Exemplo n.º 1
0
static int setdma_tx(struct s3c_ep *ep, struct s3c_request *req)
{
	u32 *buf, ctrl = 0;
	u32 length, pktcnt;
	u32 ep_num = ep_index(ep);
	struct device *dev = &the_controller->dev->dev;

	buf = req->req.buf + req->req.actual;
	prefetch(buf);
	length = req->req.length - req->req.actual;

	if (ep_num == EP0_CON)
		length = min(length, (u32)ep_maxpacket(ep));

	req->req.actual += length;
	req->req.dma = dma_map_single(dev, buf,
			length, DMA_TO_DEVICE);
	req->mapped = 1;

	if (length == 0)
		pktcnt = 1;
	else
		pktcnt = (length - 1)/(ep->ep.maxpacket) + 1;

#ifdef DED_TX_FIFO
	/* Flush the endpoint's Tx FIFO */
	writel(ep_num<<6, S3C_UDC_OTG_GRSTCTL);
	writel((ep_num<<6)|0x20, S3C_UDC_OTG_GRSTCTL);
	while (readl(S3C_UDC_OTG_GRSTCTL) & 0x20)
		;

	/* Write the FIFO number to be used for this endpoint */
	ctrl = readl(S3C_UDC_OTG_DIEPCTL(ep_num));
	ctrl &= ~DEPCTL_TXFNUM_MASK;;
	ctrl |= (ep_num << DEPCTL_TXFNUM_BIT);
	writel(ctrl , S3C_UDC_OTG_DIEPCTL(ep_num));
#endif

	writel(virt_to_phys(buf), S3C_UDC_OTG_DIEPDMA(ep_num));
	writel((pktcnt<<19)|(length<<0), S3C_UDC_OTG_DIEPTSIZ(ep_num));
	ctrl = readl(S3C_UDC_OTG_DIEPCTL(ep_num));
	writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, S3C_UDC_OTG_DIEPCTL(ep_num));

#ifndef DED_TX_FIFO
	ctrl = readl(S3C_UDC_OTG_DIEPCTL(EP0_CON));
	ctrl = (ctrl&~(EP_MASK<<DEPCTL_NEXT_EP_BIT))|(ep_num<<DEPCTL_NEXT_EP_BIT);
	writel(ctrl, S3C_UDC_OTG_DIEPCTL(EP0_CON));
#endif

	DEBUG_IN_EP("%s:EP%d TX DMA start : DIEPDMA0 = 0x%x, DIEPTSIZ0 = 0x%x, DIEPCTL0 = 0x%x\n"
			"\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
			__func__, ep_num,
			readl(S3C_UDC_OTG_DIEPDMA(ep_num)),
			readl(S3C_UDC_OTG_DIEPTSIZ(ep_num)),
			readl(S3C_UDC_OTG_DIEPCTL(ep_num)),
			buf, pktcnt, length);

	return length;
}
Exemplo n.º 2
0
static int setdma_tx(struct s3c_ep *ep, struct s3c_request *req)
{
	u32 *buf, ctrl = 0;
	u32 length, pktcnt;
	u32 ep_num = ep_index(ep);

	buf = req->req.buf + req->req.actual;
	prefetch(buf);
	length = req->req.length - req->req.actual;

	if (ep_num == EP0_CON) {
		length = min(length, (u32)ep_maxpacket(ep));
	}

	req->req.actual += length;
	dma_cache_maint(buf, length, DMA_TO_DEVICE);

	if (length == 0)
		pktcnt = 1;
	else
		pktcnt = (length - 1)/(ep->ep.maxpacket) + 1;

#ifdef DED_TX_FIFO
	/* Write the FIFO number to be used for this endpoint */
	ctrl = readl(S3C_UDC_OTG_DIEPCTL(ep_num));
	ctrl &= ~DEPCTL_TXFNUM_MASK;;
	ctrl |= (ep_num << DEPCTL_TXFNUM_BIT);
	writel(ctrl , S3C_UDC_OTG_DIEPCTL(ep_num));
#endif

	writel(virt_to_phys(buf), S3C_UDC_OTG_DIEPDMA(ep_num));
	writel((pktcnt<<19)|(length<<0), S3C_UDC_OTG_DIEPTSIZ(ep_num));
	ctrl = readl(S3C_UDC_OTG_DIEPCTL(ep_num));
	writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, S3C_UDC_OTG_DIEPCTL(ep_num));

	ctrl = readl(S3C_UDC_OTG_DIEPCTL(EP0_CON));
	ctrl = (ctrl&~(EP_MASK<<DEPCTL_NEXT_EP_BIT))|(ep_num<<DEPCTL_NEXT_EP_BIT);
	writel(ctrl, S3C_UDC_OTG_DIEPCTL(EP0_CON));

	DEBUG_IN_EP("%s:EP%d TX DMA start : DIEPDMA0 = 0x%x, DIEPTSIZ0 = 0x%x, DIEPCTL0 = 0x%x\n"
			"\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
			__func__, ep_num,
			readl(S3C_UDC_OTG_DIEPDMA(ep_num)),
			readl(S3C_UDC_OTG_DIEPTSIZ(ep_num)),
			readl(S3C_UDC_OTG_DIEPCTL(ep_num)),
			buf, pktcnt, length);

	return length;
}
Exemplo n.º 3
0
static inline void s3c_udc_ep0_zlp(void)
{
	u32 ep_ctrl;

	writel(virt_to_phys(&usb_ctrl), S3C_UDC_OTG_DIEPDMA(EP0_CON));
	writel((1<<19 | 0<<0), S3C_UDC_OTG_DIEPTSIZ(EP0_CON));

	ep_ctrl = readl(S3C_UDC_OTG_DIEPCTL(EP0_CON));
	writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, S3C_UDC_OTG_DIEPCTL(EP0_CON));

	DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
		__func__, readl(S3C_UDC_OTG_DIEPCTL(EP0_CON)));
}
static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev)
{
	u32 ep_ctrl;

	__raw_writel(dev->usb_ctrl_dma, dev->regs + S3C_UDC_OTG_DIEPDMA(EP0_CON));
	__raw_writel((1<<19 | 0<<0), dev->regs + S3C_UDC_OTG_DIEPTSIZ(EP0_CON));

	ep_ctrl = __raw_readl(dev->regs + S3C_UDC_OTG_DIEPCTL(EP0_CON));
	__raw_writel(ep_ctrl | DEPCTL_EPENA | DEPCTL_CNAK,
		dev->regs + S3C_UDC_OTG_DIEPCTL(EP0_CON));

	DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
		__func__, __raw_readl(dev->regs + S3C_UDC_OTG_DIEPCTL(EP0_CON)));
}
Exemplo n.º 5
0
static inline void s3c_udc_ep0_zlp(void)
{
	u32 ep_ctrl;

	writel(virt_to_phys(&usb_ctrl), S3C_UDC_OTG_DIEPDMA(EP0_CON));
	writel((1<<19| 0<<0), S3C_UDC_OTG_DIEPTSIZ(EP0_CON));

	ep_ctrl = readl(S3C_UDC_OTG_DIEPCTL(EP0_CON));
	writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, S3C_UDC_OTG_DIEPCTL(EP0_CON));

	if (currentusbstatus == USBSTATUS_VTP)
		printk("TETHERING::s3c_udc_ep0_zlp\n");
		DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
		__func__, readl(S3C_UDC_OTG_DIEPCTL(EP0_CON)));
}
Exemplo n.º 6
0
static int setdma_tx(struct s3c_ep *ep, struct s3c_request *req)
{
	u32 *buf, ctrl = 0;
	u32 length, pktcnt;
	u32 ep_num = ep_index(ep);
	struct s3c_udc *udc = ep->dev;
	struct device *dev = &udc->dev->dev;

	aligned_map_buf(req, ep_is_in(ep));
	buf = req->req.buf + req->req.actual;
	prefetch(buf);
	length = req->req.length - req->req.actual;

	if (ep_num == EP0_CON)
		length = min_t(u32, length, (u32)ep_maxpacket(ep));

	req->req.actual += length;

	req->req.dma = dma_map_single(dev, buf,
			length, DMA_TO_DEVICE);
	req->mapped = 1;

	if (length == 0)
		pktcnt = 1;
	else
		pktcnt = (length - 1)/(ep->ep.maxpacket) + 1;

#ifdef DED_TX_FIFO
	/* Write the FIFO number to be used for this endpoint */
	ctrl = __raw_readl(udc->regs + S3C_UDC_OTG_DIEPCTL(ep_num));
	ctrl &= ~DEPCTL_TXFNUM_MASK;
	ctrl |= (ep_num << DEPCTL_TXFNUM_BIT);
	__raw_writel(ctrl , udc->regs + S3C_UDC_OTG_DIEPCTL(ep_num));
#endif

	__raw_writel(virt_to_phys(buf),
		udc->regs + S3C_UDC_OTG_DIEPDMA(ep_num));
	__raw_writel((pktcnt<<19)|(length<<0),
		udc->regs + S3C_UDC_OTG_DIEPTSIZ(ep_num));
	ctrl = __raw_readl(udc->regs + S3C_UDC_OTG_DIEPCTL(ep_num));

	if ((ctrl & DEPCTL_TYPE_MASK) == DEPCTL_ISO_TYPE) {
		if (ctrl & DEPCTL_EO_FRNUM)
			ctrl |= DEPCTL_SETD0PID;
		else
			ctrl |= DEPCTL_SETD1PID;
	}

	__raw_writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl,
		udc->regs + S3C_UDC_OTG_DIEPCTL(ep_num));

#ifndef DED_TX_FIFO
	ctrl = __raw_readl(udc->regs + S3C_UDC_OTG_DIEPCTL(EP0_CON));
	ctrl = (ctrl & ~(EP_MASK<<DEPCTL_NEXT_EP_BIT)) |
		(ep_num<<DEPCTL_NEXT_EP_BIT);
	__raw_writel(ctrl, udc->regs + S3C_UDC_OTG_DIEPCTL(EP0_CON));
#endif

	DEBUG_IN_EP("%s:EP%d TX DMA start : DIEPDMA0 = 0x%x,"
			"DIEPTSIZ0 = 0x%x, DIEPCTL0 = 0x%x\n"
			"\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
			__func__, ep_num,
			__raw_readl(udc->regs + S3C_UDC_OTG_DIEPDMA(ep_num)),
			__raw_readl(udc->regs + S3C_UDC_OTG_DIEPTSIZ(ep_num)),
			__raw_readl(udc->regs + S3C_UDC_OTG_DIEPCTL(ep_num)),
			buf, pktcnt, length);

	req->written_bytes = length;
	return length;
}