static void BSPConfigGPIOforPowerOff(void)
{
#if OEM_IMPLEMENT
volatile S3C6410_GPIO_REG *pGPIOReg;
#endif
OALMSG(OAL_FUNC, (TEXT("++BSPConfigGPIOforPowerOff()\n")));
OALMSG(1, (TEXT("++BSPConfigGPIOforPowerOff()\n")));
// The OEM can implement this function to cut GPIO when system falls into sleep mode.
#if OEM_IMPLEMENT
pGPIOReg = (S3C6410_GPIO_REG*)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_OP1 IO
// GPF[7:0], GPG[7:0], GPE[15:14], GPE[4:0]
//GPF
pIOPort->GPFCON &=~(0xffff<<0);
pIOPort->GPFCON |= ((0x1<<14)|(0x1<<12)|(0x1<<10)|(0x1<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x2<<0));
pIOPort->EXTINT0 = (READEXTINT0(pIOPort->EXTINT0) & ~((1<<31) | (1<<27) | (1<<23) | (1<<19) | (1<<15) | (1<<11) | (1<<7) | (1<<3) ));
pIOPort->EXTINT0 = (READEXTINT0(pIOPort->EXTINT0) | ((1<<31) | (1<<27) | (1<<23) | (1<<19) | (0<<15) | (1<<11) | (1<<7) | (1<<3) )); //rEXTINT0[11] = PD_dis(Because of VBUS_DET)
pIOPort->GPFDAT &=~ (0xff<<0);
pIOPort->GPFDAT |= ((0x0<<7)|(0x0<<6)|(0x0<<5)|(0x0<<4)|(0x0<<3)|(0x0<<2)|(0x0<<1)|(0x0<<0));
//GPG
pIOPort->GPGCON &=~(0xffff<<0);
pIOPort->GPGCON |= ((0x0<<14)|(0x0<<12)|(0x0<<10)|(0x0<<8)|(0x2<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPGUDP &=~(0xffff<<0);
pIOPort->EXTINT1 = (READEXTINT1(pIOPort->EXTINT1) | (0<<31) | (0<<27) | (0<<23) | (0<<19) | (1<<15) | (0<<11) | (0<<7)| (0<<0) );
pIOPort->GPGDAT &=~ (0xff<<0);
pIOPort->GPGDAT |= ((0x1<<7)|(0x0<<6)|(0x1<<5)|(0x1<<4)|(0x0<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
//GPA
pIOPort->GPACDH = (READGPACDH(pIOPort->GPACDL,pIOPort->GPACDH) | (1<<16) | (1<<5)); //GPACDH[16] is exclusive use of nRSTOUT and '1' is PRESET
// DP0 / DN0
pIOPort->MISCCR |= (1<<12); //Set USB port as suspend mode
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_OP2 IO
// GPB[10:0], GPH[12:0], GPE[15:14], GPE[4:0]
//GPB
pIOPort->GPBCON &=~(0x3fffff<<0);
pIOPort->GPBCON |= ((0x0<<20)|(0x0<<18)|(0x0<<16)|(0x0<<14)|(0x0<<12)|(0x0<<10)|(0x0<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x3<<0));
pIOPort->GPBUDP = (pIOPort->GPBUDP &=~(0x3fffff<<0));
pIOPort->GPBUDP |= ((0x3<<20)|(0x2<<18)|(0x2<<16)|(0x2<<14)|(0x2<<12)|(0x2<<10)|(0x3<<8)|(0x3<<6)|(0x3<<4)|(0x0<<2)|(0x3<<0));
//GPE
pIOPort->GPECON &=~((0xf<<28)|(0x3ff<<0));
pIOPort->GPECON |= ((0x0<<30)|(0x0<<28)|(0x0<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPEUDP &=~((0xf<<28)|(0x3ff<<0));
pIOPort->GPEUDP |= ((0x0<<30)|(0x0<<28)|(0x0<<8)|(0x3<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPEDAT &=~ (0xffff<<0);
pIOPort->GPEDAT |= ((0x1<<15)|(0x1<<14)|(0x1<<4)|(0x1<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
//printf("rgPEcon=%08x, rgPEUDP=%08x, rGPeDAT=%08x\n", rGPECON,rGPEUDP,rGPEDAT);
//GPG
pIOPort->GPGCON &=~(0xffff<<16);
pIOPort->GPGCON |= ((0x0<<30)|(0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16));
pIOPort->GPGUDP &=~(0xffff<<16);
pIOPort->GPGUDP |= ((0x2<<30)|(0x0<<28)|(0x3<<26)|(0x3<<24)|(0x0<<22)|(0x3<<20)|(0x3<<18)|(0x3<<16));
pIOPort->GPGDAT &=~ (0xff<<8);
pIOPort->GPGDAT |= ((0x0<<15)|(0x0<<14)|(0x0<<13)|(0x0<<12)|(0x0<<11)|(0x0<<10)|(0x0<<9)|(0x0<<8));
//GPH
pIOPort->GPHCON &=~(0x3fffffff<<0);
pIOPort->GPHCON |= ((0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPHUDP &=~(0x3fffffff<<0);
pIOPort->GPHUDP |= ((0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x3<<20)|(0x0<<18)|(0x3<<16)|(0x3<<6)|(0x0<<4)|(0x3<<2)|(0x0<<0));
pIOPort->GPHDAT &=~ (0x7fff<<0);
pIOPort->GPHDAT |= ((0x0<<14)|(0x1<<13)|(0x0<<12)|(0x1<<11)|(0x0<<10)|(0x1<<9)|(0x1<<8)|(0x0<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_SD IO
// GPE[13:5], GPL[14:0], GPJ[15:13]
//GPE
pIOPort->GPECON &=~(0x3ffff<<10);
pIOPort->GPECON |= ((0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16)|(0x0<<14)|(0x0<<12)|(0x0<<10));//Set Input All
pIOPort->GPEUDP &=~(0x3ffff<<10);
pIOPort->GPEUDP |= ((0x0<<26)|(0x0<<24)|(0x0<<22)|(0x3<<20)|(0x3<<18)|(0x3<<16)|(0x3<<14)|(0x3<<12)|(0x0<<10));
pIOPort->GPEDAT &=~ (0x1ff<<5);
pIOPort->GPEDAT |= ((0x0<<13)|(0x0<<12)|(0x0<<11)|(0x0<<10)|(0x1<<9)|(0x1<<8)|(0x0<<7)|(0x1<<6)|(0x1<<5));
//GPL
pIOPort->GPLCON &=~(0x3fffffff<<0);
pIOPort->GPLCON |= ((0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16)|(0x0<<14)|(0x0<<12)|(0x0<<10)|(0x0<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPLUDP &=~(0x3fffffff<<0);
pIOPort->GPLUDP |= ((0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x3<<16)|(0x3<<14)|(0x3<<12)|(0x3<<10)|(0x3<<8)|(0x3<<6)|(0x3<<4)|(0x3<<2)|(0x3<<0));
pIOPort->GPLDAT &=~ (0x1fff<<0);
pIOPort->GPLDAT |= ((0x0<<14)|(0x0<<13)|(0x0<<12)|(0x0<<11)|(0x0<<10)|(0x1<<9)|(0x1<<8)|(0x1<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
//GPJ
pIOPort->GPJCON &=~(0x3f<<26);
pIOPort->GPJCON |= ((0x0<<30)|(0x0<<28)|(0x0<<26));
pIOPort->GPJUDP &=~(0x3f<<26);
pIOPort->GPJUDP |= ((0x0<<30)|(0x0<<28)|(0x0<<26));
pIOPort->GPJDAT &=~ (0x7<<13);
pIOPort->GPJDAT |= ((0x1<<15)|(0x1<<14)|(0x1<<13));
//GPH - This configuration is setting for CFG3(UART) set as [off:off:off:off]
pIOPort->GPHCON &= ~((0x3<<14)|(0x3<<12)|(0x3<<10)|(0x3<<8));
pIOPort->GPHUDP &= ~((0x3<<14)|(0x3<<12)|(0x3<<10)|(0x3<<8));
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_LCD IO
// GPC[15:0], GPD[15:0]
//GPC
pIOPort->GPCCON &=~(0xffffffff<<0);
pIOPort->GPCCON |= ((0x0<<30)|(0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16)\
|(0x0<<14)|(0x0<<12)|(0x0<<10)|(0x0<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPCUDP &=~(0xffffffff<<0);
pIOPort->GPCUDP |= ((0x2<<30)|(0x2<<28)|(0x2<<26)|(0x2<<24)|(0x2<<22)|(0x2<<20)|(0x2<<18)|(0x2<<16)
|(0x2<<14)|(0x2<<12)|(0x2<<10)|(0x2<<8)|(0x2<<6)|(0x2<<4)|(0x2<<2)|(0x2<<0));
pIOPort->GPCDAT &=~ (0x1fff<<0);
pIOPort->GPCDAT |= ((0x0<<14)|(0x1<<13)|(0x0<<12)|(0x1<<11)|(0x0<<10)|(0x1<<9)|(0x1<<8)|(0x0<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
//GPD
pIOPort->GPDCON &=~(0xffffffff<<0);
pIOPort->GPDCON |= ((0x0<<30)|(0x0<<28)|(0x0<<26)|(0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16)\
|(0x0<<14)|(0x0<<12)|(0x0<<10)|(0x0<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPDUDP &=~(0xffffffff<<0);
pIOPort->GPDUDP |= ((0x2<<30)|(0x2<<28)|(0x2<<26)|(0x2<<24)|(0x2<<22)|(0x2<<20)|(0x2<<18)|(0x2<<16)\
|(0x2<<14)|(0x2<<12)|(0x2<<10)|(0x2<<8)|(0x2<<6)|(0x2<<4)|(0x2<<2)|(0x2<<0));
pIOPort->GPDDAT &=~ (0xffff<<0);
pIOPort->GPDDAT |= ((0x0<<14)|(0x1<<13)|(0x0<<12)|(0x1<<11)|(0x0<<10)|(0x1<<9)|(0x1<<8)|(0x0<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_CAM IO
// GPJ[15:0],
//GPJ
pIOPort->GPJCON &=~(0x3ffffff<<0);
pIOPort->GPJCON |= ((0x0<<24)|(0x0<<22)|(0x0<<20)|(0x0<<18)|(0x0<<16)\
|(0x0<<14)|(0x0<<12)|(0x0<<10)|(0x0<<8)|(0x0<<6)|(0x0<<4)|(0x0<<2)|(0x0<<0));
pIOPort->GPJUDP &=~(0x3ffffff<<0);
pIOPort->GPJUDP |= ((0x2<<24)|(0x2<<22)|(0x2<<20)|(0x2<<18)|(0x2<<16)\
|(0x2<<14)|(0x2<<12)|(0x2<<10)|(0x2<<8)|(0x2<<6)|(0x2<<4)|(0x2<<2)|(0x2<<0));
pIOPort->GPJDAT &=~ (0x1fff<<0);
pIOPort->GPJDAT |= ((0x0<<12)|(0x1<<11)|(0x0<<10)|(0x1<<9)|(0x1<<8)\
|(0x0<<7)|(0x1<<6)|(0x1<<5)|(0x1<<4)|(0x0<<3)|(0x1<<2)|(0x1<<1)|(0x1<<0));
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_RMOP
pIOPort->MSLCON = 0x0;
pIOPort->GPMCON &=~((0x3<<2) | (0x3<<0));
pIOPort->GPMUDP &=~((0x3<<4) |(0x3<<2) | (0x3<<0));
pIOPort->GPMUDP |= ((0x3<<4) | (0x3<<2) | (0x3<<0));
///////////////////////////////////////////////////////////////////////////////////////////
// VDD_SMOP : sleep wakeup iteration fail or not?
pIOPort->MSLCON = 0x0;
pIOPort->DATAPDEN &=~((0x1<<0)|(0x1<<1)|(0x1<<2)|(0x1<<3)|(0x1<<4)|(0x1<<5)); // reset value = 0x3f; --> 0x30 = 2uA
pIOPort->DATAPDEN = (0x3<<4);
#endif
OALMSG(OAL_FUNC, (TEXT("--BSPConfigGPIOforPowerOff()\n")));
OALMSG(1, (TEXT("--BSPConfigGPIOforPowerOff()\n")));
}
void OEMPowerOff()
{
#if (BSP_TYPE == BSP_SMDK2443)
static UINT32 saveArea[85];
#elif (BSP_TYPE == BSP_SMDK2450)
static UINT32 saveArea[90];
#endif
volatile S3C2450_INTR_REG *pIntr = (S3C2450_INTR_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_INTR, FALSE);
volatile S3C2450_IOPORT_REG *pIOPort = (S3C2450_IOPORT_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_IOPORT, FALSE);
volatile S3C2450_LCD_REG *pLCD = (S3C2450_LCD_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_LCD, FALSE);
volatile S3C2450_CLKPWR_REG *pCLKPWR = (S3C2450_CLKPWR_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_CLOCK_POWER, FALSE);
// First do platform specific actions
//BSPPowerOff();
RETAILMSG(1,(TEXT("\r\n --OEMPowerOff--\r\n")));
g_pLCDReg = (volatile S3C2450_LCD_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_LCD, FALSE);
// g_pMEMCTRLReg = (volatile S3C2450_MEMCTRL_REG *)OALPAtoVA(S3C2450_BASE_REG_PA_MEMCTRL, FALSE);
g_pPWMRegs = (volatile S3C2450_PWM_REG *)OALPAtoVA(S3C2450_BASE_REG_PA_PWM, FALSE);
g_pCLKPWRRegs = (volatile S3C2450_CLKPWR_REG *)OALPAtoVA(S3C2450_BASE_REG_PA_CLOCK_POWER, FALSE);
g_pNandRegs = (volatile S3C2450_NAND_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_NAND, FALSE);
g_pRTCRegs = (volatile S3C2450_RTC_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_RTC, FALSE);
g_pIOPort = (volatile S3C2450_IOPORT_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_IOPORT, FALSE);
g_pIntrRegs = (volatile S3C2450_INTR_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_INTR, FALSE);
g_pBspArgs = (volatile BSP_ARGS *)OALPAtoVA(IMAGE_SHARE_ARGS_PA_START, FALSE);
g_pADCReg = (S3C2450_ADC_REG*)OALPAtoVA(S3C2450_BASE_REG_PA_ADC, FALSE);
#ifdef DVS_EN
RETAILMSG(1,(TEXT("DVS OFF\r\n")));
{
int voltage_set[2] = HIGH_V_SET;
ChangeVoltage(ARM_INT_VDD, voltage_set);
}
HCLK_RECOVERYUP();
DVS_OFF();
g_oalIoCtlClockSpeed = S3C2450_FCLK;
CurrentState = Active;
#endif //DVS_EN
// Then save system registers
#if (BSP_TYPE == BSP_SMDK2443)
#ifdef EVT1
pIOPort->GPACDL = 0xFFFF;
pIOPort->GPACDH = 0x1FFFF;
#else
saveArea[0] = INPORT32(&pIOPort->GPACON);
saveArea[1] = INPORT32(&pIOPort->GPADAT);
#endif
#elif (BSP_TYPE == BSP_SMDK2450)
#if 0
//[david.modify] 2008-06-04 18:26
// s805g ÓÐÓõ½GPA
//=========================
pIOPort->GPACON = 0xFFFFFFFF;
pIOPort->GPADAT= 0x1FFFF;
//ÔÚ´Ë´¦¹Ø±ÕGPA13
//GPA14
pIOPort->GPACON&=~( (1<<13)|(1<<14));
pIOPort->GPADAT&=~( (1<<13)|(1<<14));
//=========================
#endif
#endif
saveArea[2] = INPORT32(&pIOPort->GPBCON);
saveArea[3] = INPORT32(&pIOPort->GPBDAT);
saveArea[4] = INPORT32(&pIOPort->GPBUDP);
saveArea[5] = INPORT32(&pIOPort->GPCCON);
saveArea[6] = INPORT32(&pIOPort->GPCDAT);
saveArea[7] = INPORT32(&pIOPort->GPCUDP);
saveArea[8] = INPORT32(&pIOPort->GPDCON);
saveArea[9] = INPORT32(&pIOPort->GPDDAT);
saveArea[10] = INPORT32(&pIOPort->GPDUDP);
saveArea[11] = INPORT32(&pIOPort->GPECON);
saveArea[12] = INPORT32(&pIOPort->GPEDAT);
saveArea[13] = INPORT32(&pIOPort->GPEUDP);
saveArea[14] = INPORT32(&pIOPort->GPFCON);
saveArea[15] = INPORT32(&pIOPort->GPFDAT);
saveArea[16] = INPORT32(&pIOPort->GPFUDP);
saveArea[17] = INPORT32(&pIOPort->GPGCON);
saveArea[18] = INPORT32(&pIOPort->GPGDAT);
saveArea[19] = INPORT32(&pIOPort->GPGUDP);
saveArea[20] = INPORT32(&pIOPort->GPHCON);
saveArea[21] = INPORT32(&pIOPort->GPHDAT);
saveArea[22] = INPORT32(&pIOPort->GPHUDP);
saveArea[23] = INPORT32(&pIOPort->GPJCON);
saveArea[24] = INPORT32(&pIOPort->GPJDAT);
saveArea[25] = INPORT32(&pIOPort->GPJUDP);
#if (BSP_TYPE == BSP_SMDK2443)
#ifdef EVT1
saveArea[26] = INPORT32(&pIOPort->GPKCON);
saveArea[27] = INPORT32(&pIOPort->GPKDAT);
saveArea[28] = INPORT32(&pIOPort->DATAPDEN);
#else
saveArea[26] = INPORT32(&pIOPort->GPKCON);
saveArea[27] = INPORT32(&pIOPort->GPKDAT);
saveArea[28] = INPORT32(&pIOPort->GPKUDP);
#endif
#elif (BSP_TYPE == BSP_SMDK2450)
saveArea[26] = INPORT32(&pIOPort->GPKCON);
saveArea[27] = INPORT32(&pIOPort->GPKDAT);
saveArea[28] = INPORT32(&pIOPort->GPKUDP);
#endif
saveArea[29] = INPORT32(&pIOPort->GPLCON);
saveArea[30] = INPORT32(&pIOPort->GPLDAT);
saveArea[31] = INPORT32(&pIOPort->GPLUDP);
saveArea[32] = INPORT32(&pIOPort->GPMCON);
saveArea[33] = INPORT32(&pIOPort->GPMDAT);
saveArea[34] = INPORT32(&pIOPort->GPMUDP);
saveArea[35] = INPORT32(&pIOPort->MISCCR);
saveArea[36] = INPORT32(&pIOPort->DCLKCON);
#if (BSP_TYPE == BSP_SMDK2443)
#ifdef EVT1
saveArea[37] = READEXTINT0(pIOPort->EXTINT0);
saveArea[38] = READEXTINT1(pIOPort->EXTINT1);
saveArea[39] = READEXTINT2(pIOPort->EXTINT2);
#else
saveArea[37] = INPORT32(&pIOPort->EXTINT0);
saveArea[38] = INPORT32(&pIOPort->EXTINT1);
saveArea[39] = INPORT32(&pIOPort->EXTINT2);
#endif
#elif (BSP_TYPE == BSP_SMDK2450)
saveArea[37] = INPORT32(&pIOPort->EXTINT0);
saveArea[38] = INPORT32(&pIOPort->EXTINT1);
saveArea[39] = INPORT32(&pIOPort->EXTINT2);
#endif
saveArea[40] = INPORT32(&pIOPort->EINTFLT0);
saveArea[41] = INPORT32(&pIOPort->EINTFLT1);
saveArea[42] = INPORT32(&pIOPort->EINTFLT2);
saveArea[43] = INPORT32(&pIOPort->EINTFLT3);
saveArea[44] = INPORT32(&pIOPort->EINTMASK);
#if (BSP_TYPE == BSP_SMDK2443)
saveArea[45] = INPORT32(&pIntr->INTMOD);
saveArea[46] = INPORT32(&pIntr->INTMSK);
#elif (BSP_TYPE == BSP_SMDK2450)
saveArea[45] = INPORT32(&pIntr->INTMOD1);
saveArea[46] = INPORT32(&pIntr->INTMSK1);
#endif
saveArea[47] = INPORT32(&pIntr->INTSUBMSK);
saveArea[48] = INPORT32(&pLCD->VIDCON0);
saveArea[49] = INPORT32(&pLCD->VIDCON1);
saveArea[50] = INPORT32(&pLCD->VIDTCON0);
saveArea[51] = INPORT32(&pLCD->VIDTCON1);
saveArea[52] = INPORT32(&pLCD->VIDTCON2);
saveArea[53] = INPORT32(&pLCD->WINCON0);
saveArea[54] = INPORT32(&pLCD->WINCON1);
saveArea[55] = INPORT32(&pLCD->VIDOSD0A);
saveArea[56] = INPORT32(&pLCD->VIDOSD0B);
saveArea[57] = INPORT32(&pLCD->VIDOSD0C);
saveArea[58] = INPORT32(&pLCD->VIDOSD1A);
saveArea[59] = INPORT32(&pLCD->VIDOSD1B);
saveArea[60] = INPORT32(&pLCD->VIDOSD1C);
saveArea[61] = INPORT32(&pLCD->VIDW00ADD0B0);
saveArea[62] = INPORT32(&pLCD->VIDW00ADD0B1);
saveArea[63] = INPORT32(&pLCD->VIDW01ADD0);
saveArea[64] = INPORT32(&pLCD->VIDW00ADD1B0);
saveArea[65] = INPORT32(&pLCD->VIDW00ADD1B1);
saveArea[66] = INPORT32(&pLCD->VIDW01ADD1);
saveArea[67] = INPORT32(&pLCD->VIDW00ADD2B0);
saveArea[68] = INPORT32(&pLCD->VIDW00ADD2B1);
saveArea[69] = INPORT32(&pLCD->VIDW01ADD2);
saveArea[70] = INPORT32(&pLCD->VIDINTCON);
saveArea[71] = INPORT32(&pLCD->W1KEYCON0);
saveArea[72] = INPORT32(&pLCD->W1KEYCON1);
saveArea[73] = INPORT32(&pLCD->W2KEYCON0);
saveArea[74] = INPORT32(&pLCD->W2KEYCON1);
saveArea[75] = INPORT32(&pLCD->W3KEYCON0);
saveArea[76] = INPORT32(&pLCD->W3KEYCON1);
saveArea[77] = INPORT32(&pLCD->W4KEYCON0);
saveArea[78] = INPORT32(&pLCD->W4KEYCON1);
saveArea[79] = INPORT32(&pLCD->WIN0MAP);
saveArea[80] = INPORT32(&pLCD->WIN1MAP);
saveArea[81] = INPORT32(&pLCD->WPALCON);
saveArea[82] = INPORT32(&pLCD->SYSIFCON0);
saveArea[83] = INPORT32(&pLCD->SYSIFCON1);
saveArea[84] = INPORT32(&pLCD->DITHMODE);
#if (BSP_TYPE == BSP_SMDK2443)
#elif (BSP_TYPE == BSP_SMDK2450)
saveArea[85] = INPORT32(&pIntr->INTMOD2);
saveArea[86] = INPORT32(&pIntr->INTMSK2);
#endif
pLCD->VIDCON0 = 0;
pLCD->VIDCON1 = 0;
pLCD->VIDTCON0 = 0;
pLCD->VIDTCON1 = 0;
pLCD->VIDTCON2 = 0;
pLCD->WINCON0 = 0;
pLCD->WINCON1 = 0;
pLCD->VIDOSD0A = 0;
pLCD->VIDOSD0B = 0;
pLCD->VIDOSD0C = 0;
pLCD->VIDW00ADD0B0 = 0;
pLCD->VIDW00ADD1B0 = 0;
pLCD->VIDW00ADD2B0 = 0;
// ConfigStopGPIO();
#define NEW_BSP_MODIFY 1
#if NEW_BSP_MODIFY
//EVT3 For IROM Boot, GPC is retention in sleep mode
pIOPort->GPCCON &= ~(0x3f<<10);
pIOPort->GPCUDP &= ~(0x3f<<10);
#endif
// Switch off power for KITL device
//OALKitlPowerOff(); // woo 1021
//[david.modify] 2008-07-04 11:19
//====================================
DPNOK(g_pBspArgs->u32WakeupHoldTime);
ConfigSleepGPIO_david();
//[david.modify] 2008-07-23 18:49
// ½«´ËÐÐÄõô£¬²âÊÔ´ËÐÐÊÇ·ñÓ°Ï쵽˯ÃߺóTOUCH²»ºÃʹµÄÎÊÌâ
ConfigMiscReg_david();
// clear interrupt pending register
g_pIOPort->EINTPEND = g_pIOPort->EINTPEND;
g_pIntrRegs->SUBSRCPND = g_pIntrRegs->SUBSRCPND;
g_pIntrRegs->SRCPND1 = g_pIntrRegs->SRCPND1;
g_pIntrRegs->INTPND1 = g_pIntrRegs->INTPND1;
//====================================
//[david.modify] 2008-07-08 15:07
// ¸Ä³ÉÖ§³Ö³¤°´»½ÐѺͶ̰´»½ÐÑ
if(WAKEUP_MODE1_SHORTPRESS==g_pBspArgs->u32WakeUpMode){
// Go to power off mode
OALCPUPowerOff();
}
else/* if(WAKEUP_MODE2_LONGPRESS==g_pBspArgs->u32WakeUpMode)*/
{
do {
g_stGPIOInfo[4].u32Stat = 1;
SetGPIOInfo(&g_stGPIOInfo[4], g_pIOPort);
//[david.modify] 2008-08-04 12:33
// ÓÃÓÚ¼ì²â˯ÂÇÇ°CHARGERÊDz»ÊÇÒѾ²åÈëµÄ
//=================================
if (IsChargerIn())
{
//[david.modify] 2008-08-19 00:31
g_bAcAdapterInBeforeSleep = TRUE;
//[david.modify] 2008-08-19 00:31
// g_bAcAdapterInBeforeSleep = FALSE;
}
else
{
g_bAcAdapterInBeforeSleep = FALSE;
}
//======================================
// Go to power off mode
OALCPUPowerOff();
}while(!OALBspWakeupCheck());
}
// Switch on power for KITL device
// OALKitlPowerOn();
/* Recover Process, Load CPU Regs */
#if (BSP_TYPE == BSP_SMDK2443)
#ifdef EVT1
#else
OUTPORT32(&pIOPort->GPACON, saveArea[0]);
OUTPORT32(&pIOPort->GPADAT, saveArea[1]);
#endif
#elif (BSP_TYPE == BSP_SMDK2450)
#endif
//OUTPORT32(&pIOPort->GPACON, saveArea[0]);
//OUTPORT32(&pIOPort->GPADAT, saveArea[1]);
OUTPORT32(&pIOPort->GPBCON, saveArea[2]);
OUTPORT32(&pIOPort->GPBDAT, saveArea[3]);
OUTPORT32(&pIOPort->GPBUDP, saveArea[4]);
OUTPORT32(&pIOPort->GPCCON, saveArea[5]);
OUTPORT32(&pIOPort->GPCDAT, saveArea[6]);
OUTPORT32(&pIOPort->GPCUDP, saveArea[7]);
OUTPORT32(&pIOPort->GPDCON, saveArea[8]);
OUTPORT32(&pIOPort->GPDDAT, saveArea[9]);
OUTPORT32(&pIOPort->GPDUDP, saveArea[10]);
OUTPORT32(&pIOPort->GPECON, saveArea[11]);
OUTPORT32(&pIOPort->GPEDAT, saveArea[12]);
OUTPORT32(&pIOPort->GPEUDP, saveArea[13]);
OUTPORT32(&pIOPort->GPFCON, saveArea[14]);
OUTPORT32(&pIOPort->GPFDAT, saveArea[15]);
OUTPORT32(&pIOPort->GPFUDP, saveArea[16]);
OUTPORT32(&pIOPort->GPGCON, saveArea[17]);
OUTPORT32(&pIOPort->GPGDAT, saveArea[18]);
OUTPORT32(&pIOPort->GPGUDP, saveArea[19]);
OUTPORT32(&pIOPort->GPHCON, saveArea[20]);
OUTPORT32(&pIOPort->GPHDAT, saveArea[21]);
OUTPORT32(&pIOPort->GPHUDP, saveArea[22]);
OUTPORT32(&pIOPort->GPJCON, saveArea[23]);
OUTPORT32(&pIOPort->GPJDAT, saveArea[24]);
OUTPORT32(&pIOPort->GPJUDP, saveArea[25]);
#if (BSP_TYPE == BSP_SMDK2443)
#ifdef EVT1
OUTPORT32(&pIOPort->GPKCON, saveArea[26]);
OUTPORT32(&pIOPort->GPKDAT, saveArea[27]);
OUTPORT32(&pIOPort->DATAPDEN, saveArea[28]);
#else
OUTPORT32(&pIOPort->GPKCON, saveArea[26]);
OUTPORT32(&pIOPort->GPKDAT, saveArea[27]);
OUTPORT32(&pIOPort->GPKUDP, saveArea[28]);
#endif
#elif (BSP_TYPE == BSP_SMDK2450)
OUTPORT32(&pIOPort->GPKCON, saveArea[26]);
OUTPORT32(&pIOPort->GPKDAT, saveArea[27]);
OUTPORT32(&pIOPort->GPKUDP, saveArea[28]);
#endif
OUTPORT32(&pIOPort->GPLCON, saveArea[29]);
OUTPORT32(&pIOPort->GPLDAT, saveArea[30]);
OUTPORT32(&pIOPort->GPLUDP, saveArea[31]);
OUTPORT32(&pIOPort->GPMCON, saveArea[32]);
OUTPORT32(&pIOPort->GPMDAT, saveArea[33]);
OUTPORT32(&pIOPort->GPMUDP, saveArea[34]);
OUTPORT32(&pIOPort->MISCCR, saveArea[35]);
OUTPORT32(&pIOPort->DCLKCON, saveArea[36]);
OUTPORT32(&pIOPort->EXTINT0, saveArea[37]);
OUTPORT32(&pIOPort->EXTINT1, saveArea[38]);
OUTPORT32(&pIOPort->EXTINT2, saveArea[39]);
OUTPORT32(&pIOPort->EINTFLT0, saveArea[40]);
OUTPORT32(&pIOPort->EINTFLT1, saveArea[41]);
OUTPORT32(&pIOPort->EINTFLT2, saveArea[42]);
OUTPORT32(&pIOPort->EINTFLT3, saveArea[43]);
OUTPORT32(&pIOPort->EINTMASK, saveArea[44]);
#if NEW_BSP_MODIFY
// retention release
pCLKPWR->RSTCON |= (1<<16);
#endif
#if (BSP_TYPE == BSP_SMDK2443)
OUTPORT32(&pIntr->INTMOD, saveArea[45]);
OUTPORT32(&pIntr->INTMSK, saveArea[46]);
#elif (BSP_TYPE == BSP_SMDK2450)
OUTPORT32(&pIntr->INTMOD1, saveArea[45]);
OUTPORT32(&pIntr->INTMSK1, saveArea[46]);
#endif
OUTPORT32(&pIntr->INTSUBMSK, saveArea[47]);
// InitDisplay2();
pLCD->VIDCON0 = saveArea[48];
pLCD->VIDCON1 = saveArea[49];
pLCD->VIDTCON0 = saveArea[50];
pLCD->VIDTCON1 = saveArea[51];
pLCD->VIDTCON2 = saveArea[52];
pLCD->WINCON0 = saveArea[53];
pLCD->WINCON1 = saveArea[54];
pLCD->VIDOSD0A = saveArea[55];
pLCD->VIDOSD0B = saveArea[56];
pLCD->VIDOSD0C = saveArea[57];
pLCD->VIDOSD1A = saveArea[58];
pLCD->VIDOSD1B = saveArea[59];
pLCD->VIDOSD1C = saveArea[60];
pLCD->VIDW00ADD0B0 = saveArea[61];
pLCD->VIDW00ADD0B1 = saveArea[62];
pLCD->VIDW01ADD0 = saveArea[63];
pLCD->VIDW00ADD1B0 = saveArea[64];
pLCD->VIDW00ADD1B1 = saveArea[65];
pLCD->VIDW01ADD1 = saveArea[66];
pLCD->VIDW00ADD2B0 = saveArea[67];
pLCD->VIDW00ADD2B1 = saveArea[68];
pLCD->VIDW01ADD2 = saveArea[69];
pLCD->VIDINTCON = saveArea[70];
pLCD->W1KEYCON0 = saveArea[71];
pLCD->W1KEYCON1 = saveArea[72];
pLCD->W2KEYCON0 = saveArea[73];
pLCD->W2KEYCON1 = saveArea[74];
pLCD->W3KEYCON0 = saveArea[75];
pLCD->W3KEYCON1 = saveArea[76];
pLCD->W4KEYCON0 = saveArea[77];
pLCD->W4KEYCON1 = saveArea[78];
pLCD->WIN0MAP = saveArea[79];
pLCD->WIN1MAP = saveArea[80];
pLCD->WPALCON = saveArea[81];
pLCD->SYSIFCON0 = saveArea[82];
pLCD->SYSIFCON1 = saveArea[83];
pLCD->DITHMODE = saveArea[84];
//[david.modify] 2008-06-19 15:21
//===========================
#if 0
delayLoop(100*LCD_DELAY_1MS);
#endif
//===========================
#if (BSP_TYPE == BSP_SMDK2443)
#elif (BSP_TYPE == BSP_SMDK2450)
OUTPORT32(&pIntr->INTMOD2, saveArea[85]);
OUTPORT32(&pIntr->INTMSK2, saveArea[86]);
#endif
pCLKPWR->RSTCON |= pCLKPWR->RSTCON; // This is for control GPIO pads.
#if (BSP_TYPE == BSP_SMDK2443)
/* Interrupt Clear */
//OUTPORT32(&pIOPort->EINTPEND, INPORT32(&pIOPort->EINTPEND));
//OUTPORT32(&pIntr->SUBSRCPND, INPORT32(&pIntr->SUBSRCPND));
#elif (BSP_TYPE == BSP_SMDK2450)
/* Interrupt Clear */
OUTPORT32(&pIOPort->EINTPEND, INPORT32(&pIOPort->EINTPEND));
OUTPORT32(&pIntr->SUBSRCPND, INPORT32(&pIntr->SUBSRCPND));
/* Interrupt Clear */
//OUTPORT32(&pIntr->SRCPND, INPORT32(&pIntr->SRCPND));
//OUTPORT32(&pIntr->INTPND, INPORT32(&pIntr->INTPND));
#endif
// pLCD->LCDSRCPND = pLCD->LCDSRCPND;
// pLCD->LCDINTPND = pLCD->LCDINTPND;
// Do platform dependent power on actions
BSPPowerOn();
}
