Exemplo n.º 1
0
/* Using the given list of services, stage them into our global state. Every
 * service version are handled. This function can remove entries in the given
 * service_list.
 *
 * Staging a service means that we take all services in service_list and we
 * put them in the staging list (global) which acts as a temporary list that
 * is used by the service loading key process. In other words, staging a
 * service puts it in a list to be considered when loading the keys and then
 * moved to the main global list. */
static void
stage_services(smartlist_t *service_list)
{
  tor_assert(service_list);

  /* This is v2 specific. Trigger service pruning which will make sure the
   * just configured services end up in the main global list. It should only
   * be done in non validation mode because v2 subsystem handles service
   * object differently. */
  rend_service_prune_list();

  /* Cleanup v2 service from the list, we don't need those object anymore
   * because we validated them all against the others and we want to stage
   * only >= v3 service. And remember, v2 has a different object type which is
   * shadow copied from an hs_service_t type. */
  SMARTLIST_FOREACH_BEGIN(service_list, hs_service_t *, s) {
    if (s->config.version == HS_VERSION_TWO) {
      SMARTLIST_DEL_CURRENT(service_list, s);
      hs_service_free(s);
    }
  } SMARTLIST_FOREACH_END(s);

  /* This is >= v3 specific. Using the newly configured service list, stage
   * them into our global state. Every object ownership is lost after. */
  hs_service_stage_services(service_list);
}
Exemplo n.º 2
0
/** Append to <b>out</b> all circuits in state OR_WAIT waiting for
 * the given connection. */
void
circuit_get_all_pending_on_or_conn(smartlist_t *out, or_connection_t *or_conn)
{
  tor_assert(out);
  tor_assert(or_conn);

  if (!circuits_pending_or_conns)
    return;

  SMARTLIST_FOREACH_BEGIN(circuits_pending_or_conns, circuit_t *, circ) {
    if (circ->marked_for_close)
      continue;
    if (!circ->n_hop)
      continue;
    tor_assert(circ->state == CIRCUIT_STATE_OR_WAIT);
    if (tor_digest_is_zero(circ->n_hop->identity_digest)) {
      /* Look at addr/port. This is an unkeyed connection. */
      if (!tor_addr_eq(&circ->n_hop->addr, &or_conn->_base.addr) ||
          circ->n_hop->port != or_conn->_base.port)
        continue;
    } else {
      /* We expected a key. See if it's the right one. */
      if (memcmp(or_conn->identity_digest,
                 circ->n_hop->identity_digest, DIGEST_LEN))
        continue;
    }
    smartlist_add(out, circ);
  } SMARTLIST_FOREACH_END(circ);
}
Exemplo n.º 3
0
/**
   Finish the configuration protocol version negotiation by printing
   whether we support any of the suggested configuration protocols in
   stdout, according to the 180 spec.

   Return:
   * 0: if we actually found and selected a protocol.
   * -1: if we couldn't find a common supported protocol or if we
     couldn't even parse tor's supported protocol list.

   XXX: in the future we should return the protocol version we
   selected. let's keep it simple for now since we have just one
   protocol version.
*/
static int
conf_proto_version_negotiation(const managed_proxy_t *proxy)
{
  int r=-1;

  smartlist_t *versions = smartlist_create();
  smartlist_split_string(versions, proxy->vars.conf_proto_version, ",",
                         SPLIT_SKIP_SPACE|SPLIT_IGNORE_BLANK, -1);

  SMARTLIST_FOREACH_BEGIN(versions, char *, version) {
    if (is_supported_conf_protocol(version)) {
      print_protocol_line("%s %s\n", PROTO_NEG_SUCCESS, version);
      r=0;
      goto done;
    }
  } SMARTLIST_FOREACH_END(version);

  /* we get here if we couldn't find a supported protocol */
  print_protocol_line("%s", PROTO_NEG_FAIL);

 done:
  SMARTLIST_FOREACH(versions, char *, cp, free(cp));
  smartlist_free(versions);

  return r;
}
Exemplo n.º 4
0
/** Return 1 iff <b>smartlist</b> contains a tor_addr_t structure
 * that is an IPv4 or IPv6 multicast address. Otherwise, return 0.
 */
static int
smartlist_contains_multicast_tor_addr(smartlist_t *smartlist)
{
  SMARTLIST_FOREACH_BEGIN(smartlist, tor_addr_t *, tor_addr) {
    if (tor_addr_is_multicast(tor_addr)) {
      return 1;
    }
  } SMARTLIST_FOREACH_END(tor_addr);

  return 0;
}
Exemplo n.º 5
0
/** Return 1 iff <b>smartlist</b> contains a tor_addr_t structure
 * that is NULL or the null tor_addr_t. Otherwise, return 0.
 */
static int
smartlist_contains_null_tor_addr(smartlist_t *smartlist)
{
  SMARTLIST_FOREACH_BEGIN(smartlist, tor_addr_t *, tor_addr) {
    if (tor_addr == NULL || tor_addr_is_null(tor_addr)) {
      return 1;
    }
  } SMARTLIST_FOREACH_END(tor_addr);

  return 0;
}
Exemplo n.º 6
0
/** Return 1 iff <b>smartlist</b> contains a tor_addr_t structure
 * that is an IPv6 address. Otherwise, return 0.
 */
static int
smartlist_contains_ipv6_tor_addr(smartlist_t *smartlist)
{
  SMARTLIST_FOREACH_BEGIN(smartlist, tor_addr_t *, tor_addr) {
    /* Since there's no tor_addr_is_v6, assume all non-v4s are v6 */
    if (!tor_addr_is_v4(tor_addr)) {
      return 1;
    }
  } SMARTLIST_FOREACH_END(tor_addr);

  return 0;
}
Exemplo n.º 7
0
/**
 * Helper: clear all entries from <b>cache</b> (but do not delete
 * any that aren't marked for removal
 */
static void
consensus_cache_clear(consensus_cache_t *cache)
{
  consensus_cache_delete_pending(cache, 0);

  SMARTLIST_FOREACH_BEGIN(cache->entries, consensus_cache_entry_t *, ent) {
    ent->in_cache = NULL;
    consensus_cache_entry_decref(ent);
  } SMARTLIST_FOREACH_END(ent);
  smartlist_free(cache->entries);
  cache->entries = NULL;
}
Exemplo n.º 8
0
/** Remove every entry of the transport list that was marked with
 * mark_transport_list if it has not subsequently been un-marked. */
void
sweep_transport_list(void)
{
  if (!transport_list)
    transport_list = smartlist_new();
  SMARTLIST_FOREACH_BEGIN(transport_list, transport_t *, t) {
    if (t->marked_for_removal) {
      SMARTLIST_DEL_CURRENT(transport_list, t);
      transport_free(t);
    }
  } SMARTLIST_FOREACH_END(t);
}
Exemplo n.º 9
0
/** Remove every entry of the bridge list that was marked with
 * mark_bridge_list if it has not subsequently been un-marked. */
void
sweep_bridge_list(void)
{
  if (!bridge_list)
    bridge_list = smartlist_new();
  SMARTLIST_FOREACH_BEGIN(bridge_list, bridge_info_t *, b) {
    if (b->marked_for_removal) {
      SMARTLIST_DEL_CURRENT(bridge_list, b);
      bridge_free(b);
    }
  } SMARTLIST_FOREACH_END(b);
}
Exemplo n.º 10
0
/** Look through the routerlist, and using the measured bandwidth cache count
 * how many measured bandwidths we know.  This is used to decide whether we
 * ever trust advertised bandwidths for purposes of assigning flags. */
void
dirserv_count_measured_bws(const smartlist_t *routers)
{
  /* Initialize this first */
  routers_with_measured_bw = 0;

  /* Iterate over the routerlist and count measured bandwidths */
  SMARTLIST_FOREACH_BEGIN(routers, const routerinfo_t *, ri) {
    /* Check if we know a measured bandwidth for this one */
    if (dirserv_has_measured_bw(ri->cache_info.identity_digest)) {
      ++routers_with_measured_bw;
    }
  } SMARTLIST_FOREACH_END(ri);
}
Exemplo n.º 11
0
/** Returns the transport in our transport list that has the name <b>name</b>.
 *  Else returns NULL. */
transport_t *
transport_get_by_name(const char *name)
{
  tor_assert(name);

  if (!transport_list)
    return NULL;

  SMARTLIST_FOREACH_BEGIN(transport_list, transport_t *, transport) {
    if (!strcmp(transport->name, name))
      return transport;
  } SMARTLIST_FOREACH_END(transport);

  return NULL;
}
Exemplo n.º 12
0
/**
 * Take a list of uint16_t *, and remove every port in the list from the
 * current list of predicted ports.
 */
void
rep_hist_remove_predicted_ports(const smartlist_t *rmv_ports)
{
  /* Let's do this on O(N), not O(N^2). */
  bitarray_t *remove_ports = bitarray_init_zero(UINT16_MAX);
  SMARTLIST_FOREACH(rmv_ports, const uint16_t *, p,
                    bitarray_set(remove_ports, *p));
  SMARTLIST_FOREACH_BEGIN(predicted_ports_list, predicted_port_t *, pp) {
    if (bitarray_is_set(remove_ports, pp->port)) {
      tor_free(pp);
      predicted_ports_total_alloc -= sizeof(*pp);
      SMARTLIST_DEL_CURRENT(predicted_ports_list, pp);
    }
  } SMARTLIST_FOREACH_END(pp);
  bitarray_free(remove_ports);
}
Exemplo n.º 13
0
/** We have a bug that I can't find. Sometimes, very rarely, cpuworkers get
 * stuck in the 'busy' state, even though the cpuworker process thinks of
 * itself as idle. I don't know why. But here's a workaround to kill any
 * cpuworker that's been busy for more than CPUWORKER_BUSY_TIMEOUT.
 */
static void
cull_wedged_cpuworkers(void)
{
  time_t now = time(NULL);
  smartlist_t *conns = get_connection_array();
  SMARTLIST_FOREACH_BEGIN(conns, connection_t *, conn) {
    if (!conn->marked_for_close &&
        conn->type == CONN_TYPE_CPUWORKER &&
        conn->state == CPUWORKER_STATE_BUSY_ONION &&
        conn->timestamp_lastwritten + CPUWORKER_BUSY_TIMEOUT < now) {
      log_notice(LD_BUG,
                 "closing wedged cpuworker. Can somebody find the bug?");
      num_cpuworkers_busy--;
      num_cpuworkers--;
      connection_mark_for_close(conn);
    }
  } SMARTLIST_FOREACH_END(conn);
}
Exemplo n.º 14
0
/* Validate the given service against all service in the given list. If the
 * service is ephemeral, this function ignores it. Services with the same
 * directory path aren't allowed and will return an error. If a duplicate is
 * found, 1 is returned else 0 if none found. */
static int
service_is_duplicate_in_list(const smartlist_t *service_list,
                             const hs_service_t *service)
{
  int ret = 0;

  tor_assert(service_list);
  tor_assert(service);

  /* Ephemeral service don't have a directory configured so no need to check
   * for a service in the list having the same path. */
  if (service->config.is_ephemeral) {
    goto end;
  }

  /* XXX: Validate if we have any service that has the given service dir path.
   * This has two problems:
   *
   * a) It's O(n^2), but the same comment from the bottom of
   *    rend_config_services() should apply.
   *
   * b) We only compare directory paths as strings, so we can't
   *    detect two distinct paths that specify the same directory
   *    (which can arise from symlinks, case-insensitivity, bind
   *    mounts, etc.).
   *
   * It also can't detect that two separate Tor instances are trying
   * to use the same HiddenServiceDir; for that, we would need a
   * lock file.  But this is enough to detect a simple mistake that
   * at least one person has actually made. */
  SMARTLIST_FOREACH_BEGIN(service_list, const hs_service_t *, s) {
    if (!strcmp(s->config.directory_path, service->config.directory_path)) {
      log_warn(LD_REND, "Another hidden service is already configured "
                        "for directory %s",
               escaped(service->config.directory_path));
      ret = 1;
      goto end;
    }
  } SMARTLIST_FOREACH_END(s);

 end:
  return ret;
}
Exemplo n.º 15
0
/** Helper to conduct tests for populate_live_entry_guards().

   This test adds some entry guards to our list, and then tests
   populate_live_entry_guards() to mke sure it filters them correctly.

   <b>num_needed</b> is the number of guard nodes we support. It's
   configurable to make sure we function properly with 1 or 3 guard
   nodes configured.
*/
static void
populate_live_entry_guards_test_helper(int num_needed)
{
  smartlist_t *our_nodelist = NULL;
  smartlist_t *live_entry_guards = smartlist_new();
  const smartlist_t *all_entry_guards = get_entry_guards();
  or_options_t *options = get_options_mutable();
  int retval;

  /* Set NumEntryGuards to the provided number. */
  options->NumEntryGuards = num_needed;
  tt_int_op(num_needed, OP_EQ, decide_num_guards(options, 0));

  /* The global entry guards smartlist should be empty now. */
  tt_int_op(smartlist_len(all_entry_guards), OP_EQ, 0);

  /* Walk the nodelist and add all nodes as entry guards. */
  our_nodelist = nodelist_get_list();
  tt_int_op(smartlist_len(our_nodelist), OP_EQ, NUMBER_OF_DESCRIPTORS);

  SMARTLIST_FOREACH_BEGIN(our_nodelist, const node_t *, node) {
    const node_t *node_tmp;
    node_tmp = add_an_entry_guard(node, 0, 1, 0, 0);
    tt_assert(node_tmp);
  } SMARTLIST_FOREACH_END(node);

  /* Make sure the nodes were added as entry guards. */
  tt_int_op(smartlist_len(all_entry_guards), OP_EQ, NUMBER_OF_DESCRIPTORS);

  /* Ensure that all the possible entry guards are enough to satisfy us. */
  tt_int_op(smartlist_len(all_entry_guards), OP_GE, num_needed);

  /* Walk the entry guard list for some sanity checking */
  SMARTLIST_FOREACH_BEGIN(all_entry_guards, const entry_guard_t *, entry) {
    /* Since we called add_an_entry_guard() with 'for_discovery' being
       False, all guards should have made_contact enabled. */
    tt_int_op(entry->made_contact, OP_EQ, 1);

    /* Since we don't have a routerstatus, all of the entry guards are
       not directory servers. */
    tt_int_op(entry->is_dir_cache, OP_EQ, 0);
  } SMARTLIST_FOREACH_END(entry);
Exemplo n.º 16
0
/**
    Given a smartlist of listener configs; launch them all and print
    method lines as appropriate.  Return 0 if at least a listener was
    spawned, -1 otherwise.
*/
static int
open_listeners_managed(const managed_proxy_t *proxy)
{
  int ret=-1;
  const char *transport;

  /* Open listeners for each configuration. */
  SMARTLIST_FOREACH_BEGIN(proxy->configs, config_t *, cfg) {
    transport = get_transport_name_from_config(cfg);

    if (open_listeners(get_event_base(), cfg)) {
      ret=0; /* success! launched at least one listener. */
      print_method_line(transport, proxy, cfg);
    } else { /* fail. print a method error line. */
      print_method_error_line(transport, proxy, ST_LAUNCH_FAIL_LSN);
    }
  } SMARTLIST_FOREACH_END(cfg);

  return ret;
}
Exemplo n.º 17
0
static int
test_conn_download_status_teardown(const struct testcase_t *tc, void *arg)
{
  (void)arg;
  int rv = 0;

  /* Ignore arg, and just loop through the connection array */
  SMARTLIST_FOREACH_BEGIN(get_connection_array(), connection_t *, conn) {
    if (conn) {
      assert_connection_ok(conn, time(NULL));

      /* connection_free_() cleans up requested_resource */
      rv = test_conn_get_rsrc_teardown(tc, conn);
      tt_assert(rv == 1);
    }
  } SMARTLIST_FOREACH_END(conn);

 done:
  return rv;
}
Exemplo n.º 18
0
/** As dirserv_get_routerdescs(), but instead of getting signed_descriptor_t
 * pointers, adds copies of digests to fps_out, and doesn't use the
 * /tor/server/ prefix.  For a /d/ request, adds descriptor digests; for other
 * requests, adds identity digests.
 */
int
dirserv_get_routerdesc_spool(smartlist_t *spool_out,
                             const char *key,
                             dir_spool_source_t source,
                             int conn_is_encrypted,
                             const char **msg_out)
{
  *msg_out = NULL;

  if (!strcmp(key, "all")) {
    const routerlist_t *rl = router_get_routerlist();
    SMARTLIST_FOREACH_BEGIN(rl->routers, const routerinfo_t *, r) {
      spooled_resource_t *spooled;
      spooled = spooled_resource_new(source,
                              (const uint8_t *)r->cache_info.identity_digest,
                              DIGEST_LEN);
      /* Treat "all" requests as if they were unencrypted */
      conn_is_encrypted = 0;
      smartlist_add(spool_out, spooled);
    } SMARTLIST_FOREACH_END(r);
  } else if (!strcmp(key, "authority")) {
Exemplo n.º 19
0
/** Append some EntryGuard lines to the Tor state at <b>state</b>.

   <b>entry_guard_lines</b> is a smartlist containing 2-tuple
   smartlists that carry the key and values of the statefile.
   As an example:
   entry_guard_lines =
     (("EntryGuard", "name 67E72FF33D7D41BF11C569646A0A7B4B188340DF DirCache"),
      ("EntryGuardDownSince", "2014-06-07 16:02:46 2014-06-07 16:02:46"))
*/
static void
state_insert_entry_guard_helper(or_state_t *state,
                                smartlist_t *entry_guard_lines)
{
  config_line_t **next, *line;

  next = &state->EntryGuards;
  *next = NULL;

  /* Loop over all the state lines in the smartlist */
  SMARTLIST_FOREACH_BEGIN(entry_guard_lines, const smartlist_t *,state_lines) {
    /* Get key and value for each line */
    const char *state_key = smartlist_get(state_lines, 0);
    const char *state_value = smartlist_get(state_lines, 1);

    *next = line = tor_malloc_zero(sizeof(config_line_t));
    line->key = tor_strdup(state_key);
    tor_asprintf(&line->value, "%s", state_value);
    next = &(line->next);
  } SMARTLIST_FOREACH_END(state_lines);
}
Exemplo n.º 20
0
/* Remove a directory and all of its subdirectories */
static void
rm_rf(const char *dir)
{
  struct stat st;
  smartlist_t *elements;

  elements = tor_listdir(dir);
  if (elements) {
    SMARTLIST_FOREACH_BEGIN(elements, const char *, cp) {
         char *tmp = NULL;
         tor_asprintf(&tmp, "%s"PATH_SEPARATOR"%s", dir, cp);
         if (0 == stat(tmp,&st) && (st.st_mode & S_IFDIR)) {
           rm_rf(tmp);
         } else {
           if (unlink(tmp)) {
             fprintf(stderr, "Error removing %s: %s\n", tmp, strerror(errno));
           }
         }
         tor_free(tmp);
    } SMARTLIST_FOREACH_END(cp);
    SMARTLIST_FOREACH(elements, char *, cp, tor_free(cp));
    smartlist_free(elements);
  }
Exemplo n.º 21
0
/** Return a newly allocated pointer to a list of uint16_t * for ports that
 * are likely to be asked for in the near future.
 */
smartlist_t *
rep_hist_get_predicted_ports(time_t now)
{
  int predicted_circs_relevance_time;
  smartlist_t *out = smartlist_new();
  tor_assert(predicted_ports_list);

  predicted_circs_relevance_time = (int)prediction_timeout;

  /* clean out obsolete entries */
  SMARTLIST_FOREACH_BEGIN(predicted_ports_list, predicted_port_t *, pp) {
    if (pp->time + predicted_circs_relevance_time < now) {
      log_debug(LD_CIRC, "Expiring predicted port %d", pp->port);

      predicted_ports_total_alloc -= sizeof(predicted_port_t);
      tor_free(pp);
      SMARTLIST_DEL_CURRENT(predicted_ports_list, pp);
    } else {
      smartlist_add(out, tor_memdup(&pp->port, sizeof(uint16_t)));
    }
  } SMARTLIST_FOREACH_END(pp);
  return out;
}
Exemplo n.º 22
0
/** Remember that <b>port</b> has been asked for as of time <b>now</b>.
 * This is used for predicting what sorts of streams we'll make in the
 * future and making exit circuits to anticipate that.
 */
void
rep_hist_note_used_port(time_t now, uint16_t port)
{
  tor_assert(predicted_ports_list);

  if (!port) /* record nothing */
    return;

  SMARTLIST_FOREACH_BEGIN(predicted_ports_list, predicted_port_t *, pp) {
    if (pp->port == port) {
      pp->time = now;

      last_prediction_add_time = now;
      log_info(LD_CIRC,
               "New port prediction added. Will continue predictive circ "
               "building for %d more seconds.",
               predicted_ports_prediction_time_remaining(now));
      return;
    }
  } SMARTLIST_FOREACH_END(pp);
  /* it's not there yet; we need to add it */
  add_predicted_port(now, port);
}
Exemplo n.º 23
0
/** Adjust the cell count of every active circuit on <b>chan</b> so
 * that they are scaled with respect to <b>cur_tick</b> */
static void
scale_active_circuits(ewma_policy_data_t *pol, unsigned cur_tick)
{
  double factor;

  tor_assert(pol);
  tor_assert(pol->active_circuit_pqueue);

  factor =
    get_scale_factor(
      pol->active_circuit_pqueue_last_recalibrated,
      cur_tick);
  /** Ordinarily it isn't okay to change the value of an element in a heap,
   * but it's okay here, since we are preserving the order. */
  SMARTLIST_FOREACH_BEGIN(
      pol->active_circuit_pqueue,
      cell_ewma_t *, e) {
    tor_assert(e->last_adjusted_tick ==
               pol->active_circuit_pqueue_last_recalibrated);
    e->cell_count *= factor;
    e->last_adjusted_tick = cur_tick;
  } SMARTLIST_FOREACH_END(e);
  pol->active_circuit_pqueue_last_recalibrated = cur_tick;
}
Exemplo n.º 24
0
/** Update the routerset's <b>countries</b> bitarray_t. Called whenever
 * the GeoIP IPv4 database is reloaded.
 */
void
routerset_refresh_countries(routerset_t *target)
{
  int cc;
  bitarray_free(target->countries);

  if (!geoip_is_loaded(AF_INET)) {
    target->countries = NULL;
    target->n_countries = 0;
    return;
  }
  target->n_countries = geoip_get_n_countries();
  target->countries = bitarray_init_zero(target->n_countries);
  SMARTLIST_FOREACH_BEGIN(target->country_names, const char *, country) {
    cc = geoip_get_country(country);
    if (cc >= 0) {
      tor_assert(cc < target->n_countries);
      bitarray_set(target->countries, cc);
    } else {
      log_warn(LD_CONFIG, "Country code '%s' is not recognized.",
          country);
    }
  } SMARTLIST_FOREACH_END(country);
}
Exemplo n.º 25
0
Arquivo: nodelist.c Projeto: houqp/tor
/** Tell the nodelist that the current usable consensus is <b>ns</b>.
 * This makes the nodelist change all of the routerstatus entries for
 * the nodes, drop nodes that no longer have enough info to get used,
 * and grab microdescriptors into nodes as appropriate.
 */
void
nodelist_set_consensus(networkstatus_t *ns)
{
  const or_options_t *options = get_options();
  int authdir = authdir_mode_v3(options);
  int client = !server_mode(options);

  init_nodelist();
  if (ns->flavor == FLAV_MICRODESC)
    (void) get_microdesc_cache(); /* Make sure it exists first. */

  SMARTLIST_FOREACH(the_nodelist->nodes, node_t *, node,
                    node->rs = NULL);

  SMARTLIST_FOREACH_BEGIN(ns->routerstatus_list, routerstatus_t *, rs) {
    node_t *node = node_get_or_create(rs->identity_digest);
    node->rs = rs;
    if (ns->flavor == FLAV_MICRODESC) {
      if (node->md == NULL ||
          tor_memneq(node->md->digest,rs->descriptor_digest,DIGEST256_LEN)) {
        if (node->md)
          node->md->held_by_nodes--;
        node->md = microdesc_cache_lookup_by_digest256(NULL,
                                                       rs->descriptor_digest);
        if (node->md)
          node->md->held_by_nodes++;
      }
    }

    node_set_country(node);

    /* If we're not an authdir, believe others. */
    if (!authdir) {
      node->is_valid = rs->is_valid;
      node->is_running = rs->is_flagged_running;
      node->is_fast = rs->is_fast;
      node->is_stable = rs->is_stable;
      node->is_possible_guard = rs->is_possible_guard;
      node->is_exit = rs->is_exit;
      node->is_bad_directory = rs->is_bad_directory;
      node->is_bad_exit = rs->is_bad_exit;
      node->is_hs_dir = rs->is_hs_dir;
      node->ipv6_preferred = 0;
      if (client && options->ClientPreferIPv6ORPort == 1 &&
          (tor_addr_is_null(&rs->ipv6_addr) == 0 ||
           (node->md && tor_addr_is_null(&node->md->ipv6_addr) == 0)))
        node->ipv6_preferred = 1;
    }

  } SMARTLIST_FOREACH_END(rs);

  nodelist_purge();

  if (! authdir) {
    SMARTLIST_FOREACH_BEGIN(the_nodelist->nodes, node_t *, node) {
      /* We have no routerstatus for this router. Clear flags so we can skip
       * it, maybe.*/
      if (!node->rs) {
        tor_assert(node->ri); /* if it had only an md, or nothing, purge
                               * would have removed it. */
        if (node->ri->purpose == ROUTER_PURPOSE_GENERAL) {
          /* Clear all flags. */
          node->is_valid = node->is_running = node->is_hs_dir =
            node->is_fast = node->is_stable =
            node->is_possible_guard = node->is_exit =
            node->is_bad_exit = node->is_bad_directory =
            node->ipv6_preferred = 0;
        }
      }
    } SMARTLIST_FOREACH_END(node);
  }
Exemplo n.º 26
0
/** Iterate over each of the supported <b>backends</b> and attempt to add a
 *  port forward for the port stored in <b>tor_fw_options</b>. */
static void
tor_fw_add_ports(tor_fw_options_t *tor_fw_options,
                 backends_t *backends)
{
    int i;
    int r = 0;
    int succeeded = 0;

    if (tor_fw_options->verbose)
        fprintf(stderr, "V: %s\n", __func__);

    /** Loop all ports that need to be forwarded, and try to use our
     *  backends for each port. If a backend succeeds, break the loop,
     *  report success and get to the next port. If all backends fail,
     *  report failure for that port. */
    SMARTLIST_FOREACH_BEGIN(tor_fw_options->ports_to_forward,
                            port_to_forward_t *, port_to_forward) {

        succeeded = 0;

        for (i=0; i<backends->n_backends; ++i) {
            if (tor_fw_options->verbose) {
                fprintf(stderr, "V: running backend_state now: %i\n", i);
                fprintf(stderr, "V: size of backend state: %u\n",
                        (int)(backends->backend_ops)[i].state_len);
                fprintf(stderr, "V: backend state name: %s\n",
                        (const char *) backends->backend_ops[i].name);
            }

            r =
                backends->backend_ops[i].add_tcp_mapping(port_to_forward->internal_port,
                        port_to_forward->external_port,
                        tor_fw_options->verbose,
                        backends->backend_state[i]);
            if (r == 0) { /* backend success */
                tor_fw_helper_report_port_fw_success(port_to_forward->internal_port,
                                                     port_to_forward->external_port,
                                                     backends->backend_ops[i].name);
                succeeded = 1;
                break;
            }

            fprintf(stderr, "tor-fw-helper: tor_fw_add_port backend %s "
                    "returned: %i\n",
                    (const char *) backends->backend_ops[i].name, r);
        }

        if (!succeeded) { /* all backends failed */
            char *list_of_backends_str = get_list_of_backends_string(backends);
            char *fail_msg = NULL;
            tor_asprintf(&fail_msg, "All port forwarding backends (%s) failed.",
                         list_of_backends_str);
            tor_fw_helper_report_port_fw_fail(port_to_forward->internal_port,
                                              port_to_forward->external_port,
                                              fail_msg);
            tor_free(list_of_backends_str);
            tor_free(fail_msg);
        }

    }
    SMARTLIST_FOREACH_END(port_to_forward);
}
Exemplo n.º 27
0
/** Look through the routerlist, the Mean Time Between Failure history, and
 * the Weighted Fractional Uptime history, and use them to set thresholds for
 * the Stable, Fast, and Guard flags.  Update the fields stable_uptime,
 * stable_mtbf, enough_mtbf_info, guard_wfu, guard_tk, fast_bandwidth,
 * guard_bandwidth_including_exits, and guard_bandwidth_excluding_exits.
 *
 * Also, set the is_exit flag of each router appropriately. */
void
dirserv_compute_performance_thresholds(digestmap_t *omit_as_sybil)
{
  int n_active, n_active_nonexit, n_familiar;
  uint32_t *uptimes, *bandwidths_kb, *bandwidths_excluding_exits_kb;
  long *tks;
  double *mtbfs, *wfus;
  smartlist_t *nodelist;
  time_t now = time(NULL);
  const or_options_t *options = get_options();

  /* Require mbw? */
  int require_mbw =
    (dirserv_get_last_n_measured_bws() >
     options->MinMeasuredBWsForAuthToIgnoreAdvertised) ? 1 : 0;

  /* initialize these all here, in case there are no routers */
  stable_uptime = 0;
  stable_mtbf = 0;
  fast_bandwidth_kb = 0;
  guard_bandwidth_including_exits_kb = 0;
  guard_bandwidth_excluding_exits_kb = 0;
  guard_tk = 0;
  guard_wfu = 0;

  nodelist_assert_ok();
  nodelist = nodelist_get_list();

  /* Initialize arrays that will hold values for each router.  We'll
   * sort them and use that to compute thresholds. */
  n_active = n_active_nonexit = 0;
  /* Uptime for every active router. */
  uptimes = tor_calloc(smartlist_len(nodelist), sizeof(uint32_t));
  /* Bandwidth for every active router. */
  bandwidths_kb = tor_calloc(smartlist_len(nodelist), sizeof(uint32_t));
  /* Bandwidth for every active non-exit router. */
  bandwidths_excluding_exits_kb =
    tor_calloc(smartlist_len(nodelist), sizeof(uint32_t));
  /* Weighted mean time between failure for each active router. */
  mtbfs = tor_calloc(smartlist_len(nodelist), sizeof(double));
  /* Time-known for each active router. */
  tks = tor_calloc(smartlist_len(nodelist), sizeof(long));
  /* Weighted fractional uptime for each active router. */
  wfus = tor_calloc(smartlist_len(nodelist), sizeof(double));

  /* Now, fill in the arrays. */
  SMARTLIST_FOREACH_BEGIN(nodelist, node_t *, node) {
    if (options->BridgeAuthoritativeDir &&
        node->ri &&
        node->ri->purpose != ROUTER_PURPOSE_BRIDGE)
      continue;

    routerinfo_t *ri = node->ri;
    if (ri) {
      node->is_exit = (!router_exit_policy_rejects_all(ri) &&
                       exit_policy_is_general_exit(ri->exit_policy));
    }

    if (router_counts_toward_thresholds(node, now, omit_as_sybil,
                                        require_mbw)) {
      const char *id = node->identity;
      uint32_t bw_kb;

      /* resolve spurious clang shallow analysis null pointer errors */
      tor_assert(ri);

      uptimes[n_active] = (uint32_t)real_uptime(ri, now);
      mtbfs[n_active] = rep_hist_get_stability(id, now);
      tks  [n_active] = rep_hist_get_weighted_time_known(id, now);
      bandwidths_kb[n_active] = bw_kb = dirserv_get_credible_bandwidth_kb(ri);
      if (!node->is_exit || node->is_bad_exit) {
        bandwidths_excluding_exits_kb[n_active_nonexit] = bw_kb;
        ++n_active_nonexit;
      }
      ++n_active;
    }
  } SMARTLIST_FOREACH_END(node);

  /* Now, compute thresholds. */
  if (n_active) {
    /* The median uptime is stable. */
    stable_uptime = median_uint32(uptimes, n_active);
    /* The median mtbf is stable, if we have enough mtbf info */
    stable_mtbf = median_double(mtbfs, n_active);
    /* The 12.5th percentile bandwidth is fast. */
    fast_bandwidth_kb = find_nth_uint32(bandwidths_kb, n_active, n_active/8);
    /* (Now bandwidths is sorted.) */
    if (fast_bandwidth_kb < RELAY_REQUIRED_MIN_BANDWIDTH/(2 * 1000))
      fast_bandwidth_kb = bandwidths_kb[n_active/4];
    guard_bandwidth_including_exits_kb =
      third_quartile_uint32(bandwidths_kb, n_active);
    guard_tk = find_nth_long(tks, n_active, n_active/8);
  }

  if (guard_tk > TIME_KNOWN_TO_GUARANTEE_FAMILIAR)
    guard_tk = TIME_KNOWN_TO_GUARANTEE_FAMILIAR;

  {
    /* We can vote on a parameter for the minimum and maximum. */
#define ABSOLUTE_MIN_VALUE_FOR_FAST_FLAG 4
    int32_t min_fast_kb, max_fast_kb, min_fast, max_fast;
    min_fast = networkstatus_get_param(NULL, "FastFlagMinThreshold",
      ABSOLUTE_MIN_VALUE_FOR_FAST_FLAG,
      ABSOLUTE_MIN_VALUE_FOR_FAST_FLAG,
      INT32_MAX);
    if (options->TestingTorNetwork) {
      min_fast = (int32_t)options->TestingMinFastFlagThreshold;
    }
    max_fast = networkstatus_get_param(NULL, "FastFlagMaxThreshold",
                                       INT32_MAX, min_fast, INT32_MAX);
    min_fast_kb = min_fast / 1000;
    max_fast_kb = max_fast / 1000;

    if (fast_bandwidth_kb < (uint32_t)min_fast_kb)
      fast_bandwidth_kb = min_fast_kb;
    if (fast_bandwidth_kb > (uint32_t)max_fast_kb)
      fast_bandwidth_kb = max_fast_kb;
  }
  /* Protect sufficiently fast nodes from being pushed out of the set
   * of Fast nodes. */
  if (options->AuthDirFastGuarantee &&
      fast_bandwidth_kb > options->AuthDirFastGuarantee/1000)
    fast_bandwidth_kb = (uint32_t)options->AuthDirFastGuarantee/1000;

  /* Now that we have a time-known that 7/8 routers are known longer than,
   * fill wfus with the wfu of every such "familiar" router. */
  n_familiar = 0;

  SMARTLIST_FOREACH_BEGIN(nodelist, node_t *, node) {
      if (router_counts_toward_thresholds(node, now,
                                          omit_as_sybil, require_mbw)) {
        routerinfo_t *ri = node->ri;
        const char *id = ri->cache_info.identity_digest;
        long tk = rep_hist_get_weighted_time_known(id, now);
        if (tk < guard_tk)
          continue;
        wfus[n_familiar++] = rep_hist_get_weighted_fractional_uptime(id, now);
      }
  } SMARTLIST_FOREACH_END(node);
  if (n_familiar)
    guard_wfu = median_double(wfus, n_familiar);
  if (guard_wfu > WFU_TO_GUARANTEE_GUARD)
    guard_wfu = WFU_TO_GUARANTEE_GUARD;

  enough_mtbf_info = rep_hist_have_measured_enough_stability();

  if (n_active_nonexit) {
    guard_bandwidth_excluding_exits_kb =
      find_nth_uint32(bandwidths_excluding_exits_kb,
                      n_active_nonexit, n_active_nonexit*3/4);
  }

  log_info(LD_DIRSERV,
      "Cutoffs: For Stable, %lu sec uptime, %lu sec MTBF. "
      "For Fast: %lu kilobytes/sec. "
      "For Guard: WFU %.03f%%, time-known %lu sec, "
      "and bandwidth %lu or %lu kilobytes/sec. "
      "We%s have enough stability data.",
      (unsigned long)stable_uptime,
      (unsigned long)stable_mtbf,
      (unsigned long)fast_bandwidth_kb,
      guard_wfu*100,
      (unsigned long)guard_tk,
      (unsigned long)guard_bandwidth_including_exits_kb,
      (unsigned long)guard_bandwidth_excluding_exits_kb,
      enough_mtbf_info ? "" : " don't");

  tor_free(uptimes);
  tor_free(mtbfs);
  tor_free(bandwidths_kb);
  tor_free(bandwidths_excluding_exits_kb);
  tor_free(tks);
  tor_free(wfus);
}