VOID ComposePsPoll(RTMP_ADAPTER *pAd)
{
TXINFO_STRUC *pTxInfo;
TXWI_STRUC *pTxWI;
UINT8 TXWISize = pAd->chipCap.TXWISize;
UCHAR *buf;
USHORT data_len;
DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n"));
NdisZeroMemory(&pAd->PsPollFrame, sizeof (PSPOLL_FRAME));
pAd->PsPollFrame.FC.PwrMgmt = 0;
pAd->PsPollFrame.FC.Type = BTYPE_CNTL;
pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL;
pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000;
COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid);
COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
buf = &pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0];
pTxInfo = (TXINFO_STRUC *)buf;
pTxWI = (TXWI_STRUC *)&buf[TXINFO_SIZE];
RTMPZeroMemory(buf, 100);
data_len = sizeof (PSPOLL_FRAME);
rlt_usb_write_txinfo(pAd, pTxInfo, data_len + TXWISize + TSO_SIZE, TRUE,
EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0,
BSSID_WCID, data_len, 0, 0,
(UCHAR) pAd->CommonCfg.MlmeTransmit.field.MCS,
IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
RTMPMoveMemory((VOID *)&buf[TXWISize + TXINFO_SIZE + TSO_SIZE], (VOID *)&pAd->PsPollFrame, data_len);
/* Append 4 extra zero bytes. */
pAd->PsPollContext.BulkOutSize = TXINFO_SIZE + TXWISize + TSO_SIZE + data_len + 4;
}
/* IRQL = DISPATCH_LEVEL */
VOID ComposeNullFrame(RTMP_ADAPTER *pAd)
{
TXINFO_STRUC *pTxInfo;
TXWI_STRUC *pTxWI;
UCHAR *buf;
UINT8 TXWISize = pAd->chipCap.TXWISize;
USHORT data_len = sizeof(pAd->NullFrame);;
NdisZeroMemory(&pAd->NullFrame, data_len);
pAd->NullFrame.FC.Type = BTYPE_DATA;
pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC;
pAd->NullFrame.FC.ToDs = 1;
COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid);
COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
buf = &pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
RTMPZeroMemory(buf, 100);
pTxInfo = (TXINFO_STRUC *)buf;
pTxWI = (TXWI_STRUC *)&buf[TXINFO_SIZE];
rlt_usb_write_txinfo(pAd, pTxInfo,
(USHORT)(data_len + TXWISize + TSO_SIZE), TRUE,
EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0,
BSSID_WCID, data_len, 0, 0,
(UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS,
IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
RTMPMoveMemory((VOID *)&buf[TXWISize + TXINFO_SIZE], (VOID *)&pAd->NullFrame, data_len);
pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWISize + TSO_SIZE + data_len + 4;
}
VOID RtmpUSBNullFrameKickOut(
IN RTMP_ADAPTER *pAd,
IN UCHAR QueIdx,
IN UCHAR *pNullFrame,
IN UINT32 frameLen)
{
if (pAd->NullContext.InUse == FALSE)
{
PTX_CONTEXT pNullContext;
TXINFO_STRUC *pTxInfo;
TXWI_STRUC *pTxWI;
UCHAR *pWirelessPkt;
UINT8 TXWISize = pAd->chipCap.TXWISize;
pNullContext = &(pAd->NullContext);
/* Set the in use bit*/
pNullContext->InUse = TRUE;
pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];
RTMPZeroMemory(&pWirelessPkt[0], 100);
pTxInfo = (TXINFO_STRUC *)&pWirelessPkt[0];
rlt_usb_write_txinfo(pAd, pTxInfo, (USHORT)(frameLen + TXWISize + TSO_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->TxInfoQSEL = FIFO_EDCA;
pTxWI = (TXWI_STRUC *)&pWirelessPkt[TXINFO_SIZE];
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, frameLen,
0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
RTMPMoveMemory(&pWirelessPkt[TXWISize + TXINFO_SIZE + TSO_SIZE], pNullFrame, frameLen);
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWISize + TSO_SIZE], DIR_WRITE, FALSE);
#endif /* RT_BIG_ENDIAN */
pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWISize + TSO_SIZE + frameLen + 4;
pAd->NullContext.BulkOutSize = ( pAd->NullContext.BulkOutSize + 3) & (~3);
/* Fill out frame length information for global Bulk out arbitor*/
/*pNullContext->BulkOutSize = TransferBufferLength;*/
DBGPRINT(RT_DEBUG_TRACE, ("%s - Send NULL Frame @%d Mbps...\n", __FUNCTION__, RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
pAd->Sequence = (pAd->Sequence+1) & MAXSEQ;
/* Kick bulk out */
RTUSBKickBulkOut(pAd);
}
}
void RtmpUSBNullFrameKickOut(struct rt_rtmp_adapter *pAd,
u8 QueIdx,
u8 * pNullFrame, u32 frameLen)
{
if (pAd->NullContext.InUse == FALSE) {
struct rt_tx_context *pNullContext;
struct rt_txinfo *pTxInfo;
struct rt_txwi * pTxWI;
u8 *pWirelessPkt;
pNullContext = &(pAd->NullContext);
/* Set the in use bit */
pNullContext->InUse = TRUE;
pWirelessPkt =
(u8 *)& pNullContext->TransferBuffer->field.
WirelessPacket[0];
RTMPZeroMemory(&pWirelessPkt[0], 100);
pTxInfo = (struct rt_txinfo *)& pWirelessPkt[0];
RTMPWriteTxInfo(pAd, pTxInfo,
(u16)(sizeof(struct rt_header_802_11) + TXWI_SIZE),
TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->QSEL = FIFO_EDCA;
pTxWI = (struct rt_txwi *) & pWirelessPkt[TXINFO_SIZE];
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE,
FALSE, 0, BSSID_WCID, (sizeof(struct rt_header_802_11)), 0,
0, (u8)pAd->CommonCfg.MlmeTransmit.field.MCS,
IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE + TXINFO_SIZE],
&pAd->NullFrame, sizeof(struct rt_header_802_11));
pAd->NullContext.BulkOutSize =
TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
/* Fill out frame length information for global Bulk out arbitor */
/*pNullContext->BulkOutSize = TransferBufferLength; */
DBGPRINT(RT_DEBUG_TRACE,
("SYNC - send NULL Frame @%d Mbps...\n",
RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
/* Kick bulk out */
RTUSBKickBulkOut(pAd);
}
}
VOID RtmpUSBNullFrameKickOut(
IN RTMP_ADAPTER *pAd,
IN UCHAR QueIdx,
IN UCHAR *pNullFrame,
IN UINT32 frameLen)
{
if (pAd->NullContext.InUse == FALSE)
{
PTX_CONTEXT pNullContext;
PTXINFO_STRUC pTxInfo;
PTXWI_STRUC pTxWI;
PUCHAR pWirelessPkt;
pNullContext = &(pAd->NullContext);
// Set the in use bit
pNullContext->InUse = TRUE;
pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];
RTMPZeroMemory(&pWirelessPkt[0], 100);
pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[0];
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->QSEL = FIFO_EDCA;
pTxWI = (PTXWI_STRUC)&pWirelessPkt[TXINFO_SIZE];
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
#endif // RT_BIG_ENDIAN //
RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWI_SIZE], DIR_WRITE, FALSE);
#endif // RT_BIG_ENDIAN //
pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
// Fill out frame length information for global Bulk out arbitor
//pNullContext->BulkOutSize = TransferBufferLength;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - send NULL Frame @%d Mbps...\n", RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
// Kick bulk out
RTUSBKickBulkOut(pAd);
}
}
VOID RtmpUSBNullFrameKickOut(
IN RTMP_ADAPTER *pAd,
IN UCHAR QueIdx,
IN UCHAR *pNullFrame,
IN UINT32 frameLen)
{
if (pAd->NullContext.InUse == FALSE)
{
PTX_CONTEXT pNullContext;
PTXINFO_STRUC pTxInfo;
PTXWI_STRUC pTxWI;
PUCHAR pWirelessPkt;
pNullContext = &(pAd->NullContext);
pNullContext->InUse = TRUE;
pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];
RTMPZeroMemory(&pWirelessPkt[0], 100);
pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[0];
RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->QSEL = FIFO_EDCA;
pTxWI = (PTXWI_STRUC)&pWirelessPkt[TXINFO_SIZE];
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - send NULL Frame @%d Mbps...\n", RateIdToMbps[pAd->CommonCfg.TxRate]));
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);
RTUSBKickBulkOut(pAd);
}
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame;
UCHAR *ptr;
ULONG FrameLen;
ULONG UpdatePos;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
struct wifi_dev *wdev;
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
pComCfg = &pAd->CommonCfg;
pMbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &pMbss->wdev;
pBeaconFrame = (UCHAR *)&pMbss->BeaconBuf[0];
FrameLen = UpdatePos = pMbss->TimIELocationInBeacon;
PhyMode = wdev->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
/* move RSN IE from below to here for Ralink Win7 v3.0.0.61 version parse beacon issue. */
/* sync the order with BRCM's AP. */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) ||
(wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((wdev->AuthMode == Ndis802_11AuthModeWAICERT) ||
(wdev->AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
#ifdef CONFIG_HOTSPOT_R2
extern UCHAR OSEN_IE[];
extern UCHAR OSEN_IELEN;
if ((pMbss->HotSpotCtrl.HotSpotEnable == 0) && (pMbss->HotSpotCtrl.bASANEnable == 1) && (pMbss->wdev.AuthMode == Ndis802_11AuthModeWPA2))
{
RSNIe = IE_WPA;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &OSEN_IELEN,
OSEN_IELEN, OSEN_IE,
END_OF_ARGS);
FrameLen += TmpLen;
}
else
#endif /* CONFIG_HOTSPOT_R2 */
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef HOSTAPD_SUPPORT
if (pMbss->HostapdWPS && (pMbss->WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
#ifdef WSC_AP_SUPPORT
/* add Simple Config Information Element */
if (((pMbss->WscControl.WscConfMode >= 1) && (pMbss->WscIEBeacon.ValueLen)))
bHasWpsIE = TRUE;
#endif /* WSC_AP_SUPPORT */
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pMbss->WscIEBeacon.ValueLen, pMbss->WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#ifdef WSC_AP_SUPPORT
if ((pMbss->WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pMbss->wdev.IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pMbss->wdev.WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http:msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif /* WSC_AP_SUPPORT */
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if (((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
#ifdef CUSTOMER_DCC_FEATURE
|| (pComCfg->channelSwitch.CHSWMode == CHANNEL_SWITCHING_MODE)
#endif
)
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
#ifdef CUSTOMER_DCC_FEATURE
if(pComCfg->channelSwitch.CHSWMode == CHANNEL_SWITCHING_MODE)
*(ptr + 4) = (pComCfg->channelSwitch.CHSWPeriod - pComCfg->channelSwitch.CHSWCount);
else
#endif
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
INT tp_len, wb_len = 0;
UCHAR *ch_sw_wrapper;
VHT_TXPWR_ENV_IE txpwr_env;
*ptr = IE_CH_SWITCH_WRAPPER;
ch_sw_wrapper = (UCHAR *)(ptr + 1); // reserve for length
ptr += 2; // skip len
if (pComCfg->RegTransmitSetting.field.BW == BW_40) {
WIDE_BW_CH_SWITCH_ELEMENT wb_info;
*ptr = IE_WIDE_BW_CH_SWITCH;
//*(ptr + 1) = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
*(ptr + 1) = 3;
ptr += 2;
NdisZeroMemory(&wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
if (pComCfg->vht_bw == VHT_BW_2040)
wb_info.new_ch_width = 0;
else
wb_info.new_ch_width = 1;
if (pComCfg->vht_bw == VHT_BW_80) {
wb_info.center_freq_1 = vht_cent_ch_freq(pAd, pComCfg->Channel);
wb_info.center_freq_2 = 0;
}
NdisMoveMemory(ptr, &wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
//wb_len = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
wb_len = 3;
ptr += wb_len;
wb_len += 2;
}
*ptr = IE_VHT_TXPWR_ENV;
NdisZeroMemory(&txpwr_env, sizeof(VHT_TXPWR_ENV_IE));
tp_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
*(ptr + 1) = tp_len;
ptr += 2;
NdisMoveMemory(ptr, &txpwr_env, tp_len);
ptr += tp_len;
tp_len += 2;
*ch_sw_wrapper = wb_len + tp_len;
FrameLen += (2 + wb_len + tp_len);
}
#endif /* DOT11_VHT_AC */
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef CONFIG_HOTSPOT
if (pMbss->HotSpotCtrl.HotSpotEnable)
{
ULONG TmpLen;
/* Indication element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.HSIndicationIELen,
pMbss->HotSpotCtrl.HSIndicationIE, END_OF_ARGS);
FrameLen += TmpLen;
/* Interworking element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.InterWorkingIELen,
pMbss->HotSpotCtrl.InterWorkingIE, END_OF_ARGS);
FrameLen += TmpLen;
/* Advertisement Protocol element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.AdvertisementProtoIELen,
pMbss->HotSpotCtrl.AdvertisementProtoIE, END_OF_ARGS);
FrameLen += TmpLen;
/* Roaming Consortium element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.RoamingConsortiumIELen,
pMbss->HotSpotCtrl.RoamingConsortiumIE, END_OF_ARGS);
FrameLen += TmpLen;
/* P2P element */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
pMbss->HotSpotCtrl.P2PIELen,
pMbss->HotSpotCtrl.P2PIE, END_OF_ARGS);
FrameLen += TmpLen;
}
#endif
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->wdev.DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
#ifdef CONFIG_DOT11V_WNM
if (pMbss->WNMCtrl.ProxyARPEnable)
extCapInfo.proxy_arp = 1;
#ifdef CONFIG_HOTSPOT_R2
if (pMbss->WNMCtrl.WNMNotifyEnable)
extCapInfo.wnm_notification = 1;
if (pMbss->HotSpotCtrl.QosMapEnable)
extCapInfo.qosmap= 1;
#endif /* CONFIG_HOTSPOT_R2 */
#endif /* CONFIG_DOT11V_WNM */
#ifdef CONFIG_HOTSPOT
if (pMbss->HotSpotCtrl.HotSpotEnable)
extCapInfo.interworking = 1;
#endif /* CONFIG_HOTSPOT */
#ifdef DOT11V_WNM_SUPPORT
if (IS_BSS_TRANSIT_MANMT_SUPPORT(pAd, apidx))
{
extCapInfo.BssTransitionManmt = 1;
}
if (IS_WNMDMS_SUPPORT(pAd, apidx))
{
extCapInfo.DMSSupport = 1;
}
#endif /* DOT11V_WNM_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14))
extCapInfo.operating_mode_notification = 1;
#endif /* DOT11_VHT_AC */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef WFA_VHT_PF
if (pAd->force_vht_op_mode == TRUE)
{
ULONG TmpLen;
UCHAR operating_ie = IE_OPERATING_MODE_NOTIFY, operating_len = 1;
OPERATING_MODE operating_mode;
operating_mode.rx_nss_type = 0;
operating_mode.rx_nss = (pAd->vht_pf_op_ss - 1);
operating_mode.ch_width = pAd->vht_pf_op_bw;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &operating_ie,
1, &operating_len,
1, &operating_mode,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* WFA_VHT_PF */
/* add WMM IE here */
if (pMbss->wdev.bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
{
#ifdef CONFIG_HOTSPOT_R2
if (pMbss->HotSpotCtrl.QLoadTestEnable == 1)
FrameLen += QBSS_LoadElementAppend_HSTEST(pAd, pBeaconFrame+FrameLen, apidx);
else if (pMbss->HotSpotCtrl.QLoadTestEnable == 0)
#endif
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
#ifdef DOT11K_RRM_SUPPORT
|| IS_RRM_ENABLE(pAd, apidx)
#endif /* DOT11K_RRM_SUPPORT */
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
PRRM_QUIET_CB pQuietCB = &pMbss->RrmCfg.QuietCB;
RRM_InsertQuietIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
pQuietCB->QuietCnt ,pQuietCB->QuietPeriod,
pQuietCB->QuietDuration, pQuietCB->QuietOffset);
#ifndef APPLE_11K_IOT
/* Insert BSS AC Access Delay IE. */
RRM_InsertBssACDelayIE(pAd, pBeaconFrame+FrameLen, &FrameLen);
/* Insert BSS Available Access Capacity IE. */
RRM_InsertBssAvailableACIE(pAd, pBeaconFrame+FrameLen, &FrameLen);
#endif /* !APPLE_11K_IOT */
}
#endif /* DOT11K_RRM_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (pComCfg->b256QAM_2G && WMODE_2G_ONLY(pComCfg->PhyMode))
RalinkSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add Mediatek-specific IE here */
{
ULONG TmpLen = 0;
UCHAR MediatekSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0xe7, 0x00, 0x00, 0x00, 0x00};
#ifdef DOT11_VHT_AC
if (pComCfg->b256QAM_2G && WMODE_2G_ONLY(pComCfg->PhyMode))
MediatekSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, MediatekSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, RESERVED_WCID,
FrameLen, PID_MGMT, 0 /*QID_MGMT*/, 0, IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
#ifdef CUSTOMER_DCC_FEATURE
{
HTTRANSMIT_SETTING HTSetting;
UINT32 Index;
MULTISSID_STRUCT *pMbss = NULL;
NdisZeroMemory(&HTSetting, sizeof(HTTRANSMIT_SETTING));
HTSetting.field.MODE = BeaconTransmit.field.MODE;
HTSetting.field.BW = BeaconTransmit.field.BW;
HTSetting.field.ShortGI = BeaconTransmit.field.ShortGI;
HTSetting.field.MCS = BeaconTransmit.field.MCS;
if ((pAd->ApCfg.MBSSID[apidx].wdev.if_dev != NULL) &&
(RTMP_OS_NETDEV_STATE_RUNNING(pAd->ApCfg.MBSSID[apidx].wdev.if_dev)))
{
pMbss = &pAd->ApCfg.MBSSID[apidx];
GetMultShiftFactorIndex(HTSetting, &Index);
RTMPCalculateAPTxRxActivityTime(pAd, Index, FrameLen, pMbss, NULL);
}
}
#endif
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;//, TimLen = 4,
//BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen;
// UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue;
HTTRANSMIT_SETTING BeaconTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
UCHAR PhyMode, SupRateLen;
#ifdef SPECIFIC_BCN_BUF_SUPPORT
unsigned long irqFlag = 0;
#endif // SPECIFIC_BCN_BUF_SUPPORT //
BOOLEAN bHasWpsIE = FALSE;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->ApCfg.MBSSID[apidx].Bssid);
// for update framelen to TxWI later.
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
#ifdef DOT11_N_SUPPORT
// AP Channel Report
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
// 802.11n D2.0 Annex J
// USA
// regulatory class 32, channel set 1~7
// regulatory class 33, channel set 5-11
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; //sizeof(rclass32);
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
// add Simple Config Information Element
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif // WSC_AP_SUPPORT //
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
//
// step 6. move BEACON TXD and frame content to on-chip memory
//
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (higher 8KB shared memory)
*/
if (pAd->BcnCB.bHighShareMemSupport == 1)
RTMP_MAC_SHR_MSEL_LOCK(pAd, HIGHER_SHRMEM, irqFlag);
#endif // SPECIFIC_BCN_BUF_SUPPORT //
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + i, longValue);
ptr += 4;
}
// update BEACON frame content. start right after the 16-byte TXWI field.
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE + i, longValue);
ptr += 4;
}
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (lower 16KB shared memory)
*/
if (pAd->BcnCB.bHighShareMemSupport == 1)
RTMP_MAC_SHR_MSEL_UNLOCK(pAd, LOWER_SHRMEM, irqFlag);
#endif // SPECIFIC_BCN_BUF_SUPPORT //
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
ULONG FrameLen = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
ULONG UpdatePos = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
pMbss = &pAd->ApCfg.MBSSID[apidx];
pComCfg = &pAd->CommonCfg;
PhyMode = pMbss->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
#ifdef HOSTAPD_SUPPORT
if ( pAd->ApCfg.MBSSID[apidx].HostapdWPS && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
#ifdef WSC_AP_SUPPORT
/* add Simple Config Information Element */
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
#endif /* WSC_AP_SUPPORT */
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#ifdef WSC_AP_SUPPORT
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http:msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif /* WSC_AP_SUPPORT */
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
#if defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT)
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT) */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((pMbss->AuthMode == Ndis802_11AuthModeWPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((pMbss->AuthMode == Ndis802_11AuthModeWAICERT) ||
(pMbss->AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (pMbss->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add WMM IE here */
if (pMbss->bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2;*/ /* no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, 0xff,
FrameLen, PID_MGMT, QID_MGMT, 0, IFS_HTTXOP, FALSE, &BeaconTransmit);
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;/*, TimLen = 4, */
/*BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen; */
/* UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2; */
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
#ifdef SPECIFIC_BCN_BUF_SUPPORT
unsigned long irqFlag = 0;
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
#ifdef P2P_SUPPORT
pAd->ApCfg.MBSSID[apidx].Bssid,
#endif /* P2P_SUPPORT */
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
#ifdef P2P_SUPPORT
if (P2P_GO_ON(pAd))
{
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR SupRateLen = 0;
SupRate[0] = 0x8C; /* 6 mbps, in units of 0.5 Mbps, basic rate */
SupRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
SupRate[2] = 0x98; /* 12 mbps, in units of 0.5 Mbps, basic rate */
SupRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
SupRate[4] = 0xb0; /* 24 mbps, in units of 0.5 Mbps, basic rate */
SupRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
SupRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
SupRateLen = 8;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, &SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
}
else
#endif /* P2P_SUPPORT */
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
/* UCHAR TmpFrame[256]; */
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/* 802.11n D2.0 Annex J */
/* USA */
/* regulatory class 32, channel set 1~7 */
/* regulatory class 33, channel set 5-11 */
UCHAR rclass32[]= {32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]= {33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/* */
/* step 6. move BEACON TXD and frame content to on-chip memory */
/* */
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (higher 8KB shared memory)
*/
RTMP_MAC_SHR_MSEL_LOCK(pAd, HIGHER_SHRMEM, irqFlag);
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
for (i=0; i<TXWI_SIZE; i+=4) /* 16-byte TXWI field */
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + i, longValue);
ptr += 4;
}
/* update BEACON frame content. start right after the 16-byte TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE + i, longValue);
ptr += 4;
}
#ifdef SPECIFIC_BCN_BUF_SUPPORT
/*
Shared memory access selection (lower 16KB shared memory)
*/
RTMP_MAC_SHR_MSEL_UNLOCK(pAd, LOWER_SHRMEM, irqFlag);
#endif /* SPECIFIC_BCN_BUF_SUPPORT */
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket)
{
PACKET_INFO PacketInfo;
PUCHAR pSrcBufVA;
UINT SrcBufLen;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
//UCHAR TxBufIdx;
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
//ULONG i;
//HTTRANSMIT_SETTING MlmeTransmit; //Rate for this MGMT frame.
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL)
{
// The buffer shouldn't be NULL
return NDIS_STATUS_FAILURE;
}
// Make sure MGMT ring resource won't be used by other threads
//NdisAcquireSpinLock(&pAd->TxRingLock);
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0)
{
//NdisReleaseSpinLock(&pAd->TxRingLock);
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#endif
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
{
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
//NdisReleaseSpinLock(&pAd->TxRingLock);
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// outgoing frame always wakeup PHY to prevent frame lost
// if (pAd->StaCfg.Psm == PWR_SAVE)
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
#endif // CONFIG_STA_SUPPORT //
pFirstTxWI =(PTXWI_STRUC)pSrcBufVA;
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
if (pHeader_802_11->Addr1[0] & 0x01)
{
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
}
else
{
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
{
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
// Verify Mlme rate for a / g bands.
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
MlmeRate = RATE_6;
//
// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
// Snice it's been set to 0 while on MgtMacHeaderInit
// By the way this will cause frame to be send on PWR_SAVE failed.
//
//
// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
#ifdef CONFIG_STA_SUPPORT
// Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
if (pHeader_802_11->FC.Type != BTYPE_DATA)
{
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ) || !(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
{
pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
}
else
{
pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
}
}
#endif // CONFIG_STA_SUPPORT //
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
{
bAckRequired = FALSE;
}
else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
{
if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
}
else
{
bAckRequired = TRUE;
pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
{
bInsertTimestamp = TRUE;
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
// Before radar detection done, mgmt frame can not be sent but probe req
// Because we need to use probe req to trigger driver to send probe req in passive scan
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
{
DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
//NdisReleaseSpinLock(&pAd->TxRingLock);
return (NDIS_STATUS_FAILURE);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif
//
// fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
// should always has only one ohysical buffer, and the whole frame size equals
// to the first scatter buffer size
//
// Initialize TX Descriptor
// For inter-frame gap, the number is for this frame and next frame
// For MLME rate, we will fix as 2Mb to match other vendor's implement
// pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
// Only beacon use Nseq=TRUE. So here we use Nseq=FALSE.
if (pMacEntry == NULL)
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, RESERVED_WCID, (SrcBufLen - TXWI_SIZE), PID_MGMT, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
}
else
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXWI_SIZE),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
// pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif
SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 1;
pTxD->SDLen0 = SrcBufLen;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->DMADONE = 0;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
// Increase TX_CTX_IDX, but write to register later.
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx*0x10, pAd->TxRing[QueIdx].TxCpuIdx);
// Make sure to release MGMT ring resource
// NdisReleaseSpinLock(&pAd->TxRingLock);
return NDIS_STATUS_SUCCESS;
}
VOID CFG80211_UpdateBeacon(
VOID *pAdOrg,
UCHAR *beacon_head_buf,
UINT32 beacon_head_len,
UCHAR *beacon_tail_buf,
UINT32 beacon_tail_len,
BOOLEAN isAllUpdate)
{
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdOrg;
PCFG80211_CTRL pCfg80211_ctrl = &pAd->cfg80211_ctrl;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[MAIN_MBSSID].BeaconBuf;
TXWI_STRUC *pTxWI = &pAd->BeaconTxWI;
UCHAR New_Tim_Len;
UINT32 beacon_len;
/* Invoke From CFG80211 OPS For setting Beacon buffer */
if (isAllUpdate)
{
/* 1. Update the Before TIM IE */
NdisCopyMemory(pBeaconFrame, beacon_head_buf, beacon_head_len);
/* 2. Update the TIM IE */
pAd->ApCfg.MBSSID[MAIN_MBSSID].TimIELocationInBeacon = beacon_head_len;
/* 3. Store the Tail Part For appending later */
if (pCfg80211_ctrl->beacon_tail_buf != NULL)
os_free_mem(NULL, pCfg80211_ctrl->beacon_tail_buf);
os_alloc_mem(NULL, (UCHAR **)&pCfg80211_ctrl->beacon_tail_buf, beacon_tail_len);
if (pCfg80211_ctrl->beacon_tail_buf != NULL)
{
NdisCopyMemory(pCfg80211_ctrl->beacon_tail_buf, beacon_tail_buf, beacon_tail_len);
pCfg80211_ctrl->beacon_tail_len = beacon_tail_len;
}
else
{
pCfg80211_ctrl->beacon_tail_len = 0;
DBGPRINT(RT_DEBUG_ERROR, ("CFG80211 Beacon: MEM ALLOC ERROR\n"));
}
return;
}
else /* Invoke From Beacon Timer */
{
if (pAd->ApCfg.DtimCount == 0)
pAd->ApCfg.DtimCount = pAd->ApCfg.DtimPeriod - 1;
else
pAd->ApCfg.DtimCount -= 1;
}
/* 4. Update the TIM IE */
New_Tim_Len = CFG80211DRV_UpdateTimIE(pAd, MAIN_MBSSID, pBeaconFrame,
pAd->ApCfg.MBSSID[MAIN_MBSSID].TimIELocationInBeacon);
/* 5. Update the AFTER TIM IE */
if (pCfg80211_ctrl->beacon_tail_buf != NULL)
{
NdisCopyMemory(pAd->ApCfg.MBSSID[MAIN_MBSSID].BeaconBuf +
pAd->ApCfg.MBSSID[MAIN_MBSSID].TimIELocationInBeacon + New_Tim_Len,
pCfg80211_ctrl->beacon_tail_buf, pCfg80211_ctrl->beacon_tail_len);
beacon_len = pAd->ApCfg.MBSSID[MAIN_MBSSID].TimIELocationInBeacon + pCfg80211_ctrl->beacon_tail_len
+ New_Tim_Len;
}
else
{
DBGPRINT(RT_DEBUG_ERROR, ("BEACON ====> CFG80211_UpdateBeacon OOPS\n"));
return;
}
BeaconTransmit.word = 0;
#ifdef RT_CFG80211_P2P_SUPPORT
/* Should be Find the P2P IE Then Set Basic Rate to 6M */
if (RTMP_CFG80211_VIF_P2P_GO_ON(pAd))
BeaconTransmit.field.MODE = MODE_OFDM; /* Use 6Mbps */
else
#endif
BeaconTransmit.field.MODE = MODE_CCK;
BeaconTransmit.field.MCS = MCS_RATE_6;
//YF
RTMPWriteTxWI(pAd, (UCHAR *)pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
beacon_len, PID_MGMT, 0, 0, IFS_HTTXOP, &BeaconTransmit);
updateAllBeacon(pAd, MAIN_MBSSID, beacon_len);
}
int MlmeHardTransmitTxRing(struct rt_rtmp_adapter *pAd,
u8 QueIdx, void *pPacket)
{
struct rt_packet_info PacketInfo;
u8 *pSrcBufVA;
u32 SrcBufLen;
struct rt_txd * pTxD;
struct rt_header_802_11 * pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
unsigned long SrcBufPA;
/*u8 TxBufIdx; */
u8 MlmeRate;
unsigned long SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
struct rt_txwi * pFirstTxWI;
/*unsigned long i; */
/*HTTRANSMIT_SETTING MlmeTransmit; //Rate for this MGMT frame. */
unsigned long FreeNum;
struct rt_mac_table_entry *pMacEntry = NULL;
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL) {
/* The buffer shouldn't be NULL */
return NDIS_STATUS_FAILURE;
}
/* Make sure MGMT ring resource won't be used by other threads */
/*NdisAcquireSpinLock(&pAd->TxRingLock); */
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0) {
/*NdisReleaseSpinLock(&pAd->TxRingLock); */
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
pTxD = (struct rt_txd *) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket) {
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
/*NdisReleaseSpinLock(&pAd->TxRingLock); */
return NDIS_STATUS_FAILURE;
}
{
/* outgoing frame always wakeup PHY to prevent frame lost */
/* if (pAd->StaCfg.Psm == PWR_SAVE) */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
pFirstTxWI = (struct rt_txwi *) pSrcBufVA;
pHeader_802_11 = (struct rt_header_802_11 *) (pSrcBufVA + TXWI_SIZE);
if (pHeader_802_11->Addr1[0] & 0x01) {
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
} else {
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL)) {
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
/* Verify Mlme rate for a / g bands. */
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) /* 11A band */
MlmeRate = RATE_6;
/* */
/* Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) */
/* Snice it's been set to 0 while on MgtMacHeaderInit */
/* By the way this will cause frame to be send on PWR_SAVE failed. */
/* */
/* */
/* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
/* Data-Null packets also pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
if (pHeader_802_11->FC.Type != BTYPE_DATA) {
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ)
|| !(pAd->CommonCfg.bAPSDCapable
&& pAd->CommonCfg.APEdcaParm.bAPSDCapable)) {
pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
} else {
pHeader_802_11->FC.PwrMgmt =
pAd->CommonCfg.bAPSDForcePowerSave;
}
}
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) /* must be PS-POLL */
{
bAckRequired = FALSE;
} else /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame) */
{
if (pHeader_802_11->Addr1[0] & 0x01) /* MULTICAST, BROADCAST */
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
} else {
bAckRequired = TRUE;
pHeader_802_11->Duration =
RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP) {
bInsertTimestamp = TRUE;
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
/* Before radar detection done, mgmt frame can not be sent but probe req */
/* Because we need to use probe req to trigger driver to send probe req in passive scan */
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)) {
DBGPRINT(RT_DEBUG_ERROR,
("MlmeHardTransmit --> radar detect not in normal mode!\n"));
/*NdisReleaseSpinLock(&pAd->TxRingLock); */
return (NDIS_STATUS_FAILURE);
}
/* */
/* fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET */
/* should always has only one ohysical buffer, and the whole frame size equals */
/* to the first scatter buffer size */
/* */
/* Initialize TX Descriptor */
/* For inter-frame gap, the number is for this frame and next frame */
/* For MLME rate, we will fix as 2Mb to match other vendor's implement */
/* pAd->CommonCfg.MlmeTransmit.field.MODE = 1; */
/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not. */
/* Only beacon use Nseq=TRUE. So here we use Nseq=FALSE. */
if (pMacEntry == NULL) {
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp,
FALSE, bAckRequired, FALSE, 0, RESERVED_WCID,
(SrcBufLen - TXWI_SIZE), PID_MGMT, 0,
(u8)pAd->CommonCfg.MlmeTransmit.field.MCS,
IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
} else {
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXWI_SIZE),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(u8)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
/* pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE; */
SrcBufPA =
PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 1;
pTxD->SDLen0 = SrcBufLen;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->DMADONE = 0;
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
/* Increase TX_CTX_IDX, but write to register later. */
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * 0x10,
pAd->TxRing[QueIdx].TxCpuIdx);
/* Make sure to release MGMT ring resource */
/* NdisReleaseSpinLock(&pAd->TxRingLock); */
return NDIS_STATUS_SUCCESS;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#if defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT)
UINT i;
#endif /* defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT) */
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif /* DOT11K_RRM_SUPPORT */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif /* DOT11K_RRM_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif /* DOT11R_FT_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
updateAllBeacon(pAd, apidx, FrameLen);
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
void updateAllBeacon(RTMP_ADAPTER *pAd, INT apidx, ULONG FrameLen)
{
UCHAR *ptr = NULL;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
UINT32 longValue, reg_base;
UINT i = 0;
UINT8 TXWISize = pAd->chipCap.TXWISize;
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
}
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket)
{
PACKET_INFO PacketInfo;
PUCHAR pSrcBufVA;
UINT SrcBufLen;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL)
{
return NDIS_STATUS_FAILURE;
}
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0)
{
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
#ifndef RT_BIG_ENDIAN
pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
#else
pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#endif
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
{
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
#endif
pFirstTxWI =(PTXWI_STRUC)pSrcBufVA;
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
if (pHeader_802_11->Addr1[0] & 0x01)
{
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
}
else
{
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
{
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6))
MlmeRate = RATE_6;
#ifdef CONFIG_STA_SUPPORT
if (pHeader_802_11->FC.Type != BTYPE_DATA)
{
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ) || !(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
{
pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
}
else
{
pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
}
}
#endif
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL)
{
bAckRequired = FALSE;
}
else
{
if (pHeader_802_11->Addr1[0] & 0x01)
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
}
else
{
bAckRequired = TRUE;
pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
{
bInsertTimestamp = TRUE;
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE))
{
DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
return (NDIS_STATUS_FAILURE);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif
if (pMacEntry == NULL)
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, RESERVED_WCID, (SrcBufLen - TXWI_SIZE), PID_MGMT, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
}
else
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXWI_SIZE),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif
SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 1;
pTxD->SDLen0 = SrcBufLen;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->DMADONE = 0;
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx*0x10, pAd->TxRing[QueIdx].TxCpuIdx);
return NDIS_STATUS_SUCCESS;
}
/* REF: ap_connect.c ApMakeBssBeacon */
BOOLEAN CFG80211DRV_OpsBeaconSet(
VOID *pAdOrg,
VOID *pData,
BOOLEAN isAdd)
{
CFG80211DBG(RT_DEBUG_TRACE, ("80211> CFG80211DRV_OpsBeaconSet ==> %d\n", isAdd));
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdOrg;
CMD_RTPRIV_IOCTL_80211_BEACON *pBeacon;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
BCN_TIME_CFG_STRUC csr9;
UCHAR *ptr;
UINT i;
UINT32 longValue;
UINT8 TXWISize = pAd->chipCap.TXWISize;
UINT32 rx_filter_flag;
BOOLEAN TxPreamble, SpectrumMgmt = FALSE;
BOOLEAN bWmmCapable = FALSE;
UCHAR BBPR1 = 0, BBPR3 = 0;
INT idx;
ULONG offset;
CFG80211DBG(RT_DEBUG_TRACE, ("80211> CFG80211DRV_OpsBeaconSet ==> \n"));
pBeacon = (CMD_RTPRIV_IOCTL_80211_BEACON *)pData;
#ifdef WFD_SUPPORT
if (pAd->StaCfg.WfdCfg.bSuppInsertWfdIe)
{
ULONG TmpLen, WfdIeBitmap;
ptr = pBeacon->beacon + pBeacon->beacon_len;
WfdIeBitmap = (0x1 << SUBID_WFD_DEVICE_INFO) | (0x1 << SUBID_WFD_ASSOCIATED_BSSID) |
(0x1 << SUBID_WFD_COUPLED_SINK_INFO);
WfdMakeWfdIE(pAd, WfdIeBitmap, ptr, &TmpLen);
pBeacon->beacon_len += TmpLen;
}
#endif /* WFD_SUPPORT */
if (isAdd)
{
rx_filter_flag = APNORMAL;
RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag); /* enable RX of DMA block */
pAd->ApCfg.BssidNum = 1;
pAd->MacTab.MsduLifeTime = 20; /* default 5 seconds */
pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = TRUE;
#ifdef INF_AMAZON_SE
printk("YF DEBUG: INF_AMAZON_SE\n");
for (i = 0; i < NUM_OF_TX_RING; i++)
{
pAd->BulkOutDataSizeLimit[i]=24576;
}
#endif /* INF_AMAZON_SE */
AsicDisableSync(pAd);
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
if (pAd->CommonCfg.Channel > 14)
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11AN_MIXED;
else
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11BGN_MIXED;
}
else
{
if (pAd->CommonCfg.Channel > 14)
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11A;
else
pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11BG_MIXED;
}
TxPreamble = (pAd->CommonCfg.TxPreamble == Rt802_11PreambleLong ? 0 : 1);
}
PMULTISSID_STRUCT pMbss = &pAd->ApCfg.MBSSID[MAIN_MBSSID];
const UCHAR *ssid_ie = NULL;
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33))
ssid_ie = cfg80211_find_ie(WLAN_EID_SSID, pBeacon->beacon+36, pBeacon->beacon_len-36);
#endif
NdisZeroMemory(pMbss->Ssid, pMbss->SsidLen);
if (ssid_ie == NULL)
{
printk("YF Debug: SSID Not Found In Packet\n");
NdisMoveMemory(pMbss->Ssid, "P2P_Linux_AP", 12);
pMbss->SsidLen = 12;
}
else
{
pMbss->SsidLen = ssid_ie[1];
NdisCopyMemory(pMbss->Ssid, ssid_ie+2, pMbss->SsidLen);
printk("YF Debug: SSID: %s, %d\n", pMbss->Ssid, pMbss->SsidLen);
}
if (isAdd)
{
//if (pMbss->bWmmCapable)
//{
bWmmCapable = FALSE;
pMbss->bWmmCapable = FALSE;
//}
pMbss->MSSIDDev = pAd->net_dev;
COPY_MAC_ADDR(pMbss->Bssid, pAd->CurrentAddress);
printk("AP BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", PRINT_MAC(pAd->CurrentAddress));
/* GO always use WPA2PSK / AES */
pMbss->AuthMode = Ndis802_11AuthModeWPA2PSK;
pMbss->WepStatus = Ndis802_11Encryption3Enabled;
pMbss->WscSecurityMode = WPA2PSKAES;
pMbss->GroupKeyWepStatus = pMbss->WepStatus;
pMbss->CapabilityInfo =
CAP_GENERATE(1, 0, (pMbss->WepStatus != Ndis802_11EncryptionDisabled), TxPreamble, pAd->CommonCfg.bUseShortSlotTime, SpectrumMgmt);
RTMPMakeRSNIE(pAd, Ndis802_11AuthModeWPA2PSK, Ndis802_11Encryption3Enabled, MAIN_MBSSID);
#ifdef DOT11_N_SUPPORT
RTMPSetPhyMode(pAd, pAd->CommonCfg.PhyMode);
SetCommonHT(pAd);
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->Antenna.field.TxPath == 2))
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
BBPR1 &= (~0x18);
BBPR1 |= 0x10;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1);
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
BBPR1 &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1);
}
/* Receiver Antenna selection, write to BBP R3(bit4:3) */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
BBPR3 &= (~0x18);
if(pAd->Antenna.field.RxPath == 3)
{
BBPR3 |= (0x10);
}
else if(pAd->Antenna.field.RxPath == 2)
{
BBPR3 |= (0x8);
}
else if(pAd->Antenna.field.RxPath == 1)
{
BBPR3 |= (0x0);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
if(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
{
if ((pAd->CommonCfg.PhyMode > PHY_11G) || bWmmCapable)
{
/* EDCA parameters used for AP's own transmission */
pAd->CommonCfg.APEdcaParm.bValid = TRUE;
pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
pAd->CommonCfg.APEdcaParm.Txop[2] = 94; /*96; */
pAd->CommonCfg.APEdcaParm.Txop[3] = 47; /*48; */
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
/* EDCA parameters to be annouced in outgoing BEACON, used by WMM STA */
pAd->ApCfg.BssEdcaParm.bValid = TRUE;
pAd->ApCfg.BssEdcaParm.Aifsn[0] = 3;
pAd->ApCfg.BssEdcaParm.Aifsn[1] = 7;
pAd->ApCfg.BssEdcaParm.Aifsn[2] = 2;
pAd->ApCfg.BssEdcaParm.Aifsn[3] = 2;
pAd->ApCfg.BssEdcaParm.Cwmin[0] = 4;
pAd->ApCfg.BssEdcaParm.Cwmin[1] = 4;
pAd->ApCfg.BssEdcaParm.Cwmin[2] = 3;
pAd->ApCfg.BssEdcaParm.Cwmin[3] = 2;
pAd->ApCfg.BssEdcaParm.Cwmax[0] = 10;
pAd->ApCfg.BssEdcaParm.Cwmax[1] = 10;
pAd->ApCfg.BssEdcaParm.Cwmax[2] = 4;
pAd->ApCfg.BssEdcaParm.Cwmax[3] = 3;
pAd->ApCfg.BssEdcaParm.Txop[0] = 0;
pAd->ApCfg.BssEdcaParm.Txop[1] = 0;
pAd->ApCfg.BssEdcaParm.Txop[2] = 94; /*96; */
pAd->ApCfg.BssEdcaParm.Txop[3] = 47; /*48; */
}
else
{
AsicSetEdcaParm(pAd, NULL);
}
}
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED)
{
/* Patch UI */
pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = BW_20;
}
/* init */
if (pAd->CommonCfg.bRdg)
{
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RDG_ACTIVE);
AsicEnableRDG(pAd);
}
else
{
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RDG_ACTIVE);
AsicDisableRDG(pAd);
}
#endif /* DOT11_N_SUPPORT */
//AsicSetBssid(pAd, pAd->CurrentAddress);
AsicSetMcastWC(pAd);
/* In AP mode, First WCID Table in ASIC will never be used. To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here. */
/* p.s ASIC use all 0xff as termination of WCID table search. */
RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00);
RTMP_IO_WRITE32(pAd, MAC_WCID_BASE+4, 0x0);
/* reset WCID table */
for (idx=2; idx<255; idx++)
{
offset = MAC_WCID_BASE + (idx * HW_WCID_ENTRY_SIZE);
RTMP_IO_WRITE32(pAd, offset, 0x0);
RTMP_IO_WRITE32(pAd, offset+4, 0x0);
}
pAd->MacTab.Content[0].Addr[0] = 0x01;
pAd->MacTab.Content[0].HTPhyMode.field.MODE = MODE_OFDM;
pAd->MacTab.Content[0].HTPhyMode.field.MCS = 3;
AsicBBPAdjust(pAd);
//MlmeSetTxPreamble(pAd, (USHORT)pAd->CommonCfg.TxPreamble);
{
ULONG Addr4;
UINT32 regValue;
PUCHAR pP2PBssid = &pAd->CurrentAddress[0];
Addr4 = (ULONG)(pP2PBssid[0]) |
(ULONG)(pP2PBssid[1] << 8) |
(ULONG)(pP2PBssid[2] << 16) |
(ULONG)(pP2PBssid[3] << 24);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW0, Addr4);
Addr4 = 0;
Addr4 = (ULONG)(pP2PBssid[4]) | (ULONG)(pP2PBssid[5] << 8);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, Addr4);
RTMP_IO_READ32(pAd, MAC_BSSID_DW1, ®Value);
regValue &= 0x0000FFFF;
regValue |= (1 << 16);
if (pAd->chipCap.MBSSIDMode == MBSSID_MODE1)
regValue |= (1 << 21);
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, regValue);
}
#ifdef RTMP_MAC_USB
printk("YF DEBUG: RTUSBBssBeaconInit\n");
RTUSBBssBeaconInit(pAd);
#endif /* RTMP_MAC_USB */
}
UCHAR apcliIdx, apidx = MAIN_MBSSID;
//pAd->ApCfg.MBSSID[MAIN_MBSSID].PhyMode = PHY_11BGN_MIXED;
printk("YF DEBUG: Beacon Len %d\n", pBeacon->beacon_len);
printk("YF DEBUG: Beacon Interval %d\n", pBeacon->interval);
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
pBeacon->beacon_len, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
for (i=0; i<TXWISize; i+=4) /* 16-byte TXWI field */
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[0] + i, longValue);
ptr += 4;
}
/* update BEACON frame content. start right after the 16-byte TXWI field. */
ptr = pBeacon->beacon;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
for (i= 0; i< pBeacon->beacon_len; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[0] + TXWISize + i, longValue);
ptr += 4;
}
if (isAdd)
{
/* Enable Bss Sync*/
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr9.word);
csr9.field.BeaconInterval = (pBeacon->interval) << 4; /* ASIC register in units of 1/16 TU*/
csr9.field.bTsfTicking = 1;
csr9.field.TsfSyncMode = 3;
csr9.field.bTBTTEnable = 1;
csr9.field.bBeaconGen = 1;
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
pAd->P2pCfg.bSentProbeRSP = TRUE;
#ifdef RTMP_MAC_USB
/*
* Support multiple BulkIn IRP,
* the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
*/
UCHAR num_idx;
for(num_idx=0; num_idx < pAd->CommonCfg.NumOfBulkInIRP; num_idx++)
{
RTUSBBulkReceive(pAd);
printk("RTUSBBulkReceive!\n" );
}
#endif /* RTMP_MAC_USB */
}
#ifdef WFD_SUPPORT
pAd->StaCfg.WfdCfg.bSuppGoOn = TRUE;
#endif /* WFD_SUPPORT */
return TRUE;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame;
UCHAR *ptr;
ULONG FrameLen;
ULONG UpdatePos;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
struct wifi_dev *wdev;
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
pComCfg = &pAd->CommonCfg;
pMbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &pMbss->wdev;
pBeaconFrame = (UCHAR *)&pMbss->BeaconBuf[0];
FrameLen = UpdatePos = pMbss->TimIELocationInBeacon;
PhyMode = wdev->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
/* move RSN IE from below to here for Ralink Win7 v3.0.0.61 version parse beacon issue. */
/* sync the order with BRCM's AP. */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) ||
(wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
/* Append RSN_IE when WPA OR WPAPSK, */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef HOSTAPD_SUPPORT
if (pMbss->HostapdWPS && (pMbss->WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pMbss->WscIEBeacon.ValueLen, pMbss->WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
INT tp_len, wb_len = 0;
UCHAR *ch_sw_wrapper;
VHT_TXPWR_ENV_IE txpwr_env;
*ptr = IE_CH_SWITCH_WRAPPER;
ch_sw_wrapper = (UCHAR *)(ptr + 1); // reserve for length
ptr += 2; // skip len
if (pComCfg->RegTransmitSetting.field.BW == BW_40) {
WIDE_BW_CH_SWITCH_ELEMENT wb_info;
*ptr = IE_WIDE_BW_CH_SWITCH;
*(ptr + 1) = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += 2;
NdisZeroMemory(&wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
if (pComCfg->vht_bw == VHT_BW_2040)
wb_info.new_ch_width = 0;
else
wb_info.new_ch_width = 1;
if (pComCfg->vht_bw == VHT_BW_80) {
wb_info.center_freq_1 = vht_cent_ch_freq(pAd, pComCfg->Channel);
wb_info.center_freq_2 = 0;
}
NdisMoveMemory(ptr, &wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
wb_len = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += wb_len;
wb_len += 2;
}
*ptr = IE_VHT_TXPWR_ENV;
NdisZeroMemory(&txpwr_env, sizeof(VHT_TXPWR_ENV_IE));
tp_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
*(ptr + 1) = tp_len;
ptr += 2;
NdisMoveMemory(ptr, &txpwr_env, tp_len);
ptr += tp_len;
tp_len += 2;
*ch_sw_wrapper = wb_len + tp_len;
FrameLen += (2 + wb_len + tp_len);
}
#endif /* DOT11_VHT_AC */
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->wdev.DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14))
extCapInfo.operating_mode_notification = 1;
#endif /* DOT11_VHT_AC */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef WFA_VHT_PF
if (pAd->force_vht_op_mode == TRUE)
{
ULONG TmpLen;
UCHAR operating_ie = IE_OPERATING_MODE_NOTIFY, operating_len = 1;
OPERATING_MODE operating_mode;
operating_mode.rx_nss_type = 0;
operating_mode.rx_nss = (pAd->vht_pf_op_ss - 1);
operating_mode.ch_width = pAd->vht_pf_op_bw;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &operating_ie,
1, &operating_len,
1, &operating_mode,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* WFA_VHT_PF */
/* add WMM IE here */
if (pMbss->wdev.bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (pComCfg->b256QAM_2G && WMODE_2G_ONLY(pComCfg->PhyMode))
RalinkSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, RESERVED_WCID,
FrameLen, PID_MGMT, 0 /*QID_MGMT*/, 0, IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN PNDIS_PACKET pPacket)
{
PACKET_INFO PacketInfo;
PUCHAR pSrcBufVA;
UINT SrcBufLen;
PTXD_STRUC pTxD;
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
#endif
PHEADER_802_11 pHeader_802_11;
BOOLEAN bAckRequired, bInsertTimestamp;
ULONG SrcBufPA;
/*UCHAR TxBufIdx;*/
UCHAR MlmeRate;
ULONG SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
PTXWI_STRUC pFirstTxWI;
/*ULONG i;*/
/*HTTRANSMIT_SETTING MlmeTransmit; Rate for this MGMT frame.*/
ULONG FreeNum;
MAC_TABLE_ENTRY *pMacEntry = NULL;
UINT8 TXWISize = pAd->chipCap.TXWISize;
#ifdef CONFIG_AP_SUPPORT
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
if (pSrcBufVA == NULL)
{
/* The buffer shouldn't be NULL*/
return NDIS_STATUS_FAILURE;
}
/* Make sure MGMT ring resource won't be used by other threads*/
/*NdisAcquireSpinLock(&pAd->TxRingLock);*/
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNum == 0)
{
/*NdisReleaseSpinLock(&pAd->TxRingLock);*/
return NDIS_STATUS_FAILURE;
}
SwIdx = pAd->TxRing[QueIdx].TxCpuIdx;
#ifdef RT_BIG_ENDIAN
pDestTxD = (PTXD_STRUC)pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
TxD = *pDestTxD;
pTxD = &TxD;
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
#else
pTxD = (PTXD_STRUC) pAd->TxRing[QueIdx].Cell[SwIdx].AllocVa;
#endif
if (pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket)
{
DBGPRINT(RT_DEBUG_OFF, ("MlmeHardTransmit Error\n"));
/*NdisReleaseSpinLock(&pAd->TxRingLock);*/
return NDIS_STATUS_FAILURE;
}
pFirstTxWI =(PTXWI_STRUC)(pSrcBufVA + TXINFO_SIZE);
pHeader_802_11 = (PHEADER_802_11)(pSrcBufVA + TXINFO_SIZE + TXWISize);
if (pHeader_802_11->Addr1[0] & 0x01)
{
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
}
else
{
MlmeRate = pAd->CommonCfg.MlmeRate;
}
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
(pHeader_802_11->FC.SubType == SUBTYPE_QOS_NULL))
{
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
/* Verify Mlme rate for a / g bands.*/
if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) /* 11A band*/
MlmeRate = RATE_6;
/*
Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
Snice it's been set to 0 while on MgtMacHeaderInit
By the way this will cause frame to be send on PWR_SAVE failed.
*/
/* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame*/
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) /* must be PS-POLL*/
{
bAckRequired = FALSE;
}
else /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame)*/
{
if (pHeader_802_11->Addr1[0] & 0x01) /* MULTICAST, BROADCAST*/
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
}
else
{
bAckRequired = TRUE;
pHeader_802_11->Duration = RTMPCalcDuration(pAd, MlmeRate, 14);
if (pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
{
bInsertTimestamp = TRUE;
#ifdef CONFIG_AP_SUPPORT
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Find which MBSSID to be send this probeRsp */
UINT32 apidx;
for (apidx=0; apidx<pAd->ApCfg.BssidNum; apidx++)
{
if (RTMPEqualMemory(pHeader_802_11->Addr2, pAd->ApCfg.MBSSID[apidx].Bssid, MAC_ADDR_LEN))
break;
}
if (!(apidx >= pAd->ApCfg.BssidNum) &&
(pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) &&
(pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_CCK) &&
(pAd->CommonCfg.MlmeTransmit.field.MCS == RATE_1))
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
#endif /* CONFIG_AP_SUPPORT */
}
}
}
pHeader_802_11->Sequence = pAd->Sequence++;
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
/* Before radar detection done, mgmt frame can not be sent but probe req*/
/* Because we need to use probe req to trigger driver to send probe req in passive scan*/
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode != RD_NORMAL_MODE))
{
DBGPRINT(RT_DEBUG_ERROR,("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
/*NdisReleaseSpinLock(&pAd->TxRingLock);*/
return (NDIS_STATUS_FAILURE);
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)pHeader_802_11, DIR_WRITE, FALSE);
#endif
/*
Fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
should always has only one ohysical buffer, and the whole frame size equals
to the first scatter buffer size
*/
/*
Initialize TX Descriptor
For inter-frame gap, the number is for this frame and next frame
For MLME rate, we will fix as 2Mb to match other vendor's implement
*/
/* pAd->CommonCfg.MlmeTransmit.field.MODE = 1;*/
/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.*/
/* Only beacon use Nseq=TRUE. So here we use Nseq=FALSE.*/
if (pMacEntry == NULL)
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE, bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, RESERVED_WCID, (SrcBufLen - TXINFO_SIZE - TXWISize), PID_MGMT, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
if (IS_RT6352(pAd))
pFirstTxWI->TxPwrAdj = TxPwrAdj;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
}
else
{
RTMPWriteTxWI(pAd, pFirstTxWI, FALSE, FALSE,
bInsertTimestamp, FALSE, bAckRequired, FALSE,
0, pMacEntry->Aid, (SrcBufLen - TXINFO_SIZE - TXWISize),
pMacEntry->MaxHTPhyMode.field.MCS, 0,
(UCHAR)pMacEntry->MaxHTPhyMode.field.MCS,
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
pAd->TxRing[QueIdx].Cell[SwIdx].pNdisPacket = pPacket;
pAd->TxRing[QueIdx].Cell[SwIdx].pNextNdisPacket = NULL;
/* pFirstTxWI->MPDUtotalByteCount = SrcBufLen - TXWI_SIZE;*/
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, (PUCHAR)pFirstTxWI, TYPE_TXWI);
#endif
SrcBufPA = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, RTMP_PCI_DMA_TODEVICE);
pTxD->LastSec0 = 1;
pTxD->LastSec1 = 0;
pTxD->SDLen1 = 0;
pTxD->SDPtr0 = SrcBufPA;
pTxD->SDLen0 = SrcBufLen;
RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_EDCA);
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
WriteBackToDescriptor((PUCHAR)pDestTxD, (PUCHAR)pTxD, FALSE, TYPE_TXD);
#endif
pAd->RalinkCounters.KickTxCount++;
pAd->RalinkCounters.OneSecTxDoneCount++;
/* flush dcache if no consistent memory is supported */
RTMP_DCACHE_FLUSH(SrcBufPA, SrcBufLen);
RTMP_DCACHE_FLUSH(pAd->TxRing[QueIdx].Cell[SwIdx].AllocPa, RXD_SIZE);
/* Increase TX_CTX_IDX, but write to register later.*/
INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx*0x10, pAd->TxRing[QueIdx].TxCpuIdx);
/* Make sure to release MGMT ring resource*/
/* NdisReleaseSpinLock(&pAd->TxRingLock);*/
return NDIS_STATUS_SUCCESS;
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;//, TimLen = 4,
//BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen;
// UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR, pAd->ApCfg.MBSSID[apidx].Bssid);
// for update framelen to TxWI later.
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &pAd->CommonCfg.SupRateLen,
pAd->CommonCfg.SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if (pAd->CommonCfg.ExtRateLen)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
// add country IE, power constraint IE
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR TmpFrame[256];
UCHAR CountryIe = IE_COUNTRY;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
// prepare channel information
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif // EXT_BUILD_CHANNEL_LIST //
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif // DOT11K_RRM_SUPPORT //
// need to do the padding bit check, and concatenate it
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif // DOT11K_RRM_SUPPORT //
#ifdef DOT11_N_SUPPORT
// AP Channel Report
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
// 802.11n D2.0 Annex J
// USA
// regulatory class 32, channel set 1~7
// regulatory class 33, channel set 5-11
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; //sizeof(rclass32);
if (pAd->CommonCfg.PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif // DOT11_N_SUPPORT //
#ifdef WSC_AP_SUPPORT
// add Simple Config Information Element
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
#ifdef HOSTAPD_SUPPORT
|| pAd->ApCfg.HostapdWPS
#endif
)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif // DOT1X_SUPPORT //
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif // WSC_AP_SUPPORT //
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif // DOT11R_FT_SUPPORT //
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
#ifdef RT3593
/*
Shared memory access selection (higher 8KB shared memory)
*/
RTMP_RF33_SHARED_MEM_SELECT(pAd);
#endif // RT3593 //
//
// step 6. move BEACON TXD and frame content to on-chip memory
//
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, reg_base + i, longValue);
ptr += 4;
}
// update BEACON frame content. start right after the 16-byte TXWI field.
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWI_SIZE;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_IO_WRITE32(pAd, reg_base + i, longValue);
ptr += 4;
}
#ifdef RT3593
/*
Set the beacon offset (higher 8KB shared memory)
Shared memory access selection (lower 8KB shared memory)
*/
RTMP_RF33_SHARED_MEM_DESELECT(pAd);
#endif // RT3593 //
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
