int Input_Regcode()
{
unsigned int key ;
BYTE pos = 0 ;
BYTE str_flag = FALSE ;
int x = 58 ;
int y = 26 ;
int ptr = -1 ;
PopUpWin(3) ;
locatestr(15,22);
printf("机器码%s",(unsigned char*)m_id) ;
GetKey(&key) ;
Bdisp_AllClr_DDVRAM() ;
PopUpWin(3) ;
printf("注册码 ") ;
DrawRect(56,23,12,53) ;
while(str_flag != TRUE)
{
GetKey(&key) ;
switch (key) {
case KEY_CTRL_EXE:
regstr[pos] = '\0' ;
str_flag =TRUE ;
break ;
case KEY_CTRL_ALPHA:
break ;
case KEY_CTRL_DEL:
if (pos) regstr[--pos] = '\0' ;
PrintXY(x, y, (unsigned char *)" ", 0) ;
break ;
default: break ;
}
/* Numbers and characters */
if ( (pos < 8) &&
((key >= KEY_CHAR_0 && key <= KEY_CHAR_9) ||
(key >= KEY_CHAR_A && key <= KEY_CHAR_Z)) ) {
regstr[pos] = (char)key ;
++pos ;
}
PrintXY(x, y, (unsigned char *)regstr, 0) ;
}
return ;
}
void memory_error(char *from, char *func, int val)
{
unsigned int key;
char info[20];
if(!memory_errors) return;
sprintf(info,"%d",val);
PopUpWin(6);
locate(4,2); Print((unsigned char *)"Memory ERROR !!");
locate(3,4); Print((unsigned char *)"FROM:");
locate(8,4); Print((unsigned char *)from);
locate(3,5); Print((unsigned char *)"FUNC:");
locate(8,5); Print((unsigned char *)func);
locate(3,6); Print((unsigned char *)"INFO:");
locate(8,6); Print((unsigned char *)info);
locate(3,7); Print((unsigned char *)"META:");
locate(8,7);
switch(val)
{
case 1: Print((unsigned char *)"NotEnoughRAM"); break;
case -1: Print((unsigned char *)"Nonexisting"); break;
case -5: Print((unsigned char *)"WrongDevice"); break;
case -8: Print((unsigned char *)"AccessDenied"); break;
case -14: Print((unsigned char *)"ReadOnly"); break;
case -31: Print((unsigned char *)"DeviceError"); break;
case -35: Print((unsigned char *)"NotEmpty"); break;
default: Print((unsigned char *)"Other"); break;
}
GetKey(&key);
}
int WheterSavaASPM()
{
char str[13]="";
int suc,enter,i;
for (i=0;i<13 && setup_data.jdfroute_name[i] != '.';++i)
str[i] = setup_data.jdfroute_name[i];
str[i>=13 ? 12 : i] = 0;
PopUpWin(4);
DispStr(24,8,"\xce\xc4\xbc\xfe\xc3\xfb(*.pm)");//file_name
do
{
suc = InputString(24,24,str,1,8);
if (suc==KEY_CTRL_EXIT) break;
if (! str[0]) continue;
}while(suc!=KEY_CTRL_EXE);
if(suc!=KEY_CTRL_EXIT)
{
enter = 1;
strcat(str,".pm");
if (TestPMFile(str))
{
enter = WhetherCoverPM();
}
if (enter)
{
SavePMFile(str);
strcpy(setup_data.pmroute_name,str);
}
}
}
int SelectRoot(void)
{
unsigned int key ;
int ret = 0 ;
SaveDisp(SAVEDISP_PAGE3) ;
PopUpWin(4) ;
Print_zh("1.内置闪存 ", 14, 11, 0) ;
Print_zh("2.SD卡 ", 14, 25, 0) ;
GetKey(&key) ;
switch (key)
{
case KEY_CHAR_1:
Fls_F = TRUE ; SDcard_F = FALSE ;
break ;
case KEY_CHAR_2:
SDcard_F = TRUE ; Fls_F = FALSE ;
break ;
default:
ret = 1 ;
break ;
}
RestoreDisp(SAVEDISP_PAGE3) ;
return ret ;
}
int WhetherCoverPM()
{
int enter;
PopUpWin(5);
DispStr(48,12,"覆盖?"); //fugai
locate(7,5);Print("Yes : [F1]");
locate(7,6);Print("No : [F6]");
do{
GetKey(&key);
if (key==KEY_CTRL_F6 || key==KEY_CTRL_EXIT){enter =0 ;break;}
else if (KEY_CTRL_F1) {enter = 1;break;}
}while(1);
return enter;
}
int Suidao_DM(void)
{
int display = 0;
double sd_pj = 0.0 ; /* 测点与中线的距离 */
double sd_gc = 0.0 ; /* 测点与设计线的高差 */
unsigned int key = 0 ;
unsigned int back_key ;
BYTE exit_flag = FALSE;
BYTE xyrow = 0 ;
int shuaxin = TRUE; /* 刷新 */
while (exit_flag != TRUE) {
switch(key) {
case KEY_CTRL_F1: default:
if (key == KEY_CTRL_F1) shuaxin == TRUE;
if (shuaxin){
Bdisp_AllClr_DDVRAM() ;
Print_zh("隧道断面 ", 0, 1, VERT_REV) ;
PrintIcon (0,"Home",0);
PrintIcon (1,"Set",0);
PrintIcon (2,"SQX",0);
PrintIcon (3,"DM",0);
(R_L > 0) ? PrintIcon (4,"YOU",0) : PrintIcon (4,"ZUO",1);
PrintIcon (5,"Help",0);
shuaxin = FALSE;
}
back_key = key ;
Bdisp_AreaClr_DDVRAM(&clear_area) ;
Print_zh("X坐标 ", 20, 6, 0) ;
Print_zh("Y坐标 ", 20, 22, 0) ;
Print_zh("Z坐标 ", 20, 38, 0) ;
if (xyrow > 2) {
if (!sd_flag) {
Warning("未载入断面 ",2);
//exit_flag = TRUE ; //强制退出以解决卡在载入数据界面的问题 fix by 龙之冰点
xyrow = 0; /* 把焦点设置在TOP */
key = KEY_CTRL_F4;
break ;
}
xyrow = 0 ;
x = sd_x ;
y = sd_y ;
SaveDisp(SAVEDISP_PAGE2) ;
if (InputStake(FS_NOPOPUP) == FSOK){
number = fs_zh ;
if (!GC_JS(number)) break ;
RestoreDisp(SAVEDISP_PAGE2) ;
Bdisp_AreaClr_DDVRAM(&clear_area) ;
sd_gc = sd_z - DesignGC;
if (!yanxin(fs_pj, sd_gc)){
Warning("断面计算失败 ",2);
key == KEY_CTRL_F1;
break ;
}
Print_zh("桩号K ", 20, 0, 0) ;
Print_zh("偏距D ", 20, 13, 0) ;
Print_zh("高差H ", 20, 26, 0) ;
if (sd_cqw < 0) Print_zh("欠挖W ", 20, 39, 0) ;
else Print_zh("超挖T ", 20, 39, 0) ;
Print_C(120, 4, CA = fs_zh, 3) ;
Print_C(120, 17, CA = fs_pj, 3) ;
Print_C(120, 30, CA = sd_gc, 3) ;
Print_C(120, 43, CA = sd_cqw, 3) ;
key = 0 ;
while(key != KEY_CTRL_EXE && key != KEY_CTRL_EXIT) GetKey(&key) ;
key = KEY_CTRL_F1 ;
break ;
}
RestoreDisp(SAVEDISP_PAGE2) ;
}
Print_C(112, 10, CA = sd_x, 3) ;
Print_C(112, 26, CA = sd_y, 3) ;
Print_C(112, 42, CA = sd_z, 3) ;
key = InputVal(59, 8+xyrow*16) ;
switch (xyrow) {
case 0: sd_x = number ? number : sd_x ; break ;
case 1: sd_y = number ? number : sd_y; break ;
case 2: sd_z = number ? number : sd_z; break ;
default: break ;
}
if (key >= KEY_CTRL_F1 && key <= KEY_CTRL_F6) xyrow = 0 ;
break ;
case KEY_CTRL_F2:
back_key = key ;
Bdisp_AreaClr_DDVRAM(&clear_area) ;
Print_zh("修正H ", 20, 6, 0) ;
Print_zh("修正D ", 20, 22, 0) ;
Print_zh("修正R ", 20, 38, 0) ;
if (xyrow > 2) { /* 返回上一个菜单 */
key = KEY_CTRL_F1 ;
xyrow = 0 ;
break ;
}
Print_C(112, 10, CA = sd_h, 3) ;
Print_C(112, 26, CA = sd_d, 3) ;
Print_C(112, 42, CA = sd_r, 3) ;
key = InputValP(59, 8+xyrow*16) ;
switch (xyrow) {
case 0: sd_h = number ? number : sd_h ; break ;
case 1: sd_d = number ? number : sd_d ;break ;
case 2: sd_r = number ? number : sd_r ; break ;
default: break ;
}
if (key >= KEY_CTRL_F1 && key <= KEY_CTRL_F6) xyrow = 0 ;
break ;
case KEY_CTRL_F3:
SaveDisp(SAVEDISP_PAGE2) ;
if (sqx_flag == TRUE) {
if ( InputSQstake() == TRUE) {
if (InputSQpj() == TRUE) { /* 输入偏距 */
DesignGC = Cut_3(DesignGC) ;
PopUpWin(3);
locatestr(12,22) ;
printf("高程:%.3f",DesignGC ) ;
GetKey(&key);
}
}
}
else DebugS("未载入竖曲线 ") ;
key = back_key ;
RestoreDisp(SAVEDISP_PAGE2) ;
break ;
case KEY_CTRL_F4:
sd_flag = load_SD_data(sd_flag) ;
key = KEY_CTRL_F1 ;
shuaxin = TRUE;
break ;
case KEY_CTRL_F5:
if (R_L == -1){
R_L = 1;
Warning("应用在右幅 ",2);
}
else{
R_L = -1;
Warning("应用在左幅 ",2);
}
key = KEY_CTRL_F1 ;
shuaxin = TRUE;
break ;
case KEY_CTRL_F6:
Bdisp_AllClr_DDVRAM() ;
Print_zh("Home=刷新页面 ", 1, 2, 0) ;
Print_zh("Set =断面数据修正 ", 1, 16, 0) ;
Print_zh("SQX =竖曲线高程 ", 1, 30, 0) ;
Print_zh("DM =选择断面文件 ", 1, 44, 0) ;
GetKey(&key);
Bdisp_AllClr_DDVRAM() ;
Print_zh("ZUO =应用在左幅 ", 1, 2, 0) ;
Print_zh("YOU =应用在右幅 ", 1, 16, 0) ;
Print_zh("修正H=改变圆心高差 ", 1, 30, 0) ;
Print_zh(" (+上移 -下移)", 1, 44, 0) ;
GetKey(&key);
Bdisp_AllClr_DDVRAM() ;
Print_zh("修正D=改变圆心偏距 ", 1, 2, 0) ;
Print_zh(" (+右移 -左移) ", 1, 16, 0) ;
Print_zh("修正R=改变设计半径 ", 1, 30, 0) ;
Print_zh(" (+变长 -变短)", 1, 44, 0) ;
GetKey(&key);
key = KEY_CTRL_F1 ;
shuaxin = TRUE;
break ;
case KEY_CTRL_UP:
if (xyrow > 0) --xyrow ;
key = back_key ;
break ;
case KEY_CTRL_DOWN:
case KEY_CTRL_EXE:
++xyrow ;
key = back_key ;
break ;
case KEY_CTRL_DEL:
key = back_key ;
break ;
case KEY_CTRL_EXIT :
exit_flag = TRUE ;
break ;
}
}
return ;
}
int SelectfilePM()
{
index = 0;
need_redraw = REDRAW_PART;
SetMyFont(&stHz12x12,&stAsc6x12);
while(1)
{
if (need_redraw == REDRAW_PART)
{
PopUpWin(6);
DrawPicture(32,9, 16, 10, G_ICON_SAVE); DispStr(48,8,"保存为 ");
DrawPicture(32,25, 16, 10, G_ICON_OPEN); DispStr(48,24,"打开 ");
DrawPicture(32,41, 16, 10, G_ICON_OTHER); DispStr(48,40,"新建 ");
Bdisp_AreaReverseVRAM(14,8+16*index,112,20+index*16);
}
GetKey(&key);
if (key==KEY_CTRL_UP) {if(--index<0) index = 2;need_redraw = REDRAW_PART;}
if (key==KEY_CTRL_DOWN) {if(++index>2) index = 0;need_redraw = REDRAW_PART;}
if (key==KEY_CTRL_EXIT) break;
if (key==KEY_CTRL_EXE)
{
char str[13]="";
int suc,enter,i;
switch(index)
{
case 0:
for (i=0;i<13 && setup_data.pmroute_name[i] != '.';++i)
str[i] = setup_data.pmroute_name[i];
str[i>=13 ? 12 : i] = 0;
PopUpWin(4);
DispStr(24,8,"\xce\xc4\xbc\xfe\xc3\xfb(*.pm)");//file_name
do
{
suc = InputString(24,24,str,1,8);
if (suc==KEY_CTRL_EXIT) break;
if (! str[0]) continue;
}while(suc!=KEY_CTRL_EXE);
if(suc!=KEY_CTRL_EXIT)
{
enter = 1;
strcat(str,".pm");
if (TestJDFFile(str))
{
PopUpWin(5);
DispStr(48,12,"覆盖?"); //fugai
locate(7,5);Print("Yes : [F1]");
locate(7,6);Print("No : [F6]");
do{
GetKey(&key);
if (key==KEY_CTRL_F6 || key==KEY_CTRL_EXIT){enter =0 ;break;}
else if (KEY_CTRL_F1) {enter = 1;break;}
}while(1);
}
if (enter)
{
SavePMFile(str);
strcpy(setup_data.pmroute_name,str);
}
}
break;
case 1:
suc = SelectPMFile (str);
if (suc==-1)
{
PopUpWin(1);
locate(7,4);Print("No File!");
GetKey(&key);
}
if(suc==1)
{
LoadPMFile (str);
strcpy(setup_data.pmroute_name,str);
if(LoadPMFile (setup_data.pmroute_name)==1)
SaveIniPMFile();
goto EXIT;
}
case 2:
PopUpWin(5);
DispStr(48,12,"新建?");
locate(7,5);Print("Yes : [F1]");
locate(7,6);Print("No : [F6]");
GetKey(&key);
if (key==KEY_CTRL_F1){
PopUpWin(5);
DispStr(40,12,"保存数据?");
locate(7,5);Print("Yes : [F1]");
locate(7,6);Print("No : [F6]");
GetKey(&key);
if(key==KEY_CTRL_F1)
{
if(setup_data.pmroute_name[0]==0)
{
WheterSavaASPM();
}
else
{
SavePMFile(setup_data.pmroute_name);
}
}
setup_data.pmroute_name[0]=0;
pmroute_initial(&pmroute);
pmroute_push_back(&pmroute);
goto EXIT;
}
break;
default:break;
}
need_redraw = REDRAW_PART;
}
}
EXIT:
return 0;
}
int PM_parameter()
{
char * table_label[]= {"DH","QDZH","ZDZH","X","Y","FWJ","ZX","QDBJ","ZDBJ"};
char * icons[] = {"","","","",""};
char * ch_text[] = {"\xb5\xe3\xc3\xfb",
"起点桩号",
"终点桩号",
"X坐标 ",
"Y坐标 ",
"方位角 ",
"转向 ",
"起点半径",
"终点半径"};
int x = 0,y = 0,i,j,t;
int left = 0,top = 0;
int refresh = REDRAW_ALL;
int enter,suc;
char str[13]="";
char c;
PMproduce(); //打开交点参数转换平面参数
InsertLine(l_pqx.length,&y,&refresh);
GetListq(); //取链表链表线元参数
while(1){
if (refresh==REDRAW_ALL){
Bdisp_AllClr_VRAM();
for (i=0;i<4;++i)
PrintTablesPM(i,0,table_label[left+i],1,1);
t = pmroute.size<= 1 ? 2 : 5; //如果交点个数小于等于1 那么T=2 否则等于5
if (t>=2){
SetMyFont(&stHz8x8,&stAsc6x12);
DispStr(2,56,"\xCE\xC4\xBC\xFE");
DispStr(23,56,"添加");
}
if (t>2){
SetMyFont(&stHz8x8,&stAsc6x12);
DispStr(45,56,"插入 ");
DispStr(65,56,"删行 ");
DispStr(86,56,"清空 ");
}
for (i=0;i< t;++i) // i<2 或 i<5
PrintIcon(i,icons[i],0); //打印下标
PrintIcon(5,"?",0); //固定打印下标
refresh = REDRAW_PART; // 重画部分
}
if (refresh==REDRAW_PART){ //如果画部分
double * sd;
for (i=top;i<top+4 && i<pmroute.size;++i){
sd = & (pmroute.set[i].pm_qk);
for (j=(left==0 ? 1:0);j<4;++j){
//if (i==0 && j+left>3) //////////////////////////////////////////
//PrintTablesPM(j,i+1-top,"",y==i && x-left==j,0);///////////////
//else/////////
PrintTableFormatPM(j,i+1-top,y==i && x-left==j,0,"%lf",sd[j+left-1]);
}
if (left==0)
PrintTableFormatPM(0,i+1-top,y==i && x-left==0,0,"%s",pmroute.set[i].name);
PrintTableIndexPM(i-top+1,i);
}
SetMyFont(&stHz12x12,&stAsc6x12);
if(x>0){
//if (!(y==0 && x>2)){
sd = & (pmroute.set[y].pm_qk); //取地址的值***************
DispStr(0,42,ch_text[x]);
PrintFloat(sd[x-1],49,42,0,setup_data.point); //打印
//}
}else{
DispStr(0,42,ch_text[x]);
PrintXY(51,44,pmroute.set[y].name,0);
}
refresh = 0;
}
GetKey(&key);
switch (key){
case KEY_CTRL_UP:
y--;refresh = REDRAW_ALL;break;
case KEY_CTRL_DOWN:
y++;refresh = REDRAW_ALL;break;
case KEY_CTRL_LEFT:
x--;refresh = REDRAW_ALL;break;
case KEY_CTRL_RIGHT:
x++;refresh = REDRAW_ALL;break;
case KEY_CTRL_EXIT:
pmroute_initial(&pmroute);
InitList(&l_pqx);
return 0 ;
case KEY_CTRL_F1: /* Set */
refresh = REDRAW_ALL;
SelectfilePM();
break;
case KEY_CTRL_F2: /* Add */
pmroute_push_back (&pmroute);
y = pmroute.size - 1;
refresh = REDRAW_ALL;
break;
case KEY_CTRL_F3: /* ins */
//if (y==0) break;
pmroute_insert (&pmroute,y);
y++;
refresh = REDRAW_ALL;
break;
case KEY_CTRL_F4: /* Del a point */
//if (y==0) break;
refresh = REDRAW_ALL;
PopUpWin(4);DispStr(25,10,"删 除 一 行?");
locate(3,5);Print("[F1]Yes [F6]No");
GetKey(&key);
if (key==KEY_CTRL_F1){
pmroute_del(&pmroute,y);y--;
}
break;
case KEY_CTRL_F5: /* Del All */
refresh = REDRAW_ALL;
PopUpWin(4);DispStr(25,10,"清 空 所 有 ?");
locate(3,5);Print("[F1]Yes [F6]No");
GetKey(&key);
if (key==KEY_CTRL_F1){
pmroute_initial(&pmroute);
pmroute_push_back(&pmroute);
}
break;
case KEY_CTRL_F6:
refresh = REDRAW_ALL;
//PrintfXY (70,30,0,"%.3f",route.set[0].xy_zr);
//DispStr(15,10,"线路名称");
//if(setup_data.pmroute_name[0]==0)
//{
//DispStr(25,27,"请保存线路文件 ");
//}
//else
//{
//DispStr(25,27,setup_data.zdmroute_name);
//}
break;
default: /*other things*/
if (x>0 && (c=GetPressNumChar(key))!=0){
char buffer[14];
int r;
//if (y==0 && x > 3)break;
buffer[0] = c;
buffer[1] = '\0';
r = InputString(49,42,buffer,0,12);
if (r!=KEY_CTRL_EXIT){
double * sd;
sd = (double*)&(pmroute.set[y].pm_qk);
sd[x-1] = atof(buffer);
switch(r){
case KEY_CTRL_UP: y--;break;
case KEY_CTRL_DOWN: y++;break;
case KEY_CTRL_EXE: x++;break;
}
}
refresh = REDRAW_ALL;
}
else if (x==0 && (c=GetPressChar(key))!=0){
char buffer[14];
int r;
buffer[0] = c;
buffer[1] = '\0';
r = InputString(49,42,buffer,1,12);
if (r!=KEY_CTRL_EXIT){
strncpy(pmroute.set[y].name,buffer,12);
switch(r){
case KEY_CTRL_UP: y--;break;
case KEY_CTRL_DOWN: y++;break;
case KEY_CTRL_EXE: x++;break;
}
}
refresh = REDRAW_ALL;
}
break;
}
if (x<0) x = 8,y--;
if (x>8) x = 0,y++;
if (y<0) y = 0;
if (y>=pmroute.size) y = pmroute.size - 1;
if (y>top + 3) top = y - 3;
if (y<top) top = y;
if (x>left +3) left = x - 3;
if (x<left) left = x;
}
}
