VOS_VOID NAS_RabmSmPdpModifyIndMsg( VOS_VOID *pMsg )
{
RABMSM_MODIFY_IND_STRU *pstPdpModifyIndMsg;
RABM_NSAPI_ENUM NsapiIndex;
QCI_TYPE_ENUM_UINT8 enQci;
pstPdpModifyIndMsg = ( RABMSM_MODIFY_IND_STRU * )pMsg;
/*打印流程信息---收到消息:*/
RABM_LOG1_NORMAL( "NAS_RabmSmPdpModifyIndMsg:NORMAL:RECEIVE RABMSM_MODIFY_IND Msg: NSAPI:", (VOS_INT32)(pstPdpModifyIndMsg->ulNsapi) );
if ( ( pstPdpModifyIndMsg->ulNsapi < RABM_MIN_NSAPI_NUMBER )
|| ( pstPdpModifyIndMsg->ulNsapi > RABM_MAX_NSAPI_NUMBER ) )
{
/*打印警告信息---消息中的NSAPI不在范围之内:*/
RABM_LOG1_WARNING( "NAS_RabmSmPdpModifyIndMsg:WARNING:The NSAPI item of the Entry Parameter is BEYOND range!: NSAPI:", (VOS_INT32)(pstPdpModifyIndMsg->ulNsapi) );
return;
}
NsapiIndex = ( RABM_NSAPI_ENUM )( pstPdpModifyIndMsg->ulNsapi - RABM_2G_NSAPI_OFFSET );
if ( ( gastRabm2GEntity[NsapiIndex].State >= RABM_NSAPI_OK_TRANSMODE_NO )
&& ( gastRabm2GEntity[NsapiIndex].State <= RABM_DATA_TRANS_STOP ) )
{
/*更新该NSAPI中的QoS参数:*/
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = pstPdpModifyIndMsg->Qos.ulLength;
PS_MEM_CPY(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
pstPdpModifyIndMsg->Qos.aucQosValue,
NAS_RABM_MAX_QOS_LEN);
/* 给CDS发送消息通知CDS QOS信息 */
enQci = NAS_RABM_GetQciFromQos(gastRabm2GEntity[NsapiIndex].stQos.ulQosLength,
gastRabm2GEntity[NsapiIndex].stQos.aucQosValue);
NAS_RABM_SndCdsQosFcRabCreateInd(NsapiIndex + RABM_NSAPI_OFFSET, enQci);
}
else if ( RABM_2G_NULL == gastRabm2GEntity[NsapiIndex].State )
{
/*打印警告信息---该NSAPI未激活:*/
RABM_LOG1_WARNING( "NAS_RabmSmPdpModifyIndMsg:WARNING:This NSAPI hasn't been activated!: NSAPI:", (VOS_INT32)(pstPdpModifyIndMsg->ulNsapi) );
}
else
{
/*打印错误信息---该NSAPI的状态出错:*/
RABM_LOG1_ERROR( "NAS_RabmSmPdpModifyIndMsg:ERROR:This NSAPI's state is WRONG!: NSAPI:", (VOS_INT32)(pstPdpModifyIndMsg->ulNsapi) );
}
return;
}
VOS_VOID NAS_RabmSnSequenceRspMsg( VOS_VOID *pMsg )
{
VOS_UINT8 ucLoop;
VOS_UINT8 ucFlag = VOS_FALSE;
ST_APP_RABM_STATUS stReportStatus;
if ( ( RABM_ROUTING_AREA_UPDATE_T1_ON != gRabmRAT1Switch )
&& ( RABM_3G_TO_2G_T3_ON != gRabm3GTo2GT3Switch ) ) /*两个定时器都没开*/
{
/*打印警告信息---收到不合逻辑的消息:*/
RABM_LOG_WARNING( "NAS_RabmSnSequenceRspMsg:WARNING:RECEIVE an ILLOGICAL SnSequenceRsp Msg because rout.area.update.T1 and Rabm.sys.3To2.T3 Timer are OFF!" );
return;
}
if ( ( RABM_ROUTING_AREA_UPDATE_T1_ON == gRabmRAT1Switch )
&& ( RABM_3G_TO_2G_T3_ON == gRabm3GTo2GT3Switch ) ) /*两个定时器都开了*/
{
/*打印警告信息---收到不合逻辑的消息:*/
RABM_LOG_WARNING( "NAS_RabmSnSequenceRspMsg:WARNING:RECEIVE an ILLOGICAL SnSequenceRsp Msg because rout.area.update.T1 and Rabm.sys.3To2.T3 Timer are ON!" );
return;
}
/*打印流程信息---收到消息:*/
RABM_LOG_NORMAL( "NAS_RabmSnSequenceRspMsg:NORMAL:RECEIVE RABM_SN_SEQUENCE_RSP_MSG Msg From UEPS_PID_SN" );
if ( RABM_3G_TO_2G_T3_ON == gRabm3GTo2GT3Switch )
{
ucFlag = VOS_TRUE;
}
for ( ucLoop = 0; ucLoop < RABM_2G_MAX_ENT_NUM; ucLoop++ ) /*遍历2G中的每个NSAPI*/
{
switch ( gastRabm2GEntity[ucLoop].State ) /*该NSAPI的状态*/
{
case RABM_2G_NULL:
break;
case RABM_NSAPI_OK_TRANSMODE_NO:
case RABM_DATA_TRANS_READY:
case RABM_DATA_TRANS_STOP: /*这三种状态的处理方式一样*/
if ( VOS_TRUE == ucFlag )
{
if ( RABM_NSAPI_OK_TRANSMODE_NO == gastRabm2GEntity[ucLoop].State )
{
RABM_LOG1_WARNING( "NAS_RabmSnSequenceRspMsg:WARNING:RABM_NSAPI_OK_TRANSMODE_NO state receive SnSequenceRsp Msg is ILLOGICAL: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
else if ( RABM_DATA_TRANS_READY == gastRabm2GEntity[ucLoop].State )
{
RABM_LOG1_WARNING( "NAS_RabmSnSequenceRspMsg:WARNING:RABM_DATA_TRANS_READY state receive SnSequenceRsp Msg is ILLOGICAL: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
else
{
RABM_LOG1_WARNING( "NAS_RabmSnSequenceRspMsg:WARNING:RABM_DATA_TRANS_STOP state receive SnSequenceRsp Msg is ILLOGICAL: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
}
break;
case RABM_ROUT_AREA_UPDATE:
/*将该NSAPI的状态置为RABM_DATA_TRANS_READY:*/
RABM_SetGState((RABM_NSAPI_ENUM)ucLoop, RABM_DATA_TRANS_READY);
/*打印流程信息---状态切换:*/
RABM_LOG1_NORMAL( "STATE RABM_ROUT_AREA_UPDATE state CHANGE TO RABM_DATA_TRANS_READY state: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
if ( RABM_ROUTING_AREA_UPDATE_T1_ON == gRabmRAT1Switch ) /*若打开了rout.area.update.T1定时器*/
{
/*进行2G中的处理:*/
NAS_RabmDeal2GSnSequence(pMsg);
/*向APP上报TAFRABM_STARTSTOP_IND(START)消息:*/
stReportStatus.ucDomain = D_RABM_PS_DOMAIN;
stReportStatus.ucRabId = ucLoop + RABM_NSAPI_OFFSET;
stReportStatus.ucStatus = TAF_RABM_START_DATA;
stReportStatus.ucStartCause = TAF_RABM_START_CAUSE_3G_TO_2G_RA_UPDATE_FINISH;
Api_AppRabmStatusInd( &stReportStatus ); /*通知APP开始数据传输*/
/*打印流程信息---上报了消息:*/
RABM_LOG1_NORMAL( "STATE RABM_ROUT_AREA_UPDATE state report TAFRABM_STARTSTOP_IND(START) Msg to APP: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
else if ( RABM_3G_TO_2G_T3_ON == gRabm3GTo2GT3Switch ) /*若打开了Rabm.sys.3To2.T3定时器*/
{
/*进行切换中的处理*/
NAS_RabmDealChangeSnSequence();
/*向APP上报TAFRABM_STARTSTOP_IND(START)消息:*/
stReportStatus.ucDomain = D_RABM_PS_DOMAIN;
stReportStatus.ucRabId = ucLoop + RABM_NSAPI_OFFSET;
stReportStatus.ucStatus = TAF_RABM_START_DATA;
stReportStatus.ucStartCause = TAF_RABM_START_CAUSE_3G_TO_2G_RA_UPDATE_FINISH;
Api_AppRabmStatusInd( &stReportStatus ); /*通知APP开始数据传输*/
/*打印流程信息---上报了消息:*/
RABM_LOG1_NORMAL( "STATE RABM_ROUT_AREA_UPDATE state report TAFRABM_STARTSTOP_IND(START) Msg to APP: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
else
{
/*向APP上报TAFRABM_STARTSTOP_IND(START)消息:*/
stReportStatus.ucDomain = D_RABM_PS_DOMAIN;
stReportStatus.ucRabId = ucLoop + RABM_NSAPI_OFFSET;
stReportStatus.ucStatus = TAF_RABM_START_DATA;
stReportStatus.ucStartCause = TAF_RABM_START_CAUSE_3G_TO_2G_RA_UPDATE_FINISH;
Api_AppRabmStatusInd( &stReportStatus ); /*通知APP开始数据传输*/
/*打印流程信息---上报了消息:*/
RABM_LOG1_NORMAL( "STATE RABM_ROUT_AREA_UPDATE state report TAFRABM_STARTSTOP_IND(START) Msg to APP: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
break;
default:
/*打印出错信息---该NSAPI的状态字段出错:*/
RABM_LOG1_ERROR( "NAS_RabmSnSequenceRspMsg:ERROR:This NSAPI's state is WRONG!: NSAPI:", ucLoop + RABM_NSAPI_OFFSET );
}
}
}
VOS_VOID NAS_RabmSmPdpActivateIndMsg( VOS_VOID *pMsg )
{
RABMSM_ACTIVATE_IND_STRU *pstPdpActivateIndMsg;
RABM_NSAPI_ENUM NsapiIndex;
QCI_TYPE_ENUM_UINT8 enQci;
pstPdpActivateIndMsg = ( RABMSM_ACTIVATE_IND_STRU * )pMsg;
if ( ( pstPdpActivateIndMsg->ulNsapi < RABM_MIN_NSAPI_NUMBER )
|| ( pstPdpActivateIndMsg->ulNsapi > RABM_MAX_NSAPI_NUMBER ) )
{
/*打印警告信息---入口消息非法:*/
RABM_LOG_WARNING( "NAS_RabmSmPdpActivateIndMsg:WARNING:The NSAPI item of the Entry Parameter is BEYOND range!" );
return;
}
if ( ( RABMSM_ACT_MSG_1 != pstPdpActivateIndMsg->ulActMsgType )
&& ( RABMSM_ACT_MSG_2 != pstPdpActivateIndMsg->ulActMsgType ) )
{
/*打印警告信息---入口消息中消息的标识非法:*/
RABM_LOG1_WARNING( "NAS_RabmSmPdpActivateIndMsg:WARNING:The MsgType item of the Entry Parameter is ERROR!: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
return;
}
NsapiIndex = ( RABM_NSAPI_ENUM )( pstPdpActivateIndMsg->ulNsapi - RABM_2G_NSAPI_OFFSET );
switch ( gastRabm2GEntity[NsapiIndex].State ) /*该NSAPI所对应的状态*/
{
case RABM_2G_NULL:
if ( RABMSM_ACT_MSG_1 == pstPdpActivateIndMsg->ulActMsgType )
{
/*打印流程信息---收到第一条PDP激活消息:*/
RABM_LOG1_NORMAL( "NAS_RabmSmPdpActivateIndMsg:NORMAL:RECEIVE The FIRST PdpActivateInd Msg: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
/*获取ucPppFlg:*/
if( RABM_SM_PPP_PROT == pstPdpActivateIndMsg->ulPppFlag )
{
gastRabm2GEntity[NsapiIndex].ucPppFlg = RABM_SM_PPP_PROT;
}
else
{
gastRabm2GEntity[NsapiIndex].ucPppFlg = RABM_SM_IP_PROT;
}
return;
}
if ((RABMSM_ACT_MSG_2 == pstPdpActivateIndMsg->ulActMsgType)
&& (VOS_TRUE == NAS_RABM_GetDataSuspendFlg()))
{
/*打印流程信息---状态切换:*/
RABM_LOG1_NORMAL( "STATE RABM_2G_NULL state CHANGE TO RABM_DATA_TRANS_STOP state: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
/*将该NSAPI的状态置为RABM_DATA_TRANS_STOP:*/
RABM_SetGState(NsapiIndex, RABM_DATA_TRANS_STOP);
}
else
{
/*启动Rabm.act.req.T1定时器:*/
NAS_RabmStartTimer( ( RABM_TIMER_NAME_ENUM )NsapiIndex, RABM_TIMER_PARA_ACT_REQ_T1 );
/*打印流程信息---启动了Rabm.act.req.T1定时器:*/
RABM_LOG1_NORMAL( "NAS_RabmSmPdpActivateIndMsg:NORMAL:Start Rabm.act.req.T1 Timer SUCCESS: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
/*将该NSAPI的状态置为RABM_NSAPI_OK_TRANSMODE_NO:*/
RABM_SetGState(NsapiIndex, RABM_NSAPI_OK_TRANSMODE_NO);
/*打印流程信息---状态切换:*/
RABM_LOG1_NORMAL( "STATE RABM_2G_NULL state CHANGE TO RABM_NSAPI_OK_TRANSMODE_NO state: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
}
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = pstPdpActivateIndMsg->Qos.ulLength;
PS_MEM_CPY(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
pstPdpActivateIndMsg->Qos.aucQosValue,
NAS_RABM_MAX_QOS_LEN);
/*创建RAB_MAP映射实体*/
NAS_RABM_CreateRabMapEntity((VOS_UINT8)(pstPdpActivateIndMsg->ulNsapi),
(VOS_UINT8)(pstPdpActivateIndMsg->ulLinkdNsapi),
(VOS_UINT8)(pstPdpActivateIndMsg->ulNsapi));
/* 给CDS发送消息通知CDS QOS信息 */
enQci = NAS_RABM_GetQciFromQos(gastRabm2GEntity[NsapiIndex].stQos.ulQosLength,
gastRabm2GEntity[NsapiIndex].stQos.aucQosValue);
NAS_RABM_SndCdsQosFcRabCreateInd(NsapiIndex + RABM_NSAPI_OFFSET, enQci);
break;
case RABM_NSAPI_OK_TRANSMODE_NO:
case RABM_DATA_TRANS_READY:
case RABM_ROUT_AREA_UPDATE:
case RABM_DATA_TRANS_STOP: /*激活此四种非空状态下的NSAPI，则只进行QoS的更新，故处理方式一样*/
if ( RABMSM_ACT_MSG_1 == pstPdpActivateIndMsg->ulActMsgType )
{
/*打印流程信息---收到第一条PDP激活消息:*/
RABM_LOG1_NORMAL( "NAS_RabmSmPdpActivateIndMsg:NORMAL:RECEIVE The FIRST PdpActivateInd Msg: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
return;
}
/*打印流程信息---此时该NSAPI已激活，故更新Qos:*/
RABM_LOG1_NORMAL( "NAS_RabmSmPdpActivateIndMsg:NORMAL:This NSAPI has been Activated,so UPDATE the QoS: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = pstPdpActivateIndMsg->Qos.ulLength;
PS_MEM_CPY(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
pstPdpActivateIndMsg->Qos.aucQosValue,
NAS_RABM_MAX_QOS_LEN);
break;
default:
/*打印出错信息---该NSAPI的状态字段出错:*/
RABM_LOG1_ERROR( "NAS_RabmSmPdpActivateIndMsg:ERROR:This NSAPI's state is WRONG!: NSAPI:", (VOS_INT32)(pstPdpActivateIndMsg->ulNsapi) );
break;
}
return;
}
VOS_VOID NAS_RabmSmPdpDeactivateIndMsg( VOS_VOID *pMsg )
{
VOS_UINT8 ucLoop;
RABM_NSAPI_ENUM NsapiIndex;
RABMSM_DEACTIVATE_IND_STRU *pstPdpDeactiveIndMsg;
pstPdpDeactiveIndMsg = ( RABMSM_DEACTIVATE_IND_STRU * )pMsg;
if ( pstPdpDeactiveIndMsg->ulDeactiveNum > RABM_2G_MAX_ENT_NUM )
{
RABM_LOG_WARNING( "NAS_RabmSmPdpDeactivateIndMsg:WARNING:The DeactiveNum item of the Entry Parameter is BEYOND range!" );
return;
}
for ( ucLoop = 0; ucLoop < pstPdpDeactiveIndMsg->ulDeactiveNum; ucLoop++ )/*遍历消息中指示的需去激活的NSAPI的个数*/
{
if ( ( pstPdpDeactiveIndMsg->aulNsapiList[ucLoop] < RABM_MIN_NSAPI_NUMBER )
|| ( pstPdpDeactiveIndMsg->aulNsapiList[ucLoop] > RABM_MAX_NSAPI_NUMBER ) )
{
/*打印警告信息---消息中的NSAPI不在范围之内:*/
RABM_LOG1_WARNING( "NAS_RabmSmPdpDeactivateIndMsg:WARNING:The NSAPI item of the Entry Parameter is BEYOND range!: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
continue;
}
NsapiIndex = ( RABM_NSAPI_ENUM )( pstPdpDeactiveIndMsg->aulNsapiList[ucLoop] - RABM_2G_NSAPI_OFFSET );
switch ( gastRabm2GEntity[NsapiIndex].State ) /*该NSAPI所对应的状态*/
{
case RABM_2G_NULL:
/*打印流程信息---状态不变:*/
RABM_LOG1_NORMAL( "STATE RABM_2G_NULL state keep the same: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
break;
case RABM_NSAPI_OK_TRANSMODE_NO:
if ( RABM_ACT_REQ_T1_ON == gaRabmActReqT1Switch[NsapiIndex] ) /*若打开了Rabm.act.req.T1定时器*/
{
/*关闭Rabm.act.req.T1定时器:*/
NAS_RabmStopTimer( ( RABM_TIMER_NAME_ENUM )NsapiIndex, RABM_TIMER_PARA_ACT_REQ_T1 );
}
/*将该NSAPI的状态置为RABM_2G_NULL:*/
RABM_SetGState(NsapiIndex, RABM_2G_NULL);
/*打印流程信息---状态切换:*/
RABM_LOG1_NORMAL( "STATE RABM_NSAPI_OK_TRANSMODE_NO state CHANGE TO RABM_2G_NULL state: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
/*清空QoS:*/
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = 0;
PS_MEM_SET(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
0x00,
sizeof(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue));
break;
case RABM_ROUT_AREA_UPDATE:
if ( RABM_NO == NAS_RabmQueryRAUState( NsapiIndex ) )
{
if ( RABM_ROUTING_AREA_UPDATE_T1_ON == gRabmRAT1Switch ) /*若打开了rout.area.update.T1定时器*/
{
/*关闭rout.area.update.T1定时器:*/
NAS_RabmStopTimer( RABM_TIMER_NAME_COMMON, RABM_TIMER_PARA_ROUT_AREA_UPDATE_T1 );
}
else
{
if ( RABM_3G_TO_2G_T3_ON == gRabm3GTo2GT3Switch ) /*若打开了Rabm.sys.3To2.T3定时器*/
{
/*关闭Rabm.sys.3To2.T3定时器:*/
NAS_RabmStopTimer( RABM_TIMER_NAME_COMMON, RABM_TIMER_PARA_3_TO_2_T3 );
}
}
}
/*打印流程信息---状态切换:*/
RABM_LOG1_NORMAL( "STATE RABM_ROUT_AREA_UPDATE state CHANGE TO RABM_2G_NULL state: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
/*将该NSAPI的状态置为RABM_2G_NULL:*/
RABM_SetGState(NsapiIndex, RABM_2G_NULL);
/*清空QoS:*/
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = 0;
PS_MEM_SET(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
0x00,
sizeof(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue));
break;
case RABM_DATA_TRANS_READY:
/*no break here*/
case RABM_DATA_TRANS_STOP:
/*打印流程信息---状态切换:*/
if ( RABM_DATA_TRANS_READY == gastRabm2GEntity[NsapiIndex].State )
{
RABM_LOG1_NORMAL( "STATE RABM_DATA_TRANS_READY state CHANGE TO RABM_2G_NULL state: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
}
else
{
RABM_LOG1_NORMAL( "STATE RABM_DATA_TRANS_STOP state CHANGE TO RABM_2G_NULL state: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
}
/*将该NSAPI的状态置为RABM_2G_NULL:*/
RABM_SetGState(NsapiIndex, RABM_2G_NULL);
/*清空QoS:*/
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = 0;
PS_MEM_SET(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
0x00,
sizeof(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue));
break;
default:
/*打印出错信息---该NSAPI所对应的状态字段出错:*/
RABM_LOG1_ERROR( "NAS_RabmSmPdpDeactivateIndMsg:ERROR:This NSAPI's state is WRONG!: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
/*将该NSAPI的状态置为RABM_2G_NULL:*/
RABM_SetGState(NsapiIndex, RABM_2G_NULL);
/*打印警告信息---将该状态出错的NSAPI的状态置为RABM_2G_NULL:*/
RABM_LOG1_WARNING( "NAS_RabmSmPdpDeactivateIndMsg:WARNING:Set this NSAPI's state to RABM_2G_NULL!: NSAPI:", (VOS_INT32)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]) );
/*清空QoS:*/
gastRabm2GEntity[NsapiIndex].stQos.ulQosLength = 0;
PS_MEM_SET(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue,
0x00,
sizeof(gastRabm2GEntity[NsapiIndex].stQos.aucQosValue));
break;
}
/*删除RAB_MAP实体*/
RABM_DelRabMap((VOS_UINT8)(pstPdpDeactiveIndMsg->aulNsapiList[ucLoop]));
}
return;
}