int main(void)
#endif
{
BYTE i;
static DWORD t = 0;
static DWORD dwLastIP = 0;
static UINT8 updateDisplay = 0;
#if defined (EZ_CONFIG_STORE)
static DWORD ButtonPushStart = 0;
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
UINT8 channelList[] = MY_DEFAULT_CHANNEL_LIST_PRESCAN; // WF_PRESCAN
tWFScanResult bssDesc;
#endif
// Initialize application specific hardware
InitializeBoard();
// Initiates board setup process if button is depressed
// on startup
if (BUTTON1_IO == 0u) {
while (BUTTON1_IO == 0);
SelfTestMode();
}
//#if defined(USE_LCD)
/*******************************************************************/
// Initialize the LCD
/*******************************************************************/
ConfigureLCD_SPI();
LCDInit();
/*******************************************************************/
// Display Start-up Splash Screen
/*******************************************************************/
LCDBacklightON();
LEDS_ON();
LCDErase();
sprintf((char *) LCDText, (char*) " MiWi - WiFi ");
sprintf((char *) &(LCDText[16]), (char*) " Gateway Demo");
LCDUpdate();
/*******************************************************************/
// Initialize the MiWi Protocol Stack. The only input parameter indicates
// if previous network configuration should be restored.
/*******************************************************************/
MiApp_ProtocolInit(FALSE);
/*******************************************************************/
// Set Device Communication Channel
/*******************************************************************/
if (MiApp_SetChannel(myChannel) == FALSE) {
LCDDisplay((char *) "ERROR: Unable to Set Channel..", 0, TRUE);
while (1);
}
/*******************************************************************/
// Set the connection mode. The possible connection modes are:
// ENABLE_ALL_CONN: Enable all kinds of connection
// ENABLE_PREV_CONN: Only allow connection already exists in
// connection table
// ENABL_ACTIVE_SCAN_RSP: Allow response to Active scan
// DISABLE_ALL_CONN: Disable all connections.
/*******************************************************************/
MiApp_ConnectionMode(ENABLE_ALL_CONN);
/*******************************************************************/
// Function MiApp_EstablishConnection try to establish a new
// connection with peer device.
// The first parameter is the index to the active scan result,
// which is acquired by discovery process (active scan). If
// the value of the index is 0xFF, try to establish a
// connection with any peer.
// The second parameter is the mode to establish connection,
// either direct or indirect. Direct mode means connection
// within the radio range; indirect mode means connection
// may or may not in the radio range.
/*******************************************************************/
i = MiApp_EstablishConnection(0xFF, CONN_MODE_DIRECT);
/*******************************************************************/
// Display current opertion on LCD of demo board, if applicable
/*******************************************************************/
if (i != 0xFF) {
; // Connected Peer on Channel
} else {
/*******************************************************************/
// If no network can be found and join, we need to start a new
// network by calling function MiApp_StartConnection
//
// The first parameter is the mode of start connection. There are
// two valid connection modes:
// - START_CONN_DIRECT start the connection on current
// channel
// - START_CONN_ENERGY_SCN perform an energy scan first,
// before starting the connection on
// the channel with least noise
// - START_CONN_CS_SCN perform a carrier sense scan
// first, before starting the
// connection on the channel with
// least carrier sense noise. Not
// supported for current radios
//
// The second parameter is the scan duration, which has the same
// definition in Energy Scan. 10 is roughly 1 second. 9 is a
// half second and 11 is 2 seconds. Maximum scan duration is
// 14, or roughly 16 seconds.
//
// The third parameter is the channel map. Bit 0 of the
// double word parameter represents channel 0. For the 2.4GHz
// frequency band, all possible channels are channel 11 to
// channel 26. As the result, the bit map is 0x07FFF800. Stack
// will filter out all invalid channels, so the application
// only needs to pay attention to the channels that are not
// preferred.
/*******************************************************************/
MiApp_StartConnection(START_CONN_DIRECT, 10, 0);
}
// Turn OFF LCD after setting up MiWi Connection
LCDBacklightOFF();
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
dwLastIP = AppConfig.MyIPAddr.Val;
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined ( EZ_CONFIG_SCAN )
WFInitScan();
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// WF_PRESCAN: Pre-scan before starting up as SoftAP mode
WF_CASetScanType(MY_DEFAULT_SCAN_TYPE);
WF_CASetChannelList(channelList, sizeof (channelList));
if (WFStartScan() == WF_SUCCESS) {
SCAN_SET_DISPLAY(SCANCXT.scanState);
SCANCXT.displayIdx = 0;
//putsUART("main: Prescan WFStartScan() success ................. \r\n");
}
// Needed to trigger g_scan_done
WFRetrieveScanResult(0, &bssDesc);
#else
#if defined(WF_CS_TRIS)
WF_Connect();
#endif // defined(WF_CS_TRIS)
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) AppConfig.NetBIOSName, // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *) "path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
#if defined(WF_CONSOLE)
WFConsoleInit();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
LEDS_OFF();
while (1) {
/*******************************************************************/
// Check Button Events
/*******************************************************************/
if (BUTTON1_IO == 0u) {
while (BUTTON1_IO == 0);
LCDErase();
sprintf((char *) LCDText, (char*) "Erase Room Info?");
sprintf((char *) &(LCDText[16]), (char*) "SW0:Yes SW2:No");
LCDUpdate();
while (1) {
if (BUTTON1_IO == 0u) {
while (BUTTON1_IO == 0);
LCDDisplay((char *) "STATUS: Erasing...", 0, TRUE);
EraseRoomInfo();
DisplaySSID();
break;
} else if (BUTTON2_IO == 0u) {
while (BUTTON2_IO == 0);
DisplaySSID();
break;
}
}
}
// Blink LED0 twice per sec when unconfigured, once per sec after config
if ((TickGet() - t >= TICK_SECOND / (4ul - (CFGCXT.isWifiDoneConfigure * 2ul)))) {
t = TickGet();
LED0_INV();
}
if(CFGCXT.isWifiNeedToConfigure) updateDisplay = 1;
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
if (g_scan_done) {
if (g_prescan_waiting) {
SCANCXT.displayIdx = 0;
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) {
WFDisplayScanMgr();
}
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
DisplaySSID();
g_scan_done = 0;
g_prescan_waiting = 0;
}
}
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
WiFiTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(WF_CONSOLE)
//WFConsoleProcess();
// #if !defined(STACK_USE_EZ_CONFIG)
// IperfAppCall();
// #endif
//WFConsoleProcessEpilogue();
wait_console_input:
#endif
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
//PingConsole();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if (gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined ( WF_CONSOLE ) && defined ( EZ_CONFIG_SCAN )
WFDisplayScanMgr();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
if((updateDisplay && CFGCXT.isWifiDoneConfigure) || (dwLastIP != AppConfig.MyIPAddr.Val))
{
if(dwLastIP != AppConfig.MyIPAddr.Val)
dwLastIP = AppConfig.MyIPAddr.Val;
if(updateDisplay && CFGCXT.isWifiDoneConfigure)
updateDisplay = 0;
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
DisplaySSID();
}
}
}
//
// Main application entry point.
//
int main(void)
{
#if defined(APP_USE_IPERF)
static uint8_t iperfOk = 0;
#endif
static SYS_TICK startTick = 0;
static IP_ADDR dwLastIP[sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION)];
uint8_t i;
// perform system initialization
if(!SYS_Initialize())
{
return 0;
}
SYS_CONSOLE_MESSAGE("\r\n\n\n --- Unified TCPIP Demo Starts! --- \r\n");
SYS_OUT_MESSAGE("TCPStack " TCPIP_STACK_VERSION " "" ");
#if defined(TCPIP_STACK_USE_MPFS) || defined(TCPIP_STACK_USE_MPFS2)
MPFSInit();
#endif
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(TCPIP_STACK_USE_STORAGE) && (defined(SPIFLASH_CS_TRIS) || defined(EEPROM_CS_TRIS))
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
SYS_TICK StartTime = SYS_TICK_Get();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(SYS_TICK_Get() - StartTime > 4*SYS_TICK_TicksPerSecondGet())
{
TCPIP_STORAGE_HANDLE hStorage;
// just in case we execute this before the stack is initialized
TCPIP_STORAGE_Init(0);
hStorage = TCPIP_STORAGE_Open(0, false); // no refresh actually needed
if(hStorage)
{
TCPIP_STORAGE_Erase(hStorage);
SYS_CONSOLE_MESSAGE("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
TCPIP_STORAGE_Close(hStorage);
}
else
{
SYS_ERROR(SYS_ERROR_WARN, "\r\n\r\nCould not restore the default settings!!!.\r\n\r\n");
}
TCPIP_STORAGE_DeInit(0);
LED_PUT(0x0F);
// wait 4.5 seconds here then reset
while((SYS_TICK_Get() - StartTime) <= (9*SYS_TICK_TicksPerSecondGet()/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
SYS_Reboot();
break;
}
}
#endif // defined(TCPIP_STACK_USE_STORAGE) && (defined(SPIFLASH_CS_TRIS) || defined(EEPROM_CS_TRIS))
}
// Initialize the TCPIP stack
if(!TCPIP_STACK_Init(TCPIP_HOSTS_CONFIGURATION, sizeof(TCPIP_HOSTS_CONFIGURATION)/sizeof(*TCPIP_HOSTS_CONFIGURATION),
TCPIP_STACK_MODULE_CONFIG_TBL, sizeof(TCPIP_STACK_MODULE_CONFIG_TBL)/sizeof(*TCPIP_STACK_MODULE_CONFIG_TBL) ))
{
return 0;
}
#if defined(TCPIP_STACK_USE_TELNET_SERVER)
TelnetRegisterCallback(ProcessIO);
#endif // defined(TCPIP_STACK_USE_TELNET_SERVER)
#if defined (TCPIP_STACK_USE_IPV6)
TCPIP_ICMPV6_RegisterCallback (ICMPv6Callback);
#endif
#if defined(TCPIP_STACK_USE_ICMP_CLIENT) || defined(TCPIP_STACK_USE_ICMP_SERVER)
ICMPRegisterCallback (PingProcessIPv4);
#endif
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
TCPIP_NET_HANDLE hWiFi = TCPIP_STACK_NetHandle("MRF24W");
if(hWiFi)
{
TCPIP_STACK_SetNotifyEvents(hWiFi, TCPIP_EV_RX_ALL|TCPIP_EV_TX_ALL|TCPIP_EV_RXTX_ERRORS);
TCPIP_STACK_SetNotifyHandler(hWiFi, StackNotification, 0);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
#if defined(APP_USE_IPERF)
IperfConsoleInit();
iperfOk = IperfAppInit(TCPIP_HOSTS_CONFIGURATION[0].interface);
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
// Blink LED0 (right most one) every second.
if(SYS_TICK_Get() - startTick >= SYS_TICK_TicksPerSecondGet()/2ul)
{
startTick = SYS_TICK_Get();
LED0_IO ^= 1;
}
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
TCPIP_STACK_Task();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(TCPIP_STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(TCPIP_STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(TCPIP_STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(TCPIP_STACK_USE_ICMP_CLIENT) || defined (TCPIP_STACK_USE_ICMP_SERVER) || defined (TCPIP_STACK_USE_IPV6)
// use ping on the default interface
PingDemoTask();
#endif
#if defined(TCPIP_STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(TCPIP_STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo(0);
#endif
#if defined(APP_USE_IPERF)
IperfConsoleProcess();
if (iperfOk) IperfAppCall(); // Only running in case of init succeed
IperfConsoleProcessEpilogue();
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the console display, UART, and Announce
// service
// We use the default interface
for (i = 0; i < sizeof(TCPIP_HOSTS_CONFIGURATION)/sizeof(*TCPIP_HOSTS_CONFIGURATION); i++)
{
TCPIP_NET_HANDLE netH = TCPIP_STACK_NetHandle(TCPIP_HOSTS_CONFIGURATION[i].interface);
if((uint32_t)dwLastIP[i].Val != TCPIP_STACK_NetAddress(netH))
{
dwLastIP[i].Val = TCPIP_STACK_NetAddress(netH);
SYS_CONSOLE_MESSAGE(TCPIP_HOSTS_CONFIGURATION[i].interface);
SYS_CONSOLE_MESSAGE(" new IP Address: ");
DisplayIPValue(dwLastIP[i]);
SYS_CONSOLE_MESSAGE("\r\n");
}
}
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
if(stackNotifyCnt)
{
stackNotifyCnt = 0;
ProcessNotification(stackNotifyHandle);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
}
}
/*****************************************************************************
FUNCTION TCPIPTask
Main function to handle the TCPIP stack
RETURNS None
PARAMS None
*****************************************************************************/
void TCPIPTask()
{
WFConnection = WF_CUSTOM;
ConnectionProfileID = 0;
static DWORD dwLastIP = 0;
WFStatus = NOT_CONNECTED;
dwLastIP = 0;
// Function pointers for the callback function of the TCP/IP and WiFi stack
#if defined (FLYPORT)
FP[1] = cWFConnect;
FP[2] = cWFDisconnect;
FP[3] = cWFScan;
FP[5] = cWFPsPollDisable;
FP[6] = cWFPsPollEnable;
FP[7] = cWFScanList;
FP[10] = cWFStopConnecting;
#endif
#if defined (FLYPORTETH)
FP[1] = cETHRestart;
#endif
FP[16] = cTCPRxFlush;
FP[17] = cTCPpRead;
FP[18] = cTCPRemote;
FP[19] = cTCPServerDetach;
FP[20] = cTCPGenericOpen;
FP[21] = cTCPRead;
FP[22] = cTCPWrite;
FP[23] = cTCPGenericClose;
FP[24] = cTCPisConn;
FP[25] = cTCPRxLen;
#if defined(STACK_USE_SMTP_CLIENT)
FP[26] = cSMTPStart;
FP[27] = cSMTPSetServer;
FP[28] = cSMTPSetMsg;
FP[29] = cSMTPSend;
FP[30] = cSMTPBusy;
FP[31] = cSMTPStop;
FP[32] = cSMTPReport;
#endif
FP[ARP_RESOLVE] = cARPResolveMAC;
#if MAX_UDP_SOCKETS_FREERTOS>0
FP[35] = cUDPGenericOpen;
FP[36] = cUDPWrite;
FP[37] = cUDPGenericClose;
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
// Initialization of tick only at the startup of the device
if (hFlyTask == NULL)
{
TickInit();
}
#if defined(STACK_USE_MPFS) || defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initialize core stack layers (MAC, ARP, TCP, UDP) and application modules (HTTP, SNMP, etc.)
StackInit();
if (hFlyTask == NULL)
{
NETConf[0] = AppConfig;
NETConf[1] = AppConfig;
}
#if defined(WF_CS_TRIS)
if (WFStatus == CONNECTION_LOST)
WF_Connect(WFConnection);
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
// INITIALIZING UDP
#if MAX_UDP_SOCKETS_FREERTOS>0
#if defined (STACK_USE_UART)
UARTWrite(1, "Initializing UDP...\r\n");
#endif
UDPInit();
activeUdpSocket=0;
while (activeUdpSocket < MAX_UDP_SOCKETS_FREERTOS)
{
tmp_len[activeUdpSocket]=0;
if (activeUdpSocket == 0)
{
BUFFER_UDP_LEN[0] = BUFFER1_UDP_LEN;
udpBuffer[activeUdpSocket] = udpBuffer1;
udpSocket[0] = INVALID_UDP_SOCKET;
}
#if MAX_UDP_SOCKETS_FREERTOS>1
if (activeUdpSocket == 1)
{
BUFFER_UDP_LEN[1] = BUFFER2_UDP_LEN;
udpBuffer[activeUdpSocket] = udpBuffer2;
udpSocket[1] = INVALID_UDP_SOCKET;
}
#endif
#if MAX_UDP_SOCKETS_FREERTOS>2
if (activeUdpSocket == 2)
{
BUFFER_UDP_LEN[2] = BUFFER3_UDP_LEN;
udpBuffer[activeUdpSocket] = udpBuffer3;
udpSocket[2] = INVALID_UDP_SOCKET;
}
#endif
#if MAX_UDP_SOCKETS_FREERTOS>3
if (activeUdpSocket == 3)
{
BUFFER_UDP_LEN[3] = BUFFER4_UDP_LEN;
udpBuffer[activeUdpSocket] = udpBuffer4;
udpSocket[3] = INVALID_UDP_SOCKET;
}
#endif
p_udp_wifiram[activeUdpSocket] = udpBuffer[activeUdpSocket];
p_udp_data[activeUdpSocket] = udpBuffer[activeUdpSocket];
activeUdpSocket++;
}
#endif
if (hFlyTask == NULL)
{
// Creates the task dedicated to user code
xTaskCreate(FlyportTask,(signed char*) "FLY" , (configMINIMAL_STACK_SIZE * 4),
NULL, tskIDLE_PRIORITY + 1, &hFlyTask);
}
//-------------------------------------------------------------------------------------------
//| --- COOPERATIVE MULTITASKING LOOP --- |
//-------------------------------------------------------------------------------------------
while(1)
{
#if defined (FLYPORT)
if (WFStatus != TURNED_OFF)
{
// Check to verify the connection. If it's lost or failed, the device tries to reconnect
if ((WFStatus == CONNECTION_LOST) || (WFStatus == CONNECTION_FAILED))
WF_Connect(WFConnection);
#else
{
#endif
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
vTaskSuspendAll();
StackTask();
xTaskResumeAll();
#if defined(STACK_USE_HTTP_SERVER) || defined(STACK_USE_HTTP2_SERVER)
vTaskSuspendAll();
HTTPServer();
xTaskResumeAll();
#endif
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
// Check on the queue to verify if other task have requested some stack function
xStatus = xQueueReceive(xQueue,&Cmd,0);
CmdCheck();
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
UARTWrite(1,"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
UARTWrite(1,"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
} //end check turnoff
}
}
int main(void)
#endif
{
// static DWORD t = 0;
static DWORD dwLastIP = 0;
#if defined (EZ_CONFIG_STORE)
// static DWORD ButtonPushStart = 0;
#endif
// Initialize application specific hardware
InitializeBoard();
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
MPFSInit();
InitDataBuffers();
Slave_SpiInit();
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
/*
#if defined (WIFI_BOARD_FOC_HUB)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#else
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
#endif
*/
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined ( EZ_CONFIG_SCAN )
WFInitScan();
#endif
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
/*
#if defined (EZ_CONFIG_STORE)
// Hold button3 for 4 seconds to reset to defaults.
if (BUTTON3_IO == 0u) { // Button is pressed
if (ButtonPushStart == 0) //Just pressed
ButtonPushStart = TickGet();
else
if(TickGet() - ButtonPushStart > 4*TICK_SECOND)
RestoreWifiConfig();
}
else
{
ButtonPushStart = 0; //Button release reset the clock
}
if (AppConfig.saveSecurityInfo)
{
// set true by WF_ProcessEvent after connecting to a new network
// get the security info, and if required, push the PSK to EEPROM
if ((AppConfig.SecurityMode == WF_SECURITY_WPA_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA2_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA_AUTO_WITH_PASS_PHRASE))
{
// only need to save when doing passphrase
tWFCPElements profile;
UINT8 connState;
UINT8 connID;
WF_CMGetConnectionState(&connState, &connID);
WF_CPGetElements(connID, &profile);
memcpy((char*)AppConfig.SecurityKey, (char*)profile.securityKey, 32);
AppConfig.SecurityMode--; // the calc psk is exactly one below for each passphrase option
AppConfig.SecurityKeyLength = 32;
SaveAppConfig(&AppConfig);
}
AppConfig.saveSecurityInfo = FALSE;
}
#endif // EZ_CONFIG_STORE
#if defined (STACK_USE_EZ_CONFIG)
// Blink LED0 twice per sec when unconfigured, once per sec after config
if((TickGet() - t >= TICK_SECOND/(4ul - (CFGCXT.isWifiDoneConfigure*2ul))))
#else
// Blink LED0 (right most one) every second.
if(TickGet() - t >= TICK_SECOND/2ul)
#endif // STACK_USE_EZ_CONFIG
{
t = TickGet();
LED0_IO ^= 1;
}
*/
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
// Process command received from Motherboad via SPI interface.
//ProcessReceivedSpiCmds();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined (WIFI_BOARD_FOC_HUB)
ProcessWiFiTransfers(); // Handles TCP/IP transfers
DoWiFiWork(); // Handles SPI incoming requests
#endif
#if defined(WF_CONSOLE)
WFConsoleProcess();
IperfAppCall();
WFConsoleProcessEpilogue();
#endif
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined ( WF_CONSOLE ) && defined ( EZ_CONFIG_SCAN )
WFDisplayScanMgr();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
WiFiInfo.CurrentConfigPtr->MyIPAddr.Val = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
}
}
int main(void)
#endif
{
static DWORD t = 0;
static DWORD dwLastIP = 0;
#if defined (EZ_CONFIG_STORE)
static DWORD ButtonPushStart = 0;
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
UINT8 channelList[] = MY_DEFAULT_CHANNEL_LIST_PRESCAN; // WF_PRESCAN
tWFScanResult bssDesc;
#endif
// Initialize application specific hardware
InitializeBoard();
#if defined(USE_LCD)
// Initialize and display the stack version on the LCD
LCDInit();
DelayMs(100);
strcpypgm2ram((char*)LCDText, "TCPStack " TCPIP_STACK_VERSION " "
" ");
LCDUpdate();
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined ( EZ_CONFIG_SCAN )
WFInitScan();
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// WF_PRESCAN: Pre-scan before starting up as SoftAP mode
WF_CASetScanType(MY_DEFAULT_SCAN_TYPE);
WF_CASetChannelList(channelList, sizeof(channelList));
if (WFStartScan() == WF_SUCCESS)
{
SCAN_SET_DISPLAY(SCANCXT.scanState);
SCANCXT.displayIdx = 0;
//putsUART("main: Prescan WFStartScan() success ................. \r\n");
}
// Needed to trigger g_scan_done
WFRetrieveScanResult(0, &bssDesc);
#else
#if defined(WF_CS_TRIS)
WF_Connect();
#endif // defined(WF_CS_TRIS)
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
#if defined(STACK_USE_TCP_MOBILE_APP_SERVER)
mDNSServiceRegister(
(const char *) "HomeControlServer", // base name of the service
"_home-control._tcp.local", // type of the service
27561, // TCP or UDP port, at which this service is available
((const BYTE *)"control home devices"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
#else /* !defined(STACK_USE_TCP_MOBILE_APP_SERVER) */
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
#endif /* defined(STACK_USE_TCP_MOBILE_APP_SERVER) */
mDNSMulticastFilterRegister();
#endif
#if defined(WF_CONSOLE)
WFConsoleInit();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
if (g_scan_done) {
if (g_prescan_waiting) {
putrsUART((ROM char*)"\n SoftAP prescan results ........ \r\n\n");
SCANCXT.displayIdx = 0;
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) {
WFDisplayScanMgr();
}
putrsUART((ROM char*)"\r\n ");
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
g_scan_done = 0;
g_prescan_waiting = 0;
}
}
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
#if defined(WF_PRE_SCAN_IN_ADHOC)
if(g_prescan_adhoc_done)
{
WFGetScanResults();
g_prescan_adhoc_done = 0;
}
#endif
#if defined (EZ_CONFIG_STORE)
// Hold button3 for 4 seconds to reset to defaults.
if (BUTTON3_IO == 0u) { // Button is pressed
if (ButtonPushStart == 0) //Just pressed
ButtonPushStart = TickGet();
else
if(TickGet() - ButtonPushStart > 4*TICK_SECOND)
RestoreWifiConfig();
}
else
{
ButtonPushStart = 0; //Button release reset the clock
}
if (AppConfig.saveSecurityInfo)
{
// set true by WF_ProcessEvent after connecting to a new network
// get the security info, and if required, push the PSK to EEPROM
if ((AppConfig.SecurityMode == WF_SECURITY_WPA_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA2_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA_AUTO_WITH_PASS_PHRASE))
{
// only need to save when doing passphrase
tWFCPElements profile;
UINT8 connState;
UINT8 connID;
WF_CMGetConnectionState(&connState, &connID);
WF_CPGetElements(connID, &profile);
memcpy((char*)AppConfig.SecurityKey, (char*)profile.securityKey, 32);
AppConfig.SecurityMode--; // the calc psk is exactly one below for each passphrase option
AppConfig.SecurityKeyLength = 32;
SaveAppConfig(&AppConfig);
}
AppConfig.saveSecurityInfo = FALSE;
}
#endif // EZ_CONFIG_STORE
#if defined (STACK_USE_EZ_CONFIG)
// Blink LED0 twice per sec when unconfigured, once per sec after config
if((TickGet() - t >= TICK_SECOND/(4ul - (CFGCXT.isWifiDoneConfigure*2ul))))
#else
// Blink LED0 (right most one) every second.
if(TickGet() - t >= TICK_SECOND/2ul)
#endif // STACK_USE_EZ_CONFIG
{
t = TickGet();
LED0_IO ^= 1;
}
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(WF_CONSOLE)
WFConsoleProcess();
WFConsoleProcessEpilogue();
#endif
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_TCP_MOBILE_APP_SERVER)
MobileTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
PingConsole();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
}
}
//
// Main application entry point.
//
int main(void)
{
static TICK t = 0;
static DWORD dwLastIP = 0;
// Initialize application specific hardware
InitializeBoard();
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
MPFSInit();
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
//************** PIC32-WEB ********************
//***** Additional initializations Start: *****
// 1. UART1
USART_Init(115200,(GetPeripheralClock()));
USART_Test_Menu_Begin();
// 2. Timer1
// configure Timer 1 using external clock(32768Hz), 1:1 prescale,
// period 0x8000, thus set interrupt on every 1sec
// Blink LED0 (right most one) with frequency 2Hz at every one Timer1 interrupt.
OpenTimer1(T1_ON | T1_SOURCE_EXT | T1_PS_1_1, 0x8000);
// set up the timer interrupt with a priority of 3
ConfigIntTimer1(T1_INT_ON | T1_INT_PRIOR_3);
//CloseTimer1(); // Switches off the Timer1
mPORTASetPinsDigitalOut(BIT_2); // Set RA2 like out -> LED1
// 3. Enable interrupts at the end of initialization
// enable multi-vector interrupts
INTEnableSystemMultiVectoredInt();
//***** Additional initializations End: *****
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1){
// Run all enabled web demo applications:
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
SNMPTrapDemo();
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
ProcessIO();
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
}
}
}
int main(void)
#endif
{
static DWORD t = 0;
static DWORD dwLastIP = 0;
#if defined(WF_USE_POWER_SAVE_FUNCTIONS)
BOOL PsPollEnabled;
BOOL psConfDone = FALSE;
#endif
// Initialize application specific hardware
InitializeBoard();
#if defined(USE_LCD)
// Initialize and display the stack version on the LCD
LCDInit();
DelayMs(100);
strcpypgm2ram((char*)LCDText, "TCPStack " TCPIP_STACK_VERSION " "
" ");
LCDUpdate();
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
//while (1)
/*{
if(BUTTON0_IO == 0u && LED0_IO == 0)
{
LED0_IO =1;
}
if(BUTTON0_IO == 0u && LED0_IO ==1)
{
LED0_IO =0;
}
}*/
#if defined(WF_USE_POWER_SAVE_FUNCTIONS)
if (!psConfDone && WFisConnected()) {
PsPollEnabled = (MY_DEFAULT_PS_POLL == WF_ENABLED);
if (!PsPollEnabled) {
/* disable low power (PS-Poll) mode */
#if defined(STACK_USE_UART)
putrsUART("Disable PS-Poll\r\n");
#endif
WF_PsPollDisable();
} else {
/* Enable low power (PS-Poll) mode */
#if defined(STACK_USE_UART)
putrsUART("Enable PS-Poll\r\n");
#endif
WF_PsPollEnable(TRUE);
}
psConfDone = TRUE;
}
#endif
// Blink LED0 (right most one) every second.
// if(TickGet() - t >= TICK_SECOND/2ul)
// {
// t = TickGet();
// LED0_IO ^= 1;
// }
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
ProcessIO();
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
}
}
int main(void)
#endif
{
unsigned char counter = 0;
static DWORD Ping_Start_Time = 0;
static unsigned char Ping_Counter = 0;
static DWORD t = 0;
static DWORD dwLastIP = 0;
LED0_TRIS = 0;
LED0_IO = 1;
Delay10KTCYx(0);
// Initialize application specific hardware
InitializeBoard();
#ifdef APP_USE_USB
InitializeUSB();
#if defined(USB_INTERRUPT)
USBDeviceAttach();
#endif
#endif
#if defined(USE_LCD)
// Initialize and display the stack version on the LCD
LCDInit();
DelayMs(100);
strcpypgm2ram((char*)LCDText, "TCPStack " VERSION " "
" ");
LCDUpdate();
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS) || defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
#ifdef TRANSCEIVER_BOARD
#elif defined( SINGLEPHASEMETER_MCU1 )
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#else
#error "No board defined."
#endif
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#ifdef SINGLEPHASEMETER_MCU1
MCUOpen();
#endif
#ifdef APP_USE_ZIGBEE
ZigbeeOpen();
#else
//#error no zigbee.
#endif
#ifdef APP_USE_RGB
OpenRGB();
#endif
// ROUTER CODES
#ifdef APP_USE_ROUTER_CODES
{
}
#endif
// END
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
#ifdef SINGLEPHASEMETER_MCU1
MCUTasks();
#endif
#ifdef APP_USE_RGB
RGBTasks();
#endif
/**********************************************/
/**** Handle USB ******************************/
/**********************************************/
#if defined(USB_POLLING)
// Check bus status and service USB interrupts.
USBDeviceTasks(); // Interrupt or polling method. If using polling, must call
// this function periodically. This function will take care
// of processing and responding to SETUP transactions
// (such as during the enumeration process when you first
// plug in). USB hosts require that USB devices should accept
// and process SETUP packets in a timely fashion. Therefore,
// when using polling, this function should be called
// frequently (such as once about every 100 microseconds) at any
// time that a SETUP packet might reasonably be expected to
// be sent by the host to your device. In most cases, the
// USBDeviceTasks() function does not take very long to
// execute (~50 instruction cycles) before it returns.
#endif
// Application-specific tasks.
// Application related code may be added here, or in the ProcessIO() function.
ProcessUSBIO();
/**********************************************/
/**** Handle Zigbee ******************************/
/**********************************************/
#ifdef APP_USE_ZIGBEE
ZigbeeTasks();
{
if( counter++ > 200 )
{
char s[16] = {0x10, 0x01, 0, 0, 0, 0, 0, 0, 0xff, 0xfe, 0xff, 0xfe, 0, 0, 'A', '4'}; // , 0x64};
ZigbeeAPISendString(16, s);
counter = 0;
}
}
#endif
// Main program loop.
// Set up ping and node statuses. A ping is sent every 4 mins and a check is done every minute.
// Nodes that have not pinged within 5 min frame will be delisted as in the network.
if( Ping_Start_Time != 0 && (TickGet() - Ping_Start_Time) > (TICK_MINUTE) )
{
// Check nodes that have not sent their ping within the past 5 minutes.
{}
// Send out a ping if 4 minutes have lapsed.
if( Ping_Counter++ >= 4 )
{}
}
Ping_Start_Time = TickGet();
// Blink LED0 (right most one) every second.
if(TickGet() - t >= TICK_SECOND/2ul)
{
t = TickGet();
LED0_IO ^= 1;
}
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
SNMPTrapDemo();
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
#ifdef APP_USE_RGB
RGBTasks();
#endif
//ProcessIO();
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
}
}
}
