static void Test_WritePoints( int nSHPType, const char *pszFilename )
{
SHPHandle hSHPHandle;
SHPObject *psShape;
double x, y, z, m;
hSHPHandle = SHPCreate( pszFilename, nSHPType );
x = 1.0;
y = 2.0;
z = 3.0;
m = 4.0;
psShape = SHPCreateObject( nSHPType, -1, 0, NULL, NULL,
1, &x, &y, &z, &m );
SHPWriteObject( hSHPHandle, -1, psShape );
SHPDestroyObject( psShape );
x = 10.0;
y = 20.0;
z = 30.0;
m = 40.0;
psShape = SHPCreateObject( nSHPType, -1, 0, NULL, NULL,
1, &x, &y, &z, &m );
SHPWriteObject( hSHPHandle, -1, psShape );
SHPDestroyObject( psShape );
SHPClose( hSHPHandle );
}
static void Test_WriteMultiPoints( int nSHPType, const char *pszFilename )
{
SHPHandle hSHPHandle;
SHPObject *psShape;
double x[4], y[4], z[4], m[4];
int i, iShape;
hSHPHandle = SHPCreate( pszFilename, nSHPType );
for( iShape = 0; iShape < 3; iShape++ )
{
for( i = 0; i < 4; i++ )
{
x[i] = iShape * 10 + i + 1.15;
y[i] = iShape * 10 + i + 2.25;
z[i] = iShape * 10 + i + 3.35;
m[i] = iShape * 10 + i + 4.45;
}
psShape = SHPCreateObject( nSHPType, -1, 0, NULL, NULL,
4, x, y, z, m );
SHPWriteObject( hSHPHandle, -1, psShape );
SHPDestroyObject( psShape );
}
SHPClose( hSHPHandle );
}
void Builder::addPoint( const DL_PointData& data )
{
if ( shapefileType != SHPT_POINT )
{
QgsDebugMsg( "ignoring point" );
return;
}
QgsDebugMsg( QString( "point (%1,%2,%3)" ).arg( data.x ).arg( data.y ).arg( data.z ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping point in block." );
return;
}
double x = data.x + currentBlockX;
double y = data.y + currentBlockY;
double z = data.z;
SHPObject *psObject;
psObject = SHPCreateObject( shapefileType, fetchedprims, 0, NULL, NULL, 1, &x, &y, &z, NULL );
shpObjects.push_back( psObject );
fetchedprims++;
}
void Builder::FinalizeAnyPolyline()
{
// Save the last polyline / polygon if one exists.
if ( current_polyline_pointcount > 0 )
{
if ( current_polyline_willclose )
{
polyVertex << DL_VertexData( closePolyX, closePolyY, closePolyZ );
}
int dim = polyVertex.size();
QVector<double> xv( dim );
QVector<double> yv( dim );
QVector<double> zv( dim );
for ( int i = 0; i < dim; i++ )
{
xv[i] = polyVertex[i].x;
yv[i] = polyVertex[i].y;
zv[i] = polyVertex[i].z;
}
shpObjects << SHPCreateObject( shapefileType, shpObjects.size(), 0, NULL, NULL, dim, xv.data(), yv.data(), zv.data(), NULL );
polyVertex.clear();
QgsDebugMsg( QString( "Finalized adding of polyline shape %1" ).arg( shpObjects.size() - 1 ) );
current_polyline_pointcount = 0;
}
}
// ---------------------------------------------------------------------------
//
// -----------
SHPObject* bSHPTable::vxs2shape(int o, ivertices* vxs){
int count;
int ptype;
double bmin[4],bmax[4];
SHPObject* obj;
SHPGetInfo(_shp,&count,&ptype,bmin,bmax);
if(ptype==SHPT_NULL){
obj=SHPCreateSimpleObject(ptype,0,NULL,NULL,NULL);
}
else{
double* x=(double*)malloc(ivs_n_vxs(vxs)*sizeof(double));
double* y=(double*)malloc(ivs_n_vxs(vxs)*sizeof(double));
int np=(ivs_n_parts(vxs)>1)?ivs_n_parts(vxs):0;
int* p=(ivs_n_parts(vxs)>1)?(int*)malloc(ivs_n_parts(vxs)*sizeof(int)):NULL;
int* pt=(ivs_n_parts(vxs)>1)?(int*)malloc(ivs_n_parts(vxs)*sizeof(int)):NULL;
dvertices* dvxs=NULL;
vxs_i2d(&dvxs,vxs,_reso);
dvs_move(dvxs,_ox,_oy);
transform_a2t(dvxs);
if(p){
memmove(p,vxs->offs,vxs->no*sizeof(int));
memset(pt,SHPP_RING,vxs->no*sizeof(int));
}
for(int i=0;i<ivs_n_vxs(vxs);i++){
x[i]=dvxs->vx.vx2[i].x;
y[i]=dvxs->vx.vx2[i].y;
}
dvs_free(dvxs);
obj=SHPCreateObject(ptype,o-1,np,p,pt,ivs_n_vxs(vxs),x,y,NULL,NULL);
}
return(obj);
}
void Builder::addLine( const DL_LineData& data )
{
//data.x1, data.y1, data.z1
//data.x2, data.y2, data.z2
if ( shapefileType != SHPT_ARC )
{
QgsDebugMsg( "ignoring line" );
return;
}
QgsDebugMsg( QString( "line %1,%2,%3 %4,%5,%6" )
.arg( data.x1 ).arg( data.y1 ).arg( data.z1 )
.arg( data.x2 ).arg( data.y2 ).arg( data.z2 ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping line in block." );
return;
}
double xv[2] = { data.x1, data.x2 };
double yv[2] = { data.y1, data.y2 };
double zv[2] = { data.z1, data.z2 };
shpObjects << SHPCreateObject( shapefileType, shpObjects.size(), 0, NULL, NULL, 2, xv, yv, zv, NULL );
}
// Returns: index in shapefile
inline int AddShape(Geometry const& geometry)
{
// Note: we MIGHT design a small wrapper class which destroys in destructor
::SHPObject* obj = SHPCreateObject(geometry);
int result = SHPWriteObject(m_shp, -1, obj );
::SHPDestroyObject( obj );
return result;
}
void Builder::addCircle( const DL_CircleData& data )
{
if ( shapefileType != SHPT_ARC && shapefileType != SHPT_POLYGON )
{
QgsDebugMsg( "ignoring circle" );
return;
}
QgsDebugMsg( QString( "circle (%1,%2,%3 r=%4)" ).arg( data.cx ).arg( data.cy ).arg( data.cz ).arg( data.radius ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping circle in block" );
return;
}
std::vector <DL_PointData> circlePoints;
DL_PointData myPoint;
// Approximate the circle with 360 line segments connecting points along that circle
register long shpIndex = 0;
for ( double i = 0.0; i <= 2*M_PI; i += M_PI / 180.0, shpIndex++ )
{
myPoint.x = data.radius * cos( i ) + data.cx + currentBlockX;
myPoint.y = data.radius * sin( i ) + data.cy + currentBlockY;
myPoint.z = data.cz;
circlePoints.push_back( myPoint );
}
SHPObject *psShape;
int dim = circlePoints.size();
double *xv = new double[dim];
double *yv = new double[dim];
double *zv = new double[dim];
for ( int i = 0; i < dim; i++ )
{
xv[i] = circlePoints[i].x;
yv[i] = circlePoints[i].y;
zv[i] = circlePoints[i].z;
}
psShape = SHPCreateObject( shapefileType, fetchedprims, 0, NULL, NULL, dim, xv, yv, zv, NULL );
delete [] xv;
delete [] yv;
delete [] zv;
shpObjects.push_back( psShape );
fetchedprims++;
circlePoints.clear();
}
void Builder::addCircle( const DL_CircleData& data )
{
if ( shapefileType != SHPT_ARC && shapefileType != SHPT_POLYGON )
{
QgsDebugMsg( "ignoring circle" );
return;
}
QgsDebugMsg( QString( "circle (%1,%2,%3 r=%4)" ).arg( data.cx ).arg( data.cy ).arg( data.cz ).arg( data.radius ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping circle in block" );
return;
}
std::vector <DL_PointData> circlePoints;
DL_PointData myPoint;
// Approximate the circle with 360 line segments connecting points along that circle
long shpIndex = 0;
for ( double i = 0.0; i <= 2*M_PI; i += M_PI / 180.0, shpIndex++ )
{
myPoint.x = data.radius * cos( i ) + data.cx;
myPoint.y = data.radius * sin( i ) + data.cy;
myPoint.z = data.cz;
circlePoints.push_back( myPoint );
}
int dim = circlePoints.size();
QVector<double> xv( dim );
QVector<double> yv( dim );
QVector<double> zv( dim );
for ( int i = 0; i < dim; i++ )
{
xv[i] = circlePoints[i].x;
yv[i] = circlePoints[i].y;
zv[i] = circlePoints[i].z;
}
shpObjects << SHPCreateObject( shapefileType, shpObjects.size(), 0, NULL, NULL, dim, xv.data(), yv.data(), zv.data(), NULL );
circlePoints.clear();
}
void Builder::FinalizeAnyPolyline()
{
// Save the last polyline / polygon if one exists.
if ( current_polyline_pointcount > 0 )
{
if ( current_polyline_willclose )
{
DL_VertexData myVertex;
myVertex.x = closePolyX;
myVertex.y = closePolyY;
myVertex.z = closePolyZ;
polyVertex.push_back( myVertex );
}
SHPObject *psObject;
int dim = polyVertex.size();
double *xv = new double[dim];
double *yv = new double[dim];
double *zv = new double[dim];
for ( int i = 0; i < dim; i++ )
{
xv[i] = polyVertex[i].x;
yv[i] = polyVertex[i].y;
zv[i] = polyVertex[i].z;
}
psObject = SHPCreateObject( shapefileType, fetchedprims, 0, NULL, NULL, dim, xv, yv, zv, NULL );
delete [] xv;
delete [] yv;
delete [] zv;
shpObjects.push_back( psObject );
polyVertex.clear();
fetchedprims++;
QgsDebugMsg( QString( "Finalized adding of polyline shape %1" ).arg( fetchedprims - 1 ) );
current_polyline_pointcount = 0;
}
}
void Builder::addPoint( const DL_PointData& data )
{
if ( shapefileType != SHPT_POINT )
{
QgsDebugMsg( "ignoring point" );
return;
}
QgsDebugMsg( QString( "point (%1,%2,%3)" ).arg( data.x ).arg( data.y ).arg( data.z ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping point in block." );
return;
}
double x = data.x, y = data.y, z = data.z;
shpObjects << SHPCreateObject( shapefileType, shpObjects.size(), 0, NULL, NULL, 1, &x, &y, &z, NULL );
}
void surfaceVectorField::WriteShapePoint(double xpt, double ypt, double spd, long dir, long view_dir, long map_dir)
{
long NumRecord;
double zpt=0;
SHPObject *pSHP;
pSHP=SHPCreateObject(SHPT_POINT, -1, 0, NULL, NULL, 1, &xpt, &ypt, &zpt, NULL);
SHPWriteObject(hSHP, -1, pSHP);
SHPDestroyObject(pSHP);
NumRecord = DBFGetRecordCount(hDBF);
// DBFWriteDoubleAttribute(hDBF, NumRecord, 0, xpt);
// DBFWriteDoubleAttribute(hDBF, NumRecord, 1, ypt);
// DBFWriteIntegerAttribute(hDBF, NumRecord, 2, spd);
// DBFWriteIntegerAttribute(hDBF, NumRecord, 3, dir);
DBFWriteDoubleAttribute(hDBF, NumRecord, 0, spd);
DBFWriteIntegerAttribute(hDBF, NumRecord, 1, dir);
DBFWriteIntegerAttribute(hDBF, NumRecord, 2, view_dir);
DBFWriteIntegerAttribute(hDBF, NumRecord, 3, map_dir);
}
void Builder::addLine( const DL_LineData& data )
{
//data.x1, data.y1, data.z1
//data.x2, data.y2, data.z2
if ( shapefileType != SHPT_ARC )
{
QgsDebugMsg( "ignoring line" );
return;
}
QgsDebugMsg( QString( "line %1,%2,%3 %4,%5,%6" )
.arg( data.x1 ).arg( data.y1 ).arg( data.z1 )
.arg( data.x2 ).arg( data.y2 ).arg( data.z2 ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping line in block." );
return;
}
double xv[2], yv[2], zv[2];
xv[0] = data.x1 + currentBlockX;
yv[0] = data.y1 + currentBlockY;
zv[0] = data.z1;
xv[1] = data.x2 + currentBlockX;
yv[1] = data.y2 + currentBlockY;
zv[1] = data.z2;
SHPObject *psObject;
psObject = SHPCreateObject( shapefileType, fetchedprims, 0, NULL, NULL, 2, xv, yv, zv, NULL );
shpObjects.push_back( psObject );
fetchedprims++;
}
void Builder::print_shpObjects()
{
int dim = shpObjects.size();
int dimTexts = textObjects.size();
QgsDebugMsg( QString( "Number of primitives: %1" ).arg( dim ) );
QgsDebugMsg( QString( "Number of text fields: %1" ).arg( dimTexts ) );
SHPHandle hSHP;
if ( fname.substr( fname.length() - 4 ).compare( ".shp" ) == 0 )
{
outputdbf = fname;
outputdbf = outputdbf.replace(( outputdbf.length() - 3 ), outputdbf.length(), "dbf" );
outputshp = fname;
outputshp = outputshp.replace(( outputshp.length() - 3 ), outputshp.length(), "shp" );
outputtdbf = fname;
outputtdbf = outputtdbf.replace(( outputtdbf.length() - 4 ), outputtdbf.length(), "_texts.dbf" );
outputtshp = fname;
outputtshp = outputtshp.replace(( outputtshp.length() - 4 ), outputtshp.length(), "_texts.shp" );
}
else
{
outputdbf = outputtdbf = fname + ".dbf";
outputshp = outputtshp = fname + ".shp";
}
DBFHandle dbffile = DBFCreate( outputdbf.c_str() );
DBFAddField( dbffile, "myid", FTInteger, 10, 0 );
hSHP = SHPCreate( outputshp.c_str(), shapefileType );
QgsDebugMsg( "Writing to main shp file..." );
for ( int i = 0; i < dim; i++ )
{
SHPWriteObject( hSHP, -1, shpObjects[i] );
SHPDestroyObject( shpObjects[i] );
DBFWriteIntegerAttribute( dbffile, i, 0, i );
}
SHPClose( hSHP );
DBFClose( dbffile );
QgsDebugMsg( "Done!" );
if ( convertText && dimTexts > 0 )
{
SHPHandle thSHP;
DBFHandle Tdbffile = DBFCreate( outputtdbf.c_str() );
thSHP = SHPCreate( outputtshp.c_str(), SHPT_POINT );
DBFAddField( Tdbffile, "tipx", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tipy", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tipz", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tapx", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tapy", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tapz", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "height", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "scale", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "flags", FTInteger, 10, 0 );
DBFAddField( Tdbffile, "hjust", FTInteger, 10, 0 );
DBFAddField( Tdbffile, "vjust", FTInteger, 10, 0 );
DBFAddField( Tdbffile, "text", FTString, 50, 0 );
DBFAddField( Tdbffile, "style", FTString, 50, 0 );
DBFAddField( Tdbffile, "angle", FTDouble, 20, 10 );
QgsDebugMsg( "Writing Texts' shp File..." );
for ( int i = 0; i < dimTexts; i++ )
{
SHPObject *psObject;
double x = textObjects[i].ipx;
double y = textObjects[i].ipy;
double z = textObjects[i].ipz;
psObject = SHPCreateObject( SHPT_POINT, i, 0, NULL, NULL, 1, &x, &y, &z, NULL );
SHPWriteObject( thSHP, -1, psObject );
DBFWriteDoubleAttribute( Tdbffile, i, 0, textObjects[i].ipx );
DBFWriteDoubleAttribute( Tdbffile, i, 1, textObjects[i].ipy );
DBFWriteDoubleAttribute( Tdbffile, i, 2, textObjects[i].ipz );
DBFWriteDoubleAttribute( Tdbffile, i, 3, textObjects[i].apx );
DBFWriteDoubleAttribute( Tdbffile, i, 4, textObjects[i].apy );
DBFWriteDoubleAttribute( Tdbffile, i, 5, textObjects[i].apz );
DBFWriteDoubleAttribute( Tdbffile, i, 6, textObjects[i].height );
DBFWriteDoubleAttribute( Tdbffile, i, 7, textObjects[i].xScaleFactor );
DBFWriteIntegerAttribute( Tdbffile, i, 8, textObjects[i].textGenerationFlags );
DBFWriteIntegerAttribute( Tdbffile, i, 9, textObjects[i].hJustification );
DBFWriteIntegerAttribute( Tdbffile, i, 10, textObjects[i].vJustification );
DBFWriteStringAttribute( Tdbffile, i, 11, textObjects[i].text.c_str() );
DBFWriteStringAttribute( Tdbffile, i, 12, textObjects[i].style.c_str() );
DBFWriteDoubleAttribute( Tdbffile, i, 13, textObjects[i].angle );
SHPDestroyObject( psObject );
}
SHPClose( thSHP );
DBFClose( Tdbffile );
QgsDebugMsg( "Done!" );
}
}
void Builder::addArc( const DL_ArcData& data )
{
if ( shapefileType != SHPT_ARC )
{
QgsDebugMsg( "ignoring arc" );
return;
}
int fromAngle = ( int ) data.angle1 + 1;
int toAngle = ( int ) data.angle2 + 1;
QgsDebugMsg( QString( "arc (%1,%2,%3 r=%4 a1=%5 a2=%6)" )
.arg( data.cx ).arg( data.cy ).arg( data.cz )
.arg( data.radius )
.arg( data.angle1 ).arg( data.angle2 ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping arc in block" );
return;
}
int i = 0;
long shpIndex = 0;
// Approximate the arc
double radianMeasure;
std::vector <DL_PointData> arcPoints;
DL_PointData myPoint;
for ( i = fromAngle; ; i++, shpIndex++ )
{
if ( i > 360 )
i = 0;
if ( shpIndex > 1000 )
break;
radianMeasure = i * M_PI / 180.0;
myPoint.x = data.radius * cos( radianMeasure ) + data.cx;
myPoint.y = data.radius * sin( radianMeasure ) + data.cy;
myPoint.z = data.cz;
arcPoints.push_back( myPoint );
if ( i == toAngle )
break;
}
// Finalize
int dim = arcPoints.size();
QVector<double> xv( dim );
QVector<double> yv( dim );
QVector<double> zv( dim );
for ( int i = 0; i < dim; i++ )
{
xv[i] = arcPoints[i].x;
yv[i] = arcPoints[i].y;
zv[i] = arcPoints[i].z;
}
shpObjects << SHPCreateObject( shapefileType, shpObjects.size(), 0, NULL, NULL, dim, xv.data(), yv.data(), zv.data(), NULL );
arcPoints.clear();
}
void Builder::addPolyline( const DL_PolylineData& data )
{
if ( shapefileType != SHPT_ARC && shapefileType != SHPT_POLYGON )
{
QgsDebugMsg( "ignoring polyline" );
return;
}
QgsDebugMsg( "reading polyline - expecting vertices" );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping polyline in block" );
return;
}
// Add previously created polyline if not finalized yet
if ( current_polyline_pointcount > 0 )
{
if ( current_polyline_willclose )
{
DL_VertexData myVertex;
myVertex.x = closePolyX;
myVertex.y = closePolyY;
myVertex.z = closePolyZ;
polyVertex.push_back( myVertex );
}
int dim = polyVertex.size();
QVector<double> xv( dim );
QVector<double> yv( dim );
QVector<double> zv( dim );
for ( int i = 0; i < dim; i++ )
{
xv[i] = polyVertex[i].x;
yv[i] = polyVertex[i].y;
zv[i] = polyVertex[i].z;
}
shpObjects << SHPCreateObject( shapefileType, shpObjects.size(), 0, NULL, NULL, dim, xv.data(), yv.data(), zv.data(), NULL );
polyVertex.clear();
QgsDebugMsg( QString( "polyline prepared: %1" ).arg( shpObjects.size() - 1 ) );
current_polyline_pointcount = 0;
}
// Now that the currently-adding polyline (if any) is
// finalized, parse out the flag options
if ( data.flags == 1 || data.flags == 32 )
{
current_polyline_willclose = true;
store_next_vertex_for_polyline_close = true;
}
else
{
current_polyline_willclose = false;
store_next_vertex_for_polyline_close = false;
}
current_polyline_pointcount = 0;
}
static void WritePolygonShapefile( const char * pszShapefile,
SDTSTransfer * poTransfer,
const char * pszMODN )
{
SDTSPolygonReader *poPolyReader;
/* -------------------------------------------------------------------- */
/* Fetch a reference to the indexed polygon reader. */
/* -------------------------------------------------------------------- */
poPolyReader = (SDTSPolygonReader *)
poTransfer->GetLayerIndexedReader( poTransfer->FindLayer( pszMODN ) );
if( poPolyReader == NULL )
{
fprintf( stderr, "Failed to open %s.\n",
poTransfer->GetCATD()->GetModuleFilePath( pszMODN ) );
return;
}
/* -------------------------------------------------------------------- */
/* Assemble polygon geometries from all the line layers. */
/* -------------------------------------------------------------------- */
poPolyReader->AssembleRings( poTransfer, poTransfer->FindLayer(pszMODN) );
/* -------------------------------------------------------------------- */
/* Create the Shapefile. */
/* -------------------------------------------------------------------- */
SHPHandle hSHP;
hSHP = SHPCreate( pszShapefile, SHPT_POLYGON );
if( hSHP == NULL )
{
fprintf( stderr, "Unable to create shapefile `%s'\n",
pszShapefile );
return;
}
/* -------------------------------------------------------------------- */
/* Create the database file, and our basic set of attributes. */
/* -------------------------------------------------------------------- */
DBFHandle hDBF;
int nSDTSRecordField;
char szDBFFilename[1024];
sprintf( szDBFFilename, "%s.dbf", pszShapefile );
hDBF = DBFCreate( szDBFFilename );
if( hDBF == NULL )
{
fprintf( stderr, "Unable to create shapefile .dbf for `%s'\n",
pszShapefile );
return;
}
nSDTSRecordField = DBFAddField( hDBF, "SDTSRecId", FTInteger, 8, 0 );
char **papszModRefs = poPolyReader->ScanModuleReferences();
AddPrimaryAttrToDBFSchema( hDBF, poTransfer, papszModRefs );
CSLDestroy( papszModRefs );
/* ==================================================================== */
/* Process all the polygon features in the module. */
/* ==================================================================== */
SDTSRawPolygon *poRawPoly;
poPolyReader->Rewind();
while( (poRawPoly = (SDTSRawPolygon *) poPolyReader->GetNextFeature())
!= NULL )
{
int iShape;
/* -------------------------------------------------------------------- */
/* Write out a shape with the vertices. */
/* -------------------------------------------------------------------- */
SHPObject *psShape;
psShape = SHPCreateObject( SHPT_POLYGON, -1, poRawPoly->nRings,
poRawPoly->panRingStart, NULL,
poRawPoly->nVertices,
poRawPoly->padfX,
poRawPoly->padfY,
poRawPoly->padfZ,
NULL );
iShape = SHPWriteObject( hSHP, -1, psShape );
SHPDestroyObject( psShape );
/* -------------------------------------------------------------------- */
/* Write out the attributes. */
/* -------------------------------------------------------------------- */
DBFWriteIntegerAttribute( hDBF, iShape, nSDTSRecordField,
poRawPoly->oModId.nRecord );
WritePrimaryAttrToDBF( hDBF, iShape, poTransfer, poRawPoly );
if( !poPolyReader->IsIndexed() )
delete poRawPoly;
}
/* -------------------------------------------------------------------- */
/* Close, and cleanup. */
/* -------------------------------------------------------------------- */
DBFClose( hDBF );
SHPClose( hSHP );
}
void Builder::addPolyline( const DL_PolylineData& data )
{
if ( shapefileType != SHPT_ARC && shapefileType != SHPT_POLYGON )
{
QgsDebugMsg( "ignoring polyline" );
return;
}
QgsDebugMsg( "reading polyline - expecting vertices" );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping polyline in block" );
return;
}
// Add previously created polyline if not finalized yet
if ( current_polyline_pointcount > 0 )
{
if ( current_polyline_willclose )
{
DL_VertexData myVertex;
myVertex.x = closePolyX;
myVertex.y = closePolyY;
myVertex.z = closePolyZ;
polyVertex.push_back( myVertex );
}
SHPObject *psShape;
int dim = polyVertex.size();
double *xv = new double[dim];
double *yv = new double[dim];
double *zv = new double[dim];
for ( int i = 0; i < dim; i++ )
{
xv[i] = polyVertex[i].x;
yv[i] = polyVertex[i].y;
zv[i] = polyVertex[i].z;
}
psShape = SHPCreateObject( shapefileType, fetchedprims, 0, NULL, NULL, dim, xv, yv, zv, NULL );
delete [] xv;
delete [] yv;
delete [] zv;
shpObjects.push_back( psShape );
fetchedprims++;
polyVertex.clear();
QgsDebugMsg( QString( "polyline prepared: %1" ).arg( fetchedprims - 1 ) );
current_polyline_pointcount = 0;
}
// Now that the currently-adding polyline (if any) is
// finalized, parse out the flag options
if ( data.flags == 1 || data.flags == 32 )
{
current_polyline_willclose = true;
store_next_vertex_for_polyline_close = true;
}
else
{
current_polyline_willclose = false;
store_next_vertex_for_polyline_close = false;
}
current_polyline_pointcount = 0;
}
static void Test_WriteArcPoly( int nSHPType, const char *pszFilename )
{
SHPHandle hSHPHandle;
SHPObject *psShape;
double x[100], y[100], z[100], m[100];
int anPartStart[100];
int anPartType[100], *panPartType;
int i, iShape;
hSHPHandle = SHPCreate( pszFilename, nSHPType );
if( nSHPType == SHPT_MULTIPATCH )
panPartType = anPartType;
else
panPartType = NULL;
for( iShape = 0; iShape < 3; iShape++ )
{
x[0] = 1.0;
y[0] = 1.0+iShape*3;
x[1] = 2.0;
y[1] = 1.0+iShape*3;
x[2] = 2.0;
y[2] = 2.0+iShape*3;
x[3] = 1.0;
y[3] = 2.0+iShape*3;
x[4] = 1.0;
y[4] = 1.0+iShape*3;
for( i = 0; i < 5; i++ )
{
z[i] = iShape * 10 + i + 3.35;
m[i] = iShape * 10 + i + 4.45;
}
psShape = SHPCreateObject( nSHPType, -1, 0, NULL, NULL,
5, x, y, z, m );
SHPWriteObject( hSHPHandle, -1, psShape );
SHPDestroyObject( psShape );
}
/* -------------------------------------------------------------------- */
/* Do a multi part polygon (shape). We close it, and have two */
/* inner rings. */
/* -------------------------------------------------------------------- */
x[0] = 0.0;
y[0] = 0.0;
x[1] = 0;
y[1] = 100;
x[2] = 100;
y[2] = 100;
x[3] = 100;
y[3] = 0;
x[4] = 0;
y[4] = 0;
x[5] = 10;
y[5] = 20;
x[6] = 30;
y[6] = 20;
x[7] = 30;
y[7] = 40;
x[8] = 10;
y[8] = 40;
x[9] = 10;
y[9] = 20;
x[10] = 60;
y[10] = 20;
x[11] = 90;
y[11] = 20;
x[12] = 90;
y[12] = 40;
x[13] = 60;
y[13] = 40;
x[14] = 60;
y[14] = 20;
for( i = 0; i < 15; i++ )
{
z[i] = i;
m[i] = i*2;
}
anPartStart[0] = 0;
anPartStart[1] = 5;
anPartStart[2] = 10;
anPartType[0] = SHPP_RING;
anPartType[1] = SHPP_INNERRING;
anPartType[2] = SHPP_INNERRING;
psShape = SHPCreateObject( nSHPType, -1, 3, anPartStart, panPartType,
15, x, y, z, m );
SHPWriteObject( hSHPHandle, -1, psShape );
SHPDestroyObject( psShape );
SHPClose( hSHPHandle );
}
bool
TeExportQuerierToShapefile(TeQuerier* querier, const std::string& base)
{
// check initial conditions
if (!querier)
return false;
if (!querier->loadInstances())
return false;
// Get the list of attributes defined by the input querier
bool onlyObjId = false;
TeAttributeList qAttList = querier->getAttrList();
if (qAttList.empty())
{
TeAttributeList qAttList;
TeAttribute at;
at.rep_.type_ = TeSTRING;
at.rep_.numChar_ = 100;
at.rep_.name_ = "ID";
at.rep_.isPrimaryKey_ = true;
qAttList.push_back(at);
onlyObjId = true;
}
// Handles to each type of geometries that will be created if necessary
DBFHandle hDBFPol = 0;
SHPHandle hSHPPol = 0;
DBFHandle hDBFLin = 0;
SHPHandle hSHPLin = 0;
DBFHandle hDBFPt = 0;
SHPHandle hSHPPt = 0;
// Some auxiliary variables
int totpoints;
double* padfX;
double* padfY;
unsigned int nVertices;
int* panPart;
SHPObject *psObject;
unsigned int posXY, npoints, nelem;
int shpRes;
// progress information
if (TeProgress::instance())
TeProgress::instance()->setTotalSteps(querier->numElemInstances());
clock_t t0, t1, t2;
t2 = clock();
t0 = t1 = t2;
int dt = CLOCKS_PER_SEC/2;
int dt2 = CLOCKS_PER_SEC; //* .000001;
// Loop through the instances writting their geometries and attributes
unsigned int iRecPol=0, iRecLin=0, iRecPt=0;
unsigned int n, l, m;
unsigned int nIProcessed = 0;
TeSTInstance st;
while(querier->fetchInstance(st))
{
totpoints = 0;
nVertices = 0;
if (st.hasPolygons())
{
TePolygonSet& polSet = st.getPolygons();
TePolygonSet::iterator itps;
int nVerticesCount = 0;
for (itps = polSet.begin(); itps != polSet.end(); ++itps)
{
nVertices = (*itps).size();
nVerticesCount += nVertices;
for (n=0; n<nVertices;++n)
totpoints += (*itps)[n].size();
}
panPart = (int *) malloc(sizeof(int) * nVerticesCount);
padfX = (double *) malloc(sizeof(double) * totpoints);
padfY = (double *) malloc(sizeof(double) * totpoints);
posXY = 0;
nelem = 0;
for (itps = polSet.begin(); itps != polSet.end(); ++itps)
{
TePolygon poly = *itps;
for (l=0; l<poly.size(); ++l)
{
if (l==0)
{
if (TeOrientation(poly[l]) == TeCOUNTERCLOCKWISE)
TeReverseLine(poly[l]);
}
else
{
if (TeOrientation(poly[l]) == TeCLOCKWISE)
TeReverseLine(poly[l]);
}
npoints = poly[l].size();
panPart[nelem]=posXY;
for (m=0; m<npoints; ++m)
{
padfX[posXY] = poly[l][m].x_;
padfY[posXY] = poly[l][m].y_;
posXY++;
}
nelem++;
}
}
psObject = SHPCreateObject(SHPT_POLYGON, -1, nelem, panPart, NULL, posXY, padfX, padfY, NULL, NULL);
if (hSHPPol == 0)
{
string fname = base + "_pol.shp";
hSHPPol = SHPCreate(fname.c_str(), SHPT_POLYGON);
assert (hSHPPol != 0);
}
shpRes = SHPWriteObject(hSHPPol, -1, psObject);
SHPDestroyObject(psObject);
free(panPart);
free(padfX);
free(padfY);
assert(shpRes != -1);
if (hDBFPol == 0)
{
hDBFPol = TeCreateDBFFile(base + "_pol.dbf", qAttList);
assert (hDBFPol != 0);
}
if (onlyObjId)
{
DBFWriteStringAttribute(hDBFPol, iRecPol, 0, st.objectId().c_str());
}
else
{
string val;
for (n=0; n<qAttList.size();++n)
{
st.getPropertyValue(val,n);
if (qAttList[n].rep_.type_ == TeSTRING || qAttList[n].rep_.type_ == TeDATETIME)
{
DBFWriteStringAttribute(hDBFPol, iRecPol, n, val.c_str());
}
else if (qAttList[n].rep_.type_ == TeINT)
{
DBFWriteIntegerAttribute(hDBFPol, iRecPol, n, atoi(val.c_str()));
}
else if (qAttList[n].rep_.type_ == TeREAL)
{
DBFWriteDoubleAttribute(hDBFPol, iRecPol, n, atof(val.c_str()));
}
}
}
++iRecPol;
}
if (st.hasCells())
{
TeCellSet& cellSet = st.getCells();
nVertices = cellSet.size();
totpoints = nVertices*5;
panPart = (int *) malloc(sizeof(int) * nVertices);
padfX = (double *) malloc(sizeof(double) * totpoints);
padfY = (double *) malloc(sizeof(double) * totpoints);
posXY = 0;
nelem = 0;
TeCellSet::iterator itcs;
for (itcs=cellSet.begin(); itcs!=cellSet.end(); ++itcs)
{
panPart[nelem]=posXY;
padfX[posXY] = (*itcs).box().lowerLeft().x();
padfY[posXY] = (*itcs).box().lowerLeft().y();
posXY++;
padfX[posXY] = (*itcs).box().upperRight().x();
padfY[posXY] = (*itcs).box().lowerLeft().y();
posXY++;
padfX[posXY] = (*itcs).box().upperRight().x();
padfY[posXY] = (*itcs).box().upperRight().y();
posXY++;
padfX[posXY] = (*itcs).box().lowerLeft().x();
padfY[posXY] = (*itcs).box().upperRight().y();
posXY++;
padfX[posXY] = (*itcs).box().lowerLeft().x();
padfY[posXY] = (*itcs).box().lowerLeft().y();
++posXY;
++nelem;
}
psObject = SHPCreateObject(SHPT_POLYGON, -1, nelem, panPart, NULL,posXY, padfX, padfY, NULL, NULL);
if (hSHPPol == 0)
{
string fname = base + "_pol.shp";
hSHPPol = SHPCreate(fname.c_str(), SHPT_POLYGON);
assert (hSHPPol != 0);
}
shpRes = SHPWriteObject(hSHPPol, -1, psObject);
SHPDestroyObject(psObject);
free(panPart);
free(padfX);
free(padfY);
assert(shpRes != -1);
if (hDBFPol == 0)
{
hDBFPol = TeCreateDBFFile(base + "_pol.dbf", qAttList);
assert (hDBFPol != 0);
}
if (onlyObjId)
{
DBFWriteStringAttribute(hDBFPol, iRecPol, 0, st.objectId().c_str());
}
else
{
string val;
for (n=0; n<qAttList.size();++n)
{
st.getPropertyValue(val,n);
if (qAttList[n].rep_.type_ == TeSTRING || qAttList[n].rep_.type_ == TeDATETIME)
{
DBFWriteStringAttribute(hDBFPol, iRecPol, n, val.c_str());
}
else if (qAttList[n].rep_.type_ == TeINT)
{
DBFWriteIntegerAttribute(hDBFPol, iRecPol, n, atoi(val.c_str()));
}
else if (qAttList[n].rep_.type_ == TeREAL)
{
DBFWriteDoubleAttribute(hDBFPol, iRecPol, n, atof(val.c_str()));
}
}
}
++iRecPol;
}
if (st.hasLines())
{
TeLineSet& lineSet = st.getLines();
nVertices = lineSet.size();
TeLineSet::iterator itls;
for (itls=lineSet.begin(); itls!=lineSet.end(); ++itls)
totpoints += (*itls).size();
panPart = (int *) malloc(sizeof(int) * nVertices);
padfX = (double *) malloc(sizeof(double) * totpoints);
padfY = (double *) malloc(sizeof(double) * totpoints);
posXY = 0;
nelem = 0;
for (itls=lineSet.begin(); itls!=lineSet.end(); ++itls)
{
panPart[nelem]=posXY;
for (l=0; l<(*itls).size(); ++l)
{
padfX[posXY] = (*itls)[l].x();
padfY[posXY] = (*itls)[l].y();
++posXY;
}
++nelem;
}
psObject = SHPCreateObject(SHPT_ARC, -1, nVertices, panPart, NULL, posXY, padfX, padfY, NULL, NULL);
if (hSHPLin == 0)
{
string fname = base + "_lin.shp";
hSHPLin = SHPCreate(fname.c_str(), SHPT_ARC);
assert (hSHPLin != 0);
}
shpRes = SHPWriteObject(hSHPLin, -1, psObject);
SHPDestroyObject(psObject);
free(panPart);
free(padfX);
free(padfY);
assert(shpRes != -1);
if (hDBFLin == 0)
{
hDBFLin = TeCreateDBFFile(base + "_lin.dbf", qAttList);
assert (hDBFLin != 0);
}
if (onlyObjId)
{
DBFWriteStringAttribute(hDBFLin, iRecLin, 0, st.objectId().c_str());
}
else
{
string val;
for (n=0; n<qAttList.size();++n)
{
st.getPropertyValue(val,n);
if (qAttList[n].rep_.type_ == TeSTRING || qAttList[n].rep_.type_ == TeDATETIME)
{
DBFWriteStringAttribute(hDBFLin, iRecLin, n, val.c_str());
}
else if (qAttList[n].rep_.type_ == TeINT)
{
DBFWriteIntegerAttribute(hDBFLin, iRecLin, n, atoi(val.c_str()));
}
else if (qAttList[n].rep_.type_ == TeREAL)
{
DBFWriteDoubleAttribute(hDBFLin, iRecLin, n, atof(val.c_str()));
}
}
}
++iRecLin;
}
if (st.hasPoints())
{
TePointSet& pointSet = st.getPoints();
nVertices = pointSet.size();
panPart = (int *) malloc(sizeof(int) * nVertices);
padfX = (double *) malloc(sizeof(double) * nVertices);
padfY = (double *) malloc(sizeof(double) * nVertices);
nelem = 0;
TePointSet::iterator itpts;
for (itpts=pointSet.begin(); itpts!=pointSet.end(); ++itpts)
{
panPart[nelem] = nelem;
padfX[nelem] = (*itpts).location().x();
padfY[nelem] = (*itpts).location().y();
++nelem;
}
psObject = SHPCreateObject(SHPT_POINT, -1, nVertices, panPart, NULL, nVertices, padfX, padfY, NULL, NULL );
if (hSHPPt == 0)
{
string fname = base + "_pt.shp";
hSHPPt = SHPCreate(fname.c_str(), SHPT_POINT);
assert (hSHPPt != 0);
}
shpRes = SHPWriteObject(hSHPPt, -1, psObject);
SHPDestroyObject(psObject);
free(panPart);
free(padfX);
free(padfY);
assert(shpRes != -1);
if (hDBFPt == 0)
{
hDBFPt = TeCreateDBFFile(base + "_pt.dbf", qAttList);
assert (hDBFPt != 0);
}
if (onlyObjId)
{
DBFWriteStringAttribute(hDBFPt, iRecPt, 0, st.objectId().c_str());
}
else
{
string val;
for (n=0; n<qAttList.size();++n)
{
st.getPropertyValue(val,n);
if (qAttList[n].rep_.type_ == TeSTRING || qAttList[n].rep_.type_ == TeDATETIME)
{
DBFWriteStringAttribute(hDBFPt, iRecPt, n, val.c_str());
}
else if (qAttList[n].rep_.type_ == TeINT)
{
DBFWriteIntegerAttribute(hDBFPt, iRecPt, n, atoi(val.c_str()));
}
else if (qAttList[n].rep_.type_ == TeREAL)
{
DBFWriteDoubleAttribute(hDBFPt, iRecPt, n, atof(val.c_str()));
}
}
}
++iRecPt;
}
++nIProcessed;
if (TeProgress::instance() && int(t2-t1) > dt)
{
t1 = t2;
if(((int)(t2-t0) > dt2))
{
if (TeProgress::instance()->wasCancelled())
break;
else
TeProgress::instance()->setProgress(nIProcessed);
}
}
}
if (hDBFPol != 0)
DBFClose(hDBFPol);
if (hSHPPol != 0)
SHPClose(hSHPPol);
if (hDBFLin != 0)
DBFClose(hDBFLin);
if (hSHPLin != 0)
SHPClose(hSHPLin);
if (hDBFPt != 0)
DBFClose(hDBFPt);
if (hSHPPt != 0)
SHPClose(hSHPPt);
if (TeProgress::instance())
TeProgress::instance()->reset();
return true;
}
int main( int argc, char ** argv )
{
SHPHandle hSHP;
int nShapeType, nVertices, nParts, *panParts, i, nVMax;
double *padfX, *padfY;
SHPObject *psObject;
/* -------------------------------------------------------------------- */
/* Display a usage message. */
/* -------------------------------------------------------------------- */
if( argc < 2 )
{
printf( "shpadd shp_file [[x y] [+]]*\n" );
exit( 1 );
}
/* -------------------------------------------------------------------- */
/* Open the passed shapefile. */
/* -------------------------------------------------------------------- */
hSHP = SHPOpen( argv[1], "r+b" );
if( hSHP == NULL )
{
printf( "Unable to open:%s\n", argv[1] );
exit( 1 );
}
SHPGetInfo( hSHP, NULL, &nShapeType, NULL, NULL );
if( argc == 2 )
nShapeType = SHPT_NULL;
/* -------------------------------------------------------------------- */
/* Build a vertex/part list from the command line arguments. */
/* -------------------------------------------------------------------- */
nVMax = 1000;
padfX = (double *) malloc(sizeof(double) * nVMax);
padfY = (double *) malloc(sizeof(double) * nVMax);
nVertices = 0;
if( (panParts = (int *) malloc(sizeof(int) * 1000 )) == NULL )
{
printf( "Out of memory\n" );
exit( 1 );
}
nParts = 1;
panParts[0] = 0;
for( i = 2; i < argc; )
{
if( argv[i][0] == '+' )
{
panParts[nParts++] = nVertices;
i++;
}
else if( i < argc-1 )
{
if( nVertices == nVMax )
{
nVMax = nVMax * 2;
padfX = (double *) realloc(padfX,sizeof(double)*nVMax);
padfY = (double *) realloc(padfY,sizeof(double)*nVMax);
}
sscanf( argv[i], "%lg", padfX+nVertices );
sscanf( argv[i+1], "%lg", padfY+nVertices );
nVertices += 1;
i += 2;
}
}
/* -------------------------------------------------------------------- */
/* Write the new entity to the shape file. */
/* -------------------------------------------------------------------- */
psObject = SHPCreateObject( nShapeType, -1, nParts, panParts, NULL,
nVertices, padfX, padfY, NULL, NULL );
SHPWriteObject( hSHP, -1, psObject );
SHPDestroyObject( psObject );
SHPClose( hSHP );
free( panParts );
free( padfX );
free( padfY );
return 0;
}
void shapefileClip::CreateShapeFile(vector<ossimPolygon> &polys, const char *shapeFilename)
{
if (polys.empty())
{
cerr << "The polygons do not exist...cannot create shape file" << endl
<< "Line: " << __LINE__ << " " << __FILE__ << endl;
return;
}
SHPObject *psObject;
SHPHandle hSHP;
double *px, *py;
vector<ossimPolygon>::iterator polyIter;
vector<ossimDpt> vertices;
vector<ossimDpt>::iterator vertIter;
hSHP = SHPCreate(shapeFilename, SHPT_POLYGON);
if( hSHP == NULL || shapeFilename == NULL)
{
cerr << "Unable to create: " << shapeFilename << endl
<< "Line: " << __LINE__ << " " << __FILE__ << endl;
exit(EXIT_FAILURE);
}
// Build DBF.
DBFHandle hDBF;
hDBF = DBFCreate(shapeFilename);
if( hDBF == NULL)
{
cerr << "Unable to create: " << shapeFilename << " DBF File" << endl
<< "Line: " << __LINE__ << " " << __FILE__ << endl;
exit(EXIT_FAILURE);
}
// Add fields.
DBFAddField(hDBF, "poly_num", FTString, 30, 0);
polyIter = polys.begin();
int arrayIndex;
int poly_num = 0;
while (polyIter != polys.end())
{
DBFWriteStringAttribute(hDBF, poly_num, 0, ossimString::toString(poly_num));
vertices = (*polyIter).getVertexList();
vertIter = vertices.begin();
double *x = new double[vertices.size()];
double *y = new double[vertices.size()];
int *panParts = new int[vertices.size()];
panParts[0] = 0;
// SHPCreateObject deletes these
px = &x[0];
py = &y[0];
arrayIndex = 0;
while (vertIter != vertices.end())
{
x[arrayIndex] = (*vertIter).x;
y[arrayIndex++] = (*vertIter).y;
vertIter++;
}
psObject = SHPCreateObject( SHPT_POLYGON, -1, 1, panParts, NULL,
vertices.size(), px, py, NULL, NULL );
if (psObject != NULL)
{
SHPWriteObject( hSHP, -1, psObject );
SHPDestroyObject( psObject );
}
else
{
cerr << "Shape object could not be written to file" << endl
<< "Line: " << __LINE__ << " " << __FILE__ << endl;
SHPClose(hSHP);
delete []x;
delete []y;
delete [] panParts;
exit(EXIT_FAILURE);
}
polyIter++;
poly_num++;
delete []x;
delete []y;
delete [] panParts;
}
DBFClose(hDBF);
SHPClose( hSHP );
}
bool _curv_save_shp(const d_curv * contour, const char * filename) {
if (!contour->getName())
writelog(LOG_MESSAGE,"saving curv to ERSI shape file %s", filename);
else
writelog(LOG_MESSAGE,"saving curv \"%s\" to ERSI shape file %s", contour->getName(), filename);
if (!contour) {
writelog(LOG_WARNING, "NULL pointer to curv.");
return false;
};
DBFHandle hDBF;
SHPHandle hSHP;
hSHP = SHPOpen( filename, "rb+" );
hDBF = DBFOpen( filename, "rb+" );
if (hSHP == NULL || hDBF == NULL) {
if (hSHP)
SHPClose( hSHP );
if (hDBF)
DBFClose( hDBF );
hSHP = SHPCreate( filename, SHPT_ARC );
if( hSHP == NULL ) {
writelog(LOG_ERROR, "Unable to create:%s", filename );
return false;
}
hDBF = DBFCreate( filename );
}
int shpType;
SHPGetInfo(hSHP, NULL, &shpType, NULL, NULL);
if (shpType != SHPT_ARC) {
writelog(LOG_ERROR, "%s : Wrong shape type! Should be SHPT_ARC.", filename);
SHPClose( hSHP );
DBFClose( hDBF );
return false;
}
int name_field = DBFGetFieldIndex( hDBF, "NAME" );
if (name_field == -1) {
if( DBFAddField( hDBF, "NAME", FTString, 50, 0 ) == -1 )
{
writelog(LOG_ERROR, "DBFAddField(%s,FTString) failed.", "NAME");
SHPClose( hSHP );
DBFClose( hDBF );
return false;
}
name_field = DBFGetFieldIndex( hDBF, "NAME" );
};
std::vector<REAL> data_x(contour->size());
std::vector<REAL> data_y(contour->size());
std::copy(contour->X->begin(), contour->X->end(), data_x.begin());
std::copy(contour->Y->begin(), contour->Y->end(), data_y.begin());
SHPObject * psObject = SHPCreateObject(SHPT_ARC,
-1, 0, NULL, NULL, contour->size(),
&*(data_x.begin()), &*(data_y.begin()), NULL, NULL);
SHPComputeExtents(psObject);
int pos = SHPWriteObject(hSHP, -1, psObject);
SHPDestroyObject(psObject);
if (contour->getName())
DBFWriteStringAttribute(hDBF, pos, name_field, contour->getName() );
SHPClose( hSHP );
DBFClose( hDBF );
return true;
};
bool TeExportPolygonSet2SHP( const TePolygonSet& ps,const std::string& base_file_name )
{
// creating files names
std::string dbfFilename = base_file_name + ".dbf";
std::string shpFilename = base_file_name + ".shp";
// creating polygons attribute list ( max attribute size == 25 )
TeAttributeList attList;
TeAttribute at;
at.rep_.type_ = TeSTRING; //the id of the cell
at.rep_.numChar_ = 25;
at.rep_.name_ = "object_id_";
at.rep_.isPrimaryKey_ = true;
attList.push_back(at);
/* DBF output file handle creation */
DBFHandle hDBF = TeCreateDBFFile (dbfFilename, attList);
if ( hDBF == 0 )
return false;
/* SHP output file handle creation */
SHPHandle hSHP = SHPCreate( shpFilename.c_str(), SHPT_POLYGON );
if( hSHP == 0 )
{
DBFClose( hDBF );
return false;
}
/* Writing polygons */
int iRecord = 0;
int totpoints = 0;
double *padfX, *padfY;
SHPObject *psObject;
int posXY, npoints, nelem;
int nVertices;
int* panParts;
TePolygonSet::iterator itps;
TePolygon poly;
for (itps = ps.begin() ; itps != ps.end() ; itps++ ) {
poly=(*itps);
totpoints = 0;
nVertices = poly.size();
for (unsigned int n=0; n<poly.size();n++) {
totpoints += poly[n].size();
}
panParts = (int *) malloc(sizeof(int) * nVertices);
padfX = (double *) malloc(sizeof(double) * totpoints);
padfY = (double *) malloc(sizeof(double) * totpoints);
posXY = 0;
nelem = 0;
for (unsigned int l=0; l<poly.size(); ++l) {
if (l==0) {
if (TeOrientation(poly[l]) == TeCOUNTERCLOCKWISE) {
TeReverseLine(poly[l]);
}
} else {
if (TeOrientation(poly[l]) == TeCLOCKWISE) {
TeReverseLine(poly[l]);
}
}
npoints = poly[l].size();
panParts[nelem]=posXY;
for (int m=0; m<npoints; m++ ) {
padfX[posXY] = poly[l][m].x_;
padfY[posXY] = poly[l][m].y_;
posXY++;
}
nelem++;
}
psObject = SHPCreateObject( SHPT_POLYGON, -1, nelem, panParts, NULL,
posXY, padfX, padfY, NULL, NULL );
int shpRes = SHPWriteObject( hSHP, -1, psObject );
if (shpRes == -1 )
{
DBFClose( hDBF );
SHPClose( hSHP );
return false;
}
SHPDestroyObject( psObject );
free( panParts );
free( padfX );
free( padfY );
// writing attributes - same creation order
DBFWriteStringAttribute(hDBF, iRecord, 0, poly.objectId().c_str() );
iRecord++;
}
DBFClose( hDBF );
SHPClose( hSHP );
return true;
}
bool _pnts_save_shp(const d_points * pnts, const char * filename) {
if (!pnts) {
writelog(LOG_WARNING, "NULL pointer to points.");
return false;
};
DBFHandle hDBF;
SHPHandle hSHP;
hSHP = SHPOpen( filename, "rb+" );
hDBF = DBFOpen( filename, "rb+" );
if (hSHP == NULL || hDBF == NULL) {
if (hSHP)
SHPClose( hSHP );
if (hDBF)
DBFClose( hDBF );
hSHP = SHPCreate( filename, SHPT_POINT );
if( hSHP == NULL ) {
writelog(LOG_ERROR, "Unable to create:%s", filename );
return false;
}
hDBF = DBFCreate( filename );
}
int shpType;
SHPGetInfo(hSHP, NULL, &shpType, NULL, NULL);
if (shpType != SHPT_POINT) {
writelog(LOG_ERROR, "%s : Wrong shape type!", filename);
SHPClose( hSHP );
DBFClose( hDBF );
return false;
}
int name_field = DBFGetFieldIndex( hDBF, "NAME" );
int val_field = DBFGetFieldIndex( hDBF, "VALUE" );
if (name_field == -1) {
if( DBFAddField( hDBF, "NAME", FTString, 50, 0 ) == -1 )
{
writelog(LOG_ERROR, "DBFAddField(%s,FTString) failed.", "NAME");
SHPClose( hSHP );
DBFClose( hDBF );
return false;
}
name_field = DBFGetFieldIndex( hDBF, "NAME" );
}
if (val_field == -1) {
if( DBFAddField( hDBF, "VALUE", FTDouble, 50, 0 ) == -1 )
{
writelog(LOG_ERROR, "DBFAddField(%s,FTString) failed.", "VALUE");
SHPClose( hSHP );
DBFClose( hDBF );
return false;
}
val_field = DBFGetFieldIndex( hDBF, "VALUE" );
}
char buf[1024];
size_t i;
for (i = 0; i < pnts->size(); i++) {
double x = (*(pnts->X))(i);
double y = (*(pnts->Y))(i);
SHPObject * psObject = SHPCreateObject(SHPT_POINT,
-1, 0, NULL, NULL, 1,
&x, &y, NULL, NULL);
SHPComputeExtents(psObject);
int pos = SHPWriteObject(hSHP, -1, psObject);
SHPDestroyObject(psObject);
if (pnts->names)
DBFWriteStringAttribute(hDBF, pos, name_field, (*(pnts->names))(i) );
else {
sprintf(buf,"%d",(int)i);
DBFWriteStringAttribute(hDBF, pos, name_field, buf );
}
REAL val = (*(pnts->Z))(i);
DBFWriteDoubleAttribute(hDBF, pos, val_field, val);
}
SHPClose( hSHP );
DBFClose( hDBF );
return true;
};
/*
* Write the geometry for a set of polygons to a shape file
* This needs to map between our internal structure for the
* shape polygons and that expected by the shape file writer.
*/
int polyShapeWrite(PolyObject * poly /* set of polygons */ ,
char *name /* name of file to write to */ )
{
SHPHandle hSHP;
SHPObject *psObject;
Vertex *v;
PolyShape *ps;
PolyShapeList *plist;
static int v_size;
static int p_size;
int i, j, k, n;
int np, nv;
int nShapeType;
int m;
int nVertices;
int *partsStart;
double *vx, *vy;
if(v_size == 0)
{
v_size = 1024;
/*
* allocate space for each of the vertices
*/
vx = (double *) malloc(2 * v_size * sizeof(double));
if(vx == NULL)
{
WARN("Memory allocation error in polyShapeWrite");
return 1;
}
vy = vx + v_size;
}
if(p_size == 0)
{
p_size = 1024;
partsStart = (int *) malloc(p_size * sizeof(int));
if(partsStart == NULL)
{
WARN("Memory allocation error in polyShapeWrite");
return 1;
}
}
nShapeType = poly->nSHPType;
hSHP = SHPCreate(name, nShapeType);
if(hSHP == NULL)
{
WARN2("Unable to create ", name);
return 1;
}
/*
* make sure space is available for all vertices - if it gets full,
* reallocate with double the size
*/
n = poly->nObjects;
plist = poly->plist;
/*
* loop over all polygons
*/
for(i = 0; i < n; i++)
{
ps = plist->ps;
/* debug code BDB */
/*if(PolyArea(ps) < 0)
printf("In polyShapeWrite area is negative for shape %d\n", i);
*/
np = ps->num_contours;
nVertices = 0;
while(np > p_size)
{
p_size *= 2;
partsStart = (int *) realloc(partsStart, 2 * p_size * sizeof(int));
if(partsStart == NULL)
{
WARN("Memory allocation error in polyShapeWrite");
return 1;
}
}
partsStart[0] = 0;
/*
* population of parts field for ShapeFiles
*/
for(j = 0; j < np; j++)
{
nv = ps->contour[j].num_vertices;
nVertices += nv;
partsStart[j + 1] = nVertices;
}
while(nVertices > v_size)
{
v_size *= 2;
vx = (double *) realloc(vx, 2 * v_size * sizeof(double));
if(vx == NULL)
{
WARN("Memory allocation error in polyShapeWrite");
return 1;
}
vy = vx + v_size;
}
/*
* population of vertices field for ShapeFiles
*/
m = 0;
for(j = 0; j < np; j++)
{
nv = ps->contour[j].num_vertices;
v = ps->contour[j].vertex;
for(k = 0; k < nv; k++)
{
vx[m] = v[k].x;
vy[m] = v[k].y;
m++;
}
}
/*
* write a polygon to the .shp file
*/
psObject = SHPCreateObject(nShapeType, -1, np, partsStart, NULL,
nVertices, vx, vy, NULL, NULL);
SHPWriteObject(hSHP, -1, psObject);
SHPDestroyObject(psObject);
plist = plist->next; /* go to next polygon */
} /* end loop over polygons */
SHPClose(hSHP);
return 0;
} /* end of polyShapeWrite function */
void Builder::print_shpObjects()
{
QgsDebugMsg( QString( "Number of primitives: %1" ).arg( shpObjects.size() ) );
QgsDebugMsg( QString( "Number of text fields: %1" ).arg( textObjects.size() ) );
QgsDebugMsg( QString( "Number of inserts fields: %1" ).arg( insertObjects.size() ) );
SHPHandle hSHP;
if ( fname.endsWith( ".shp", Qt::CaseInsensitive ) )
{
QString fn( fname.mid( fname.length() - 4 ) );
outputdbf = fn + ".dbf";
outputshp = fn + ".shp";
outputtdbf = fn + "_texts.dbf";
outputtshp = fn + "_texts.shp";
outputidbf = fn + "_inserts.dbf";
outputishp = fn + "_inserts.shp";
}
else
{
outputdbf = outputtdbf = outputidbf = fname + ".dbf";
outputshp = outputtshp = outputishp = fname + ".shp";
}
DBFHandle dbffile = DBFCreate( outputdbf.toUtf8() );
DBFAddField( dbffile, "myid", FTInteger, 10, 0 );
hSHP = SHPCreate( outputshp.toUtf8(), shapefileType );
QgsDebugMsg( "Writing to main shp file..." );
for ( int i = 0; i < shpObjects.size(); i++ )
{
SHPWriteObject( hSHP, -1, shpObjects[i] );
SHPDestroyObject( shpObjects[i] );
DBFWriteIntegerAttribute( dbffile, i, 0, i );
}
SHPClose( hSHP );
DBFClose( dbffile );
QgsDebugMsg( "Done!" );
if ( !textObjects.isEmpty() )
{
SHPHandle thSHP;
DBFHandle Tdbffile = DBFCreate( outputtdbf.toUtf8() );
thSHP = SHPCreate( outputtshp.toUtf8(), SHPT_POINT );
DBFAddField( Tdbffile, "tipx", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tipy", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tipz", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tapx", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tapy", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "tapz", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "height", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "scale", FTDouble, 20, 10 );
DBFAddField( Tdbffile, "flags", FTInteger, 10, 0 );
DBFAddField( Tdbffile, "hjust", FTInteger, 10, 0 );
DBFAddField( Tdbffile, "vjust", FTInteger, 10, 0 );
DBFAddField( Tdbffile, "text", FTString, 50, 0 );
DBFAddField( Tdbffile, "style", FTString, 50, 0 );
DBFAddField( Tdbffile, "angle", FTDouble, 20, 10 );
QgsDebugMsg( "Writing Texts' shp File..." );
for ( int i = 0; i < textObjects.size(); i++ )
{
SHPObject *psObject;
double x = textObjects[i].ipx;
double y = textObjects[i].ipy;
double z = textObjects[i].ipz;
psObject = SHPCreateObject( SHPT_POINT, i, 0, NULL, NULL, 1, &x, &y, &z, NULL );
SHPWriteObject( thSHP, -1, psObject );
DBFWriteDoubleAttribute( Tdbffile, i, 0, textObjects[i].ipx );
DBFWriteDoubleAttribute( Tdbffile, i, 1, textObjects[i].ipy );
DBFWriteDoubleAttribute( Tdbffile, i, 2, textObjects[i].ipz );
DBFWriteDoubleAttribute( Tdbffile, i, 3, textObjects[i].apx );
DBFWriteDoubleAttribute( Tdbffile, i, 4, textObjects[i].apy );
DBFWriteDoubleAttribute( Tdbffile, i, 5, textObjects[i].apz );
DBFWriteDoubleAttribute( Tdbffile, i, 6, textObjects[i].height );
DBFWriteDoubleAttribute( Tdbffile, i, 7, textObjects[i].xScaleFactor );
DBFWriteIntegerAttribute( Tdbffile, i, 8, textObjects[i].textGenerationFlags );
DBFWriteIntegerAttribute( Tdbffile, i, 9, textObjects[i].hJustification );
DBFWriteIntegerAttribute( Tdbffile, i, 10, textObjects[i].vJustification );
DBFWriteStringAttribute( Tdbffile, i, 11, textObjects[i].text.c_str() );
DBFWriteStringAttribute( Tdbffile, i, 12, textObjects[i].style.c_str() );
DBFWriteDoubleAttribute( Tdbffile, i, 13, textObjects[i].angle );
SHPDestroyObject( psObject );
}
SHPClose( thSHP );
DBFClose( Tdbffile );
QgsDebugMsg( "Done!" );
}
if ( !insertObjects.isEmpty() )
{
SHPHandle ihSHP;
DBFHandle Idbffile = DBFCreate( outputidbf.toUtf8() );
ihSHP = SHPCreate( outputishp.toUtf8(), SHPT_POINT );
DBFAddField( Idbffile, "name", FTString, 200, 0 );
DBFAddField( Idbffile, "ipx", FTDouble, 20, 10 );
DBFAddField( Idbffile, "ipy", FTDouble, 20, 10 );
DBFAddField( Idbffile, "ipz", FTDouble, 20, 10 );
DBFAddField( Idbffile, "sx", FTDouble, 20, 10 );
DBFAddField( Idbffile, "sy", FTDouble, 20, 10 );
DBFAddField( Idbffile, "sz", FTDouble, 20, 10 );
DBFAddField( Idbffile, "angle", FTDouble, 20, 10 );
DBFAddField( Idbffile, "cols", FTInteger, 20, 0 );
DBFAddField( Idbffile, "rows", FTInteger, 20, 0 );
DBFAddField( Idbffile, "colsp", FTDouble, 20, 10 );
DBFAddField( Idbffile, "rowsp", FTDouble, 20, 10 );
QgsDebugMsg( "Writing Insert' shp File..." );
for ( int i = 0; i < insertObjects.size(); i++ )
{
SHPObject *psObject;
double &x = insertObjects[i].ipx;
double &y = insertObjects[i].ipy;
double &z = insertObjects[i].ipz;
psObject = SHPCreateObject( SHPT_POINT, i, 0, NULL, NULL, 1, &x, &y, &z, NULL );
SHPWriteObject( ihSHP, -1, psObject );
int c = 0;
DBFWriteStringAttribute( Idbffile, i, c++, insertObjects[i].name.c_str() );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].ipx );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].ipy );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].ipz );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].sx );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].sy );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].sz );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].angle );
DBFWriteIntegerAttribute( Idbffile, i, c++, insertObjects[i].cols );
DBFWriteIntegerAttribute( Idbffile, i, c++, insertObjects[i].rows );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].colSp );
DBFWriteDoubleAttribute( Idbffile, i, c++, insertObjects[i].rowSp );
SHPDestroyObject( psObject );
}
SHPClose( ihSHP );
DBFClose( Idbffile );
QgsDebugMsg( "Done!" );
}
}
void Builder::addArc( const DL_ArcData& data )
{
if ( shapefileType != SHPT_ARC )
{
QgsDebugMsg( "ignoring arc" );
return;
}
int fromAngle = ( int ) data.angle1 + 1;
int toAngle = ( int ) data.angle2 + 1;
QgsDebugMsg( QString( "arc (%1,%2,%3 r=%4 a1=%5 a2=%6)" )
.arg( data.cx ).arg( data.cy ).arg( data.cz )
.arg( data.radius )
.arg( data.angle1 ).arg( data.angle2 ) );
if ( ignoringBlock )
{
QgsDebugMsg( "skipping arc in block" );
return;
}
register int i = 0;
register long shpIndex = 0;
// Approximate the arc
double radianMeasure;
std::vector <DL_PointData> arcPoints;
DL_PointData myPoint;
for ( i = fromAngle; ; i++, shpIndex++ )
{
if ( i > 360 )
i = 0;
if ( shpIndex > 1000 )
break;
radianMeasure = i * M_PI / 180.0;
myPoint.x = data.radius * cos( radianMeasure ) + data.cx + currentBlockX;
myPoint.y = data.radius * sin( radianMeasure ) + data.cy + currentBlockY;
myPoint.z = data.cz;
arcPoints.push_back( myPoint );
if ( i == toAngle )
break;
}
// Finalize
SHPObject *psShape;
int dim = arcPoints.size();
double *xv = new double[dim];
double *yv = new double[dim];
double *zv = new double[dim];
for ( int i = 0; i < dim; i++ )
{
xv[i] = arcPoints[i].x;
yv[i] = arcPoints[i].y;
zv[i] = arcPoints[i].z;
}
psShape = SHPCreateObject( shapefileType, fetchedprims, 0, NULL, NULL, dim, xv, yv, zv, NULL );
delete [] xv;
delete [] yv;
delete [] zv;
shpObjects.push_back( psShape );
fetchedprims++;
arcPoints.clear();
}
///////////////////////////////////////////////////////////////////////////////
// Export eines Objektes
HRESULT CArcViewLayer::ExportData (
GSTRUCT *pGS, MFELD *pMF, LPCSTR pcUIdent, CArcViewLayerAttributes *pMap)
{
OBJECTTYPE rgType = GetType();
int iShapeId = -1;
int iObjTyp = pGS -> Typ;
_ASSERTE(rgType == ObjType2OBJECTTYPE(pGS -> Typ, true)); // Objekttyp muß stimmen
// Geometrie erzeugen
if (OBJECTTYPE_Area == rgType) {
// Anzahl der Konturen feststellen und Konturfeld zusammenbauen
int iKCnt = 1;
vector<int> Cnts(1);
int iCurr = 0;
Cnts[0] = 0;
for (int i = 0; 0 != pGS -> cnt[i]; ++i) {
if (i > 0)
Cnts.push_back(iCurr);
iCurr += pGS -> cnt[i];
}
iKCnt = i;
_ASSERTE(iKCnt > 0 && iKCnt == Cnts.size());
// Objekt erzeugen
CArcViewObject Obj(SHPCreateObject(m_nShapeType, -1, iKCnt, Cnts.begin(), NULL,
pGS -> GSize, pGS -> x, pGS -> y, NULL, NULL));
iShapeId = SHPWriteObject(m_hSHP, -1, Obj);
} else {
// Objekt erzeugen
CArcViewObject Obj(SHPCreateSimpleObject(m_nShapeType, pGS -> GSize, pGS -> x, pGS -> y, NULL));
iShapeId = SHPWriteObject(m_hSHP, -1, Obj);
}
if (iShapeId == -1)
return E_FAIL;
// Attribute sicherstellen (bei TRiAS-Datenquellen jedesmal)
if (!HasFields() || DEX_GetTRiASDataSourceEx(DEX_GetObjectsProject(pGS -> Id))) {
// sämtliche Attribute dieses Layers durchgehen und ggf. erzeugen
for (CArcViewLayerAttributes::iterator it = pMap -> begin(); it != pMap -> end(); ++it) {
// Feld in Datei erzeugen
int iField = -1;
CArcViewAttribute &rAttr = (*it).second;
LPCSTR pcName = rAttr.GetName();
if (OBJECTTYPE_Text != m_rgType && !strcmp (pcName, g_cbLabelText))
continue; // Labeltext nur für Textobjekte
if (FAILED(FieldExists (pcName, rAttr.GetTyp(), &iField)))
{
RETURN_FAILED_HRESULT(AddField(pcName, rAttr.GetTyp(), rAttr.GetLen(), rAttr.GetDecimals(), &iField));
}
_ASSERTE(-1 != iField);
// mehrerer Objekttypen eines Idents haben identischen Satz von Attributen
_ASSERTE(-1 == (*it).second.GetField(iObjTyp) ||
(*it).second.GetField(iObjTyp) == iField ||
DEX_GetTRiASDataSourceEx(DEX_GetObjectsProject(pGS -> Id)));
// Feldnummer beim Attribut speichern
(*it).second.SetField(iField, iObjTyp);
}
// Textlabel für Textobjekte
if (OBJECTTYPE_Text == m_rgType) {
pair<CArcViewLayerAttributes::iterator, bool> p =
pMap -> insert (CArcViewLayerAttributes::value_type (-1, CArcViewAttribute(g_cbLabelText, 'a', _MAX_PATH)));
if (p.second) {
int iField = -1;
it = p.first;
if (FAILED(FieldExists (g_cbLabelText, FTString, &iField)))
{
RETURN_FAILED_HRESULT(AddField(g_cbLabelText, FTString, _MAX_PATH, 0, &iField));
}
_ASSERTE(-1 != iField);
(*it).second.SetField(iField, iObjTyp);
}
}
SetHasFields();
}
// Attributwerte schreiben
if (NULL != pMF) {
// nur, wenn mindestens ein Attribut ausgegeben werden soll
for (MFELD *pMFT = pMF; 0 != pMFT -> MCode; ++pMFT) {
if (NULL != pMap) {
CArcViewLayerAttributes::iterator it = pMap -> find (pMFT -> MCode);
_ASSERTE(it != pMap -> end()); // Attribut sollte (jetzt) existieren
if (it != pMap -> end()) {
// Feld muß bereits erzeugt worden sein und Typ muß mit DBF übereinstimmen
int iField = (*it).second.GetField(iObjTyp);
_ASSERTE(-1 != iField);
_ASSERTE((*it).second.GetTyp() == DBFGetFieldInfo (m_hDBF, iField, NULL, NULL, NULL));
// Wert je nach Typ in die Datenbank schreiben
switch ((*it).second.GetTyp()) {
case FTString:
{
char cbBuffer[_MAX_PATH] = { '\0' };
if (NULL != pMFT -> MText)
OemToCharBuff(pMFT -> MText, cbBuffer, min(MAX_DBASEFIELD_LEN, strlen(pMFT -> MText))+1); // '\0' mit konvertieren
DBFWriteStringAttribute(m_hDBF, iShapeId, iField, cbBuffer);
}
break;
case FTInteger:
DBFWriteIntegerAttribute(m_hDBF, iShapeId, iField, (NULL != pMFT -> MText) ? atol(pMFT -> MText) : 0);
break;
case FTDouble:
DBFWriteDoubleAttribute(m_hDBF, iShapeId, iField, (NULL != pMFT -> MText) ? atof(pMFT -> MText) : 0.0);
break;
}
}
} else {
_ASSERTE(NULL != pMap); // eigentlich sollte eine Map da sein
// keine Map, also erstmal leeren Datensatz schreiben
int iCnt = DBFGetFieldCount(m_hDBF);
for (int i = 0; i < iCnt; ++i) {
switch (DBFGetFieldInfo(m_hDBF, i, NULL, NULL, NULL)) {
case FTString:
DBFWriteStringAttribute(m_hDBF, iShapeId, i, g_cbNil);
break;
case FTInteger:
DBFWriteIntegerAttribute(m_hDBF, iShapeId, i, 0);
break;
case FTDouble:
DBFWriteDoubleAttribute(m_hDBF, iShapeId, i, 0.0);
break;
}
}
}
}
}
return S_OK;
}
int main( int argc, char ** argv )
{
SHPHandle hSHP;
int nShapeType, nVertices, nParts, *panParts, i, nVMax;
double *padfX, *padfY, *padfZ = NULL, *padfM = NULL;
SHPObject *psObject;
const char *tuple = "";
const char *filename;
/* -------------------------------------------------------------------- */
/* Display a usage message. */
/* -------------------------------------------------------------------- */
if( argc < 2 )
{
printf( "shpadd shp_file [[x y] [+]]*\n" );
printf( " or\n" );
printf( "shpadd shp_file -m [[x y m] [+]]*\n" );
printf( " or\n" );
printf( "shpadd shp_file -z [[x y z] [+]]*\n" );
printf( " or\n" );
printf( "shpadd shp_file -zm [[x y z m] [+]]*\n" );
exit( 1 );
}
filename = argv[1];
argv++;
argc--;
/* -------------------------------------------------------------------- */
/* Check for tuple description options. */
/* -------------------------------------------------------------------- */
if( argc > 1
&& (strcmp(argv[1],"-z") == 0
|| strcmp(argv[1],"-m") == 0
|| strcmp(argv[1],"-zm") == 0) )
{
tuple = argv[1] + 1;
argv++;
argc--;
}
/* -------------------------------------------------------------------- */
/* Open the passed shapefile. */
/* -------------------------------------------------------------------- */
hSHP = SHPOpen( filename, "r+b" );
if( hSHP == NULL )
{
printf( "Unable to open:%s\n", filename );
exit( 1 );
}
SHPGetInfo( hSHP, NULL, &nShapeType, NULL, NULL );
if( argc == 1 )
nShapeType = SHPT_NULL;
/* -------------------------------------------------------------------- */
/* Build a vertex/part list from the command line arguments. */
/* -------------------------------------------------------------------- */
nVMax = 1000;
padfX = (double *) malloc(sizeof(double) * nVMax);
padfY = (double *) malloc(sizeof(double) * nVMax);
if( strchr(tuple,'z') )
padfZ = (double *) malloc(sizeof(double) * nVMax);
if( strchr(tuple,'m') )
padfM = (double *) malloc(sizeof(double) * nVMax);
nVertices = 0;
if( (panParts = (int *) malloc(sizeof(int) * 1000 )) == NULL )
{
printf( "Out of memory\n" );
exit( 1 );
}
nParts = 1;
panParts[0] = 0;
for( i = 1; i < argc; )
{
if( argv[i][0] == '+' )
{
panParts[nParts++] = nVertices;
i++;
}
else if( i < argc-1-strlen(tuple) )
{
if( nVertices == nVMax )
{
nVMax = nVMax * 2;
padfX = (double *) realloc(padfX,sizeof(double)*nVMax);
padfY = (double *) realloc(padfY,sizeof(double)*nVMax);
if( padfZ )
padfZ = (double *) realloc(padfZ,sizeof(double)*nVMax);
if( padfM )
padfM = (double *) realloc(padfM,sizeof(double)*nVMax);
}
sscanf( argv[i++], "%lg", padfX+nVertices );
sscanf( argv[i++], "%lg", padfY+nVertices );
if( padfZ )
sscanf( argv[i++], "%lg", padfZ+nVertices );
if( padfM )
sscanf( argv[i++], "%lg", padfM+nVertices );
nVertices += 1;
}
}
/* -------------------------------------------------------------------- */
/* Write the new entity to the shape file. */
/* -------------------------------------------------------------------- */
psObject = SHPCreateObject( nShapeType, -1, nParts, panParts, NULL,
nVertices, padfX, padfY, padfZ, padfM );
SHPWriteObject( hSHP, -1, psObject );
SHPDestroyObject( psObject );
SHPClose( hSHP );
free( panParts );
free( padfX );
free( padfY );
free( padfZ );
free( padfM );
return 0;
}
