int s3cfb_reset_lcd(struct platform_device *pdev)
{
int err;
err = gpio_request(S5PC1XX_GPH0(6), "GPH0");
if (err) {
printk(KERN_ERR "failed to request GPH0 for "
"lcd reset control\n");
return err;
}
gpio_direction_output(S5PC1XX_GPH0(6), 1);
mdelay(100);
gpio_set_value(S5PC1XX_GPH0(6), 0);
mdelay(10);
gpio_set_value(S5PC1XX_GPH0(6), 1);
mdelay(10);
gpio_free(S5PC1XX_GPH0(6));
return 0;
}
static irqreturn_t __s5p_hpd_irq(int irq, void *dev_id)
{
spin_lock_irq(&slock_hpd);
s5ptv_status.hpd_status = gpio_get_value(S5PC1XX_GPH0(5))
? false:true;
if(s5ptv_status.hpd_status){
set_irq_type(IRQ_EINT5, IRQ_TYPE_EDGE_RISING);
}else{
set_irq_type(IRQ_EINT5, IRQ_TYPE_EDGE_FALLING);
}
if (s5ptv_status.hdcp_en)
schedule_work(&ws_hpd);
spin_unlock_irq(&slock_hpd);
BASEPRINTK("hpd_status = %d\n", s5ptv_status.hpd_status);
return IRQ_HANDLED;
}
int s3cfb_set_gpio(void)
{
int i, err;
/* LCD_HSYNC, LCD_VSYNC, LCD_VDEN, LCD_VCLK, VD[23:0] */
for (i = 0; i < 8; i++)
s3c_gpio_cfgpin(S5PC1XX_GPF0(i), S3C_GPIO_SFN(2));
for (i = 0; i < 8; i++)
s3c_gpio_cfgpin(S5PC1XX_GPF1(i), S3C_GPIO_SFN(2));
for (i = 0; i < 8; i++)
s3c_gpio_cfgpin(S5PC1XX_GPF2(i), S3C_GPIO_SFN(2));
for (i = 0; i < 4; i++)
s3c_gpio_cfgpin(S5PC1XX_GPF3(i), S3C_GPIO_SFN(2));
#ifndef CONFIG_BACKLIGHT_PWM
/* backlight ON */
if (gpio_is_valid(S5PC1XX_GPD(0))) {
err = gpio_request(S5PC1XX_GPD(0), "GPD");
if (err) {
printk(KERN_ERR "failed to request GPD for "
"lcd backlight control\n");
return err;
}
gpio_direction_output(S5PC1XX_GPD(0), 1);
}
#endif
/* module reset */
if (gpio_is_valid(S5PC1XX_GPH0(6))) {
err = gpio_request(S5PC1XX_GPH0(6), "GPH0");
if (err) {
printk(KERN_ERR "failed to request GPH0 for "
"lcd reset control\n");
return err;
}
gpio_direction_output(S5PC1XX_GPH0(6), 1);
}
mdelay(100);
gpio_set_value(S5PC1XX_GPH0(6), 0);
mdelay(10);
gpio_set_value(S5PC1XX_GPH0(6), 1);
mdelay(10);
gpio_free(S5PC1XX_GPH0(6));
#ifndef CONFIG_BACKLIGHT_PWM
gpio_free(S5PC1XX_GPD(0));
#endif
return 0;
}
static irqreturn_t __s5p_hpd_irq(int irq, void *dev_id)
{
if(gpio_get_value(S5PC11X_GPH1(5)))
{
printk("\n cable inserted \n");
set_irq_type(IRQ_EINT13, IRQ_TYPE_EDGE_FALLING);
}
else
{
printk("\n cable removed\n");
set_irq_type(IRQ_EINT13,IRQ_TYPE_EDGE_RISING);
}
#if 0
spin_lock_irq(&slock_hpd);
#ifdef CONFIG_CPU_S5PC110
//mkh:
s5ptv_status.hpd_status = gpio_get_value(S5PC11X_GPH0(5))
? false:true;
#else
s5ptv_status.hpd_status = gpio_get_value(S5PC1XX_GPH0(5))
? false:true;
#endif
if(s5ptv_status.hpd_status){
set_irq_type(IRQ_EINT5, IRQ_TYPE_EDGE_RISING);
}else{
set_irq_type(IRQ_EINT5, IRQ_TYPE_EDGE_FALLING);
}
if (s5ptv_status.hdcp_en)
schedule_work(&ws_hpd);
spin_unlock_irq(&slock_hpd);
BASEPRINTK("hpd_status = %d\n", s5ptv_status.hpd_status);
#endif
return IRQ_HANDLED;
}
static int s5pc1xx_12s1_resume(struct snd_soc_dai *dai)
{
struct s3c_i2sv2_info *i2s = to_info(dai);
unsigned int gpio, err;
s3cdbg("Entered %s\n", __FUNCTION__);
// Configure the I2S pins : GPC[n] -> I2S1
for (gpio = S5PC1XX_GPC(0); gpio <= S5PC1XX_GPC(4); gpio++)
{
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
}
if (gpio_is_valid(S5PC1XX_GPH0(7)))
{
err = gpio_request( S5PC1XX_GPH0(7), "GPH0");
if(err)
{
s3cdbg(KERN_ERR "failed to request GPJ0 for wm8991 i2c clk..\n");
return err;
}
gpio_direction_input(S5PC1XX_GPH0(7));
s3c_gpio_setpull(S5PC1XX_GPH0(7), S3C_GPIO_PULL_UP);
if(gpio_get_value(S5PC1XX_GPH0(7))) g_current_out=WM8991_SPK;
else g_current_out=WM8991_HP;
gpio_free(S5PC1XX_GPH0(7));
}
err = request_irq(IRQ_HPJACK, odroid_hpjack_isr, IRQF_DISABLED, "hkc100-hpjack-irq", NULL);
if(err) s3cdbg("\nDEBUG -> IRQ_HPJACK request error!!!\n\n");
set_irq_type(IRQ_HPJACK, IRQ_TYPE_EDGE_FALLING);
init_timer(&detect_timer);
detect_timer.function = odroid_detect_handle;
wm8991_set_outpath(g_current_out);
clk_enable(i2s->iis_clk);
enable_irq(IRQ_HPJACK);
g_probe_done=true;
return 0;
}
static int __devinit s5p_tv_probe(struct platform_device *pdev)
{
int irq_num;
int ret;
int i,retval;
s5ptv_status.dev_fb = &pdev->dev;
//enable power
max8998_ldo3_8_control(1,LDO_TV_OUT); //ldo 3,8 on
printk("%s: LDO3_8 is enabled by TV \n", __func__);
__s5p_sdout_probe(pdev, 0);
__s5p_vp_probe(pdev, 1);
__s5p_mixer_probe(pdev, 2);
#ifdef CONFIG_CPU_S5PC100
__s5p_hdmi_probe(pdev, 3);
__s5p_tvclk_probe(pdev, 4);
#endif
#ifdef CONFIG_CPU_S5PV210
tv_clk_get(pdev, &s5ptv_status);
s5p_tv_clk_gate( true );
#endif
#ifdef CONFIG_CPU_S5PV210
__s5p_hdmi_probe(pdev, 3, 4);
__s5p_hdcp_init( );
#endif
#ifdef FIX_27M_UNSTABLE_ISSUE /* for smdkc100 pop */
writel(0x1, S5PC1XX_GPA0_BASE + 0x56c);
#endif
#ifdef I2C_BASE
/* for dev_dbg err. */
spin_lock_init(&slock_hpd);
/* for bh */
INIT_WORK(&ws_hpd, (void *)set_ddc_port);
#endif
/* check EINT init state */
#ifdef CONFIG_CPU_S5PC100
s3c_gpio_cfgpin(S5PC1XX_GPH0(5), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC1XX_GPH0(5), S3C_GPIO_PULL_UP);
s5ptv_status.hpd_status = gpio_get_value(S5PC1XX_GPH0(5))
? false:true;
#endif
#ifdef CONFIG_CPU_S5PV210
#ifdef CONFIG_HDMI_HPD
if(0 == gpio_get_value(GPIO_ACCESSORY_INT)) //docking station attached
s5ptv_status.hpd_status= s5p_hpd_get_state();
else
s5ptv_status.hpd_status= 0;
#else
s5ptv_status.hpd_status= 0;
#endif
#endif
dev_info(&pdev->dev, "hpd status is cable %s\n",
s5ptv_status.hpd_status ? "inserted":"removed");
/* interrupt */
TVOUT_IRQ_INIT(irq_num, ret, pdev, 0, out, __s5p_mixer_irq, "mixer");
TVOUT_IRQ_INIT(irq_num, ret, pdev, 1, out_hdmi_irq, __s5p_hdmi_irq , "hdmi");
TVOUT_IRQ_INIT(irq_num, ret, pdev, 2, out_tvenc_irq, s5p_tvenc_irq, "tvenc");
#ifdef CONFIG_CPU_S5PC100
TVOUT_IRQ_INIT(irq_num, ret, pdev, 3, out_hpd_irq, __s5p_hpd_irq, "hpd");
set_irq_type(IRQ_EINT5, IRQ_TYPE_LEVEL_LOW);
#endif
/* v4l2 video device registration */
for (i = 0; i < S5P_TVMAX_CTRLS; i++) {
s5ptv_status.video_dev[i] = &s5p_tvout[i];
if (video_register_device(s5ptv_status.video_dev[i],
VFL_TYPE_GRABBER, s5p_tvout[i].minor) != 0) {
dev_err(&pdev->dev,
"Couldn't register tvout driver.\n");
return 0;
}
}
#ifdef CONFIG_TV_FB
mutex_init(&s5ptv_status.fb_lock);
/* for default start up */
_s5p_tv_if_init_param();
s5ptv_status.tvout_param.disp_mode = TVOUT_720P_60;
s5ptv_status.tvout_param.out_mode = TVOUT_OUTPUT_HDMI;
#ifndef CONFIG_USER_ALLOC_TVOUT
s5p_tv_clk_gate(true);
if(s5ptv_status.tvout_param.out_mode == TVOUT_OUTPUT_HDMI || s5ptv_status.tvout_param.out_mode == TVOUT_OUTPUT_HDMI_RGB
|| s5ptv_status.tvout_param.out_mode == TVOUT_OUTPUT_DVI)
tv_phy_power(true);
_s5p_tv_if_set_disp();
#endif
s5ptvfb_set_lcd_info(&s5ptv_status);
/* prepare memory */
if (s5ptvfb_alloc_framebuffer())
goto err_alloc;
if (s5ptvfb_register_framebuffer())
goto err_alloc;
#ifndef CONFIG_USER_ALLOC_TVOUT
s5ptvfb_display_on(&s5ptv_status);
#endif
#endif
mutex_for_fo = kmalloc(sizeof(struct mutex),
GFP_KERNEL);
if (mutex_for_fo == NULL) {
dev_err(&pdev->dev,
"failed to create mutex handle\n");
goto out;
}
#ifdef I2C_BASE
mutex_for_i2c = kmalloc(sizeof(struct mutex),
GFP_KERNEL);
if (mutex_for_i2c == NULL) {
dev_err(&pdev->dev,
"failed to create mutex handle\n");
goto out;
}
mutex_init(mutex_for_i2c);
#endif
mutex_init(mutex_for_fo);
#ifdef CONFIG_CPU_S5PV210
/* added for phy cut off when boot up */
clk_enable(s5ptv_status.i2c_phy_clk);
__s5p_hdmi_phy_power(false);
clk_disable(s5ptv_status.i2c_phy_clk);
s5p_tv_clk_gate( false );
#endif
//disable power
max8998_ldo3_8_control(0,LDO_TV_OUT); //ldo 3,8 off
printk("%s: LDO3_8 is disabled by TV \n", __func__);
return 0;
#ifdef CONFIG_TV_FB
err_alloc:
#endif
#ifdef CONFIG_CPU_S5PC100
out_hpd_irq:
free_irq(IRQ_TVENC, pdev);
#endif
out_tvenc_irq:
free_irq(IRQ_HDMI, pdev);
out_hdmi_irq:
free_irq(IRQ_MIXER, pdev);
out:
printk(KERN_ERR "not found (%d). \n", ret);
return ret;
}
static int __devinit s5p_tv_probe(struct platform_device *pdev)
{
int irq_num;
int ret;
int i, retval;
/* Get csis power domain regulator */
s5ptv_status.tv_regulator = regulator_get(&pdev->dev, "pd");
if (IS_ERR(s5ptv_status.tv_regulator)) {
printk(KERN_ERR "%s %d: failed to get resource %s\n",
__func__, __LINE__, "s3c-tv20 pd");
return PTR_ERR(s5ptv_status.tv_regulator);
}
s5ptv_status.tv_tvout = regulator_get(NULL, "tvout");
if (IS_ERR(s5ptv_status.tv_tvout)) {
printk(KERN_ERR "%s %d: failed to get resource %s\n",
__func__, __LINE__, "s3c-tv20 tvout");
return PTR_ERR(s5ptv_status.tv_tvout);
}
#ifdef CONFIG_MACH_P1
s5ptv_status.tv_tv = regulator_get(NULL, "tv");
if (IS_ERR(s5ptv_status.tv_tv)) {
printk(KERN_ERR "%s %d: failed to get resource %s\n",
__func__, __LINE__, "s3c-tv20 tv");
return PTR_ERR(s5ptv_status.tv_tv);
}
regulator_enable(s5ptv_status.tv_tv);
#endif
s5ptv_status.dev_fb = &pdev->dev;
__s5p_sdout_probe(pdev, 0);
__s5p_vp_probe(pdev, 1);
__s5p_mixer_probe(pdev, 2);
#ifdef CONFIG_CPU_S5PC100
__s5p_hdmi_probe(pdev, 3);
__s5p_tvclk_probe(pdev, 4);
#endif
#ifdef CONFIG_CPU_S5PV210
tv_clk_get(pdev, &s5ptv_status);
s5p_tv_clk_gate(true);
__s5p_hdmi_probe(pdev, 3, 4);
__s5p_hdcp_init();
#endif
#if defined(CONFIG_MACH_P1)
retval = i2c_add_driver(&SII9234A_i2c_driver);
if (retval != 0)
printk(KERN_ERR "[MHL SII9234A] can't add i2c driver");
retval = i2c_add_driver(&SII9234B_i2c_driver);
if (retval != 0)
printk(KERN_ERR "[MHL SII9234B] can't add i2c driver");
retval = i2c_add_driver(&SII9234C_i2c_driver);
if (retval != 0)
printk(KERN_ERR "[MHL SII9234C] can't add i2c driver");
retval = i2c_add_driver(&SII9234_i2c_driver);
if (retval != 0)
printk(KERN_ERR "[MHL SII9234] can't add i2c driver");
#endif
#ifdef FIX_27M_UNSTABLE_ISSUE /* for smdkc100 pop */
writel(0x1, S5PC1XX_GPA0_BASE + 0x56c);
#endif
#ifdef I2C_BASE
/* for dev_dbg err. */
spin_lock_init(&slock_hpd);
/* for bh */
INIT_WORK(&ws_hpd, (void *)set_ddc_port);
#endif
/* check EINT init state */
#ifdef CONFIG_CPU_S5PC100
s3c_gpio_cfgpin(S5PC1XX_GPH0(5), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC1XX_GPH0(5), S3C_GPIO_PULL_UP);
s5ptv_status.hpd_status = gpio_get_value(S5PC1XX_GPH0(5)) ? \
false : true;
#endif
#ifdef CONFIG_CPU_S5PV210
#ifdef CONFIG_HDMI_HPD
s5ptv_status.hpd_status = 0;
#else
s5ptv_status.hpd_status = 0;
#endif
#endif
dev_info(&pdev->dev, "hpd status: cable %s\n",\
s5ptv_status.hpd_status ? "inserted":"removed/not connected");
/* Interrupt */
TVOUT_IRQ_INIT(irq_num, ret, pdev, 0, out, __s5p_mixer_irq, "mixer");
TVOUT_IRQ_INIT(irq_num, ret, pdev, 1, out_hdmi_irq, __s5p_hdmi_irq , \
"hdmi");
TVOUT_IRQ_INIT(irq_num, ret, pdev, 2, out_tvenc_irq, s5p_tvenc_irq, \
"tvenc");
#ifdef CONFIG_CPU_S5PC100
TVOUT_IRQ_INIT(irq_num, ret, pdev, 3, out_hpd_irq, __s5p_hpd_irq, \
"hpd");
set_irq_type(IRQ_EINT5, IRQ_TYPE_LEVEL_LOW);
#endif
/* v4l2 video device registration */
for (i = 0; i < S5P_TVMAX_CTRLS; i++) {
s5ptv_status.video_dev[i] = &s5p_tvout[i];
if (video_register_device(s5ptv_status.video_dev[i],
VFL_TYPE_GRABBER, s5p_tvout[i].minor) != 0) {
dev_err(&pdev->dev,
"Couldn't register tvout driver.\n");
return 0;
}
}
#ifdef CONFIG_TV_FB
mutex_init(&s5ptv_status.fb_lock);
/* for default start up */
_s5p_tv_if_init_param();
s5ptv_status.tvout_param.disp_mode = TVOUT_720P_60;
s5ptv_status.tvout_param.out_mode = TVOUT_OUTPUT_HDMI;
#ifndef CONFIG_USER_ALLOC_TVOUT
s5p_tv_clk_gate(true);
/*
if ((s5ptv_status.tvout_param.out_mode == TVOUT_OUTPUT_HDMI) ||
(s5ptv_status.tvout_param.out_mode == TVOUT_OUTPUT_HDMI_RGB))
*/
tv_phy_power(true);
_s5p_tv_if_set_disp();
#endif
s5ptvfb_set_lcd_info(&s5ptv_status);
/* prepare memory */
if (s5ptvfb_alloc_framebuffer())
goto err_alloc;
if (s5ptvfb_register_framebuffer())
goto err_alloc;
#ifndef CONFIG_USER_ALLOC_TVOUT
s5ptvfb_display_on(&s5ptv_status);
#endif
#endif
mutex_for_fo = kmalloc(sizeof(struct mutex),
GFP_KERNEL);
if (mutex_for_fo == NULL) {
dev_err(&pdev->dev,
"failed to create mutex handle\n");
goto out;
}
#ifdef I2C_BASE
mutex_for_i2c = kmalloc(sizeof(struct mutex),
GFP_KERNEL);
if (mutex_for_i2c == NULL) {
dev_err(&pdev->dev,
"failed to create mutex handle\n");
goto out;
}
mutex_init(mutex_for_i2c);
#endif
mutex_init(mutex_for_fo);
#ifdef CONFIG_CPU_S5PV210
/* added for phy cut off when boot up */
clk_enable(s5ptv_status.i2c_phy_clk);
__s5p_hdmi_phy_power(false);
clk_disable(s5ptv_status.i2c_phy_clk);
s5p_tv_clk_gate(false);
#endif
printk(KERN_INFO "%s TV Probing is done\n", __func__);
return 0;
#ifdef CONFIG_TV_FB
err_alloc:
#endif
#ifdef CONFIG_CPU_S5PC100
out_hpd_irq:
free_irq(IRQ_TVENC, pdev);
#endif
out_tvenc_irq:
free_irq(IRQ_HDMI, pdev);
out_hdmi_irq:
free_irq(IRQ_MIXER, pdev);
out:
printk(KERN_ERR "not found (%d). \n", ret);
return ret;
}
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
switch (type) {
case IRQ_TYPE_NONE:
printk(KERN_WARNING "No edge setting!\n");
break;
case IRQ_TYPE_EDGE_RISING:
newvalue = S3C2410_EXTINT_RISEEDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
newvalue = S3C2410_EXTINT_FALLEDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
newvalue = S3C2410_EXTINT_BOTHEDGE;
break;
case IRQ_TYPE_LEVEL_LOW:
newvalue = S3C2410_EXTINT_LOWLEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
newvalue = S3C2410_EXTINT_HILEV;
break;
default:
printk(KERN_ERR "No such irq type %d", type);
return -1;
}
shift = (offs & 0x7) * 4;
mask = 0x7 << shift;
#if 0
int flt_shift;
int target_offset;
flt_shift = (offs & 0x7)*8;
target_offset = flt_shift/32;
flt_shift = flt_shift%32;
ctrl = __raw_readl((S5PC1XX_EINT30FLTCON0+target_offset));
ctrl &= ~(0xff<<flt_shift);
ctrl |= (0x80 | 0x40 | 0x1) << flt_shift; //0x80:filter enable, 0x40:digital filter, 0x1: delay clocks
__raw_writel(ctrl, (S5PC1XX_EINT30FLTCON0+target_offset));
#endif
ctrl = __raw_readl(S5PC1XX_EINTCON(eint_conf_reg(irq)));
ctrl &= ~mask;
ctrl |= newvalue << shift;
__raw_writel(ctrl, S5PC1XX_EINTCON(eint_conf_reg(irq)));
#if defined(CONFIG_CPU_S5PC100)
if((0 <= offs) && (offs < 8))
s3c_gpio_cfgpin(S5PC1XX_GPH0(offs&0x7), 0x2<<((offs&0x7)*4));
else if((8 <= offs) && (offs < 16))
s3c_gpio_cfgpin(S5PC1XX_GPH1(offs&0x7), 0x2<<((offs&0x7)*4));
else if((16 <= offs) && (offs < 24))
s3c_gpio_cfgpin(S5PC1XX_GPH2(offs&0x7), 0x2<<((offs&0x7)*4));
else if((24 <= offs) && (offs < 32))
s3c_gpio_cfgpin(S5PC1XX_GPH3(offs&0x7), 0x2<<((offs&0x7)*4));
else
printk(KERN_ERR "No such irq number %d", offs);
#elif defined(CONFIG_CPU_S5PC110)
if((0 <= offs) && (offs < 8))
s3c_gpio_cfgpin(S5PC1XX_GPH0(offs&0x7), 0xf<<((offs&0x7)*4));
else if((8 <= offs) && (offs < 16))
s3c_gpio_cfgpin(S5PC1XX_GPH1(offs&0x7), 0xf<<((offs&0x7)*4));
else if((16 <= offs) && (offs < 24))
s3c_gpio_cfgpin(S5PC1XX_GPH2(offs&0x7), 0xf<<((offs&0x7)*4));
else if((24 <= offs) && (offs < 32))
s3c_gpio_cfgpin(S5PC1XX_GPH3(offs&0x7), 0xf<<((offs&0x7)*4));
else
printk(KERN_ERR "No such irq number %d", offs);
#endif
return 0;
}
