/**
* Deactivate a BAM DMA pipe
*
* This function deactivates a BAM DMA pipe.
*
* @dev - pointer to BAM-DMA device descriptor
*
* @bam - pointer to BAM device descriptor
*
* @pipe_index - pipe index
*
* @return 0 on success, negative value on error
*
*/
static int sps_dma_deactivate_pipe_atomic(struct bamdma_device *dev,
struct sps_bam *bam,
u32 pipe_index)
{
u32 channel;
if (dev->bam != bam)
return SPS_ERROR;
if (pipe_index >= dev->num_pipes)
return SPS_ERROR;
if (dev->pipes[pipe_index] != PIPE_ACTIVE)
return SPS_ERROR; /* Pipe is not active */
SPS_DBG("BAM-DMA: deactivate pipe %d", pipe_index);
/* Mark pipe inactive */
dev->pipes[pipe_index] = PIPE_INACTIVE;
/*
* Channel must be reset when either pipe is disabled, so just always
* reset regardless of other pipe's state
*/
channel = pipe_index / 2;
dma_write_reg_field(dev->virt_addr, DMA_CHNL_CONFIG(channel),
DMA_CHNL_ENABLE, 0);
/* If the peer pipe is also inactive, reset the channel */
if (sps_dma_check_pipes(dev, pipe_index) == DMA_PIPES_BOTH_DISABLED) {
/* Free channel if allocated internally */
if (dev->chans[channel].state == DMA_CHAN_STATE_ALLOC_INT)
dev->chans[channel].state = DMA_CHAN_STATE_FREE;
}
return 0;
}
/**
* Enable a BAM DMA pipe
*
*/
int sps_dma_pipe_enable(void *bam_arg, u32 pipe_index)
{
struct sps_bam *bam = bam_arg;
struct bamdma_device *dev;
struct bamdma_chan *chan;
u32 channel;
int result = SPS_ERROR;
SPS_DBG("sps_dma_pipe_enable.pipe %d", pipe_index);
mutex_lock(&bam_dma_lock);
dev = sps_dma_find_device((u32) bam);
if (dev == NULL) {
SPS_ERR("BAM-DMA: invalid BAM");
goto exit_err;
}
if (pipe_index >= dev->num_pipes) {
SPS_ERR("BAM-DMA: BAM %x invalid pipe: %d",
bam->props.phys_addr, pipe_index);
goto exit_err;
}
if (dev->pipes[pipe_index] != PIPE_ACTIVE) {
SPS_ERR("BAM-DMA: BAM %x pipe %d not active",
bam->props.phys_addr, pipe_index);
goto exit_err;
}
/*
* The channel must be enabled when the dest/input/write pipe
* is enabled
*/
if (DMA_PIPE_IS_DEST(pipe_index)) {
/* Configure and enable the channel */
channel = pipe_index / 2;
chan = &dev->chans[channel];
if (chan->threshold != SPS_DMA_THRESHOLD_DEFAULT)
dma_write_reg_field(dev->virt_addr,
DMA_CHNL_CONFIG(channel),
DMA_CHNL_ACT_THRESH,
chan->thresh);
if (chan->priority != SPS_DMA_PRI_DEFAULT)
dma_write_reg_field(dev->virt_addr,
DMA_CHNL_CONFIG(channel),
DMA_CHNL_WEIGHT,
chan->weight);
dma_write_reg_field(dev->virt_addr,
DMA_CHNL_CONFIG(channel),
DMA_CHNL_ENABLE, 1);
}
result = 0;
exit_err:
mutex_unlock(&bam_dma_lock);
return result;
}
/**
*
* Read register with debug info.
*
* @base - bam base virtual address.
* @offset - register offset.
*
* @return u32
*/
static inline u32 bam_read_reg(void *base, u32 offset)
{
u32 val = ioread32(base + offset);
SPS_DBG("sps:bam 0x%x(va) read reg 0x%x r_val 0x%x.\n",
(u32) base, offset, val);
return val;
}
/**
* Initialize driver memory module
*
*/
int sps_mem_init(u32 pipemem_phys_base, u32 pipemem_size)
{
int res;
/* 2^8=128. The desc-fifo and data-fifo minimal allocation. */
int min_alloc_order = 8;
iomem_phys = pipemem_phys_base;
iomem_size = pipemem_size;
if (iomem_phys == 0) {
SPS_ERR("sps:Invalid Pipe-Mem address");
return SPS_ERROR;
} else {
iomem_virt = ioremap(iomem_phys, iomem_size);
if (!iomem_virt) {
SPS_ERR("sps:Failed to IO map pipe memory.\n");
return -ENOMEM;
}
}
iomem_offset = 0;
SPS_DBG("sps:sps_mem_init.iomem_phys=0x%x,iomem_virt=0x%x.",
iomem_phys, (u32) iomem_virt);
pool = gen_pool_create(min_alloc_order, nid);
res = gen_pool_add(pool, (u32) iomem_virt, iomem_size, nid);
if (res)
return res;
return 0;
}
/**
* Initialize BAM DMA module
*
*/
int sps_dma_init(const struct sps_bam_props *bam_props)
{
struct sps_bam_props props;
const struct sps_bam_props *bam_reg;
u32 h;
/* Init local data */
memset(&bam_dma_dev, 0, sizeof(bam_dma_dev));
num_bams = 0;
memset(bam_handles, 0, sizeof(bam_handles));
/* Create a mutex to control access to the BAM-DMA devices */
mutex_init(&bam_dma_lock);
/* Are there any BAM DMA devices? */
if (bam_props == NULL)
return 0;
/*
* Registers all BAMs in the BSP properties, but only uses the first
* BAM-DMA device for allocations.
*/
if (bam_props->phys_addr) {
/* Force multi-EE option for all BAM-DMAs */
bam_reg = bam_props;
if ((bam_props->options & SPS_BAM_OPT_BAMDMA) &&
(bam_props->manage & SPS_BAM_MGR_MULTI_EE) == 0) {
SPS_DBG("sps:Setting multi-EE options for BAM-DMA: %x",
bam_props->phys_addr);
props = *bam_props;
props.manage |= SPS_BAM_MGR_MULTI_EE;
bam_reg = &props;
}
/* Register the BAM */
if (sps_register_bam_device(bam_reg, &h)) {
SPS_ERR("sps:Fail to register BAM-DMA BAM device: "
"phys 0x%0x", bam_props->phys_addr);
return SPS_ERROR;
}
/* Record the BAM so that it may be deregistered later */
if (num_bams < MAX_BAM_DMA_BAMS) {
bam_handles[num_bams] = h;
num_bams++;
} else {
SPS_ERR("sps:BAM-DMA: BAM limit exceeded: %d",
num_bams);
return SPS_ERROR;
}
} else {
SPS_ERR("sps:BAM-DMA phys_addr is zero.");
return SPS_ERROR;
}
return 0;
}
/**
* Read register masked field with debug info.
*
* @base - bam base virtual address.
* @offset - register offset.
* @mask - register bitmask.
*
* @return u32
*/
static inline u32 bam_read_reg_field(void *base, u32 offset, const u32 mask)
{
u32 shift = find_first_bit((void *)&mask, 32);
u32 val = ioread32(base + offset);
val &= mask; /* clear other bits */
val >>= shift;
SPS_DBG("sps:bam 0x%x(va) read reg 0x%x mask 0x%x r_val 0x%x.\n",
(u32) base, offset, mask, val);
return val;
}
/**
* Write register masked field with debug info.
*
* @base - bam base virtual address.
* @offset - register offset.
* @mask - register bitmask.
* @val - value to write.
*
*/
static inline void dma_write_reg_field(void *base, u32 offset,
const u32 mask, u32 val)
{
u32 shift = find_first_bit((void *)&mask, 32);
u32 tmp = ioread32(base + offset);
tmp &= ~mask; /* clear written bits */
val = tmp | (val << shift);
iowrite32(val, base + offset);
SPS_DBG("bamdma: write reg 0x%x w_val 0x%x.", offset, val);
}
int sps_dma_init(const struct sps_bam_props *bam_props)
{
struct sps_bam_props props;
const struct sps_bam_props *bam_reg;
u32 h;
memset(&bam_dma_dev, 0, sizeof(bam_dma_dev));
num_bams = 0;
memset(bam_handles, 0, sizeof(bam_handles));
mutex_init(&bam_dma_lock);
if (bam_props == NULL)
return 0;
if (bam_props->phys_addr) {
bam_reg = bam_props;
if ((bam_props->options & SPS_BAM_OPT_BAMDMA) &&
(bam_props->manage & SPS_BAM_MGR_MULTI_EE) == 0) {
SPS_DBG("sps:Setting multi-EE options for BAM-DMA: %x",
bam_props->phys_addr);
props = *bam_props;
props.manage |= SPS_BAM_MGR_MULTI_EE;
bam_reg = &props;
}
if (sps_register_bam_device(bam_reg, &h)) {
SPS_ERR("sps:Fail to register BAM-DMA BAM device: "
"phys 0x%0x", bam_props->phys_addr);
return SPS_ERROR;
}
if (num_bams < MAX_BAM_DMA_BAMS) {
bam_handles[num_bams] = h;
num_bams++;
} else {
SPS_ERR("sps:BAM-DMA: BAM limit exceeded: %d",
num_bams);
return SPS_ERROR;
}
} else {
SPS_ERR("sps:BAM-DMA phys_addr is zero.");
return SPS_ERROR;
}
return 0;
}
/**
* Free a BAM DMA channel
*
*/
int sps_free_dma_chan(struct sps_dma_chan *chan)
{
struct bamdma_device *dev;
u32 pipe_index;
int result = 0;
if (chan == NULL) {
SPS_ERR("sps_free_dma_chan. chan is NULL");
return SPS_ERROR;
}
mutex_lock(&bam_dma_lock);
dev = sps_dma_find_device(chan->dev);
if (dev == NULL) {
SPS_ERR("BAM-DMA: invalid BAM handle: %x", chan->dev);
result = SPS_ERROR;
goto exit_err;
}
/* Verify the pipe indices */
pipe_index = chan->dest_pipe_index;
if (pipe_index >= dev->num_pipes || ((pipe_index & 1)) ||
(pipe_index + 1) != chan->src_pipe_index) {
SPS_ERR("sps_free_dma_chan. Invalid pipe indices");
SPS_DBG("num_pipes=%d.dest=%d.src=%d.",
dev->num_pipes,
chan->dest_pipe_index,
chan->src_pipe_index);
result = SPS_ERROR;
goto exit_err;
}
/* Are both pipes inactive? */
if (dev->chans[pipe_index / 2].state != DMA_CHAN_STATE_ALLOC_EXT ||
dev->pipes[pipe_index] != PIPE_INACTIVE ||
dev->pipes[pipe_index + 1] != PIPE_INACTIVE) {
SPS_ERR("BAM-DMA: attempt to free active chan %d: %d %d",
pipe_index / 2, dev->pipes[pipe_index],
dev->pipes[pipe_index + 1]);
result = SPS_ERROR;
goto exit_err;
}
/* Free the channel */
dev->chans[pipe_index / 2].state = DMA_CHAN_STATE_FREE;
exit_err:
mutex_unlock(&bam_dma_lock);
return result;
}
/**
* Free I/O memory
*
*/
void sps_mem_free_io(u32 phys_addr, u32 bytes)
{
u32 virt_addr = 0;
iomem_offset = phys_addr - iomem_phys;
virt_addr = (u32) iomem_virt + iomem_offset;
SPS_DBG("sps:sps_mem_free_io.phys=0x%x.virt=0x%x.size=0x%x.",
phys_addr, virt_addr, bytes);
gen_pool_free(pool, virt_addr, bytes);
total_free += bytes;
}
/**
* Initialize a BAM pipe
*/
int bam_pipe_init(void *base, u32 pipe, struct bam_pipe_parameters *param,
u32 ee)
{
/* Reset the BAM pipe */
bam_write_reg(base, P_RST(pipe), 1);
/* No delay needed */
bam_write_reg(base, P_RST(pipe), 0);
/* Enable the Pipe Interrupt at the BAM level */
bam_write_reg_field(base, IRQ_SRCS_MSK_EE(ee), (1 << pipe), 1);
bam_write_reg(base, P_IRQ_EN(pipe), param->pipe_irq_mask);
bam_write_reg_field(base, P_CTRL(pipe), P_DIRECTION, param->dir);
bam_write_reg_field(base, P_CTRL(pipe), P_SYS_MODE, param->mode);
bam_write_reg(base, P_EVNT_GEN_TRSHLD(pipe), param->event_threshold);
bam_write_reg(base, P_DESC_FIFO_ADDR(pipe), param->desc_base);
bam_write_reg_field(base, P_FIFO_SIZES(pipe), P_DESC_FIFO_SIZE,
param->desc_size);
bam_write_reg_field(base, P_CTRL(pipe), P_SYS_STRM,
param->stream_mode);
if (param->mode == BAM_PIPE_MODE_BAM2BAM) {
u32 peer_dest_addr = param->peer_phys_addr +
P_EVNT_REG(param->peer_pipe);
bam_write_reg(base, P_DATA_FIFO_ADDR(pipe),
param->data_base);
bam_write_reg_field(base, P_FIFO_SIZES(pipe),
P_DATA_FIFO_SIZE, param->data_size);
bam_write_reg(base, P_EVNT_DEST_ADDR(pipe), peer_dest_addr);
SPS_DBG("sps:bam=0x%x(va).pipe=%d.peer_bam=0x%x."
"peer_pipe=%d.\n",
(u32) base, pipe,
(u32) param->peer_phys_addr,
param->peer_pipe);
}
/* Pipe Enable - at last */
bam_write_reg_field(base, P_CTRL(pipe), P_EN, 1);
return 0;
}
/**
* Initialize driver memory module
*
*/
int sps_mem_init(phys_addr_t pipemem_phys_base, u32 pipemem_size)
{
int res;
/* 2^8=128. The desc-fifo and data-fifo minimal allocation. */
int min_alloc_order = 8;
if ((d_type == 0) || (d_type == 2) || imem) {
iomem_phys = pipemem_phys_base;
iomem_size = pipemem_size;
if (iomem_phys == 0) {
SPS_ERR("sps:Invalid Pipe-Mem address");
return SPS_ERROR;
} else {
iomem_virt = ioremap(iomem_phys, iomem_size);
if (!iomem_virt) {
SPS_ERR("sps:Failed to IO map pipe memory.\n");
return -ENOMEM;
}
}
iomem_offset = 0;
SPS_DBG("sps:sps_mem_init.iomem_phys=%pa,iomem_virt=0x%p.",
&iomem_phys, iomem_virt);
}
pool = gen_pool_create(min_alloc_order, nid);
if (!pool) {
SPS_ERR("sps:Failed to create a new memory pool.\n");
return -ENOMEM;
}
if ((d_type == 0) || (d_type == 2) || imem) {
res = gen_pool_add(pool, (uintptr_t)iomem_virt,
iomem_size, nid);
if (res)
return res;
}
return 0;
}
int sps_mem_init(u32 pipemem_phys_base, u32 pipemem_size)
{
int res;
int min_alloc_order = 8;
if ((d_type == 0) || (d_type == 2)) {
iomem_phys = pipemem_phys_base;
iomem_size = pipemem_size;
if (iomem_phys == 0) {
SPS_ERR("sps:Invalid Pipe-Mem address");
return SPS_ERROR;
} else {
iomem_virt = ioremap(iomem_phys, iomem_size);
if (!iomem_virt) {
SPS_ERR("sps:Failed to IO map pipe memory.\n");
return -ENOMEM;
}
}
iomem_offset = 0;
SPS_DBG("sps:sps_mem_init.iomem_phys=0x%x,iomem_virt=0x%x.",
iomem_phys, (u32) iomem_virt);
}
pool = gen_pool_create(min_alloc_order, nid);
if (!pool) {
SPS_ERR("sps:Failed to create a new memory pool.\n");
return -ENOMEM;
}
if ((d_type == 0) || (d_type == 2)) {
res = gen_pool_add(pool, (u32) iomem_virt, iomem_size, nid);
if (res)
return res;
}
return 0;
}
/**
* Allocate I/O (pipe) memory
*
*/
u32 sps_mem_alloc_io(u32 bytes)
{
u32 phys_addr = SPS_ADDR_INVALID;
u32 virt_addr = 0;
virt_addr = gen_pool_alloc(pool, bytes);
if (virt_addr) {
iomem_offset = virt_addr - (u32) iomem_virt;
phys_addr = iomem_phys + iomem_offset;
total_alloc += bytes;
} else {
SPS_ERR("sps:gen_pool_alloc %d bytes fail.", bytes);
return SPS_ADDR_INVALID;
}
SPS_DBG("sps:sps_mem_alloc_io.phys=0x%x.virt=0x%x.size=0x%x.",
phys_addr, virt_addr, bytes);
return phys_addr;
}
int sps_map_init(const struct sps_map *map_props, u32 options)
{
const struct sps_map *maps;
memset(&sps_maps, 0, sizeof(sps_maps));
if (map_props == NULL)
return 0;
sps_maps.maps = map_props;
sps_maps.options = options;
for (maps = sps_maps.maps;; maps++, sps_maps.num_maps++)
if (maps->src.periph_class == SPS_CLASS_INVALID &&
maps->src.periph_phy_addr == SPS_ADDR_INVALID)
break;
SPS_DBG("sps: %d mappings", sps_maps.num_maps);
return 0;
}
/**
*
* Write register with debug info.
*
* @base - bam base virtual address.
* @offset - register offset.
* @val - value to write.
*
*/
static inline void bam_write_reg(void *base, u32 offset, u32 val)
{
iowrite32(val, base + offset);
SPS_DBG("sps:bam 0x%x(va) write reg 0x%x w_val 0x%x.\n",
(u32) base, offset, val);
}
/**
* Initialize BAM DMA device
*
*/
int sps_dma_device_init(u32 h)
{
struct bamdma_device *dev;
struct sps_bam_props *props;
u32 chan;
int result = SPS_ERROR;
mutex_lock(&bam_dma_lock);
/* Find a free BAM-DMA device slot */
dev = NULL;
if (bam_dma_dev[0].bam != NULL) {
SPS_ERR("BAM-DMA BAM device already initialized.");
goto exit_err;
} else {
dev = &bam_dma_dev[0];
}
/* Record BAM */
memset(dev, 0, sizeof(*dev));
dev->h = h;
dev->bam = sps_h2bam(h);
if (dev->bam == NULL) {
SPS_ERR("BAM-DMA BAM device is not found from the handle.");
goto exit_err;
}
/* Map the BAM DMA device into virtual space, if necessary */
props = &dev->bam->props;
dev->phys_addr = props->periph_phys_addr;
if (props->periph_virt_addr != NULL) {
dev->virt_addr = props->periph_virt_addr;
dev->virtual_mapped = false;
} else {
if (props->periph_virt_size == 0) {
SPS_ERR("Unable to map BAM DMA IO memory: %x %x",
dev->phys_addr, props->periph_virt_size);
goto exit_err;
}
dev->virt_addr = ioremap(dev->phys_addr,
props->periph_virt_size);
if (dev->virt_addr == NULL) {
SPS_ERR("Unable to map BAM DMA IO memory: %x %x",
dev->phys_addr, props->periph_virt_size);
goto exit_err;
}
dev->virtual_mapped = true;
}
dev->hwio = (void *) dev->virt_addr;
/* Is the BAM-DMA device locally controlled? */
if ((props->manage & SPS_BAM_MGR_DEVICE_REMOTE) == 0) {
SPS_DBG("BAM-DMA is controlled locally: %x",
dev->phys_addr);
dev->local = true;
} else {
SPS_DBG("BAM-DMA is controlled remotely: %x",
dev->phys_addr);
dev->local = false;
}
/*
* Enable the BAM DMA and determine the number of pipes/channels.
* Leave the BAM-DMA enabled, since it is always a shared device.
*/
if (sps_dma_device_enable(dev))
goto exit_err;
dev->num_pipes = dev->bam->props.num_pipes;
/* Disable all channels */
if (dev->local)
for (chan = 0; chan < (dev->num_pipes / 2); chan++) {
dma_write_reg_field(dev->virt_addr,
DMA_CHNL_CONFIG(chan),
DMA_CHNL_ENABLE, 0);
}
result = 0;
exit_err:
if (result) {
if (dev != NULL) {
if (dev->virtual_mapped)
iounmap(dev->virt_addr);
dev->bam = NULL;
}
}
mutex_unlock(&bam_dma_lock);
return result;
}
/**
* Allocate a BAM DMA channel
*
*/
int sps_alloc_dma_chan(const struct sps_alloc_dma_chan *alloc,
struct sps_dma_chan *chan_info)
{
struct bamdma_device *dev;
struct bamdma_chan *chan;
u32 pipe_index;
enum bam_dma_thresh_dma thresh = (enum bam_dma_thresh_dma) 0;
enum bam_dma_weight_dma weight = (enum bam_dma_weight_dma) 0;
int result = SPS_ERROR;
if (alloc == NULL || chan_info == NULL) {
SPS_ERR("sps_alloc_dma_chan. invalid parameters");
return SPS_ERROR;
}
/* Translate threshold and priority to hwio values */
if (alloc->threshold != SPS_DMA_THRESHOLD_DEFAULT) {
if (alloc->threshold >= 512)
thresh = BAM_DMA_THRESH_512;
else if (alloc->threshold >= 256)
thresh = BAM_DMA_THRESH_256;
else if (alloc->threshold >= 128)
thresh = BAM_DMA_THRESH_128;
else
thresh = BAM_DMA_THRESH_64;
}
weight = alloc->priority;
if ((u32)alloc->priority > (u32)BAM_DMA_WEIGHT_HIGH) {
SPS_ERR("BAM-DMA: invalid priority: %x", alloc->priority);
return SPS_ERROR;
}
mutex_lock(&bam_dma_lock);
dev = sps_dma_find_device(alloc->dev);
if (dev == NULL) {
SPS_ERR("BAM-DMA: invalid BAM handle: %x", alloc->dev);
goto exit_err;
}
/* Search for a free set of pipes */
for (pipe_index = 0, chan = dev->chans;
pipe_index < dev->num_pipes; pipe_index += 2, chan++) {
if (chan->state == DMA_CHAN_STATE_FREE) {
/* Just check pipes for safety */
if (dev->pipes[pipe_index] != PIPE_INACTIVE ||
dev->pipes[pipe_index + 1] != PIPE_INACTIVE) {
SPS_ERR("BAM-DMA: channel %d state error:%d %d",
pipe_index / 2, dev->pipes[pipe_index],
dev->pipes[pipe_index + 1]);
goto exit_err;
}
break; /* Found free pipe */
}
}
if (pipe_index >= dev->num_pipes) {
SPS_ERR("BAM-DMA: no free channel. num_pipes = %d",
dev->num_pipes);
goto exit_err;
}
chan->state = DMA_CHAN_STATE_ALLOC_EXT;
/* Store config values for use when pipes are activated */
chan = &dev->chans[pipe_index / 2];
chan->threshold = alloc->threshold;
chan->thresh = thresh;
chan->priority = alloc->priority;
chan->weight = weight;
SPS_DBG("sps_alloc_dma_chan. pipe %d.\n", pipe_index);
/* Report allocated pipes to client */
chan_info->dev = dev->h;
/* Dest/input/write pipex */
chan_info->dest_pipe_index = pipe_index;
/* Source/output/read pipe */
chan_info->src_pipe_index = pipe_index + 1;
result = 0;
exit_err:
mutex_unlock(&bam_dma_lock);
return result;
}
/**
* Initialize a BAM pipe
*/
int bam_pipe_init(void *base, u32 pipe, struct bam_pipe_parameters *param,
u32 ee)
{
SPS_DBG2("sps:%s:bam=0x%x(va).pipe=%d.", __func__, (u32) base, pipe);
/* Reset the BAM pipe */
bam_write_reg(base, P_RST(pipe), 1);
/* No delay needed */
bam_write_reg(base, P_RST(pipe), 0);
/* Enable the Pipe Interrupt at the BAM level */
bam_write_reg_field(base, IRQ_SRCS_MSK_EE(ee), (1 << pipe), 1);
bam_write_reg(base, P_IRQ_EN(pipe), param->pipe_irq_mask);
bam_write_reg_field(base, P_CTRL(pipe), P_DIRECTION, param->dir);
bam_write_reg_field(base, P_CTRL(pipe), P_SYS_MODE, param->mode);
bam_write_reg(base, P_EVNT_GEN_TRSHLD(pipe), param->event_threshold);
bam_write_reg(base, P_DESC_FIFO_ADDR(pipe), param->desc_base);
bam_write_reg_field(base, P_FIFO_SIZES(pipe), P_DESC_FIFO_SIZE,
param->desc_size);
bam_write_reg_field(base, P_CTRL(pipe), P_SYS_STRM,
param->stream_mode);
#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
bam_write_reg_field(base, P_CTRL(pipe), P_LOCK_GROUP,
param->lock_group);
SPS_DBG("sps:bam=0x%x(va).pipe=%d.lock_group=%d.\n",
(u32) base, pipe, param->lock_group);
#endif
if (param->mode == BAM_PIPE_MODE_BAM2BAM) {
u32 peer_dest_addr = param->peer_phys_addr +
P_EVNT_REG(param->peer_pipe);
bam_write_reg(base, P_DATA_FIFO_ADDR(pipe),
param->data_base);
bam_write_reg_field(base, P_FIFO_SIZES(pipe),
P_DATA_FIFO_SIZE, param->data_size);
bam_write_reg(base, P_EVNT_DEST_ADDR(pipe), peer_dest_addr);
SPS_DBG2("sps:bam=0x%x(va).pipe=%d.peer_bam=0x%x."
"peer_pipe=%d.\n",
(u32) base, pipe,
(u32) param->peer_phys_addr,
param->peer_pipe);
#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
bam_write_reg_field(base, P_CTRL(pipe), P_WRITE_NWD,
param->write_nwd);
SPS_DBG("sps:%s WRITE_NWD bit for this bam2bam pipe.",
param->write_nwd ? "Set" : "Do not set");
#endif
}
/* Pipe Enable - at last */
bam_write_reg_field(base, P_CTRL(pipe), P_EN, 1);
return 0;
}
/**
*
* Write register with debug info.
*
* @base - bam base virtual address.
* @offset - register offset.
* @val - value to write.
*
*/
static inline void dma_write_reg(void *base, u32 offset, u32 val)
{
iowrite32(val, base + offset);
SPS_DBG("bamdma: write reg 0x%x w_val 0x%x.", offset, val);
}
