/**
Find and display image base address and return image base and its entry point.
@param CurrentEip Current instruction pointer.
**/
VOID
DumpModuleImageInfo (
IN UINTN CurrentEip
)
{
EFI_STATUS Status;
UINTN Pe32Data;
VOID *PdbPointer;
VOID *EntryPoint;
Pe32Data = PeCoffSearchImageBase (CurrentEip);
if (Pe32Data == 0) {
InternalPrintMessage ("!!!! Can't find image information. !!!!\n");
} else {
//
// Find Image Base entry point
//
Status = PeCoffLoaderGetEntryPoint ((VOID *) Pe32Data, &EntryPoint);
if (EFI_ERROR (Status)) {
EntryPoint = NULL;
}
InternalPrintMessage ("!!!! Find image based on IP(0x%x) ", CurrentEip);
PdbPointer = PeCoffLoaderGetPdbPointer ((VOID *) Pe32Data);
if (PdbPointer != NULL) {
InternalPrintMessage ("%a", PdbPointer);
} else {
InternalPrintMessage ("(No PDB) " );
}
InternalPrintMessage (
" (ImageBase=%016lp, EntryPoint=%016p) !!!!\n",
(VOID *) Pe32Data,
EntryPoint
);
}
}
RETURN_STATUS
EFIAPI
SecPeCoffGetEntryPoint (
IN VOID *Pe32Data,
IN OUT VOID **EntryPoint
)
{
EFI_STATUS Status;
PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
ZeroMem (&ImageContext, sizeof (ImageContext));
ImageContext.Handle = Pe32Data;
ImageContext.ImageRead = (PE_COFF_LOADER_READ_FILE) SecImageRead;
Status = PeCoffLoaderGetImageInfo (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
if (ImageContext.ImageAddress != (UINTN)Pe32Data) {
//
// Relocate image to match the address where it resides
//
ImageContext.ImageAddress = (UINTN)Pe32Data;
Status = PeCoffLoaderLoadImage (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
Status = PeCoffLoaderRelocateImage (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
} else {
//
// Or just return image entry point
//
ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer (Pe32Data);
Status = PeCoffLoaderGetEntryPoint (Pe32Data, EntryPoint);
if (EFI_ERROR (Status)) {
return Status;
}
ImageContext.EntryPoint = (UINTN)*EntryPoint;
}
// On Unix a dlopen is done that will change the entry point
SecPeCoffRelocateImageExtraAction (&ImageContext);
*EntryPoint = (VOID *)(UINTN)ImageContext.EntryPoint;
return Status;
}
/**
Find and return Pei Core entry point.
It also find SEC and PEI Core file debug information. It will report them if
remote debug is enabled.
@param SecCoreFirmwareVolumePtr Point to the firmware volume for finding SecCore.
@param PeiCoreFirmwareVolumePtr Point to the firmware volume for finding PeiCore.
@param PeiCoreEntryPoint The entry point of the PEI core.
**/
VOID
EFIAPI
FindAndReportEntryPoints (
IN EFI_FIRMWARE_VOLUME_HEADER *SecCoreFirmwareVolumePtr,
IN EFI_FIRMWARE_VOLUME_HEADER *PeiCoreFirmwareVolumePtr,
OUT EFI_PEI_CORE_ENTRY_POINT *PeiCoreEntryPoint
)
{
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS SecCoreImageBase;
EFI_PHYSICAL_ADDRESS PeiCoreImageBase;
PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
//
// Find SEC Core image base
//
Status = FindImageBase (SecCoreFirmwareVolumePtr, EFI_FV_FILETYPE_SECURITY_CORE, &SecCoreImageBase);
ASSERT_EFI_ERROR (Status);
ZeroMem ((VOID *) &ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT));
//
// Report SEC Core debug information when remote debug is enabled
//
ImageContext.ImageAddress = SecCoreImageBase;
ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN) ImageContext.ImageAddress);
PeCoffLoaderRelocateImageExtraAction (&ImageContext);
//
// Find PEI Core image base
//
Status = FindImageBase (PeiCoreFirmwareVolumePtr, EFI_FV_FILETYPE_PEI_CORE, &PeiCoreImageBase);
ASSERT_EFI_ERROR (Status);
//
// Report PEI Core debug information when remote debug is enabled
//
ImageContext.ImageAddress = PeiCoreImageBase;
ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*) (UINTN) ImageContext.ImageAddress);
PeCoffLoaderRelocateImageExtraAction (&ImageContext);
//
// Find PEI Core entry point
//
Status = PeCoffLoaderGetEntryPoint ((VOID *) (UINTN) PeiCoreImageBase, (VOID**) PeiCoreEntryPoint);
if (EFI_ERROR (Status)) {
*PeiCoreEntryPoint = 0;
}
return;
}
/**
Main entry point to DXE Core.
@param HobStart Pointer to the beginning of the HOB List from PEI.
@return This function should never return.
**/
VOID
EFIAPI
DxeMain (
IN VOID *HobStart
)
{
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS MemoryBaseAddress;
UINT64 MemoryLength;
PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
UINTN Index;
EFI_HOB_GUID_TYPE *GuidHob;
EFI_VECTOR_HANDOFF_INFO *VectorInfoList;
EFI_VECTOR_HANDOFF_INFO *VectorInfo;
VOID *EntryPoint;
//
// Setup the default exception handlers
//
VectorInfoList = NULL;
GuidHob = GetNextGuidHob (&gEfiVectorHandoffInfoPpiGuid, HobStart);
if (GuidHob != NULL) {
VectorInfoList = (EFI_VECTOR_HANDOFF_INFO *) (GET_GUID_HOB_DATA(GuidHob));
}
Status = InitializeCpuExceptionHandlers (VectorInfoList);
ASSERT_EFI_ERROR (Status);
//
// Initialize Debug Agent to support source level debug in DXE phase
//
InitializeDebugAgent (DEBUG_AGENT_INIT_DXE_CORE, HobStart, NULL);
//
// Initialize Memory Services
//
CoreInitializeMemoryServices (&HobStart, &MemoryBaseAddress, &MemoryLength);
MemoryProfileInit (HobStart);
//
// Allocate the EFI System Table and EFI Runtime Service Table from EfiRuntimeServicesData
// Use the templates to initialize the contents of the EFI System Table and EFI Runtime Services Table
//
gDxeCoreST = AllocateRuntimeCopyPool (sizeof (EFI_SYSTEM_TABLE), &mEfiSystemTableTemplate);
ASSERT (gDxeCoreST != NULL);
gDxeCoreRT = AllocateRuntimeCopyPool (sizeof (EFI_RUNTIME_SERVICES), &mEfiRuntimeServicesTableTemplate);
ASSERT (gDxeCoreRT != NULL);
gDxeCoreST->RuntimeServices = gDxeCoreRT;
//
// Start the Image Services.
//
Status = CoreInitializeImageServices (HobStart);
ASSERT_EFI_ERROR (Status);
//
// Initialize the Global Coherency Domain Services
//
Status = CoreInitializeGcdServices (&HobStart, MemoryBaseAddress, MemoryLength);
ASSERT_EFI_ERROR (Status);
//
// Call constructor for all libraries
//
ProcessLibraryConstructorList (gDxeCoreImageHandle, gDxeCoreST);
PERF_END (NULL,"PEI", NULL, 0) ;
PERF_START (NULL,"DXE", NULL, 0) ;
//
// Report DXE Core image information to the PE/COFF Extra Action Library
//
ZeroMem (&ImageContext, sizeof (ImageContext));
ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN)gDxeCoreLoadedImage->ImageBase;
ImageContext.PdbPointer = PeCoffLoaderGetPdbPointer ((VOID*)(UINTN)ImageContext.ImageAddress);
ImageContext.SizeOfHeaders = PeCoffGetSizeOfHeaders ((VOID*)(UINTN)ImageContext.ImageAddress);
Status = PeCoffLoaderGetEntryPoint ((VOID*)(UINTN)ImageContext.ImageAddress, &EntryPoint);
if (Status == EFI_SUCCESS) {
ImageContext.EntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)EntryPoint;
}
ImageContext.Handle = (VOID *)(UINTN)gDxeCoreLoadedImage->ImageBase;
ImageContext.ImageRead = PeCoffLoaderImageReadFromMemory;
PeCoffLoaderRelocateImageExtraAction (&ImageContext);
//
// Install the DXE Services Table into the EFI System Tables's Configuration Table
//
Status = CoreInstallConfigurationTable (&gEfiDxeServicesTableGuid, gDxeCoreDS);
ASSERT_EFI_ERROR (Status);
//
// Install the HOB List into the EFI System Tables's Configuration Table
//
Status = CoreInstallConfigurationTable (&gEfiHobListGuid, HobStart);
ASSERT_EFI_ERROR (Status);
//
// Install Memory Type Information Table into the EFI System Tables's Configuration Table
//
Status = CoreInstallConfigurationTable (&gEfiMemoryTypeInformationGuid, &gMemoryTypeInformation);
ASSERT_EFI_ERROR (Status);
//
// If Loading modules At fixed address feature is enabled, install Load moduels at fixed address
// Configuration Table so that user could easily to retrieve the top address to load Dxe and PEI
// Code and Tseg base to load SMM driver.
//
if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0) {
Status = CoreInstallConfigurationTable (&gLoadFixedAddressConfigurationTableGuid, &gLoadModuleAtFixAddressConfigurationTable);
ASSERT_EFI_ERROR (Status);
}
//
// Report Status Code here for DXE_ENTRY_POINT once it is available
//
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_ENTRY_POINT)
);
//
// Create the aligned system table pointer structure that is used by external
// debuggers to locate the system table... Also, install debug image info
// configuration table.
//
CoreInitializeDebugImageInfoTable ();
CoreNewDebugImageInfoEntry (
EFI_DEBUG_IMAGE_INFO_TYPE_NORMAL,
gDxeCoreLoadedImage,
gDxeCoreImageHandle
);
DEBUG ((DEBUG_INFO | DEBUG_LOAD, "HOBLIST address in DXE = 0x%p\n", HobStart));
DEBUG_CODE_BEGIN ();
EFI_PEI_HOB_POINTERS Hob;
for (Hob.Raw = HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw = GET_NEXT_HOB(Hob)) {
if (GET_HOB_TYPE (Hob) == EFI_HOB_TYPE_MEMORY_ALLOCATION) {
DEBUG ((DEBUG_INFO | DEBUG_LOAD, "Memory Allocation 0x%08x 0x%0lx - 0x%0lx\n", \
Hob.MemoryAllocation->AllocDescriptor.MemoryType, \
Hob.MemoryAllocation->AllocDescriptor.MemoryBaseAddress, \
Hob.MemoryAllocation->AllocDescriptor.MemoryBaseAddress + Hob.MemoryAllocation->AllocDescriptor.MemoryLength - 1));
}
}
for (Hob.Raw = HobStart; !END_OF_HOB_LIST(Hob); Hob.Raw = GET_NEXT_HOB(Hob)) {
if (GET_HOB_TYPE (Hob) == EFI_HOB_TYPE_FV2) {
DEBUG ((DEBUG_INFO | DEBUG_LOAD, "FV2 Hob 0x%0lx - 0x%0lx\n", Hob.FirmwareVolume2->BaseAddress, Hob.FirmwareVolume2->BaseAddress + Hob.FirmwareVolume2->Length - 1));
} else if (GET_HOB_TYPE (Hob) == EFI_HOB_TYPE_FV) {
DEBUG ((DEBUG_INFO | DEBUG_LOAD, "FV Hob 0x%0lx - 0x%0lx\n", Hob.FirmwareVolume->BaseAddress, Hob.FirmwareVolume->BaseAddress + Hob.FirmwareVolume->Length - 1));
}
}
DEBUG_CODE_END ();
//
// Initialize the Event Services
//
Status = CoreInitializeEventServices ();
ASSERT_EFI_ERROR (Status);
MemoryProfileInstallProtocol ();
CoreInitializePropertiesTable ();
CoreInitializeMemoryAttributesTable ();
//
// Get persisted vector hand-off info from GUIDeed HOB again due to HobStart may be updated,
// and install configuration table
//
GuidHob = GetNextGuidHob (&gEfiVectorHandoffInfoPpiGuid, HobStart);
if (GuidHob != NULL) {
VectorInfoList = (EFI_VECTOR_HANDOFF_INFO *) (GET_GUID_HOB_DATA(GuidHob));
VectorInfo = VectorInfoList;
Index = 1;
while (VectorInfo->Attribute != EFI_VECTOR_HANDOFF_LAST_ENTRY) {
VectorInfo ++;
Index ++;
}
VectorInfo = AllocateCopyPool (sizeof (EFI_VECTOR_HANDOFF_INFO) * Index, (VOID *) VectorInfoList);
ASSERT (VectorInfo != NULL);
Status = CoreInstallConfigurationTable (&gEfiVectorHandoffTableGuid, (VOID *) VectorInfo);
ASSERT_EFI_ERROR (Status);
}
//
// Get the Protocols that were passed in from PEI to DXE through GUIDed HOBs
//
// These Protocols are not architectural. This implementation is sharing code between
// PEI and DXE in order to save FLASH space. These Protocols could also be implemented
// as part of the DXE Core. However, that would also require the DXE Core to be ported
// each time a different CPU is used, a different Decompression algorithm is used, or a
// different Image type is used. By placing these Protocols in PEI, the DXE Core remains
// generic, and only PEI and the Arch Protocols need to be ported from Platform to Platform,
// and from CPU to CPU.
//
//
// Publish the EFI, Tiano, and Custom Decompress protocols for use by other DXE components
//
Status = CoreInstallMultipleProtocolInterfaces (
&mDecompressHandle,
&gEfiDecompressProtocolGuid, &gEfiDecompress,
NULL
);
ASSERT_EFI_ERROR (Status);
//
// Register for the GUIDs of the Architectural Protocols, so the rest of the
// EFI Boot Services and EFI Runtime Services tables can be filled in.
// Also register for the GUIDs of optional protocols.
//
CoreNotifyOnProtocolInstallation ();
//
// Produce Firmware Volume Protocols, one for each FV in the HOB list.
//
Status = FwVolBlockDriverInit (gDxeCoreImageHandle, gDxeCoreST);
ASSERT_EFI_ERROR (Status);
Status = FwVolDriverInit (gDxeCoreImageHandle, gDxeCoreST);
ASSERT_EFI_ERROR (Status);
//
// Produce the Section Extraction Protocol
//
Status = InitializeSectionExtraction (gDxeCoreImageHandle, gDxeCoreST);
ASSERT_EFI_ERROR (Status);
//
// Initialize the DXE Dispatcher
//
PERF_START (NULL,"CoreInitializeDispatcher", "DxeMain", 0) ;
CoreInitializeDispatcher ();
PERF_END (NULL,"CoreInitializeDispatcher", "DxeMain", 0) ;
//
// Invoke the DXE Dispatcher
//
PERF_START (NULL, "CoreDispatcher", "DxeMain", 0);
CoreDispatcher ();
PERF_END (NULL, "CoreDispatcher", "DxeMain", 0);
//
// Display Architectural protocols that were not loaded if this is DEBUG build
//
DEBUG_CODE_BEGIN ();
CoreDisplayMissingArchProtocols ();
DEBUG_CODE_END ();
//
// Display any drivers that were not dispatched because dependency expression
// evaluated to false if this is a debug build
//
DEBUG_CODE_BEGIN ();
CoreDisplayDiscoveredNotDispatched ();
DEBUG_CODE_END ();
//
// Assert if the Architectural Protocols are not present.
//
Status = CoreAllEfiServicesAvailable ();
if (EFI_ERROR(Status)) {
//
// Report Status code that some Architectural Protocols are not present.
//
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MAJOR,
(EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_EC_NO_ARCH)
);
}
ASSERT_EFI_ERROR (Status);
//
// Report Status code before transfer control to BDS
//
REPORT_STATUS_CODE (
EFI_PROGRESS_CODE,
(EFI_SOFTWARE_DXE_CORE | EFI_SW_DXE_CORE_PC_HANDOFF_TO_NEXT)
);
//
// Transfer control to the BDS Architectural Protocol
//
gBds->Entry (gBds);
//
// BDS should never return
//
ASSERT (FALSE);
CpuDeadLoop ();
UNREACHABLE ();
}
