Exemplo n.º 1
0
/**
  Retrieves and returns a pointer to the entry point to a PE/COFF image that has been loaded
  into system memory with the PE/COFF Loader Library functions.

  Retrieves the entry point to the PE/COFF image specified by Pe32Data and returns this entry
  point in EntryPoint.  If the entry point could not be retrieved from the PE/COFF image, then
  return RETURN_INVALID_PARAMETER.  Otherwise return RETURN_SUCCESS.
  If Pe32Data is NULL, then ASSERT().
  If EntryPoint is NULL, then ASSERT().

  @param  Pe32Data                  The pointer to the PE/COFF image that is loaded in system memory.
  @param  EntryPoint                The pointer to entry point to the PE/COFF image to return.

  @retval RETURN_SUCCESS            EntryPoint was returned.
  @retval RETURN_INVALID_PARAMETER  The entry point could not be found in the PE/COFF image.

**/
RETURN_STATUS
EFIAPI
PeCoffLoaderGetEntryPoint (
  IN     VOID  *Pe32Data,
  IN OUT VOID  **EntryPoint
  )
{
  EMU_THUNK_PPI           *ThunkPpi;
  EFI_STATUS              Status;
  EMU_THUNK_PROTOCOL      *Thunk;

  //
  // Locate EmuThunkPpi for retrieving standard output handle
  //
  Status = PeiServicesLocatePpi (
              &gEmuThunkPpiGuid,
              0,
              NULL,
              (VOID **) &ThunkPpi
             );
  ASSERT_EFI_ERROR (Status);

  Thunk  = (EMU_THUNK_PROTOCOL *)ThunkPpi->Thunk ();

  return Thunk->PeCoffGetEntryPoint (Pe32Data, EntryPoint);
}
Exemplo n.º 2
0
/*++

Routine Description:

Arguments:

  FileHandle  - Handle of the file being invoked.
  PeiServices - Describes the list of possible PEI Services.

Returns:

  Status -  EFI_SUCCESS if the boot mode could be set

--*/
EFI_STATUS
EFIAPI
InitializeCpuPeim (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  EFI_STATUS              Status;
  ARM_MP_CORE_INFO_PPI    *ArmMpCoreInfoPpi;
  UINTN                   ArmCoreCount;
  ARM_CORE_INFO           *ArmCoreInfoTable;

  // Enable program flow prediction, if supported.
  ArmEnableBranchPrediction ();

  // Publish the CPU memory and io spaces sizes
  BuildCpuHob (PcdGet8 (PcdPrePiCpuMemorySize), PcdGet8 (PcdPrePiCpuIoSize));

  // Only MP Core platform need to produce gArmMpCoreInfoPpiGuid
  Status = PeiServicesLocatePpi (&gArmMpCoreInfoPpiGuid, 0, NULL, (VOID**)&ArmMpCoreInfoPpi);
  if (!EFI_ERROR(Status)) {
    // Build the MP Core Info Table
    ArmCoreCount = 0;
    Status = ArmMpCoreInfoPpi->GetMpCoreInfo (&ArmCoreCount, &ArmCoreInfoTable);
    if (!EFI_ERROR(Status) && (ArmCoreCount > 0)) {
      // Build MPCore Info HOB
      BuildGuidDataHob (&gArmMpCoreInfoGuid, ArmCoreInfoTable, sizeof (ARM_CORE_INFO) * ArmCoreCount);
    }
  }

  return EFI_SUCCESS;
}
/**

  Initialize OEM status code device .

  @return    Always return EFI_SUCCESS.

**/
EFI_STATUS
EFIAPI
OemHookStatusCodeInitialize (
  VOID
  )
{
  PEI_NT_THUNK_PPI  *NtThunkPpi;
  EFI_STATUS        Status;


  //
  // Locate NtThunkPpi for retrieving standard output handle
  //
  Status = PeiServicesLocatePpi (
              &gPeiNtThunkPpiGuid,
              0,
              NULL,
              (VOID **) &NtThunkPpi
              );

  ASSERT_EFI_ERROR (Status);

  mWinNt  = (EFI_WIN_NT_THUNK_PROTOCOL *) NtThunkPpi->NtThunk ();


  //
  // Cache standard output handle.
  //
  mStdOut = mWinNt->GetStdHandle (STD_OUTPUT_HANDLE);

  return EFI_SUCCESS;
}
Exemplo n.º 4
0
/**
  Write data from buffer to serial device.

  Writes NumberOfBytes data bytes from Buffer to the serial device.
  The number of bytes actually written to the serial device is returned.
  If the return value is less than NumberOfBytes, then the write operation failed.
  If Buffer is NULL, then ASSERT().
  If NumberOfBytes is zero, then return 0.

  @param  Buffer           The pointer to the data buffer to be written.
  @param  NumberOfBytes    The number of bytes to written to the serial device.

  @retval 0                NumberOfBytes is 0.
  @retval >0               The number of bytes written to the serial device.
                           If this value is less than NumberOfBytes, then the read operation failed.

**/
UINTN
EFIAPI
SerialPortWrite (
  IN UINT8     *Buffer,
  IN UINTN     NumberOfBytes
  )
{
  EMU_THUNK_PPI           *ThunkPpi;
  EFI_STATUS              Status;
  EMU_THUNK_PROTOCOL      *Thunk;

  //
  // Locate EmuThunkPpi for retrieving standard output handle
  //
  Status = PeiServicesLocatePpi (
              &gEmuThunkPpiGuid,
              0,
              NULL,
              (VOID **) &ThunkPpi
             );
  if (!EFI_ERROR (Status)) {
    Thunk  = (EMU_THUNK_PROTOCOL *)ThunkPpi->Thunk ();
    return Thunk->WriteStdErr (Buffer, NumberOfBytes);
  }

  return 0;
}
Exemplo n.º 5
0
/**
  Worker function to retrieve the number of logical processor in the platform.

  @param[out] NumberOfCpus                Pointer to the total number of logical
                                          processors in the system, including the BSP
                                          and disabled APs.
  @param[out] NumberOfEnabledProcessors   Pointer to the number of enabled logical
                                          processors that exist in system, including
                                          the BSP.
**/
VOID
GetNumberOfProcessor (
  OUT UINTN                            *NumberOfCpus,
  OUT UINTN                            *NumberOfEnabledProcessors
  )
{
  EFI_STATUS                 Status;
  EFI_PEI_MP_SERVICES_PPI    *CpuMpPpi;

  //
  // Get MP Services Protocol
  //
  Status = PeiServicesLocatePpi (
             &gEfiPeiMpServicesPpiGuid,
             0,
             NULL,
             (VOID **)&CpuMpPpi
             );
  ASSERT_EFI_ERROR (Status);

  //
  // Get the number of CPUs
  //
  Status = CpuMpPpi->GetNumberOfProcessors (
                         GetPeiServicesTablePointer (),
                         CpuMpPpi,
                         NumberOfCpus,
                         NumberOfEnabledProcessors
                         );
  ASSERT_EFI_ERROR (Status);
}
Exemplo n.º 6
0
/**
  Worker function to execute a caller provided function on all enabled APs.

  @param[in]  Procedure               A pointer to the function to be run on
                                      enabled APs of the system.
**/
VOID
StartupAPsWorker (
  IN  EFI_AP_PROCEDURE                 Procedure
  )
{
  EFI_STATUS                           Status;
  EFI_PEI_MP_SERVICES_PPI              *CpuMpPpi;

  //
  // Get MP Services Protocol
  //
  Status = PeiServicesLocatePpi (
             &gEfiPeiMpServicesPpiGuid,
             0,
             NULL,
             (VOID **)&CpuMpPpi
             );
  ASSERT_EFI_ERROR (Status);

  //
  // Wakeup all APs for data collection.
  //
  Status = CpuMpPpi->StartupAllAPs (
                 GetPeiServicesTablePointer (),
                 CpuMpPpi,
                 Procedure,
                 FALSE,
                 0,
                 NULL
                 );
  ASSERT_EFI_ERROR (Status);
}
/**
  The function caches the pointer of the Unix thunk functions
  It will ASSERT() if Unix thunk ppi is not installed.

  @retval EFI_SUCCESS   WinNT thunk protocol is found and cached.

**/
EFI_STATUS
EFIAPI
UnixPeCoffGetUnixThunkStucture (
  )
{
  PEI_UNIX_THUNK_PPI  *UnixThunkPpi;
  EFI_STATUS        Status;

  
  //
  // Locate Unix ThunkPpi for retrieving standard output handle
  //
  Status = PeiServicesLocatePpi (
              &gPeiUnixThunkPpiGuid,
              0,
              NULL,
              (VOID **) &UnixThunkPpi
              );

  ASSERT_EFI_ERROR (Status);

  mUnix  = (EFI_UNIX_THUNK_PROTOCOL *) UnixThunkPpi->UnixThunk ();

  return EFI_SUCCESS;
}
Exemplo n.º 8
0
/**
  FSP notify phase PEI module entry point

  @param[in]  FileHandle           Not used.
  @param[in]  PeiServices          General purpose services available to every PEIM.

  @retval     EFI_SUCCESS          The function completes successfully
  @retval     EFI_OUT_OF_RESOURCES Insufficient resources to create database
**/
EFI_STATUS
FspNotifyPhasePeimEntryPoint (
  IN       EFI_PEI_FILE_HANDLE    FileHandle,
  IN CONST EFI_PEI_SERVICES       **PeiServices
  )
{
  EFI_STATUS                      Status;
  VOID                            *OldDxeIplPpi;
  EFI_PEI_PPI_DESCRIPTOR          *OldDescriptor;

  DEBUG ((DEBUG_INFO | DEBUG_INIT, "The entry of FspNotificationPeim\n"));

  //
  // Locate old DXE IPL PPI
  //
  Status = PeiServicesLocatePpi (
            &gEfiDxeIplPpiGuid,
            0,
            &OldDescriptor,
            &OldDxeIplPpi
            );
  ASSERT_EFI_ERROR (Status);

  //
  // Re-install the DXE IPL PPI to wait for notify
  //
  Status = PeiServicesReInstallPpi (OldDescriptor, &mInstallDxeIplPpi);
  ASSERT_EFI_ERROR (Status);

  return EFI_SUCCESS;
}
Exemplo n.º 9
0
/**

  Core version of the Reset System


  @param PeiServices                An indirect pointer to the EFI_PEI_SERVICES table published by the PEI Foundation.

  @retval EFI_NOT_AVAILABLE_YET     PPI not available yet.
  @retval EFI_DEVICE_ERROR          Did not reset system.
                                    Otherwise, resets the system.

**/
EFI_STATUS
EFIAPI
PeiResetSystem (
  IN CONST EFI_PEI_SERVICES         **PeiServices
  )
{
  EFI_STATUS        Status;
  EFI_PEI_RESET_PPI *ResetPpi;

  Status = PeiServicesLocatePpi (
             &gEfiPeiResetPpiGuid,         
             0,                         
             NULL,                      
             (VOID **)&ResetPpi                  
             );

  //
  // LocatePpi returns EFI_NOT_FOUND on error
  //
  if (!EFI_ERROR (Status)) {
    return ResetPpi->ResetSystem (PeiServices);
  } 
  //
  // Report Status Code that Reset PPI is not available
  //
  REPORT_STATUS_CODE (
    EFI_ERROR_CODE | EFI_ERROR_MINOR,
    (EFI_SOFTWARE_PEI_CORE | EFI_SW_PS_EC_RESET_NOT_AVAILABLE)
    );
  return  EFI_NOT_AVAILABLE_YET;
}
Exemplo n.º 10
0
/**
  Do measurement after memory is ready.

  @param[in]      PeiServices   Describes the list of possible PEI Services.

  @retval EFI_SUCCESS           Operation completed successfully.
  @retval EFI_OUT_OF_RESOURCES  No enough memory to log the new event.
  @retval EFI_DEVICE_ERROR      The command was unsuccessful.

**/
EFI_STATUS
PeimEntryMP (
  IN      EFI_PEI_SERVICES          **PeiServices
  )
{
  EFI_STATUS                        Status;

  Status = PeiServicesLocatePpi (
               &gEfiPeiFirmwareVolumeInfoMeasurementExcludedPpiGuid, 
               0, 
               NULL,
               (VOID**)&mMeasurementExcludedFvPpi
               );
  // Do not check status, because it is optional

  if (PcdGet8 (PcdTpm2ScrtmPolicy) == 1) {
    Status = MeasureCRTMVersion ();
    ASSERT_EFI_ERROR (Status);
  }

  Status = MeasureMainBios ();

  //
  // Post callbacks:
  // for the FvInfoPpi services to measure and record
  // the additional Fvs to TPM
  //
  Status = PeiServicesNotifyPpi (&mNotifyList[0]);
  ASSERT_EFI_ERROR (Status);

  return Status;
}
Exemplo n.º 11
0
/**
  Worker function to switch the requested AP to be the BSP from that point onward.

  @param[in] ProcessorNumber   The handle number of AP that is to become the new BSP.
**/
VOID
SwitchNewBsp (
  IN  UINTN                            ProcessorNumber
  )
{
  EFI_STATUS                           Status;
  EFI_PEI_MP_SERVICES_PPI              *CpuMpPpi;

  //
  // Get MP Services Protocol
  //
  Status = PeiServicesLocatePpi (
             &gEfiPeiMpServicesPpiGuid,
             0,
             NULL,
             (VOID **)&CpuMpPpi
             );
  ASSERT_EFI_ERROR (Status);

  //
  // Wakeup all APs for data collection.
  //
  Status = CpuMpPpi->SwitchBSP (
                 GetPeiServicesTablePointer (),
                 CpuMpPpi,
                 ProcessorNumber,
                 TRUE
                 );
  ASSERT_EFI_ERROR (Status);
}
Exemplo n.º 12
0
/**
  Internal worker function to read a PCI configuration register.

  This function wraps EFI_PEI_PCI_CFG2_PPI.Read() service.
  It reads and returns the PCI configuration register specified by Address,
  the width of data is specified by Width.

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  Width   The width of data to read

  @return The value read from the PCI configuration register.

**/
UINT32
PeiPciLibPciCfg2ReadWorker (
  IN    UINTN                       Address,
  IN    EFI_PEI_PCI_CFG_PPI_WIDTH   Width
  )
{
  EFI_STATUS                   Status;
  UINT32                       Data;
  CONST EFI_PEI_PCI_CFG2_PPI   *PciCfg2Ppi;
  UINT64                       PciCfg2Address;

  Status = PeiServicesLocatePpi (&gEfiPciCfg2PpiGuid, 0, NULL, (VOID **) &PciCfg2Ppi);
  ASSERT_EFI_ERROR (Status);
  ASSERT (PciCfg2Ppi != NULL);

  PciCfg2Address = PCI_TO_PCICFG2_ADDRESS (Address);
  PciCfg2Ppi->Read (
                GetPeiServicesTablePointer (),
                PciCfg2Ppi,
                Width,
                PciCfg2Address,
                &Data
                );

  return Data;
}
Exemplo n.º 13
0
/**
  Gets PCI CFG2 PPI.

  This internal function retrieves PCI CFG2 PPI from PPI database.

  @param  Address       The address that encodes the PCI Segment, Bus, Device,
                        Function and Register.

  @return The pointer to PCI CFG2 PPI.

**/
EFI_PEI_PCI_CFG2_PPI *
InternalGetPciCfg2Ppi (
    IN  UINT64                Address
)
{
    EFI_STATUS                 Status;
    UINTN                      Instance;
    EFI_PEI_PCI_CFG2_PPI       *PciCfg2Ppi;
    UINT64                     SegmentNumber;

    Instance      = 0;
    PciCfg2Ppi    = NULL;
    SegmentNumber = BitFieldRead64 (Address, 32, 63);

    //
    // Loop through all instances of the PPI and match segment number
    //
    do {
        Status = PeiServicesLocatePpi(
                     &gEfiPciCfg2PpiGuid,
                     Instance,
                     NULL,
                     (VOID**) &PciCfg2Ppi
                 );
        ASSERT_EFI_ERROR (Status);
        Instance++;
    } while (PciCfg2Ppi->Segment != SegmentNumber);

    return PciCfg2Ppi;
}
Exemplo n.º 14
0
/**

  Wrap the call to PI's EFI_PEI_LOAD_FILE_PPI.

  @param This           A pointer to EFI_PEI_FV_FILE_LOADER_PPI.
  @param FfsHeader      The pointer to the file header to be loaded by the Pe/Coff loader.
  @param ImageAddress   The loaded address of the Image.
  @param ImageSize      Pointer to the size of the loaded image.
  @param EntryPoint     Pointer to the entry point of the image.

  @retval  EFI_SUCCESS           The image was loaded successfully.
  @retval  EFI_OUT_OF_RESOURCE   There was not enought memory.
  @retval  EFI_INVALID_PARAMETER The contents of the FFS file did not contain a valid PE/COFF image that could be loaded.
**/  
EFI_STATUS
EFIAPI
FrameworkLoadFile (
  IN EFI_PEI_FV_FILE_LOADER_PPI                 *This,
  IN  EFI_FFS_FILE_HEADER                       *FfsHeader,
  OUT EFI_PHYSICAL_ADDRESS                      *ImageAddress,
  OUT UINT64                                    *ImageSize,
  OUT EFI_PHYSICAL_ADDRESS                      *EntryPoint
  )
{
  EFI_STATUS              Status;
  EFI_PEI_LOAD_FILE_PPI   *PiLoadFile;
  UINT32                  AuthenticationState;

  Status = PeiServicesLocatePpi (
             &gEfiPeiLoadFilePpiGuid,
             0,
             NULL,
             (VOID **) &PiLoadFile
             );
  ASSERT_EFI_ERROR (Status);

  return PiLoadFile->LoadFile (
           PiLoadFile,
           (EFI_PEI_FILE_HANDLE) FfsHeader,
           ImageAddress,
           ImageSize,
           EntryPoint,
           &AuthenticationState
         );
    
}
Exemplo n.º 15
0
/**
  Measure and record the Firmware Volum Information once FvInfoPPI install.

  @param[in] PeiServices       An indirect pointer to the EFI_PEI_SERVICES table published by the PEI Foundation.
  @param[in] NotifyDescriptor  Address of the notification descriptor data structure.
  @param[in] Ppi               Address of the PPI that was installed.

  @retval EFI_SUCCESS          The FV Info is measured and recorded to TPM.
  @return Others               Fail to measure FV.

**/
EFI_STATUS
EFIAPI
FirmwareVolmeInfoPpiNotifyCallback (
  IN EFI_PEI_SERVICES               **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR      *NotifyDescriptor,
  IN VOID                           *Ppi
  )
{
  EFI_PEI_FIRMWARE_VOLUME_INFO_PPI  *Fv;
  EFI_STATUS                        Status;
  EFI_PEI_FIRMWARE_VOLUME_PPI       *FvPpi;
  UINTN                             Index;

  Fv = (EFI_PEI_FIRMWARE_VOLUME_INFO_PPI *) Ppi;

  //
  // The PEI Core can not dispatch or load files from memory mapped FVs that do not support FvPpi.
  //
  Status = PeiServicesLocatePpi (
             &Fv->FvFormat,
             0,
             NULL,
             (VOID**)&FvPpi
             );
  if (EFI_ERROR (Status)) {
    return EFI_SUCCESS;
  }

  //
  // This is an FV from an FFS file, and the parent FV must have already been measured,
  // No need to measure twice, so just record the FV and return
  //
  if (Fv->ParentFvName != NULL || Fv->ParentFileName != NULL ) {

    if (mMeasuredChildFvIndex >= mMeasuredMaxChildFvIndex) {
      mMeasuredChildFvInfo = ReallocatePool (
                               sizeof (EFI_PLATFORM_FIRMWARE_BLOB) * mMeasuredMaxChildFvIndex,
                               sizeof (EFI_PLATFORM_FIRMWARE_BLOB) * (mMeasuredMaxChildFvIndex + FIRMWARE_BLOB_GROWTH_STEP),
                               mMeasuredChildFvInfo
                               );
      ASSERT (mMeasuredChildFvInfo != NULL);
      mMeasuredMaxChildFvIndex = mMeasuredMaxChildFvIndex + FIRMWARE_BLOB_GROWTH_STEP;
    }
    //
    // Check whether FV is in the measured child FV list.
    //
    for (Index = 0; Index < mMeasuredChildFvIndex; Index++) {
      if (mMeasuredChildFvInfo[Index].BlobBase == (EFI_PHYSICAL_ADDRESS) (UINTN) Fv->FvInfo) {
        return EFI_SUCCESS;
      }
    }
    mMeasuredChildFvInfo[mMeasuredChildFvIndex].BlobBase   = (EFI_PHYSICAL_ADDRESS) (UINTN) Fv->FvInfo;
    mMeasuredChildFvInfo[mMeasuredChildFvIndex].BlobLength = Fv->FvInfoSize;
    mMeasuredChildFvIndex++;
    return EFI_SUCCESS;
  }

  return MeasureFvImage ((EFI_PHYSICAL_ADDRESS) (UINTN) Fv->FvInfo, Fv->FvInfoSize);
}
Exemplo n.º 16
0
Arquivo: CpuBist.c Projeto: OznOg/edk2
/**
  Worker function to get CPUs' BIST by calling SecPlatformInformationPpi
  or SecPlatformInformation2Ppi.

  @param  PeiServices         Pointer to PEI Services Table
  @param  Guid                PPI Guid
  @param  PpiDescriptor       Return a pointer to instance of the
                              EFI_PEI_PPI_DESCRIPTOR
  @param  BistInformationData Pointer to BIST information data

  @retval EFI_SUCCESS         Retrieve of the BIST data successfully
  @retval EFI_NOT_FOUND       No sec platform information(2) ppi export
  @retval EFI_DEVICE_ERROR    Failed to get CPU Information

**/
EFI_STATUS
GetBistInfoFromPpi (
  IN CONST EFI_PEI_SERVICES     **PeiServices,
  IN CONST EFI_GUID             *Guid,
     OUT EFI_PEI_PPI_DESCRIPTOR **PpiDescriptor,
     OUT VOID                   **BistInformationData
  )
{
  EFI_STATUS                            Status;
  EFI_SEC_PLATFORM_INFORMATION2_PPI     *SecPlatformInformation2Ppi;
  EFI_SEC_PLATFORM_INFORMATION_RECORD2  *SecPlatformInformation2;
  UINT64                                InformationSize;

  Status = PeiServicesLocatePpi (
             Guid,                                // GUID
             0,                                   // INSTANCE
             PpiDescriptor,                       // EFI_PEI_PPI_DESCRIPTOR
             (VOID **)&SecPlatformInformation2Ppi // PPI
             );
  if (Status == EFI_NOT_FOUND) {
    return EFI_NOT_FOUND;
  }

  if (Status == EFI_SUCCESS) {
    //
    // Get the size of the sec platform information2(BSP/APs' BIST data)
    //
    InformationSize         = 0;
    SecPlatformInformation2 = NULL;
    Status = SecPlatformInformation2Ppi->PlatformInformation2 (
                                           PeiServices,
                                           &InformationSize,
                                           SecPlatformInformation2
                                           );
    if (Status == EFI_BUFFER_TOO_SMALL) {
      Status = PeiServicesAllocatePool (
                 (UINTN) InformationSize,
                 (VOID **) &SecPlatformInformation2
                 );
      if (Status == EFI_SUCCESS) {
        //
        // Retrieve BIST data
        //
        Status = SecPlatformInformation2Ppi->PlatformInformation2 (
                                               PeiServices,
                                               &InformationSize,
                                               SecPlatformInformation2
                                               );
        if (Status == EFI_SUCCESS) {
          *BistInformationData = SecPlatformInformation2;
          return EFI_SUCCESS;
        }
      }
    }
  }

  return EFI_DEVICE_ERROR;
}
Exemplo n.º 17
0
RETURN_STATUS
EFIAPI
PeCoffLoaderGetEntryPoint (
  IN     VOID  *Pe32Data,
  IN OUT VOID  **EntryPoint
  )
/*++

Routine Description:

  Loads a PE/COFF image into memory, this is not follow the original purpose of 
  PeCoffGetEntryPoint library class.  But it's ok that Unix package not run on a real 
  platform and this is for source level debug.

Arguments:

  Pe32Data   - Pointer to a PE/COFF Image

  EntryPoint - Pointer to the entry point of the PE/COFF image

Returns:

  EFI_SUCCESS            if the EntryPoint was returned
  EFI_INVALID_PARAMETER  if the EntryPoint could not be found from Pe32Data

--*/
{
  EFI_STATUS              Status;
  EFI_PEI_PPI_DESCRIPTOR  *PpiDescriptor;
  NT_PEI_LOAD_FILE_PPI    *PeiNtService;
  EFI_PHYSICAL_ADDRESS    ImageAddress;
  UINT64                  ImageSize;
  EFI_PHYSICAL_ADDRESS    ImageEntryPoint;

  ASSERT (Pe32Data   != NULL);
  ASSERT (EntryPoint != NULL);

  Status = PeiServicesLocatePpi (
             &gNtPeiLoadFilePpiGuid,
             0,
             &PpiDescriptor,
             (VOID**)&PeiNtService
             );
  ASSERT_EFI_ERROR (Status);

  Status = PeiNtService->PeiLoadFileService (
                           Pe32Data,
                           &ImageAddress,
                           &ImageSize,
                           &ImageEntryPoint
                           );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  *EntryPoint = (VOID*)(UINTN)ImageEntryPoint;
  return Status;
}
Exemplo n.º 18
0
EFI_STATUS
EFIAPI
PeimInitializeFlashMap (
  IN EFI_FFS_FILE_HEADER       *FfsHeader,
  IN EFI_PEI_SERVICES          **PeiServices
  )
/*++

Routine Description:
  Build GUIDed HOBs for platform specific flash map
  
Arguments:
  FfsHeader   - A pointer to the EFI_FFS_FILE_HEADER structure.
  PeiServices - General purpose services available to every PEIM.
    
Returns:
  EFI_STATUS

--*/
// TODO:    EFI_SUCCESS - add return value to function comment
{
  EFI_STATUS              Status;
  NT_FWH_PPI              *NtFwhPpi;
  EFI_PHYSICAL_ADDRESS    FdBase;
  UINT64                  FdSize;
  EFI_PEI_PPI_DESCRIPTOR  *PpiDescriptor;

  DEBUG ((EFI_D_ERROR, "NT 32 Flash Map PEIM Loaded\n"));

  //
  // Get the Fwh Information PPI
  //
  Status = PeiServicesLocatePpi (
            &gNtFwhPpiGuid, // GUID
            0,              // INSTANCE
            &PpiDescriptor, // EFI_PEI_PPI_DESCRIPTOR
            (VOID**)&NtFwhPpi       // PPI
            );
  ASSERT_EFI_ERROR (Status);

  //
  // Assume that FD0 contains the Flash map.
  //
  Status = NtFwhPpi->NtFwh (0, &FdBase, &FdSize);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Relocate the base of FV region 
  // 
  PcdSet32 (PcdFlashNvStorageVariableBase, PcdGet32 (PcdWinNtFlashNvStorageVariableBase) + (UINT32) FdBase);
  PcdSet32 (PcdFlashNvStorageFtwWorkingBase, PcdGet32 (PcdWinNtFlashNvStorageFtwWorkingBase) + (UINT32) FdBase);
  PcdSet32 (PcdFlashNvStorageFtwSpareBase, PcdGet32 (PcdWinNtFlashNvStorageFtwSpareBase) + (UINT32) FdBase);

  return EFI_SUCCESS;
}
Exemplo n.º 19
0
/**
  Publish Memory Type Information.

  @param   None

  @retval  EFI_SUCCESS     Success.
  @retval  Others          Errors have occurred.
**/
EFI_STATUS
EFIAPI
PublishMemoryTypeInfo (
  void
  )
{
  EFI_STATUS                      Status;
  EFI_PEI_READ_ONLY_VARIABLE2_PPI *Variable;
  UINTN                           DataSize;
  EFI_MEMORY_TYPE_INFORMATION     MemoryData[EfiMaxMemoryType + 1];

  Status = PeiServicesLocatePpi (
             &gEfiPeiReadOnlyVariable2PpiGuid,
             0,
             NULL,
             &Variable
             );
  if (EFI_ERROR (Status)) {
    DEBUG((EFI_D_ERROR, "WARNING: Locating Pei variable failed 0x%x \n", Status));
    DEBUG((EFI_D_ERROR, "Build Hob from default\n"));
    //
    // Build the default GUID'd HOB for DXE
    //
    BuildGuidDataHob (&gEfiMemoryTypeInformationGuid, mDefaultMemoryTypeInformation, sizeof (mDefaultMemoryTypeInformation) );

    return Status;
  }

  DataSize = sizeof (MemoryData);
  //
  // This variable is saved in BDS stage. Now read it back
  //
  Status = Variable->GetVariable (
                       Variable,
                       EFI_MEMORY_TYPE_INFORMATION_VARIABLE_NAME,
                       &gEfiMemoryTypeInformationGuid,
                       NULL,
                       &DataSize,
                       &MemoryData
                       );
  if (EFI_ERROR (Status)) {
    //
    // build default
    //
    DEBUG((EFI_D_ERROR, "Build Hob from default\n"));
    BuildGuidDataHob (&gEfiMemoryTypeInformationGuid, mDefaultMemoryTypeInformation, sizeof (mDefaultMemoryTypeInformation) );
  } else {
    //
    // Build the GUID'd HOB for DXE from variable
    //
    DEBUG((EFI_D_ERROR, "Build Hob from variable \n"));
    BuildGuidDataHob (&gEfiMemoryTypeInformationGuid, MemoryData, DataSize);
  }

  return Status;
}
Exemplo n.º 20
0
/**
  This is the entrypoint of PEIM

  @param[in] FileHandle  Handle of the file being invoked.
  @param[in] PeiServices Describes the list of possible PEI Services.

  @retval EFI_SUCCESS if it completed successfully.
**/
EFI_STATUS
EFIAPI
FspPeiEntryPoint (
  IN       EFI_PEI_FILE_HANDLE  FileHandle,
  IN CONST EFI_PEI_SERVICES     **PeiServices
  )
{
  FSP_INFO_HEADER      *FspHeader;
  EFI_STATUS           Status;
  FSP_INIT_DONE_PPI    *FspInitDone;
  VOID                 *FspHobList;
  EFI_BOOT_MODE        BootMode;

  DEBUG ((DEBUG_INFO, "FspPeiEntryPoint\n"));

  Status = PeiServicesLocatePpi (
             &gFspInitDonePpiGuid,
             0,
             NULL,
             (VOID **) &FspInitDone
             );
  if (EFI_ERROR (Status)) {
    //
    // 1st entry
    //
    DEBUG ((DEBUG_INFO, "1st entry\n"));
    FspHeader = FspFindFspHeader (PcdGet32 (PcdFlashFvFspBase));
    DEBUG ((DEBUG_INFO, "FspHeader - 0x%x\n", FspHeader));
    if (FspHeader == NULL) {
      return EFI_DEVICE_ERROR;
    }

    SecFspInit (FspHeader);

    //
    // Never return here
    //
    CpuDeadLoop ();
  } else {
    //
    // 2nd entry
    //
    DEBUG ((DEBUG_INFO, "2nd entry\n"));
    Status = FspInitDone->GetFspHobList (PeiServices, FspInitDone, &FspHobList);
    DEBUG ((DEBUG_INFO, "FspHobList - 0x%x\n", FspHobList));
    FspHobProcess (FspHobList);

    PeiServicesGetBootMode (&BootMode);
    if (BootMode == BOOT_ON_S3_RESUME) {
      Status = PeiServicesNotifyPpi (&mS3EndOfPeiNotifyDesc);
      ASSERT_EFI_ERROR (Status);
    }
  }

  return EFI_SUCCESS;
}
Exemplo n.º 21
0
EFI_STATUS
EFIAPI
PeimInitializeFlashMap (
  IN       EFI_PEI_FILE_HANDLE       FileHandle,
  IN CONST EFI_PEI_SERVICES          **PeiServices
  )
/*++

Routine Description:
  Build GUIDed HOBs for platform specific flash map

Arguments:
  FfsHeader   - A pointer to the EFI_FFS_FILE_HEADER structure.
  PeiServices - General purpose services available to every PEIM.

Returns:
  EFI_STATUS

**/
{
  EFI_STATUS              Status;
  EMU_THUNK_PPI           *Thunk;
  EFI_PEI_PPI_DESCRIPTOR  *PpiDescriptor;
  EFI_PHYSICAL_ADDRESS    FdBase;
  EFI_PHYSICAL_ADDRESS    FdFixUp;
  UINT64                  FdSize;

  DEBUG ((EFI_D_ERROR, "EmulatorPkg Flash Map PEIM Loaded\n"));

  //
  // Get the Fwh Information PPI
  //
  Status = PeiServicesLocatePpi (
            &gEmuThunkPpiGuid, // GUID
            0,                 // INSTANCE
            &PpiDescriptor,     // EFI_PEI_PPI_DESCRIPTOR
            (VOID **)&Thunk       // PPI
            );
  ASSERT_EFI_ERROR (Status);

  //
  // Assume that FD0 contains the Flash map.
  //
  Status = Thunk->FirmwareDevices (0, &FdBase, &FdSize, &FdFixUp);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  PcdSet64 (PcdFlashNvStorageVariableBase64, PcdGet64 (PcdEmuFlashNvStorageVariableBase) + FdFixUp);
  PcdSet64 (PcdFlashNvStorageFtwWorkingBase64, PcdGet64 (PcdEmuFlashNvStorageFtwWorkingBase) + FdFixUp);
  PcdSet64 (PcdFlashNvStorageFtwSpareBase64, PcdGet64 (PcdEmuFlashNvStorageFtwSpareBase) + FdFixUp);

  return EFI_SUCCESS;
}
Exemplo n.º 22
0
/**
  Initialize IOMMU.
**/
VOID
IoMmuInit (
  VOID
  )
{
  PeiServicesLocatePpi (
    &gEdkiiIoMmuPpiGuid,
    0,
    NULL,
    (VOID **)&mIoMmu
    );
}
Exemplo n.º 23
0
/**
  This interface returns whether TPM physical presence needs be locked or not.

  @param[in]  PeiServices       The pointer to the PEI Services Table.

  @retval     TRUE              The TPM physical presence should be locked.
  @retval     FALSE             The TPM physical presence cannot be locked.

**/
BOOLEAN
EFIAPI
LockTpmPhysicalPresence (
  IN CONST  EFI_PEI_SERVICES             **PeiServices
  )
{
  EFI_STATUS                         Status;
  EFI_PEI_READ_ONLY_VARIABLE2_PPI    *Variable;
  UINTN                              DataSize;
  EFI_PHYSICAL_PRESENCE              TcgPpData;

  //
  // The CRTM has sensed the physical presence assertion of the user. For example,
  // the user has pressed the startup button or inserted a USB dongle. The details
  // of the implementation are vendor-specific. Here we read a PCD value to indicate
  // whether operator physical presence.
  //
  if (!PcdGetBool (PcdTpmPhysicalPresence)) {
    return TRUE;
  }

  //
  // Check the pending TPM requests. Lock TPM physical presence if there is no TPM
  // request.
  //
  Status = PeiServicesLocatePpi (
             &gEfiPeiReadOnlyVariable2PpiGuid,
             0,
             NULL,
             (VOID **)&Variable
             );
  if (!EFI_ERROR (Status)) {
    DataSize = sizeof (EFI_PHYSICAL_PRESENCE);
    Status = Variable->GetVariable (
                         Variable,
                         PHYSICAL_PRESENCE_VARIABLE,
                         &gEfiPhysicalPresenceGuid,
                         NULL,
                         &DataSize,
                         &TcgPpData
                         );
    if (!EFI_ERROR (Status)) {
      if (TcgPpData.PPRequest != 0) {
        return FALSE;
      }
    }
  }

  //
  // Lock TPM physical presence by default.
  //
  return TRUE;
}
Exemplo n.º 24
0
/**
  Retrieve the pointer of EFI_PEI_PCD_PPI defined in PI 1.2 Vol 3.

  This function is to locate EFI_PEI_PCD_PPI PPI via PeiService. 
  If fail to locate EFI_PEI_PCD_PPI, then ASSERT_EFI_ERROR().
  
  @retval EFI_PEI_PCD_PPI * The pointer to the EFI_PEI_PCD_PPI.

**/
EFI_PEI_PCD_PPI *
GetPiPcdPpiPointer (
  VOID
  )
{
  EFI_STATUS        Status;
  EFI_PEI_PCD_PPI   *PiPcdPpi;
  
  Status = PeiServicesLocatePpi (&gEfiPeiPcdPpiGuid, 0, NULL, (VOID **)&PiPcdPpi);
  ASSERT_EFI_ERROR (Status);
  
  return PiPcdPpi;
}  
Exemplo n.º 25
0
/**
  Retrieve the GET_PCD_INFO_PPI pointer.

  This function is to locate GET_PCD_INFO_PPI PPI via PeiService. 
  If fail to locate GET_PCD_INFO_PPI, then ASSERT_EFI_ERROR().

  @retval GET_PCD_INFO_PPI * The pointer to the GET_PCD_INFO_PPI.

**/
GET_PCD_INFO_PPI *
GetPcdInfoPpiPointer (
  VOID
  ) 
{
  EFI_STATUS            Status;
  GET_PCD_INFO_PPI      *PcdInfoPpi;
  
  Status = PeiServicesLocatePpi (&gGetPcdInfoPpiGuid, 0, NULL, (VOID **)&PcdInfoPpi);
  ASSERT_EFI_ERROR (Status);

  return PcdInfoPpi;
}
Exemplo n.º 26
0
/**
  Do FSP initialization based on FspApi version 1.

  @param[in] FspHeader FSP header pointer.

  @return FSP initialization status.
**/
EFI_STATUS
PeiFspInitV1 (
  IN FSP_INFO_HEADER *FspHeader
  )
{
  EFI_STATUS           Status;
  FSP_INIT_DONE_PPI    *FspInitDone;
  VOID                 *FspHobList;
  EFI_BOOT_MODE        BootMode;
  
  Status = PeiServicesLocatePpi (
             &gFspInitDonePpiGuid,
             0,
             NULL,
             (VOID **) &FspInitDone
             );
  if (EFI_ERROR (Status)) {
    //
    // 1st entry
    //
    DEBUG ((DEBUG_INFO, "1st entry\n"));

    PeiFspInit (FspHeader);
    //
    // Never return here, for FspApi version 1.
    //
    CpuDeadLoop ();
  } else {
    //
    // 2nd entry for FspApi version 1 only.
    //
    DEBUG ((DEBUG_INFO, "2nd entry\n"));

    Status = FspInitDone->GetFspHobList (GetPeiServicesTablePointer (), FspInitDone, &FspHobList);
    ASSERT_EFI_ERROR (Status);
    DEBUG ((DEBUG_INFO, "FspHobList - 0x%x\n", FspHobList));
    FspHobProcess (FspHobList);
    
    //
    // Register EndOfPei Notify for S3 to run FspNotifyPhase
    //
    PeiServicesGetBootMode (&BootMode);
    if (BootMode == BOOT_ON_S3_RESUME) {
      Status = PeiServicesNotifyPpi (&mS3EndOfPeiNotifyDesc);
      ASSERT_EFI_ERROR (Status);
    }
  }

  return EFI_SUCCESS;
}
Exemplo n.º 27
0
/**
  Gets Smbus PPIs.

  This internal function retrieves Smbus PPI from PPI database.

  @param  VOID

  @return The pointer to Smbus PPI.

**/
EFI_PEI_SMBUS2_PPI *
InternalGetSmbusPpi (
  VOID
  )
{
  EFI_STATUS            Status;
  EFI_PEI_SMBUS2_PPI     *SmbusPpi;

  Status = PeiServicesLocatePpi (&gEfiPeiSmbus2PpiGuid, 0, NULL, (VOID **) &SmbusPpi);
  ASSERT_EFI_ERROR (Status);
  ASSERT (SmbusPpi != NULL);

  return SmbusPpi;
}
Exemplo n.º 28
0
EFI_STATUS
EFIAPI
BoardDetectionCallback (
  IN CONST EFI_PEI_SERVICES     **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR  *NotifyDescriptor,
  IN VOID                       *Ppi
  )
{
  EFI_STATUS   Status;
  VOID         *Instance;
  
  DEBUG ((EFI_D_INFO, "Detecting Galileo ...\n"));
  //
  // Check if board detection is finished.
  //
  Status = PeiServicesLocatePpi (
             &gBoardDetectedPpiGuid,
             0,
             NULL,
             &Instance
             );
  if (!EFI_ERROR(Status)) {
    return EFI_SUCCESS;
  }

  //
  // In most real platform, here should be the code to detect board type.
  // 
  // For galileo, we only support build time board selection, so use PCD to do the fake detection.
  //
  if (PcdGet16(PcdPlatformType) != Galileo) {
    return EFI_UNSUPPORTED;
  }
  DEBUG ((EFI_D_INFO, "Detected Galileo!\n"));

  Status = PcdSet64S (PcdBoardInitPreMem, (UINT64)(UINTN)BoarInitPreMem);
  ASSERT_EFI_ERROR(Status);
  Status = PcdSet64S (PcdBoardInitPostMem, (UINT64)(UINTN)BoarInitPostMem);
  ASSERT_EFI_ERROR(Status);

  Status = PcdSet32S (PcdPciExpPerstResumeWellGpio, PCIEXP_PERST_RESUMEWELL_GPIO);
  ASSERT_EFI_ERROR(Status);
  Status = PcdSet32S (PcdFlashUpdateLedResumeWellGpio, GALILEO_FLASH_UPDATE_LED_RESUMEWELL_GPIO);
  ASSERT_EFI_ERROR(Status);

  Status = PeiServicesInstallPpi(&mDetectedPpi);
  ASSERT_EFI_ERROR(Status);
  return Status;
}
Exemplo n.º 29
0
/**
  The constructor function caches the pointer to PEI services.

  The constructor function caches the pointer to PEI services.
  It will always return EFI_SUCCESS.

  @param  FfsHeader   Pointer to FFS header the loaded driver.
  @param  PeiServices Pointer to the PEI services.

  @retval EFI_SUCCESS   The constructor always returns EFI_SUCCESS.

**/
EFI_STATUS
EFIAPI
Tpm2DeviceLibConstructor (
  VOID
  )
{
  EFI_STATUS  Status = EFI_SUCCESS;
  
  Status = PeiServicesLocatePpi (&gPttPassThruPpiGuid, 0, NULL, (VOID **) &SecPttPassThruPpi);
  if (EFI_ERROR (Status)) {
     // Locate the PPI failed
     SecPttPassThruPpi = NULL;
  }
  return Status;
}
Exemplo n.º 30
0
/**
  The function is provided by PCD PEIM and PCD DXE driver to
  do the work of reading a HII variable from variable service.

  @param VariableGuid     The Variable GUID.
  @param VariableName     The Variable Name.
  @param VariableData    The output data.
  @param VariableSize    The size of the variable.

  @retval EFI_SUCCESS         Operation successful.
  @retval EFI_NOT_FOUND         Variablel not found.
**/
EFI_STATUS
GetHiiVariable (
  IN  CONST EFI_GUID      *VariableGuid,
  IN  UINT16              *VariableName,
  OUT VOID                **VariableData,
  OUT UINTN               *VariableSize
  )
{
  UINTN      Size;
  EFI_STATUS Status;
  VOID       *Buffer;
  EFI_PEI_READ_ONLY_VARIABLE2_PPI *VariablePpi;

  Status = PeiServicesLocatePpi (&gEfiPeiReadOnlyVariable2PpiGuid, 0, NULL, (VOID **) &VariablePpi);
  ASSERT_EFI_ERROR (Status);

  Size = 0;
  Status = VariablePpi->GetVariable (
                          VariablePpi,
                          VariableName,
                          (EFI_GUID *) VariableGuid,
                          NULL,
                          &Size,
                          NULL
                          );

  if (Status == EFI_BUFFER_TOO_SMALL) {
    Status = PeiServicesAllocatePool (Size, &Buffer);
    ASSERT_EFI_ERROR (Status);

    Status = VariablePpi->GetVariable (
                              VariablePpi,
                              (UINT16 *) VariableName,
                              (EFI_GUID *) VariableGuid,
                              NULL,
                              &Size,
                              Buffer
                              );
    ASSERT_EFI_ERROR (Status);

    *VariableSize = Size;
    *VariableData = Buffer;

    return EFI_SUCCESS;
  }

  return EFI_NOT_FOUND;
}