static int PutSumHdrInfo (SingleGroup *out, double sumexptime, double expend, int nimages, int nimsets) {
/* arguments:
SingleGroup *out i: current imset
double *exptime i: accumulated exposure time
double *expend i: last exposure end time read from input file
int nimages i: the number of imsets that were combined
*/
extern int status;
int PutKeyDbl (Hdr *, char *, double, char *);
int PutKeyInt (Hdr *, char *, int, char *);
int PutKeyStr (Hdr *, char *, char *, char *);
/* Set the switch to indicate that rptcorr has been done. */
if (PutKeyStr (out->globalhdr, "RPTCORR", "COMPLETE",
"add individual repeat observations"))
return (status);
/* Write history records. */
addHistoryKw (out->globalhdr, "RPTCORR complete");
if (hstio_err())
return (status = HEADER_PROBLEM);
addHistoryKw (out->globalhdr, "Statistics computed after rptcorr.");
if (hstio_err())
return (status = HEADER_PROBLEM);
/* Update NEXTEND in primary header, to indicate only one imset. */
if (PutKeyInt (out->globalhdr, "NEXTEND", EXT_PER_GROUP * nimsets,
"number of extensions"))
return (status);
/* Update NCOMBINE in primary header, to tell how many imsets were
combined into this one output imset.
*/
if (PutKeyInt (out->globalhdr, "NCOMBINE", nimages,
"number of imsets combined"))
return (status);
/* Update exposure time info in SCI extension header. */
if (PutKeyDbl (out->globalhdr, "EXPTIME", sumexptime, "exposure time"))
return (status);
if (PutKeyDbl (out->globalhdr, "EXPEND", expend, "exposure end time"))
return (status);
return (status);
}
/* acsrej_do -- Perform the cosmic ray rejection for ACS images
Description:
------------
This is mostly a file bookkeeping routine for the cosmic ray rejection task.
It takes care of input/output files open/close, check for dimensions, read/
write data from/to files, allocate memory spaces etc.
Date Author Description
---- ------ -----------
06-May-1996 J.-C. Hsu Adapt from the SPP code crrej_do.x
05-Aug-1998 W. Hack Modified to handle ACS data
11-Feb-1999 W. Hack EXPTIME now in Pri. Hdr.
18-Mar-1999 W.J. Hack Revised to read EXPTIMEs from Primary headers
for cr_scaling using tpin directly
14-Sep-1999 W.J. Hack Cleaned up SHADCORR usage. Added check for max
number of files here.
*/
int acsrej_do (IRAFPointer tpin, char *outfile, char *mtype, clpar *par, int newpar[])
{
extern int status;
IODescPtr ipsci[MAX_FILES]; /* science image descriptor */
IODescPtr ipdq[MAX_FILES]; /* data quality image descriptor */
float skyval[MAX_FILES]; /* background DN values */
float efac[MAX_FILES]; /* exposure factors */
multiamp noise; /* readout noise */
multiamp gain; /* A-to-D gain factors */
float exptot;
float texpt;
int nimgs;
SingleGroup sg;
int niter = 0;
float sigma[MAX_ITER];
Hdr phdr; /* primary header */
int extver; /* Current extension being processed*/
int numext; /* Number of extensions in each image */
int nextend; /* Number of output extensions */
char imgname[MAX_FILES][CHAR_FNAME_LENGTH];
char fimage[CHAR_FNAME_LENGTH]; /* Name of first image in list */
char root[CHAR_FNAME_LENGTH]; /* ROOTNAME for output CRJ file */
char uroot[CHAR_FNAME_LENGTH]; /* Upper case version of rootname */
char *shadrefname;
int ext[MAX_FILES];
int dim_x, dim_y; /* image dimensions */
int i, j, n; /* loop indices */
float *efacsum, *work;
int nrej; /* total number of rejected pixels */
float skysum; /* total sky level */
int logit;
RefImage shadref;
int shadswitch;
double expend, expstart;
int non_zero; /* number of input images with EXPTIME>0.*/
int found;
char imgdefault[CHAR_FNAME_LENGTH]; /* name of first input image with EXPTIME > 0. */
int GetSwitch (Hdr *, char *, int *);
int UpdateSwitch (char *, int, Hdr *, int *);
void InitRefImg (RefImage *);
int ImgHistory (const RefImage *, Hdr *);
int ImgPedigree (RefImage *);
int acsrej_check (IRAFPointer, int, int, clpar *, int [], char [][CHAR_FNAME_LENGTH],
int [], IODescPtr [], IODescPtr [],
multiamp *, multiamp *, int *,
int *, int);
int cr_scaling (char *, IRAFPointer, float [], int *, double *, double *);
int rejpar_in(clpar *, int [], int, float, int *, float []);
void acsrej_sky (char *, IODescPtr [], IODescPtr [], int, short, float []);
void cr_history (SingleGroup *, clpar *, int);
int acsrej_init (IODescPtr [], IODescPtr [], clpar *, int, int, int,
multiamp, multiamp, float [], float [],
SingleGroup *, float *);
int acsrej_loop (IODescPtr [], IODescPtr [], char [][CHAR_FNAME_LENGTH],
int [], int, clpar *, int, int, int, float [],
multiamp, multiamp, float [], float [],
FloatTwoDArray *, FloatTwoDArray *, float *,
ShortTwoDArray *, int *, char *);
int PutKeyFlt (Hdr *, char *, float, char *);
int PutKeyDbl (Hdr *, char *, double, char *);
int PutKeyStr (Hdr *, char *, char *, char *);
int GetKeyStr (Hdr *, char *, int, char *, char *, int);
int PutKeyInt (Hdr *, char *, int, char *);
int GetKeyInt (Hdr *, char *, int, int, int *);
void UFilename (char *, Hdr *);
void UMemType (char *, Hdr *);
void UExpname (char *, Hdr *);
int LoadHdr (char *, Hdr *);
void UpperAll (char *, char *, int);
void TimeStamp (char *, char *);
void WhichError (int);
void PrSwitch (char *, int);
void FindAsnRoot (char *, char *);
void initmulti (multiamp *);
/* -------------------------------- begin ---------------------------------- */
/* Initialize necessary structures */
InitRefImg (&shadref);
root[0] = '\0';
uroot[0] = '\0';
initmulti (&noise);
initmulti (&gain);
numext = 0;
nextend = 0;
/* Since CR-SPLIT images are in separate files, we need to
combine the same chip's exposure from each file. Therefore
we will loop over each extension in the first image, determine
what chip that corresponds to, and get the same chip from the
rest of the images (which could be in any arbitrary
extension in each of the images).
*/
/* First, let's determine how many extensions/chips in each file */
c_imtgetim (tpin, fimage, CHAR_FNAME_LENGTH);
if (LoadHdr (fimage, &phdr) )
return (status = ERROR_RETURN);
if (GetKeyInt (&phdr, "NEXTEND", NO_DEFAULT, 0, &nextend) == 0)
numext = nextend / EXT_PER_GROUP;
else
numext = 1;
shadswitch = 0;
/* Check to see if SHADCORR was set to PERFORM in image header */
if (GetSwitch (&phdr, "SHADCORR", &shadswitch) )
return(status);
/* If shadcorr was set either by the user on the command line
or in the image header, initialize shadcorr processing.
*/
if (par->shadcorr == PERFORM || shadswitch == PERFORM) {
/* Use par->shadcorr as switch for performing shading correction */
par->shadcorr = PERFORM;
shadrefname = calloc(CHAR_FNAME_LENGTH, sizeof(char));
if (GetKeyStr (&phdr, "SHADFILE", NO_DEFAULT, "", shadrefname, CHAR_FNAME_LENGTH) )
return(status);
strcpy (shadref.name, shadrefname);
/* Read in PEDIGREE and DESCRIPTION for SHADFILE */
if (ImgPedigree (&shadref) )
return (status);
/* If a DUMMY shadfile was specified, turn off shadcorr */
if (shadref.goodPedigree == DUMMY)
par->shadcorr = OMIT;
free (shadrefname);
}
freeHdr (&phdr);
/* Initialize efac */
for (n = 0; n < MAX_FILES; n++) efac[n] = 1.0;
/* calculate the scaling factors due to different exposure time */
strcpy (par->expname, "EXPTIME");
if (cr_scaling (par->expname, tpin, efac, &nimgs, &expend, &expstart) ){
WhichError (status);
return (status);
}
/* make sure there is more than one image to process */
if (nimgs < 2) {
trlmessage ("Needs more than one input image.");
return (status = NOTHING_TO_DO);
}
/* calculate the total exposure time */
exptot = 0.;
non_zero = 0;
for (n = 0; n < nimgs; ++n) {
exptot += efac[n];
/* Count how many inputs have non-zero(valid) EXPTIME */
if (efac[n] > 0.) non_zero++;
}
/* for the case of all images have zero exposure time, use equal
exposure time of 1. */
if (exptot == 0.) {
for (n = 0; n < nimgs; ++n) {
efac[n] = 1.;
}
texpt = (float) nimgs;
non_zero = nimgs;
} else {
texpt = exptot;
}
/* Now, start the loop. */
for (extver = 1; extver <= numext; extver++) {
if (par->printtime) {
TimeStamp ("Start cosmic ray rejection","");
}
/* open input files and temporary files, check the parameters */
if (acsrej_check (tpin, extver, numext, par, newpar, imgname, ext,
ipsci, ipdq, &noise, &gain, &dim_x, &dim_y, nimgs)) {
WhichError (status);
return(status);
}
/* Now that we have read in SHADCORR, report if it will be performed */
PrSwitch ("shadcorr", par->shadcorr);
/* read in the parameters */
if (rejpar_in (par, newpar, nimgs, exptot, &niter, sigma) )
return(status);
/* allocate array space */
efacsum = calloc (dim_x*dim_y, sizeof(float));
work = calloc (nimgs*dim_x, sizeof(float));
/* calculate the sky levels */
acsrej_sky (par->sky, ipsci, ipdq, nimgs, par->badinpdq, skyval);
if (status != ACS_OK) {
WhichError (status);
return (status);
}
if (par->verbose) {
for (n = 0; n < nimgs; n++) {
sprintf (MsgText, "sky of '%s[sci,%d]' is %0.3f DN", imgname[n], ext[n], skyval[n]);
trlmessage (MsgText);
}
}
/* use the first input image to set up the data structure */
initSingleGroup (&sg);
/* Find the first image in the input list which has an
EXPTIME > 0. to use for initializing the output SingleGroup.
*/
found = 0;
n = 0;
/* By default, simply use the first one, so initialize accordingly.*/
strcpy (imgdefault, imgname[0]);
do {
if (efac[n] > 0.) {
strcpy(imgdefault,imgname[n]);
found = 1;
}
n++;
} while (found == 0);
getSingleGroup (imgdefault, extver, &sg);
if (non_zero > 1){
/* compute the initial pixel values to be used to compare against all
images. */
if (non_zero < nimgs){
trlwarn ("Some input exposures had EXPTIME = 0.");
}
if (acsrej_init (ipsci, ipdq, par, nimgs, dim_x, dim_y,
noise, gain, efac, skyval, &sg, work) ) {
WhichError(status);
closeSciDq(nimgs, ipsci, ipdq, par);
return (status);
}
if (par->printtime)
TimeStamp ("Calculated initial guess for extension", "");
/* do the iterative cosmic ray rejection calculations */
if (acsrej_loop (ipsci, ipdq, imgname, ext, nimgs, par, niter, dim_x, dim_y,
sigma, noise, gain, efac, skyval,
&sg.sci.data, &sg.err.data, efacsum, &sg.dq.data,
&nrej, shadref.name) ) {
WhichError(status);
closeSciDq(nimgs, ipsci, ipdq, par);
return (status);
}
} else {
trlwarn ("Cosmic-ray rejection NOT performed!");
if (non_zero > 0) {
trlwarn ("Some input exposures had EXPTIME = 0.");
trlwarn ("Output product will not be cosmic-ray cleaned!");
} /*else {
trlwarn ("ALL input exposures had EXPTIME = 0.");
trlwarn ("Output product will be BLANK!");
} */
} /* End if(non_zero) block */
/* must close all images, now that we are done reading them */
closeSciDq(nimgs, ipsci, ipdq, par);
/* calculate the total sky ... */
skysum = 0.;
for (n = 0; n < nimgs; ++n) {
skysum += skyval[n];
}
/* ... and force it to be non-negative */
if (skysum < 0.) skysum = 0.;
if (par->printtime){
if (non_zero > 1){
TimeStamp ("Finished detecting cosmic rays on extension", "");
} else {
TimeStamp ("Done checking this extension","");
}
}
/* write to the output image */
if (non_zero > 0){
for (j = 0; j < dim_y; ++j) {
for (i = 0; i < dim_x; ++i) {
PPix(&sg.sci.data,i,j) = PPix(&sg.sci.data,i,j)*texpt + skysum;
PPix(&sg.err.data,i,j) *= texpt;
}
}
} else {
for (j = 0; j < dim_y; ++j) {
for (i = 0; i < dim_x; ++i) {
PPix(&sg.sci.data,i,j) = par->fillval;
PPix(&sg.err.data,i,j) = 0.;
/* Set DQ value to one which will always be considered BAD */
PPix(&sg.dq.data,i,j) = 1;
}
}
/* Set at least one pixel to a different value to insure
that an image array actually gets produced. */
PPix(&sg.err.data,0,0) = -1.;
PPix(&sg.dq.data,0,0) = 8;
}
/* update the exposure time of the output images */
PutKeyFlt (sg.globalhdr, "TEXPTIME", exptot, "");
PutKeyFlt (sg.globalhdr, "SKYSUM", skysum, "Total sky level (DN)");
PutKeyDbl (sg.globalhdr, "EXPSTART", expstart, "computed exposure start time (Modified Julian Date)");
PutKeyDbl (sg.globalhdr, "EXPEND", expend, "exposure end time (Modified Julian Date)");
/*
Updated REJ_RATE to use 'texpt' as a safe value when
EXPTIME=0 for all members. WJH, 24 Feb 2003
*/
PutKeyFlt (sg.globalhdr, "REJ_RATE", (float)nrej/texpt,
"Cosmic ray impact rate (pixels/sec)");
PutKeyFlt (sg.globalhdr, "EXPTIME", exptot, "");
if (par->shadcorr) {
logit = 0;
if (UpdateSwitch ("SHADCORR", par->shadcorr, sg.globalhdr, &logit) )
return (status);
PrSwitch ("shadcorr", COMPLETE);
if (logit) {
/*Records SHADFILE information in header comments... */
if (ImgHistory (&shadref, sg.globalhdr))
return (status);
}
}
/* record parameters to the output file */
cr_history (&sg, par, nextend);
PutKeyInt (&sg.sci.hdr, "NCOMBINE", nimgs, "");
UFilename (outfile, sg.globalhdr);
UMemType (mtype, sg.globalhdr);
FindAsnRoot (outfile, root);
UpperAll (root, uroot, strlen(root)+1 );
/* EXPNAME values modified for all extensions in a SingleGroup.
WJH 7 July 1999
*/
UExpname (root, &sg.sci.hdr);
UExpname (root, &sg.err.hdr);
UExpname (root, &sg.dq.hdr);
PutKeyStr (sg.globalhdr, "ROOTNAME", uroot,"Rootname of the observation set");
/* Output CHIP to the same EXTVER as the CHIP ID */
putSingleGroup (outfile, extver, &sg, 0);
freeSingleGroup (&sg);
if (par->printtime)
TimeStamp ("Finished writing out extension", "");
/* deallocate memories */
free (efacsum);
free (work);
}
/* Set status to a value which will be understood by
CALACS to turn off subsequent processing. */
if (non_zero == 0) status = NO_GOOD_DATA;
return (status);
}
int WF3cte (char *input, char *output, CCD_Switch *cte_sw,
RefFileInfo *refnames, int printtime, int verbose, int onecpu) {
/*
input: filename
output: filename
cte_sw: the calibration flags
refnames: the names of the calibration reference files
onecpu: use parallel processing?
The following are new primary header keywords which will be added to the data
so that they can be updated by the code. They are also specified in the PCTETAB
reference file.
These are taken from the PCTETAB
CTE_NAME - name of cte algorithm
CTE_VER - version number of cte algorithm
CTEDATE0 - date of wfc3/uvis installation in HST, in MJD
CTEDATE1 - reference date of CTE model pinning, in MJD
PCTETLEN - max length of CTE trail
PCTERNOI - readnoise amplitude for clipping
PCTESMIT - number of iterations used in CTE forward modeling
PCTESHFT - number of iterations used in the parallel transfer
PCTENSMD - readnoise mitigation algorithm
PCTETRSH - over-subtraction threshold
PCTEFRAC - cte scaling frac calculated from expstart
PCTERNOI - the readnoise clipping level to use
#These are taken from getreffiles.c
DRKCFILE is a new dark reference file used only in the CTE branch *_DRC.fits
BIACFILE is a new super-bias reference file used only in the CTE branch *_BIC.fits
PCTETAB is a new reference file FITS table which will contain the software parameter switches for the CTE correction *_CTE.fit
This is the main workhorse function for removing the CTE from WFC3 UVIS images
Unfortunately this happens before anything else in wfc3, so there's a lot of reading files
at the beginning in order to populate needed information. The rest of the pipeline works
on one chip at a time and the structures are all defined to support that. None of these
structures are defined until the code enters the single chip loops. This differs from the
CTE correction in ACS which occurs later in the process after basic structures are defined.
*/
extern int status;
WF3Info wf3; /*structure with calibration switches and reference files for passing*/
Hdr phdr; /*primary header for input image, all output information saved here*/
CTEParams cte_pars; /*STRUCTURE HOLDING THE MODEL PARAMETERS*/
SingleGroup cd; /*SCI 1*/
SingleGroup ab; /*SCI 2*/
SingleGroup raz; /* THE LARGE FORMAT COMBINATION OF CDAB*/
SingleGroup rsz; /* LARGE FORMAT READNOISE CORRECTED IMAGE */
SingleGroup rsc; /* CTE CORRECTED*/
SingleGroup rzc; /* FINAL CTE CORRECTED IMAGE */
SingleGroup chg; /* THE CHANGE DUE TO CTE */
SingleGroup raw; /* THE RAW IMAGE IN RAZ FORMAT */
int i,j; /*loop vars*/
int max_threads=1;
clock_t begin;
double time_spent;
float hardset=0.0;
begin = (double)clock();
Bool subarray; /* to verify that no subarray is being used, it's not implemented yet*/
/*CONTAIN PARALLEL PROCESSING TO A SINGLE THREAD AS USER OPTION*/
# ifdef _OPENMP
trlmessage("Using parallel processing provided by OpenMP inside CTE routine");
if (onecpu){
omp_set_dynamic(0);
max_threads=1;
sprintf(MsgText,"onecpu == TRUE, Using only %i threads/cpu", max_threads);
} else {
omp_set_dynamic(0);
max_threads = omp_get_num_procs(); /*be nice, use 1 less than avail?*/
sprintf(MsgText,"Setting max threads to %i of %i cpus",max_threads, omp_get_num_procs());
}
omp_set_num_threads(max_threads);
trlmessage(MsgText);
# endif
/* COPY COMMAND-LINE ARGUMENTS INTO WF3. */
WF3Init (&wf3);
strcpy (wf3.input, input);
strcpy (wf3.output, output);
PrBegin ("WFC3CTE");
if (wf3.printtime)
TimeStamp("WFC3CTE Started: ",wf3.rootname);
/* CHECK WHETHER THE OUTPUT FILE ALREADY EXISTS. */
if (FileExists (wf3.output)){
WhichError(status);
return (ERROR_RETURN);
}
wf3.pctecorr = cte_sw->pctecorr;
wf3.darkcorr = cte_sw->darkcorr;
wf3.biascorr = cte_sw->biascorr;
wf3.blevcorr = cte_sw->blevcorr;
wf3.printtime = printtime;
wf3.verbose = verbose;
wf3.refnames = refnames;
PrFileName ("input", wf3.input);
PrFileName ("output", wf3.output);
if (wf3.biascorr == COMPLETE){
trlmessage("BIASCORR complete for input image, CTE can't be performed");
return(ERROR_RETURN);
}
if (wf3.darkcorr == COMPLETE){
trlmessage("DARKCORR complete for input image, CTE can't be performed");
return(ERROR_RETURN);
}
if (wf3.blevcorr == COMPLETE){
trlmessage("BLEVCORR complete for input image, CTE can't be performed");
return(ERROR_RETURN);
}
/* DETERMINE THE NAMES OF THE TRAILER FILES BASED ON THE INPUT
AND OUTPUT FILE NAMES, THEN INITIALIZE THE TRAILER FILE BUFFER
WITH THOSE NAMES.
*/
if (initCTETrl (input, output))
return (status);
/* OPEN INPUT IMAGE IN ORDER TO READ ITS PRIMARY HEADER. */
if (LoadHdr (wf3.input, &phdr) ){
WhichError(status);
return (ERROR_RETURN);
}
/* GET KEYWORD VALUES FROM PRIMARY HEADER. */
if (GetKeys (&wf3, &phdr)) {
freeHdr (&phdr);
return (status);
}
if (GetCTEFlags (&wf3, &phdr)) {
freeHdr(&phdr);
return (status);
}
/* OPEN THE INPUT IMAGES AND GET THE SCIENCE EXTENSIONS */
initSingleGroup (&cd);
getSingleGroup (wf3.input, 1, &cd);
if (hstio_err())
return (status = OPEN_FAILED);
/*** MAKE SURE THIS IS NOT A SUBARRAY ***/
if (GetKeyBool (cd.globalhdr, "SUBARRAY", NO_DEFAULT, 0, &subarray))
return (status=KEYWORD_MISSING);
if (subarray) {
sprintf(MsgText,"**SUBARRAY FOUND!; SUBARRAY images are not yet supported for CTE**");
trlmessage(MsgText);
status=ERROR_RETURN;
return(status);
}
initSingleGroup (&ab);
getSingleGroup (wf3.input, 2, &ab);
if (hstio_err())
return (status = OPEN_FAILED);
if (GetKeyBool (ab.globalhdr, "SUBARRAY", NO_DEFAULT, 0, &subarray))
return (status=KEYWORD_MISSING);
if (subarray) {
sprintf(MsgText,"SUBARRAY FOUND; **SUBARRAY images are not yet supported for CTE**");
trlmessage(MsgText);
status=ERROR_RETURN;
return(status);
}
/*READ IN THE CTE PARAMETER TABLE*/
initCTEParams(&cte_pars);
if (GetCTEPars (wf3.pctetab.name,&cte_pars))
return (status);
if (verbose){
PrRefInfo ("pctetab", wf3.pctetab.name, wf3.pctetab.pedigree,
wf3.pctetab.descrip, wf3.pctetab.descrip2);
}
/*SAVE THE PCTETABLE INFORMATION TO THE HEADER OF THE SCIENCE IMAGE
AFTER CHECKING TO SEE IF THE USER HAS SPECIFIED ANY CHANGES TO THE
CTE CODE VARIABLES.
*/
if (CompareCTEParams(&cd, &cte_pars)){
return (status);
}
/*SET UP THE ARRAYS WHICH WILL BE PASSED AROUND*/
initSingleGroup(&raz);
allocSingleGroup(&raz, RAZ_COLS, RAZ_ROWS);
initSingleGroup(&rsz);
allocSingleGroup(&rsz, RAZ_COLS, RAZ_ROWS);
initSingleGroup(&rsc);
allocSingleGroup(&rsc, RAZ_COLS, RAZ_ROWS);
initSingleGroup(&rzc);
allocSingleGroup(&rzc, RAZ_COLS, RAZ_ROWS);
initSingleGroup(&raw);
allocSingleGroup(&raw, RAZ_COLS, RAZ_ROWS);
initSingleGroup(&chg);
allocSingleGroup(&chg, RAZ_COLS, RAZ_ROWS);
for (i=0;i<RAZ_COLS;i++){
for(j=0;j<RAZ_ROWS;j++){
Pix(raw.sci.data,i,j)=hardset;
Pix(rsz.sci.data,i,j)=hardset;
Pix(raz.sci.data,i,j)=hardset;
Pix(rsc.sci.data,i,j)=hardset;
Pix(rzc.sci.data,i,j)=hardset;
Pix(chg.sci.data,i,j)=hardset;
}
}
/* SAVE A COPY OF THE RAW IMAGE FOR LATER */
makesciRAZ(&cd,&ab,&raw);
/***SUBTRACT THE CTE BIAS FROM BOTH CHIPS IN PLACE***/
if (doCteBias(&wf3,&cd)){
freeSingleGroup(&cd);
return(status);
}
if (doCteBias(&wf3,&ab)){
freeSingleGroup(&ab);
return(status);
}
/*CONVERT TO RAZ FORMAT AND CORRECT FOR GAIN*/
if (raw2raz(&wf3, &cd, &ab, &raz))
return (status);
/***CALCULATE THE SMOOTH READNOISE IMAGE***/
trlmessage("CTE: Calculating smooth readnoise image");
/***CREATE THE NOISE MITIGATION MODEL ***/
if (cte_pars.noise_mit == 0) {
if (raz2rsz(&wf3, &raz, &rsz, cte_pars.rn_amp, max_threads))
return (status);
} else {
trlmessage("Only noise model 0 implemented!");
return (status=ERROR_RETURN);
}
/***CONVERT THE READNOISE SMNOOTHED IMAGE TO RSC IMAGE
THIS IS WHERE THE CTE GETS CALCULATED ***/
if (rsz2rsc(&wf3, &rsz, &rsc, &cte_pars))
return (status);
/*** SAVE USEFULL HEADER INFORMATION ***/
if (cteHistory (&wf3, cd.globalhdr))
return (status);
/*** CREATE THE FINAL CTE CORRECTED IMAGE, PUT IT BACK INTO ORIGNAL RAW FORMAT***/
for (i=0;i<RAZ_COLS;i++){
for(j=0; j<RAZ_ROWS; j++){
Pix(chg.sci.data,i,j) = (Pix(rsc.sci.data,i,j) - Pix(rsz.sci.data,i,j))/wf3.ccdgain;
Pix(rzc.sci.data,i,j) = Pix(raw.sci.data,i,j) + Pix(chg.sci.data,i,j);
}
}
/*BACK TO NORMAL FORMATTING*/
undosciRAZ(&cd,&ab,&rzc);
/*UPDATE THE OUTPUT HEADER ONE FINAL TIME*/
PutKeyDbl(cd.globalhdr, "PCTEFRAC", cte_pars.scale_frac,"CTE scaling fraction based on expstart");
trlmessage("PCTEFRAC saved to header");
/*SAVE THE NEW RAW FILE WITH UPDATED SCIENCE ARRAYS AND PRIMARY HEADER TO RAC*/
putSingleGroup(output,cd.group_num, &cd,0);
putSingleGroup(output,ab.group_num, &ab,0);
/** CLEAN UP **/
freeSingleGroup(&rzc);
freeSingleGroup(&rsc);
freeSingleGroup(&chg);
freeSingleGroup(&raz);
freeSingleGroup(&rsz);
freeSingleGroup(&raw);
time_spent = ((double) clock()- begin +0.0) / CLOCKS_PER_SEC;
if (verbose){
sprintf(MsgText,"CTE run time: %.2f(s) with %i procs/threads\n",time_spent,max_threads);
trlmessage(MsgText);
}
PrSwitch("pctecorr", COMPLETE);
if(wf3.printtime)
TimeStamp("PCTECORR Finished",wf3.rootname);
return (status);
}
