/****************************************************************************
DESCRIPTION
Called after the configuration has been read and will trigger buttons events
if a pio has been pressed or held whilst the configuration was still being loaded
, i.e. the power on button press
*/
void ButtonsCheckForChangeAfterInit(void)
{
uint32 pio_state;
ButtonsTaskData * lButtonsTask = theHeadset.theButtonsTask ;
lButtonsTask->gBTime = B_INVALID ;
{
/* get 32 bit pio state for BC5 onwards chips */
pio_state = (((PIOGET() & 0xffff) | CHARGER_VREG_VALUE | CHARGER_CONNECT_VALUE)) ;
/* perform a level detect looking for transistion of recently added button definition, mask pio's
against level configured pios to prevent false butotn press indications */
ButtonsLevelDetect ( (pio_state & lButtonsTask->gPerformLevelCheck) , lButtonsTask ) ;
/* perform an edge detect looking for transistion of recently added button definition, mask pio's
against edge configured pios to prevent false button press indications */
ButtonsEdgeDetect ( (pio_state & lButtonsTask->gPerformEdgeCheck) , lButtonsTask) ;
}
/* store current set pio state in order to be able to detect the transition of a PIO in the button handler */
lButtonsTask->gOldPioState = pio_state;
/* Debounce required PIO lines */
pio_state = PioDebounce32((0xFFFF & lButtonsTask->gButtonLevelMask), /* mask off upper 16 bits */
lButtonsTask->button_config->debounce_number,
lButtonsTask->button_config->debounce_period_ms );
/* check whether it has been possible to select the use of PIOs specified, if it was not possible
to use all the PIOs specified due to a PIO being assigned a different function by PSKEY then none
of the PIOs will now work so mask out the unavailable PIO and assign the PIOs that are available
for receiving change notifications */
if(pio_state)
{
/* mask out the unavailable PIOs and register those PIOs that are available for receiving change events */
PioDebounce32((0xFFFF & lButtonsTask->gButtonLevelMask & ~pio_state), /* mask off upper 16 bits */
lButtonsTask->button_config->debounce_number,
lButtonsTask->button_config->debounce_period_ms );
B_DEBUG(("B: **** ERROR **** PIO NOT AVAILABLE = 0x%lx\n",pio_state)) ;
#ifdef DEBUG_BUTTONS
Panic();
#endif
}
#ifdef BHC612_
ChargerDebounce( (CHARGER_VREG_EVENT|CHARGER_CONNECT_EVENT), 4, 250 );
#else
ChargerDebounce( (CHARGER_VREG_EVENT|CHARGER_CONNECT_EVENT), lButtonsTask->button_config->debounce_number, lButtonsTask->button_config->debounce_period_ms );
#endif
}
int main(void)
{
/* Set app_handler() function to handle app's messages */
app.task.handler = app_handler;
/* Set app task to receive PIO messages */
MessagePioTask(&app.task);
/* Setup PIO interrupt messages */
PioDebounce32(BUTTON_A | BUTTON_B, /* PIO pins we are interested in */
2, 20); /* 2 reads and 20ms between them */
MessageLoop();
return 0;
}
