void intel_pch_finalize_smm(void)
{
if (CONFIG_LOCK_SPI_ON_RESUME_RO || CONFIG_LOCK_SPI_ON_RESUME_NO_ACCESS) {
/* Copy flash regions from FREG0-4 to PR0-4
and enable write protection bit31 */
int i;
u32 lockmask = (1 << 31);
if (CONFIG_LOCK_SPI_ON_RESUME_NO_ACCESS)
lockmask |= (1 << 15);
for (i = 0; i < 20; i += 4)
RCBA32(0x3874 + i) = RCBA32(0x3854 + i) | lockmask;
}
/* Set SPI opcode menu */
RCBA16(0x3894) = SPI_OPPREFIX;
RCBA16(0x3896) = SPI_OPTYPE;
RCBA32(0x3898) = SPI_OPMENU_LOWER;
RCBA32(0x389c) = SPI_OPMENU_UPPER;
/* Lock SPIBAR */
RCBA32_OR(0x3804, (1 << 15));
#if CONFIG_SPI_FLASH_SMM
/* Re-init SPI driver to handle locked BAR */
spi_init();
#endif
/* TCLOCKDN: TC Lockdown */
RCBA32_OR(0x0050, (1 << 31));
/* BIOS Interface Lockdown */
RCBA32_OR(0x3410, (1 << 0));
/* Function Disable SUS Well Lockdown */
RCBA_AND_OR(8, 0x3420, ~0U, (1 << 7));
/* Global SMI Lock */
pci_or_config16(PCH_LPC_DEV, 0xa0, 1 << 4);
/* GEN_PMCON Lock */
pci_or_config8(PCH_LPC_DEV, 0xa6, (1 << 1) | (1 << 2));
/* R/WO registers */
RCBA32(0x21a4) = RCBA32(0x21a4);
pci_write_config32(PCI_DEV(0, 27, 0), 0x74,
pci_read_config32(PCI_DEV(0, 27, 0), 0x74));
/* Indicate finalize step with post code */
outb(POST_OS_BOOT, 0x80);
}
void intel_pch_finalize_smm(void)
{
/* Set SPI opcode menu */
RCBA16(0x3894) = SPI_OPPREFIX;
RCBA16(0x3896) = SPI_OPTYPE;
RCBA32(0x3898) = SPI_OPMENU_LOWER;
RCBA32(0x389c) = SPI_OPMENU_UPPER;
/* Lock SPIBAR */
RCBA32_OR(0x3804, (1 << 15));
#if CONFIG_SPI_FLASH_SMM
/* Re-init SPI driver to handle locked BAR */
spi_init();
#endif
/* TCLOCKDN: TC Lockdown */
RCBA32_OR(0x0050, (1 << 31));
/* BIOS Interface Lockdown */
RCBA32_OR(0x3410, (1 << 0));
/* Function Disable SUS Well Lockdown */
RCBA_AND_OR(8, 0x3420, ~0U, (1 << 7));
/* Global SMI Lock */
pcie_or_config16(PCH_LPC_DEV, 0xa0, 1 << 4);
/* GEN_PMCON Lock */
pcie_or_config8(PCH_LPC_DEV, 0xa6, (1 << 1) | (1 << 2));
/* R/WO registers */
RCBA32(0x21a4) = RCBA32(0x21a4);
pcie_write_config32(PCI_DEV(0, 27, 0), 0x74,
pcie_read_config32(PCI_DEV(0, 27, 0), 0x74));
/* Indicate finalize step with post code */
outb(POST_OS_BOOT, 0x80);
}
