvas->Refresh();
break;
case HK_RESET_GRID_ORIGIN:
PCBNEW_CONTROL::SetGridOrigin( GetGalCanvas()->GetView(), this,
new KIGFX::ORIGIN_VIEWITEM( GetGridOrigin(), UR_TRANSIENT ),
wxPoint( 0, 0 ) );
m_canvas->Refresh();
break;
case HK_SWITCH_UNITS:
evt_type = (GetUserUnits() == INCHES) ?
ID_TB_OPTIONS_SELECT_UNIT_MM : ID_TB_OPTIONS_SELECT_UNIT_INCH;
break;
case HK_SWITCH_TRACK_DISPLAY_MODE:
displ_opts->m_DisplayPcbTrackFill = !displ_opts->m_DisplayPcbTrackFill;
m_canvas->Refresh();
break;
case HK_DELETE:
OnHotkeyDeleteItem( aDC );
break;
case HK_BACK_SPACE:
if( IsCopperLayer( GetActiveLayer() ) )
{
if( !itemCurrentlyEdited )
{
// no track is currently being edited - select a segment and remove it.
// @todo: possibly? pass the HK command code to PcbGeneralLocateAndDisplay()
// so it can restrict its search to specific item types.
BOARD_ITEM * item = PcbGeneralLocateAndDisplay();
// don't let backspace delete modules!!
if( item && item->IsTrack() )
{
Delete_Segment( aDC, (TRACK*) item );
SetCurItem( NULL );
}
OnModify();
}
else if( GetCurItem()->IsTrack() )
{
// then an element is being edited - remove the last segment.
// simple lines for debugger:
TRACK* track = (TRACK*) GetCurItem();
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
}
}
break;
case HK_GET_AND_MOVE_FOOTPRINT:
if( !itemCurrentlyEdited )
evt_type = ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST;
break;
case HK_FIND_ITEM:
if( !itemCurrentlyEdited )
evt_type = ID_FIND_ITEMS;
break;
case HK_OPEN:
if( !itemCurrentlyEdited )
evt_type = ID_LOAD_FILE ;
break;
case HK_SAVE:
if( !itemCurrentlyEdited )
evt_type = ID_SAVE_BOARD;
break;
case HK_ADD_MICROVIA: // Place a micro via if a track is in progress
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( !itemCurrentlyEdited ) // no track in progress: nothing to do
break;
if( GetCurItem()->Type() != PCB_TRACE_T ) // Should not occur
return true;
if( !GetCurItem()->IsNew() )
return true;
// place micro via and switch layer
if( IsMicroViaAcceptable() )
evt_type = ID_POPUP_PCB_PLACE_MICROVIA;
break;
case HK_ADD_BLIND_BURIED_VIA:
case HK_ADD_THROUGH_VIA: // Switch to alternate layer and Place a via if a track is in progress
if( GetBoard()->GetDesignSettings().m_BlindBuriedViaAllowed &&
hk_id == HK_ADD_BLIND_BURIED_VIA )
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_BLIND_BURIED;
else
GetBoard()->GetDesignSettings().m_CurrentViaType = VIA_THROUGH;
if( !itemCurrentlyEdited ) // no track in progress: switch layer only
{
Other_Layer_Route( NULL, aDC );
if( displ_opts->m_ContrastModeDisplay )
m_canvas->Refresh();
break;
}
if( GetToolId() != ID_TRACK_BUTT )
return true;
if( GetCurItem()->Type() != PCB_TRACE_T )
return true;
if( !GetCurItem()->IsNew() )
return true;
evt_type = hk_id == HK_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA : ID_POPUP_PCB_PLACE_THROUGH_VIA;
break;
case HK_SEL_LAYER_AND_ADD_THROUGH_VIA:
case HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA:
if( GetCurItem() == NULL || !GetCurItem()->IsNew() ||
GetCurItem()->Type() != PCB_TRACE_T )
break;
evt_type = hk_id == HK_SEL_LAYER_AND_ADD_BLIND_BURIED_VIA ?
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA :
ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA;
break;
case HK_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
*/
evt_type = ID_POPUP_PCB_SWITCH_TRACK_POSTURE ;
break;
case HK_DRAG_TRACK_KEEP_SLOPE:
OnHotkeyMoveItem( HK_DRAG_TRACK_KEEP_SLOPE );
break;
case HK_PLACE_ITEM:
OnHotkeyPlaceItem( aDC );
break;
case HK_ADD_NEW_TRACK: // Start new track, if possible
OnHotkeyBeginRoute( aDC );
break;
case HK_EDIT_ITEM: // Edit board item
OnHotkeyEditItem( HK_EDIT_ITEM );
break;
case HK_EDIT_MODULE_WITH_MODEDIT: // Edit module with module editor
OnHotkeyEditItem( HK_EDIT_MODULE_WITH_MODEDIT );
break;
case HK_LOCK_UNLOCK_FOOTPRINT: // toggle module "MODULE_is_LOCKED" status:
// get any module, locked or not locked and toggle its locked status
if( !itemCurrentlyEdited )
{
wxPoint pos = RefPos( true );
module = GetBoard()->GetFootprint( pos, screen->m_Active_Layer, true );
}
else if( GetCurItem()->Type() == PCB_MODULE_T )
{
module = (MODULE*) GetCurItem();
}
if( module )
{
SetCurItem( module );
module->SetLocked( !module->IsLocked() );
OnModify();
SetMsgPanel( module );
}
break;
case HK_DRAG_ITEM: // Start drag module or track segment
OnHotkeyMoveItem( HK_DRAG_ITEM );
break;
case HK_MOVE_ITEM: // Start move item
OnHotkeyMoveItem( HK_MOVE_ITEM );
break;
case HK_COPY_ITEM:
evt_type = OnHotkeyCopyItem();
break;
case HK_ROTATE_ITEM: // Rotation
OnHotkeyRotateItem( HK_ROTATE_ITEM );
break;
case HK_FLIP_ITEM:
OnHotkeyFlipItem( HK_FLIP_ITEM );
break;
case HK_MOVE_ITEM_EXACT:
case HK_DUPLICATE_ITEM:
case HK_DUPLICATE_ITEM_AND_INCREMENT:
case HK_CREATE_ARRAY:
OnHotkeyDuplicateOrArrayItem( HK_Descr->m_Idcommand );
break;
case HK_SWITCH_HIGHCONTRAST_MODE: // switch to high contrast mode and refresh the canvas
displ_opts->m_ContrastModeDisplay = !displ_opts->m_ContrastModeDisplay;
m_canvas->Refresh();
break;
case HK_CANVAS_CAIRO:
evt_type = ID_MENU_CANVAS_CAIRO;
break;
case HK_CANVAS_OPENGL:
evt_type = ID_MENU_CANVAS_OPENGL;
break;
case HK_CANVAS_LEGACY:
evt_type = ID_MENU_CANVAS_LEGACY;
break;
case HK_ZONE_FILL_OR_REFILL:
evt_type = ID_POPUP_PCB_FILL_ALL_ZONES;
break;
case HK_ZONE_REMOVE_FILLED:
evt_type = ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES;
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
}
return true;
}
bool PCB_EDIT_FRAME::OnHotkeyDeleteItem( wxDC* aDC )
{
BOARD_ITEM* item = GetCurItem();
bool ItemFree = (item == NULL) || (item->GetFlags() == 0);
switch( GetToolId() )
{
case ID_TRACK_BUTT:
if( !IsCopperLayer ( GetActiveLayer() ) )
return false;
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
if( item && !item->IsTrack() )
return false;
Delete_Track( aDC, (TRACK*) item );
}
else if( item->IsTrack( ) )
{
// simple lines for debugger:
TRACK* track = (TRACK*) item;
track = Delete_Segment( aDC, track );
SetCurItem( track );
OnModify();
return true;
}
break;
case ID_PCB_MODULE_BUTT:
if( ItemFree )
{
wxPoint pos = RefPos( false );
MODULE* module = GetBoard()->GetFootprint( pos, UNDEFINED_LAYER, false );
if( module == NULL || module->IsLocked() )
return false;
RemoveStruct( module, aDC );
}
else
return false;
break;
default:
if( ItemFree )
{
item = PcbGeneralLocateAndDisplay();
// Shouldn't there be a check for locked tracks and vias here?
if( item == NULL || (item->Type() == PCB_MODULE_T && (MODULE*)item->IsLocked()) )
return false;
RemoveStruct( item, aDC );
}
else
return false;
}
OnModify();
SetCurItem( NULL );
return true;
}
bool PCB_EDIT_FRAME::OnHotkeyEditItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; //Used to post a wxCommandEvent on demand
switch( item->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( aIdCommand == HK_EDIT_ITEM )
{
// Be sure the corresponding netclass is selected before edit:
SetCurrentNetClass( ( (BOARD_CONNECTED_ITEM*)item )->GetNetClassName() );
evt_type = ID_POPUP_PCB_EDIT_TRACKSEG;
}
break;
case PCB_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTEPCB;
break;
case PCB_MODULE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_MODULE_PRMS;
else if( aIdCommand == HK_EDIT_MODULE_WITH_MODEDIT )
evt_type = ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT;
break;
case PCB_PAD_T:
// Until dec 2012 a EDIT_MODULE event is posted here to prevent pads
// from being edited by hotkeys.
// Process_Special_Functions takes care of finding the parent.
// After dec 2012 a EDIT_PAD event is posted, because there is no
// reason to not allow pad edit by hotkey
// (pad coordinates are no more modified by rounding, in nanometer version
// when using inches or mm in dialog)
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PAD;
break;
case PCB_TARGET_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_PCB_TARGET;
break;
case PCB_DIMENSION_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DIMENSION;
break;
case PCB_MODULE_TEXT_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_TEXTMODULE;
break;
case PCB_LINE_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_DRAWING;
break;
case PCB_ZONE_AREA_T:
if( aIdCommand == HK_EDIT_ITEM )
evt_type = ID_POPUP_PCB_EDIT_ZONE_PARAMS;
break;
default:
break;
}
if( evt_type != 0 )
{
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED );
evt.SetEventObject( this );
evt.SetId( evt_type );
GetEventHandler()->ProcessEvent( evt );
return true;
}
return false;
}
void WinEDA_ModuleEditFrame::OnLeftDClick(wxDC * DC, const wxPoint& MousePos)
/****************************************************************************/
/* Appelé sur un double click:
pour un élément editable (textes, composant):
appel de l'editeur correspondant.
*/
{
EDA_BaseStruct * DrawStruct = m_CurrentScreen->m_CurrentItem;
wxPoint pos = GetPosition();
wxClientDC dc(DrawPanel);
DrawPanel->PrepareGraphicContext(&dc);
switch ( m_ID_current_state )
{
case 0:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags != 0) )
break;
// Element localisé
m_CurrentScreen->m_CurrentItem = DrawStruct;
switch ( DrawStruct->m_StructType )
{
case TYPEPAD:
InstallPadOptionsFrame(
(D_PAD *)DrawStruct, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPEMODULE:
InstallModuleOptionsFrame((MODULE *)DrawStruct,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPETEXTEMODULE:
InstallTextModOptionsFrame((TEXTE_MODULE *)DrawStruct,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
default:
break;
}
break; // end case 0
case ID_LINE_COMMENT_BUTT:
{
if ( DrawStruct && (DrawStruct->m_Flags & IS_NEW) )
{
End_Edge_Module((EDGE_MODULE *) DrawStruct, DC);
m_CurrentScreen->m_CurrentItem = NULL;
}
break;
}
default:
break;
}
}
bool PCB_EDIT_FRAME::OnHotkeyDuplicateOrArrayItem( int aIdCommand )
{
BOARD_ITEM* item = GetCurItem();
bool itemCurrentlyEdited = item && item->GetFlags();
if( itemCurrentlyEdited )
return false;
item = PcbGeneralLocateAndDisplay();
if( item == NULL )
return false;
SetCurItem( item );
int evt_type = 0; // Used to post a wxCommandEvent on demand
bool canDuplicate = true;
switch( item->Type() )
{
// Only handle items we know we can handle
case PCB_PAD_T:
canDuplicate = false;
// no break
case PCB_MODULE_T:
case PCB_LINE_T:
case PCB_TEXT_T:
case PCB_TRACE_T:
case PCB_ZONE_AREA_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
switch( aIdCommand )
{
case HK_CREATE_ARRAY:
if( canDuplicate )
evt_type = ID_POPUP_PCB_CREATE_ARRAY;
break;
case HK_DUPLICATE_ITEM_AND_INCREMENT:
if( canDuplicate )
evt_type = ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT;
break;
case HK_DUPLICATE_ITEM:
if( canDuplicate )
evt_type = ID_POPUP_PCB_DUPLICATE_ITEM;
break;
case HK_MOVE_ITEM_EXACT:
evt_type = ID_POPUP_PCB_MOVE_EXACT;
break;
default:
// We don't handle other commands here
break;
}
break;
default:
evt_type = 0;
break;
}
return PostCommandMenuEvent( evt_type );
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
int flags = 0;
bool locate_track = false;
bool blockActive = (GetScreen()->m_BlockLocate.m_Command != BLOCK_IDLE);
wxClientDC dc( m_canvas );
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block coomand when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
m_canvas->CrossHairOff( &dc );
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
/* Select a proper item */
wxPoint cursorPos = GetScreen()->GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetScreen()->GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show "item selector" menu only if no item now or selected item was not
// previously picked at this position
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
item = PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
m_canvas->CrossHairOn( &dc );
return false;
}
}
}
item = GetCurItem();
if( item )
flags = item->GetFlags();
else
flags = 0;
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Module" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Auto Place Module" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _( "Autoroute Module" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( (D_PAD*) item, aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( (TEXTE_MODULE*) item, aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( apply_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING, _( "Edit Drawing" ),
KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( item->GetLayer() > LAST_COPPER_LAYER )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawing on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( apply_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
locate_track = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST, msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
/* Display context sensitive commands: */
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
_( "Fill or Refill All Zones" ), KiBitmap( fill_zone_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
_( "Remove Filled Areas in All Zones" ), KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! locate_track ) // This menu is already added when a track is located
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Glob Move and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Modules" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Modules" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES,
_( "Move All Modules" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _( "Move New Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _( "Autoplace All Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _( "Autoplace New Modules" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _( "Autoplace Next Module" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Modules" ), KiBitmap( rotate_module_pos_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _( "Autoroute All Modules" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( locate_track )
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
}
m_canvas->CrossHairOn( &dc );
return true;
}
void WinEDA_PcbFrame::OnRightClick(const wxPoint& MousePos, wxMenu * PopMenu)
/****************************************************************************/
/* Prepare le menu PullUp affiché par un click sur le bouton droit
de la souris.
Ce menu est ensuite complété par la liste des commandes de ZOOM
*/
{
EDA_BaseStruct *DrawStruct = m_CurrentScreen->m_CurrentItem;
wxString msg;
int flags = 0;
bool locate_track = FALSE;
bool BlockActive = (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE);
wxClientDC dc(DrawPanel);
GetScreen()->CursorOff(DrawPanel, &dc);
DrawPanel->m_CanStartBlock = -1; // Ne pas engager un debut de bloc sur validation menu
// Simple localisation des elements si possible
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
if (m_HTOOL_current_state == ID_TOOLBARH_PCB_AUTOPLACE)
{
DrawStruct = Locate_Prefered_Module(m_Pcb, CURSEUR_OFF_GRILLE);
if ( DrawStruct ) ((MODULE*)DrawStruct)->Display_Infos(this);
else DrawStruct = PcbGeneralLocateAndDisplay();
}
else DrawStruct = PcbGeneralLocateAndDisplay();
}
// Si commande en cours: affichage fin de commande
if ( m_ID_current_state )
{
if ( DrawStruct && DrawStruct->m_Flags )
{
ADD_MENUITEM(PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_("Cancel"), cancel_xpm);
}
else
{
ADD_MENUITEM(PopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_("End Tool"), cancel_tool_xpm);
}
PopMenu->AppendSeparator();
}
else
{
if ( (DrawStruct && DrawStruct->m_Flags) || BlockActive )
{
if ( BlockActive )
{
ADD_MENUITEM(PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_("Cancel Block"), cancel_xpm );
ADD_MENUITEM(PopMenu, ID_POPUP_ZOOM_BLOCK,
_("Zoom Block (Midd butt drag)"), zoom_selected_xpm );
PopMenu->AppendSeparator();
ADD_MENUITEM(PopMenu, ID_POPUP_PLACE_BLOCK,
_("Place Block"), apply_xpm );
ADD_MENUITEM(PopMenu, ID_POPUP_COPY_BLOCK,
_("Copy Block (shift + drag mouse)"), copyblock_xpm );
ADD_MENUITEM(PopMenu, ID_POPUP_INVERT_BLOCK,
_("Flip Block (alt + drag mouse)"), invert_module_xpm );
ADD_MENUITEM(PopMenu, ID_POPUP_ROTATE_BLOCK,
_("Rotate Block (ctrl + drag mouse)"), rotate_pos_xpm );
ADD_MENUITEM(PopMenu, ID_POPUP_DELETE_BLOCK,
_("Delete Block (shift+ctrl + drag mouse)"), delete_xpm );
}
else
{
ADD_MENUITEM(PopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_("Cancel"), cancel_xpm);
}
PopMenu->AppendSeparator();
}
}
if ( BlockActive ) goto out;
m_CurrentScreen->m_CurrentItem = DrawStruct;
if ( DrawStruct )
{
flags = DrawStruct->m_Flags;
switch ( DrawStruct->m_StructType )
{
case TYPEMODULE:
if( !flags ) AppendModuleOnRightClickMenu(PopMenu, TRUE);
else AppendModuleOnRightClickMenu(PopMenu, FALSE);
if (m_HTOOL_current_state == ID_TOOLBARH_PCB_AUTOPLACE)
{
PopMenu->AppendSeparator();
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, _("Fix Module"),
Locked_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, _("Free Module"),
Unlocked_xpm);
if( !flags )
PopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_("Auto place Module"));
}
if (m_HTOOL_current_state == ID_TOOLBARH_PCB_AUTOROUTE)
{
if( !flags )
PopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE, _("Autoroute"));
}
if( !flags )
{
PopMenu->AppendSeparator();
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_MODULE,
_("Delete Module"), Delete_Module_xpm);
}
break;
case TYPEPAD:
if( !flags )
{
MODULE * Module = (MODULE *) DrawStruct->m_Parent;
if (Module)
{
AppendModuleOnRightClickMenu(PopMenu, TRUE);
PopMenu->AppendSeparator();
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_MOVE_PAD_REQUEST,
_("Move Pad"), move_pad_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DRAG_PAD_REQUEST,
_("Drag Pad"), drag_pad_xpm);
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EDIT_PAD, _("Edit Pad"), options_pad_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_IMPORT_PAD_SETTINGS,
_("New Pad Settings"), options_new_pad_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EXPORT_PAD_SETTINGS,
_("Export Pad Settings"), Export_Options_Pad_xpm);
if (m_HTOOL_current_state == ID_TOOLBARH_PCB_AUTOROUTE)
{
if( !flags )
{
PopMenu->Append( ID_POPUP_PCB_AUTOROUTE_PAD, _("Autoroute Pad"));
PopMenu->Append( ID_POPUP_PCB_AUTOROUTE_NET, _("Autoroute Net"));
}
}
if( !flags )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_PAD,
_("delete Pad"), Delete_Pad_xpm);
PopMenu->AppendSeparator();
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS,
_("Global Pad Settings"), global_options_pad_xpm);
}
break;
case TYPETEXTEMODULE:
if( !flags )
{
MODULE * Module = (MODULE *) DrawStruct->m_Parent;
if (Module)
{
AppendModuleOnRightClickMenu(PopMenu, TRUE);
PopMenu->AppendSeparator();
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST,
_("Move Text Mod."), Move_Field_xpm);
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_ROTATE_TEXTMODULE,
_("Rotate Text Mod."), Rotate_Field_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EDIT_TEXTMODULE,
_("Edit Text Mod."), edit_text_xpm);
if ( ((TEXTE_MODULE*)DrawStruct)->m_Type == TEXT_is_DIVERS)
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_TEXTMODULE,
_("Delete Text Mod."), delete_xpm);
break;
case TYPEDRAWSEGMENT:
if( !flags )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
_("Move Drawing"), move_xpm);
}
if( flags & IS_NEW )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_("End Drawing"), apply_xpm);
}
PopMenu->Append(ID_POPUP_PCB_EDIT_DRAWING, _("Edit Drawing"));
PopMenu->Append(ID_POPUP_PCB_DELETE_DRAWING, _("Delete Drawing"));
break;
case TYPEEDGEZONE:
if( flags & IS_NEW )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_("End edge zone"), apply_xpm);
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_EDGE_ZONE,
_("Delete edge zone"), delete_xpm);
break;
case TYPETEXTE:
if( !flags )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST,
_("Move Text"), move_text_xpm);
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_ROTATE_TEXTEPCB,
_("Rotate Text"), rotate_pos_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EDIT_TEXTEPCB,
_("Edit Text"), edit_text_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_TEXTEPCB,
_("Delete Text"), delete_text_xpm);
break;
case TYPETRACK:
case TYPEVIA:
locate_track = TRUE;
CreatePopupMenuForTracks( (TRACK *) DrawStruct, GetScreen()->m_Curseur,
PopMenu);
break;
case TYPEZONE:
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EDIT_ZONE,
_("Edit Zone"), edit_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_ZONE,
_("Delete Zone"), delete_xpm);
break;
case TYPEMARQUEUR:
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_MARKER,
_("Delete Marker"), delete_xpm);
break;
case TYPECOTATION:
if( !flags )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EDIT_COTATION,
_("Edit Cotation"), edit_xpm);
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_COTATION,
_("Delete Cotation"), delete_xpm);
break;
case TYPEMIRE:
if( !flags )
{
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST,
_("Move Mire"), move_xpm );
}
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_EDIT_MIRE,
_("Edit Mire"), edit_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DELETE_MIRE,
_("Delete Mire"), delete_xpm);
break;
case TYPEEDGEMODULE:
case TYPESCREEN:
case TYPE_NOT_INIT:
case TYPEPCB:
case PCB_EQUIPOT_STRUCT_TYPE:
msg.Printf(
wxT("WinEDA_PcbFrame::OnRightClick Error: illegal DrawType %d"),
DrawStruct->m_StructType);
DisplayError(this, msg );
break;
default:
msg.Printf(
wxT("WinEDA_PcbFrame::OnRightClick Error: unknown DrawType %d"),
DrawStruct->m_StructType);
DisplayError(this, msg );
break;
}
PopMenu->AppendSeparator();
}
/* Traitement des fonctions specifiques */
switch ( m_ID_current_state )
{
case ID_PCB_ZONES_BUTT:
{
bool add_separator = FALSE;
PopMenu->Append(ID_POPUP_PCB_FILL_ZONE, _("Fill zone") );
if ( DrawStruct &&
( (DrawStruct->m_StructType == TYPEPAD) ||
(DrawStruct->m_StructType == TYPETRACK) ||
(DrawStruct->m_StructType == TYPEVIA) ) )
{
add_separator = TRUE;
PopMenu->Append(ID_POPUP_PCB_SELECT_NET_ZONE, _("Select Net"));
}
if( m_Pcb->m_CurrentLimitZone )
{
add_separator = TRUE;
PopMenu->Append(ID_POPUP_PCB_DELETE_ZONE_LIMIT, _("Delete Zone Limit"));
}
if ( add_separator ) PopMenu->AppendSeparator();
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_SELECT_LAYER,
_("Select Working Layer"), Select_W_Layer_xpm);
PopMenu->AppendSeparator();
}
break;
case ID_TRACK_BUTT:
{
ADD_MENUITEM_WITH_SUBMENU( PopMenu, Append_Track_Width_List(),
ID_POPUP_PCB_SELECT_WIDTH,
_("Select Track Width"), width_track_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_("Select Working Layer"), Select_W_Layer_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_("Select layer pair for vias"), select_layer_pair_xpm);
PopMenu->AppendSeparator();
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_TEXT_COMMENT_BUTT:
case ID_LINE_COMMENT_BUTT:
case ID_PCB_COTATION_BUTT:
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_("Select Working Layer"), Select_W_Layer_xpm);
PopMenu->AppendSeparator();
break;
case ID_COMPONENT_BUTT:
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_("Footprint documentation"), book_xpm);
PopMenu->AppendSeparator();
break;
case 0:
if (m_HTOOL_current_state == ID_TOOLBARH_PCB_AUTOPLACE)
{
wxMenu * commands = new wxMenu;
ADD_MENUITEM_WITH_SUBMENU(PopMenu, commands,
ID_POPUP_PCB_AUTOPLACE_COMMANDS, _("Glob Move and Place"), move_xpm);
ADD_MENUITEM(commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_("Free All Modules"), Unlocked_xpm);
ADD_MENUITEM(commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_("Fixe All Modules"), Locked_xpm);
commands->AppendSeparator();
ADD_MENUITEM(commands, ID_POPUP_PCB_AUTOMOVE_ALL_MODULES,
_("Move All Modules"), move_xpm);
commands->Append( ID_POPUP_PCB_AUTOMOVE_NEW_MODULES, _("Move New Modules"));
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES, _("Autoplace All Modules"));
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES, _("Autoplace New Modules"));
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE, _("Autoplace Next Module"));
commands->AppendSeparator();
ADD_MENUITEM(commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_("Orient All Modules"), rotate_module_pos_xpm);
PopMenu->AppendSeparator();
}
if (m_HTOOL_current_state == ID_TOOLBARH_PCB_AUTOROUTE)
{
wxMenu * commands = new wxMenu;
PopMenu->Append(ID_POPUP_PCB_AUTOROUTE_COMMANDS, _("Global Autoroute"), commands);
ADD_MENUITEM(commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_("Select layer pair"), select_layer_pair_xpm);
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES, _("Autoroute All Modules"));
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _("Reset Unrouted"));
if ( m_Pcb->m_Modules )
{
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER,
_("Global AutoRouter"));
commands->Append( ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER_DATA,
_("Read Global AutoRouter Data"));
}
PopMenu->AppendSeparator();
}
if ( locate_track )
ADD_MENUITEM_WITH_SUBMENU(PopMenu, Append_Track_Width_List(),
ID_POPUP_PCB_SELECT_WIDTH, _("Select Track Width"),
width_track_xpm);
ADD_MENUITEM(PopMenu, ID_POPUP_PCB_SELECT_LAYER,
_("Select Working Layer"), Select_W_Layer_xpm);
PopMenu->AppendSeparator();
break;
}
out:
GetScreen()->CursorOn(DrawPanel, &dc);
}
/* Handle the left button mouse click, when a tool is active
*/
void PCB_EDIT_FRAME::OnLeftClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
bool exit = false;
bool no_tool = GetToolId() == ID_NO_TOOL_SELECTED;
if( no_tool || ( DrawStruct && DrawStruct->GetFlags() ) )
{
m_canvas->SetAutoPanRequest( false );
if( DrawStruct && DrawStruct->GetFlags() ) // Command in progress
{
m_canvas->SetIgnoreMouseEvents( true );
m_canvas->CrossHairOff( aDC );
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
if( DrawStruct->IsNew() )
{
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
}
else
{
End_Move_Zone_Corner_Or_Outlines( aDC, (ZONE_CONTAINER*) DrawStruct );
}
exit = true;
break;
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_TEXT_T:
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_TEXT_T:
PlaceTexteModule( (TEXTE_MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_PAD_T:
PlacePad( (D_PAD*) DrawStruct, aDC );
exit = true;
break;
case PCB_MODULE_T:
PlaceModule( (MODULE*) DrawStruct, aDC );
exit = true;
break;
case PCB_TARGET_T:
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
exit = true;
break;
case PCB_LINE_T:
if( no_tool ) // when no tools: existing item moving.
{
Place_DrawItem( (DRAWSEGMENT*) DrawStruct, aDC );
exit = true;
}
break;
case PCB_DIMENSION_T:
if( ! DrawStruct->IsNew() )
{ // We are moving the text of an existing dimension. Place it
PlaceDimensionText( (DIMENSION*) DrawStruct, aDC );
exit = true;
}
break;
default:
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() err: DrawType %d m_Flags != 0" ),
DrawStruct->Type() );
exit = true;
break;
}
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->CrossHairOn( aDC );
if( exit )
return;
}
else if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
}
}
if( DrawStruct ) // display netclass info for zones, tracks and pads
{
switch( DrawStruct->Type() )
{
case PCB_ZONE_AREA_T:
case PCB_TRACE_T:
case PCB_VIA_T:
case PCB_PAD_T:
GetDesignSettings().SetCurrentNetClass(
((BOARD_CONNECTED_ITEM*)DrawStruct)->GetNetClassName() );
updateTraceWidthSelectBox();
updateViaSizeSelectBox();
break;
default:
break;
}
}
switch( GetToolId() )
{
case ID_MAIN_MENUBAR:
case ID_NO_TOOL_SELECTED:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand( aDC, aPosition );
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = SelectHighLight( aDC );
if( netcode < 0 )
SetMsgPanel( GetBoard() );
else
{
NETINFO_ITEM* net = GetBoard()->FindNet( netcode );
if( net )
{
MSG_PANEL_ITEMS items;
net->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
}
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest( DrawStruct, aDC );
if( DrawStruct )
SendMessageToEESCHEMA( DrawStruct );
break;
case ID_PCB_MIRE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( (BOARD_ITEM*) CreateTarget( aDC ) );
m_canvas->MoveCursorToCrossHair();
}
else if( DrawStruct->Type() == PCB_TARGET_T )
{
PlaceTarget( (PCB_TARGET*) DrawStruct, aDC );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TARGET_T" ) );
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_LINE_BUTT:
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_PCB_CIRCLE_BUTT )
shape = S_CIRCLE;
if( GetToolId() == ID_PCB_ARC_BUTT )
shape = S_ARC;
if( IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Graphic not allowed on Copper layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( NULL, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct
&& (DrawStruct->Type() == PCB_LINE_T)
&& DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) Begin_DrawSegment( (DRAWSEGMENT*) DrawStruct, shape, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
}
break;
case ID_TRACK_BUTT:
if( !IsCopperLayer( GetActiveLayer() ) )
{
DisplayError( this, _( "Tracks on Copper layers only " ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) Begin_Route( NULL, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && DrawStruct->IsNew() )
{
TRACK* track = Begin_Route( (TRACK*) DrawStruct, aDC );
// SetCurItem() must not write to the msg panel
// because a track info is displayed while moving the mouse cursor
if( track ) // A new segment was created
SetCurItem( DrawStruct = (BOARD_ITEM*) track, false );
m_canvas->SetAutoPanRequest( true );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
/* ZONE or KEEPOUT Tool is selected. Determine action for a left click:
* this can be start a new zone or select and move an existing zone outline corner
* if found near the mouse cursor
*/
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
if( Begin_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( true );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
}
else if( DrawStruct && (DrawStruct->Type() == PCB_ZONE_AREA_T) && DrawStruct->IsNew() )
{ // Add a new corner to the current outline being created:
m_canvas->SetAutoPanRequest( true );
Begin_Zone( aDC );
DrawStruct = GetBoard()->m_CurrentZoneContour;
GetScreen()->SetCurItem( DrawStruct );
}
else
{
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() zone internal error" ) );
}
break;
case ID_PCB_ADD_TEXT_BUTT:
if( IsLayerInList( EDGE_LAYER, GetActiveLayer() ) )
{
DisplayError( this,
_( "Texts not allowed on Edge Cut layer" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
SetCurItem( CreateTextePcb( aDC ) );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct->Type() == PCB_TEXT_T )
{
Place_Texte_Pcb( (TEXTE_PCB*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "OnLeftClick err: not a PCB_TEXT_T" ) );
}
break;
case ID_PCB_MODULE_BUTT:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
m_canvas->MoveCursorToCrossHair();
DrawStruct = (BOARD_ITEM*) LoadModuleFromLibrary(
wxEmptyString, Prj().PcbFootprintLibs(), true, aDC );
SetCurItem( DrawStruct );
if( DrawStruct )
StartMoveModule( (MODULE*) DrawStruct, aDC, false );
}
else if( DrawStruct->Type() == PCB_MODULE_T )
{
PlaceModule( (MODULE*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
}
else
{
DisplayError( this, wxT( "Internal err: Struct not PCB_MODULE_T" ) );
}
break;
case ID_PCB_DIMENSION_BUTT:
if( IsLayerInList( EDGE_LAYER|ALL_CU_LAYERS, GetActiveLayer() ) )
{
DisplayError( this,
_( "Dimension not allowed on Copper or Edge Cut layers" ) );
break;
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = (BOARD_ITEM*) EditDimension( NULL, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else if( DrawStruct && (DrawStruct->Type() == PCB_DIMENSION_T) && DrawStruct->IsNew() )
{
DrawStruct = (BOARD_ITEM*) EditDimension( (DIMENSION*) DrawStruct, aDC );
SetCurItem( DrawStruct );
m_canvas->SetAutoPanRequest( true );
}
else
{
DisplayError( this,
wxT( "PCB_EDIT_FRAME::OnLeftClick() error item is not a DIMENSION" ) );
}
break;
case ID_PCB_DELETE_ITEM_BUTT:
if( !DrawStruct || !DrawStruct->GetFlags() )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if( DrawStruct && (DrawStruct->GetFlags() == 0) )
{
RemoveStruct( DrawStruct, aDC );
SetCurItem( DrawStruct = NULL );
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
m_canvas->DrawAuxiliaryAxis( aDC, GR_XOR );
SetAuxOrigin( GetCrossHairPosition() );
m_canvas->DrawAuxiliaryAxis( aDC, GR_COPY );
OnModify();
break;
case ID_PCB_PLACE_GRID_COORD_BUTT:
m_canvas->DrawGridAxis( aDC, GR_XOR, GetBoard()->GetGridOrigin() );
SetGridOrigin( GetCrossHairPosition() );
m_canvas->DrawGridAxis( aDC, GR_COPY, GetBoard()->GetGridOrigin() );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::OnLeftClick() id error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
}
/* handle the double click on the mouse left button
*/
void PCB_EDIT_FRAME::OnLeftDClick( wxDC* aDC, const wxPoint& aPosition )
{
BOARD_ITEM* DrawStruct = GetCurItem();
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
if( (DrawStruct == NULL) || (DrawStruct->GetFlags() != 0) )
break;
SendMessageToEESCHEMA( DrawStruct );
// An item is found
SetCurItem( DrawStruct );
switch( DrawStruct->Type() )
{
case PCB_TRACE_T:
case PCB_VIA_T:
if( DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
else if( DrawStruct->GetFlags() == 0 )
{
Edit_TrackSegm_Width( aDC, (TRACK*) DrawStruct );
}
break;
case PCB_TEXT_T:
case PCB_PAD_T:
case PCB_MODULE_T:
case PCB_TARGET_T:
case PCB_DIMENSION_T:
case PCB_MODULE_TEXT_T:
OnEditItemRequest( aDC, DrawStruct );
m_canvas->MoveCursorToCrossHair();
break;
case PCB_LINE_T:
OnEditItemRequest( aDC, DrawStruct );
break;
case PCB_ZONE_AREA_T:
if( DrawStruct->GetFlags() )
break;
OnEditItemRequest( aDC, DrawStruct );
break;
default:
break;
}
break; // end case 0
case ID_TRACK_BUTT:
if( DrawStruct && DrawStruct->IsNew() )
{
if( End_Route( (TRACK*) DrawStruct, aDC ) )
m_canvas->SetAutoPanRequest( false );
}
break;
case ID_PCB_ZONES_BUTT:
case ID_PCB_KEEPOUT_AREA_BUTT:
if( End_Zone( aDC ) )
{
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
if( DrawStruct == NULL )
break;
if( DrawStruct->Type() != PCB_LINE_T )
{
DisplayError( this, wxT( "DrawStruct Type error" ) );
m_canvas->SetAutoPanRequest( false );
break;
}
if( DrawStruct->IsNew() )
{
End_Edge( (DRAWSEGMENT*) DrawStruct, aDC );
m_canvas->SetAutoPanRequest( false );
SetCurItem( NULL );
}
break;
}
}
void WinEDA_PcbFrame::OnLeftClick(wxDC * DC, const wxPoint& MousePos)
/********************************************************************/
/* Traite les commandes declenchée par le bouton gauche de la souris,
quand un outil est deja selectionné
*/
{
EDA_BaseStruct * DrawStruct = CURRENT_ITEM;
if ( (m_ID_current_state == 0) || ( DrawStruct && DrawStruct->m_Flags ))
{
DrawPanel->m_AutoPAN_Request = FALSE;
if ( DrawStruct && DrawStruct->m_Flags ) // Commande "POPUP" en cours
{
switch (DrawStruct->m_StructType )
{
case TYPETRACK:
case TYPEVIA:
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *)DrawStruct, DC);
return;
}
break;
case TYPETEXTE:
Place_Texte_Pcb((TEXTE_PCB *)DrawStruct, DC);
return;
break;
case TYPETEXTEMODULE:
PlaceTexteModule( (TEXTE_MODULE *) DrawStruct, DC);
return;
break;
case TYPEPAD:
PlacePad((D_PAD *)DrawStruct, DC);
return;
break;
case TYPEMODULE:
Place_Module((MODULE *)DrawStruct, DC);
return;
break;
case TYPEMIRE:
Place_Mire((MIREPCB *)DrawStruct, DC);
return;
break;
case TYPEDRAWSEGMENT:
if (m_ID_current_state == 0)
{
Place_DrawItem( (DRAWSEGMENT * )DrawStruct, DC);
return;
}
break;
default:
if (m_ID_current_state == 0)
{
DisplayError(this,
wxT("WinEDA_PcbFrame::OnLeftClick() err: m_Flags != 0") );
return;
}
}
}
else
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
}
switch ( m_ID_current_state )
{
case ID_MAIN_MENUBAR:
case 0:
break;
case ID_NO_SELECT_BUTT:
break;
case ID_PCB_MUWAVE_TOOL_SELF_CMD:
case ID_PCB_MUWAVE_TOOL_GAP_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_CMD:
case ID_PCB_MUWAVE_TOOL_STUB_ARC_CMD:
case ID_PCB_MUWAVE_TOOL_FUNCTION_SHAPE_CMD:
MuWaveCommand(DC, MousePos);
break;
case ID_PCB_HIGHLIGHT_BUTT:
{
int netcode = Select_High_Light(DC);
if ( netcode < 0 ) Affiche_Infos_Status_Pcb(this);
else Affiche_Infos_Equipot(netcode, this);
}
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
DrawStruct = PcbGeneralLocateAndDisplay();
Show_1_Ratsnest(DrawStruct, DC);
break;
case ID_PCB_MIRE_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = Create_Mire( DC );
DrawPanel->MouseToCursorSchema();
}
else if (DrawStruct->m_StructType == TYPEMIRE )
{
Place_Mire((MIREPCB *)DrawStruct, DC);
}
else DisplayError(this, wxT("Internal err: Struct not TYPEMIRE"));
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_LINE_COMMENT_BUTT:
{
int shape = S_SEGMENT;
if ( m_ID_current_state == ID_PCB_CIRCLE_BUTT) shape = S_CIRCLE;
if ( m_ID_current_state == ID_PCB_ARC_BUTT) shape = S_ARC;
if ( GetScreen()->m_Active_Layer <= CMP_N )
{
DisplayError(this, _("Graphic not autorized on Copper layers"));
break;
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_DrawSegment(NULL, shape, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct &&
(DrawStruct->m_StructType == TYPEDRAWSEGMENT) &&
(DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_DrawSegment((DRAWSEGMENT *)DrawStruct, shape, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
break;
}
case ID_TRACK_BUTT:
if ( GetScreen()->m_Active_Layer > CMP_N )
{
DisplayError(this, _("Tracks on Copper layers only "));
break;
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Route(NULL, DC);
if ( DrawStruct ) DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct &&
// (DrawStruct->m_StructType == TYPETRACK) &&
(DrawStruct->m_Flags & IS_NEW) )
{
TRACK * track = Begin_Route((TRACK *) DrawStruct, DC);
if ( track ) // c'est a dire si OK
GetScreen()->m_CurrentItem = DrawStruct = track;
DrawPanel->m_AutoPAN_Request = TRUE;
}
break;
case ID_PCB_ZONES_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Zone();
}
else if (DrawStruct &&
(DrawStruct->m_StructType == TYPEEDGEZONE) &&
(DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Zone();
}
else DisplayError(this, wxT("Edit: zone internal error"));
break;
case ID_TEXT_COMMENT_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = Create_Texte_Pcb( DC );
DrawPanel->MouseToCursorSchema();
DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct->m_StructType == TYPETEXTE )
{
Place_Texte_Pcb((TEXTE_PCB *)DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
else DisplayError(this, wxT("Internal err: Struct not TYPETEXTE"));
break;
case ID_COMPONENT_BUTT:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
DrawPanel->MouseToCursorSchema();
GetScreen()->m_CurrentItem = DrawStruct =
Load_Module_From_Library(wxEmptyString, DC);
if ( DrawStruct )
StartMove_Module((MODULE *)DrawStruct, DC);
}
else if (DrawStruct->m_StructType == TYPEMODULE )
{
Place_Module((MODULE *)DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
else DisplayError(this, wxT("Internal err: Struct not TYPEMODULE"));
break;
case ID_PCB_COTATION_BUTT:
if ( GetScreen()->m_Active_Layer <= CMP_N )
{
DisplayError(this, _("Cotation not autorized on Copper layers"));
break;
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Cotation(NULL, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else if (DrawStruct &&
(DrawStruct->m_StructType == TYPECOTATION) &&
(DrawStruct->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = DrawStruct =
Begin_Cotation((COTATION * )DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = TRUE;
}
else DisplayError(this, wxT("Internal err: Struct not COTATION"));
break;
case ID_PCB_DELETE_ITEM_BUTT:
if ( !DrawStruct || (DrawStruct->m_Flags == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
if ( DrawStruct && (DrawStruct->m_Flags == 0) )
{
RemoveStruct(DrawStruct, DC);
GetScreen()->m_CurrentItem = DrawStruct = NULL;
}
}
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
GetScreen()->Trace_Curseur(DrawPanel, DC);
DrawPanel->m_Draw_Auxiliary_Axe(DC, GR_XOR);
m_Auxiliary_Axe_Position = GetScreen()->m_Curseur;
DrawPanel->m_Draw_Auxiliary_Axe( DC, GR_COPY);
GetScreen()->Trace_Curseur(DrawPanel, DC);
break;
default :
DrawPanel->SetCursor(wxCURSOR_ARROW);
DisplayError(this, wxT("WinEDA_PcbFrame::OnLeftClick() id error"));
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
break;
}
}
void WinEDA_PcbFrame::OnLeftDClick(wxDC * DC, const wxPoint& MousePos)
/********************************************************************************/
/* Appelé sur un double click:
pour un élément editable (textes, composant):
appel de l'editeur correspondant.
pour une connexion en cours:
termine la connexion
*/
{
EDA_BaseStruct * DrawStruct = CURRENT_ITEM;
wxPoint pos = GetPosition();
wxClientDC dc(DrawPanel);
DrawPanel->PrepareGraphicContext(&dc);
switch ( m_ID_current_state )
{
case 0:
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags == 0) )
{
DrawStruct = PcbGeneralLocateAndDisplay();
}
if ( (DrawStruct == NULL) || (DrawStruct->m_Flags != 0) )
break;
// Element localisé
GetScreen()->m_CurrentItem = DrawStruct;
switch ( DrawStruct->m_StructType )
{
case TYPETRACK:
case TYPEVIA:
if (DrawStruct->m_Flags & IS_NEW)
{
End_Route( (TRACK *) DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
else if (DrawStruct->m_Flags == 0)
{
Edit_TrackSegm_Width(DC,
(TRACK *) DrawStruct);
}
break;
case TYPETEXTE:
InstallTextPCBOptionsFrame((TEXTE_PCB *)DrawStruct,
DC, ((TEXTE_PCB *)DrawStruct)->m_Pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPEPAD:
InstallPadOptionsFrame(
(D_PAD *)DrawStruct, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPEMODULE:
InstallModuleOptionsFrame((MODULE *)DrawStruct,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPEMIRE:
InstallMireOptionsFrame( (MIREPCB *)DrawStruct, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPETEXTEMODULE:
InstallTextModOptionsFrame((TEXTE_MODULE *)DrawStruct,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case TYPEDRAWSEGMENT:
break;
default:
break;
}
break; // end case 0
case ID_TRACK_BUTT:
if ( DrawStruct && (DrawStruct->m_Flags & IS_NEW) )
{
End_Route( (TRACK *) DrawStruct, DC);
DrawPanel->m_AutoPAN_Request = FALSE;
}
break;
case ID_PCB_ZONES_BUTT:
End_Zone(DC);
DrawPanel->m_AutoPAN_Request = FALSE;
GetScreen()->m_CurrentItem = NULL;
break;
case ID_LINE_COMMENT_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
if ( DrawStruct == NULL ) break;
if ( DrawStruct->m_StructType != TYPEDRAWSEGMENT )
{
DisplayError(this, wxT("DrawStruct Type error"));
DrawPanel->m_AutoPAN_Request = FALSE;
break;
}
if ( (DrawStruct->m_Flags & IS_NEW) )
{
End_Edge( (DRAWSEGMENT *) DrawStruct, &dc);
DrawPanel->m_AutoPAN_Request = FALSE;
GetScreen()->m_CurrentItem = NULL;
}
break;
}
}
bool PCB_EDIT_FRAME::OnRightClick( const wxPoint& aMousePos, wxMenu* aPopMenu )
{
wxString msg;
STATUS_FLAGS flags = 0;
bool trackFound = false; // Flag set to true,
// if a track is being the cursor, to avoid
// to display menus relative to tracks twice
bool blockActive = !GetScreen()->m_BlockLocate.IsIdle();
BOARD_ITEM* item = GetCurItem();
m_canvas->SetCanStartBlock( -1 ); // Avoid to start a block command when clicking on menu
// If a command or a block is in progress:
// Put the Cancel command (if needed) and the End command
if( blockActive )
{
createPopUpBlockMenu( aPopMenu );
aPopMenu->AppendSeparator();
return true;
}
if( GetToolId() != ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND, _( "Cancel" ),
KiBitmap( cancel_xpm ) );
}
else
{
AddMenuItem( aPopMenu, ID_POPUP_CLOSE_CURRENT_TOOL,
_( "End Tool" ), KiBitmap( cursor_xpm ) );
}
aPopMenu->AppendSeparator();
}
else
{
if( item && item->GetFlags() )
{
AddMenuItem( aPopMenu, ID_POPUP_CANCEL_CURRENT_COMMAND,
_( "Cancel" ), KiBitmap( cancel_xpm ) );
aPopMenu->AppendSeparator();
}
}
// Select a proper item
wxPoint cursorPos = GetCrossHairPosition();
wxPoint selectPos = m_Collector->GetRefPos();
selectPos = GetNearestGridPosition( selectPos );
/* We can reselect another item only if there are no item being edited
* because ALL moving functions use GetCurItem(), therefore GetCurItem()
* must return the same item during moving. We know an item is moving
* if( item && (item->m_Flags != 0)) is true and after calling
* PcbGeneralLocateAndDisplay(), GetCurItem() is any arbitrary BOARD_ITEM,
* not the current item being edited. In such case we cannot call
* PcbGeneralLocateAndDisplay().
*/
if( !item || (item->GetFlags() == 0) )
{
// show the "item selector" menu if no item selected or
// if there is a selected item but the mouse has moved
// (therefore a new item is perhaps under the cursor)
if( !item || cursorPos != selectPos )
{
m_canvas->SetAbortRequest( false );
PcbGeneralLocateAndDisplay();
if( m_canvas->GetAbortRequest() )
{
return false;
}
}
}
item = GetCurItem();
flags = item ? item->GetFlags() : 0;
// Add the context menu, which depends on the picked item:
if( item )
{
switch( item->Type() )
{
case PCB_MODULE_T:
createPopUpMenuForFootprints( (MODULE*) item, aPopMenu );
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
aPopMenu->AppendSeparator();
if( !( (MODULE*) item )->IsLocked() )
{
msg = AddHotkeyName( _("Lock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FIXE_MODULE, msg,
KiBitmap( locked_xpm ) );
}
else
{
msg = AddHotkeyName( _( "Unlock Footprint" ), g_Board_Editor_Hokeys_Descr,
HK_LOCK_UNLOCK_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_AUTOPLACE_FREE_MODULE, msg,
KiBitmap( unlocked_xpm ) );
}
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOPLACE_CURRENT_MODULE,
_( "Automatically Place Footprint" ) );
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
if( !flags )
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_MODULE,
_( "Automatically Route Footprint" ) );
}
break;
case PCB_PAD_T:
createPopUpMenuForFpPads( static_cast<D_PAD*>( item ), aPopMenu );
break;
case PCB_MODULE_TEXT_T:
createPopUpMenuForFpTexts( static_cast<TEXTE_MODULE*>( item ), aPopMenu );
break;
case PCB_LINE_T: // Some graphic items on technical layers
if( (flags & IS_NEW) )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_DRAWING,
_( "End Drawing" ), KiBitmap( checked_ok_xpm ) );
}
if( !flags )
{
msg = AddHotkeyName( _( "Move Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_DRAWING_REQUEST,
msg, KiBitmap( move_xpm ) );
msg = AddHotkeyName( _( "Duplicate Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_line_xpm ) );
msg = AddHotkeyName( _("Move Drawing Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_line_xpm ) );
msg = AddHotkeyName( _("Create Drawing Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_line_xpm ) );
msg = AddHotkeyName( _( "Edit Drawing" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DRAWING,
msg, KiBitmap( edit_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING,
_( "Delete Drawing" ), KiBitmap( delete_xpm ) );
if( !IsCopperLayer( item->GetLayer() ) )
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DRAWING_LAYER,
_( "Delete All Drawings on Layer" ), KiBitmap( delete_xpm ) );
}
break;
case PCB_ZONE_T: // Item used to fill a zone
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE,
_( "Delete Zone Filling" ), KiBitmap( delete_xpm ) );
break;
case PCB_ZONE_AREA_T: // Item used to handle a zone area (outlines, holes ...)
if( flags & IS_NEW )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE,
_( "Close Zone Outline" ), KiBitmap( checked_ok_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER,
_( "Delete Last Corner" ), KiBitmap( delete_xpm ) );
}
else
{
createPopUpMenuForZones( (ZONE_CONTAINER*) item, aPopMenu );
}
break;
case PCB_TEXT_T:
createPopUpMenuForTexts( (TEXTE_PCB*) item, aPopMenu );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
trackFound = true;
createPopupMenuForTracks( (TRACK*) item, aPopMenu );
break;
case PCB_MARKER_T:
createPopUpMenuForMarkers( (MARKER_PCB*) item, aPopMenu );
break;
case PCB_DIMENSION_T:
if( !flags )
{
msg = AddHotkeyName( _( "Edit Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_DIMENSION, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Move Dimension Text" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Duplicate Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_text_xpm ) );
msg = AddHotkeyName( _("Move Dimension Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_text_xpm ) );
msg = AddHotkeyName( _( "Delete Dimension" ), g_Board_Editor_Hokeys_Descr,
HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_DIMENSION,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_TARGET_T:
if( !flags )
{
msg = AddHotkeyName( _( "Move Target" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_MIRE_REQUEST,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _("Move Target Exactly" ), g_Board_Editor_Hokeys_Descr,
HK_MOVE_ITEM_EXACT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_MOVE_EXACT,
msg, KiBitmap( move_target_xpm ) );
msg = AddHotkeyName( _( "Duplicate Target" ), g_Board_Editor_Hokeys_Descr,
HK_DUPLICATE_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DUPLICATE_ITEM,
msg, KiBitmap( duplicate_target_xpm ) );
msg = AddHotkeyName( _("Create Target Array" ), g_Board_Editor_Hokeys_Descr,
HK_CREATE_ARRAY );
AddMenuItem( aPopMenu, ID_POPUP_PCB_CREATE_ARRAY,
msg, KiBitmap( array_target_xpm ) );
msg = AddHotkeyName( _( "Edit Target" ), g_Board_Editor_Hokeys_Descr,
HK_EDIT_ITEM );
AddMenuItem( aPopMenu, ID_POPUP_PCB_EDIT_MIRE, msg, KiBitmap( edit_xpm ) );
msg = AddHotkeyName( _( "Delete Target" ), g_Board_Editor_Hokeys_Descr, HK_DELETE );
AddMenuItem( aPopMenu, ID_POPUP_PCB_DELETE_MIRE,
msg, KiBitmap( delete_xpm ) );
}
break;
case PCB_MODULE_EDGE_T:
case SCREEN_T:
case TYPE_NOT_INIT:
case PCB_T:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unexpected DrawType %d" ),
item->Type() );
wxMessageBox( msg );
SetCurItem( NULL );
break;
default:
msg.Printf( wxT( "PCB_EDIT_FRAME::OnRightClick() Error: unknown DrawType %d" ),
item->Type() );
wxMessageBox( msg );
// Attempt to clear error (but should no occurs )
if( item->Type() >= MAX_STRUCT_TYPE_ID )
SetCurItem( NULL );
break;
}
aPopMenu->AppendSeparator();
}
if( !flags )
{
msg = AddHotkeyName( _( "Get and Move Footprint" ),
g_Board_Editor_Hokeys_Descr, HK_GET_AND_MOVE_FOOTPRINT );
AddMenuItem( aPopMenu, ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST,
msg, KiBitmap( move_module_xpm ) );
}
// Display context sensitive commands:
switch( GetToolId() )
{
case ID_PCB_ZONES_BUTT:
if( GetBoard()->m_ZoneDescriptorList.size() > 0 )
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Fill or Refill All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_FILL_OR_REFILL );
AddMenuItem( aPopMenu, ID_POPUP_PCB_FILL_ALL_ZONES,
msg, KiBitmap( fill_zone_xpm ) );
msg = AddHotkeyName( _( "Remove Filled Areas in All Zones" ),
g_Board_Editor_Hokeys_Descr, HK_ZONE_REMOVE_FILLED );
AddMenuItem( aPopMenu, ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES,
msg, KiBitmap( zone_unfill_xpm ) );
aPopMenu->AppendSeparator();
}
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_KEEPOUT_AREA_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_TRACK_BUTT:
if ( ! trackFound ) // This menu is already added when a track is located
{
aPopMenu->AppendSeparator();
msg = AddHotkeyName( _( "Begin Track" ),
g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK,
msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair for Vias" ), KiBitmap( select_layer_pair_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_PCB_CIRCLE_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_ADD_TEXT_BUTT:
case ID_PCB_ADD_LINE_BUTT:
case ID_PCB_DIMENSION_BUTT:
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_NO_CU_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
break;
case ID_PCB_MODULE_BUTT:
if( !flags )
{
AddMenuItem( aPopMenu, ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC,
_( "Footprint Documentation" ), KiBitmap( book_xpm ) );
aPopMenu->AppendSeparator();
}
break;
case ID_NO_TOOL_SELECTED:
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_MODULE ) )
{
wxMenu* commands = new wxMenu;
AddMenuItem( aPopMenu, commands, ID_POPUP_PCB_AUTOPLACE_COMMANDS,
_( "Global Spread and Place" ), KiBitmap( move_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FREE_ALL_MODULES,
_( "Unlock All Footprints" ), KiBitmap( unlocked_xpm ) );
AddMenuItem( commands, ID_POPUP_PCB_AUTOPLACE_FIXE_ALL_MODULES,
_( "Lock All Footprints" ), KiBitmap( locked_xpm ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_SPREAD_ALL_MODULES,
_( "Spread out All Footprints" ), KiBitmap( move_xpm ) );
commands->Append( ID_POPUP_PCB_SPREAD_NEW_MODULES,
_( "Spread out Footprints not Already on Board" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOPLACE_ALL_MODULES,
_( "Automatically Place All Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEW_MODULES,
_( "Automatically Place New Footprints" ) );
commands->Append( ID_POPUP_PCB_AUTOPLACE_NEXT_MODULE,
_( "Automatically Place Next Footprints" ) );
commands->AppendSeparator();
AddMenuItem( commands, ID_POPUP_PCB_REORIENT_ALL_MODULES,
_( "Orient All Footprints" ), KiBitmap( rotate_module_cw_xpm ) );
aPopMenu->AppendSeparator();
}
if( m_mainToolBar->GetToolToggled( ID_TOOLBARH_PCB_MODE_TRACKS ) )
{
wxMenu* commands = new wxMenu;
aPopMenu->Append( ID_POPUP_PCB_AUTOROUTE_COMMANDS, _( "Autoroute" ), commands );
AddMenuItem( commands, ID_POPUP_PCB_SELECT_LAYER_PAIR,
_( "Select Layer Pair" ), KiBitmap( select_layer_pair_xpm ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_ALL_MODULES,
_( "Automatically Route All Footprints" ) );
commands->AppendSeparator();
commands->Append( ID_POPUP_PCB_AUTOROUTE_RESET_UNROUTED, _( "Reset Unrouted" ) );
aPopMenu->AppendSeparator();
}
if( !trackFound )
{
msg = AddHotkeyName( _( "Begin Track" ), g_Board_Editor_Hokeys_Descr, HK_ADD_NEW_TRACK );
AddMenuItem( aPopMenu, ID_POPUP_PCB_BEGIN_TRACK, msg, KiBitmap( add_tracks_xpm ) );
AddMenuItem( aPopMenu, Append_Track_Width_List( GetBoard() ),
ID_POPUP_PCB_SELECT_WIDTH, _( "Select Track Width" ),
KiBitmap( width_track_xpm ) );
AddMenuItem( aPopMenu, ID_POPUP_PCB_SELECT_LAYER,
_( "Select Working Layer" ), KiBitmap( select_w_layer_xpm ) );
aPopMenu->AppendSeparator();
}
break;
}
return true;
}
