void FPhysScene::SetUpForFrame(const FVector* NewGrav, float InDeltaSeconds, float InMaxPhysicsDeltaTime)
{
DeltaSeconds = InDeltaSeconds;
MaxPhysicsDeltaTime = InMaxPhysicsDeltaTime;
#if WITH_PHYSX
if (NewGrav)
{
// Loop through scene types to get all scenes
for (uint32 SceneType = 0; SceneType < NumPhysScenes; ++SceneType)
{
PxScene* PScene = GetPhysXScene(SceneType);
if (PScene != NULL)
{
//@todo phys_thread don't do this if gravity changes
//@todo, to me it looks like we should avoid this if the gravity has not changed, the lock is probably expensive
// Lock scene lock, in case it is required
SCENE_LOCK_WRITE(PScene);
PScene->setGravity(U2PVector(*NewGrav));
// Unlock scene lock, in case it is required
SCENE_UNLOCK_WRITE(PScene);
}
}
}
#endif
}
void FPhysSubstepTask::SubstepInterpolation(float InAlpha)
{
#if WITH_PHYSX
#if WITH_APEX
PxScene * PScene = PAScene->getPhysXScene();
#else
PxScene * PScene = PAScene;
#endif
PhysTargetMap & Targets = PhysTargetBuffers[!External];
/** Note: We lock the entire scene before iterating. The assumption is that removing an FBodyInstance from the map will also be wrapped by this lock */
SCENE_LOCK_WRITE(PScene);
for (PhysTargetMap::TIterator Itr = Targets.CreateIterator(); Itr; ++Itr)
{
FPhysTarget & PhysTarget = Itr.Value();
FBodyInstance* BodyInstance = Itr.Key();
PxRigidDynamic * PRigidDynamic = BodyInstance->GetPxRigidDynamic();
if (PRigidDynamic == NULL)
{
continue;
}
//We should only be iterating over actors that belong to this scene
check(PRigidDynamic->getScene() == PScene);
ApplyForces(PhysTarget, BodyInstance);
ApplyTorques(PhysTarget, BodyInstance);
InterpolateKinematicActor(PhysTarget, BodyInstance, InAlpha);
}
/** Final substep */
if (InAlpha >= 1.f)
{
Targets.Empty(Targets.Num());
}
SCENE_UNLOCK_WRITE(PScene);
#endif
}
void FPhysScene::ApplyWorldOffset(FVector InOffset)
{
#if WITH_PHYSX
// Loop through scene types to get all scenes
for (uint32 SceneType = 0; SceneType < NumPhysScenes; ++SceneType)
{
PxScene* PScene = GetPhysXScene(SceneType);
if (PScene != NULL)
{
// Lock scene lock, in case it is required
SCENE_LOCK_WRITE(PScene);
PScene->shiftOrigin(U2PVector(-InOffset));
// Unlock scene lock, in case it is required
SCENE_UNLOCK_WRITE(PScene);
}
}
#endif
}
void FPhysScene::SetIsStaticLoading(bool bStaticLoading)
{
#if WITH_PHYSX
// Loop through scene types to get all scenes
for (uint32 SceneType = 0; SceneType < NumPhysScenes; ++SceneType)
{
PxScene* PScene = GetPhysXScene(SceneType);
if (PScene != NULL)
{
// Lock scene lock, in case it is required
SCENE_LOCK_WRITE(PScene);
// Sets the rebuild rate hint, to 1 frame if static loading
PScene->setDynamicTreeRebuildRateHint(bStaticLoading ? 5 : PhysXSlowRebuildRate);
// Unlock scene lock, in case it is required
SCENE_UNLOCK_WRITE(PScene);
}
}
#endif
}
void FPhysScene::InitPhysScene(uint32 SceneType)
{
check(SceneType < NumPhysScenes);
#if WITH_PHYSX
PhysxUserData = FPhysxUserData(this);
// Include scene descriptor in loop, so that we might vary it with scene type
PxSceneDesc PSceneDesc(GPhysXSDK->getTolerancesScale());
PSceneDesc.cpuDispatcher = CPUDispatcher;
FPhysSceneShaderInfo PhysSceneShaderInfo;
PhysSceneShaderInfo.PhysScene = this;
PSceneDesc.filterShaderData = &PhysSceneShaderInfo;
PSceneDesc.filterShaderDataSize = sizeof(PhysSceneShaderInfo);
PSceneDesc.filterShader = PhysXSimFilterShader;
PSceneDesc.simulationEventCallback = SimEventCallback;
if(UPhysicsSettings::Get()->bEnablePCM)
{
PSceneDesc.flags |= PxSceneFlag::eENABLE_PCM;
}
//LOC_MOD enable kinematic vs kinematic for APEX destructibles. This is for the kinematic cube moving horizontally in QA-Destructible map to collide with the destructible.
// Was this flag turned off in UE4? Do we want to turn it on for both sync and async scenes?
PSceneDesc.flags |= PxSceneFlag::eENABLE_KINEMATIC_PAIRS;
// Set bounce threshold
PSceneDesc.bounceThresholdVelocity = UPhysicsSettings::Get()->BounceThresholdVelocity;
// Possibly set flags in async scene for better behavior with piles
#if USE_ADAPTIVE_FORCES_FOR_ASYNC_SCENE
if (SceneType == PST_Async)
{
PSceneDesc.flags |= PxSceneFlag::eADAPTIVE_FORCE;
}
#endif
#if USE_SPECIAL_FRICTION_MODEL_FOR_ASYNC_SCENE
if (SceneType == PST_Async)
{
PSceneDesc.flags |= PxSceneFlag::eENABLE_ONE_DIRECTIONAL_FRICTION;
}
#endif
// If we're frame lagging the async scene (truly running it async) then use the scene lock
#if USE_SCENE_LOCK
if(UPhysicsSettings::Get()->bWarnMissingLocks)
{
PSceneDesc.flags |= PxSceneFlag::eREQUIRE_RW_LOCK;
}
#endif
// We want to use 'active transforms'
PSceneDesc.flags |= PxSceneFlag::eENABLE_ACTIVETRANSFORMS;
// @TODO Should we set up PSceneDesc.limits? How?
// Do this to improve loading times, esp. for streaming in sublevels
PSceneDesc.staticStructure = PxPruningStructure::eDYNAMIC_AABB_TREE;
// Default to rebuilding tree slowly
PSceneDesc.dynamicTreeRebuildRateHint = PhysXSlowRebuildRate;
bool bIsValid = PSceneDesc.isValid();
if (!bIsValid)
{
UE_LOG(LogPhysics, Log, TEXT("Invalid PSceneDesc"));
}
// Create scene, and add to map
PxScene* PScene = GPhysXSDK->createScene(PSceneDesc);
#if WITH_APEX
// Build the APEX scene descriptor for the PhysX scene
NxApexSceneDesc ApexSceneDesc;
ApexSceneDesc.scene = PScene;
// This interface allows us to modify the PhysX simulation filter shader data with contact pair flags
ApexSceneDesc.physX3Interface = &GApexPhysX3Interface;
// Create the APEX scene from our descriptor
NxApexScene* ApexScene = GApexSDK->createScene(ApexSceneDesc);
// This enables debug rendering using the "legacy" method, not using the APEX render API
ApexScene->setUseDebugRenderable(true);
// Allocate a view matrix for APEX scene LOD
ApexScene->allocViewMatrix(physx::ViewMatrixType::LOOK_AT_RH);
// Add the APEX scene to the map instead of the PhysX scene, since we can access the latter through the former
GPhysXSceneMap.Add(PhysXSceneCount, ApexScene);
#else // #if WITH_APEX
GPhysXSceneMap.Add(PhysXSceneCount, PScene);
#endif // #if WITH_APEX
// Lock scene lock, in case it is required
SCENE_LOCK_WRITE(PScene);
// enable CCD at scene level
if (bGlobalCCD)
{
PScene->setFlag(PxSceneFlag::eENABLE_CCD, true);
}
// Need to turn this on to consider kinematics turning into dynamic. Otherwise, you'll need to call resetFiltering to do the expensive broadphase reinserting
PScene->setFlag(PxSceneFlag::eENABLE_KINEMATIC_STATIC_PAIRS, true);
// Unlock scene lock, in case it is required
SCENE_UNLOCK_WRITE(PScene);
// Save pointer to FPhysScene in userdata
PScene->userData = &PhysxUserData;
#if WITH_APEX
ApexScene->userData = &PhysxUserData;
#endif
// Store index of PhysX Scene in this FPhysScene
this->PhysXSceneIndex[SceneType] = PhysXSceneCount;
DeferredSceneData[SceneType].SceneIndex = PhysXSceneCount;
// Increment scene count
PhysXSceneCount++;
#if WITH_VEHICLE
// Only create PhysXVehicleManager in the sync scene
if (SceneType == PST_Sync)
{
check(VehicleManager == NULL);
VehicleManager = new FPhysXVehicleManager(PScene);
}
#endif
#if WITH_SUBSTEPPING
//Initialize substeppers
//we don't bother sub-stepping cloth
#if WITH_PHYSX
#if WITH_APEX
PhysSubSteppers[SceneType] = SceneType == PST_Cloth ? NULL : new FPhysSubstepTask(ApexScene);
#else
PhysSubSteppers[SceneType] = SceneType == PST_Cloth ? NULL : new FPhysSubstepTask(PScene);
#endif
#endif
#if WITH_VEHICLE
if (SceneType == PST_Sync)
{
PhysSubSteppers[SceneType]->SetVehicleManager(VehicleManager);
}
#endif
#endif
#endif // WITH_PHYSX
}