bool
DevicesConfigPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false, require_restart = false;
if (!SaveDeviceConfig())
return false;
changed |= SaveFormProperty(form, _T("prpSetSystemTimeFromGPS"),
szProfileSetSystemTimeFromGPS,
CommonInterface::SetComputerSettings().set_system_time_from_gps);
changed |= SaveFormProperty(form, _T("prpIgnoreNMEAChecksum"),
szProfileIgnoreNMEAChecksum,
NMEAParser::ignore_checksum);
if (DevicePortChanged) {
changed = true;
for (unsigned i = 0; i < NUMDEV; ++i)
Profile::SetDeviceConfig(i, device_config[i]);
}
_changed |= changed;
_require_restart |= require_restart;
return true;
}
bool
WindSetupPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false, require_restart = false;
const NMEAInfo &basic = XCSoarInterface::Basic();
WindSettings &settings = CommonInterface::SetComputerSettings().wind;
const bool external_wind = basic.external_wind_available &&
settings.use_external_wind;
if (!external_wind) {
unsigned auto_wind_mode = settings.GetLegacyAutoWindMode();
if (SaveFormProperty(form, _T("prpAutoWind"), szProfileAutoWind,
auto_wind_mode)) {
settings.SetLegacyAutoWindMode(auto_wind_mode);
changed = true;
}
}
changed |= SaveFormProperty(form, _T("prpTrailDrift"),
XCSoarInterface::
SetMapSettings().trail_drift_enabled);
ActionInterface::SendMapSettings();
_changed |= changed;
_require_restart |= require_restart;
return true;
}
bool
DevicesConfigPanel::Save(bool &requirerestart)
{
DevicePortChanged =
FinishDeviceFields(device_config[0],
(WndProperty*)wf->FindByName(_T("prpComPort1")),
(WndProperty*)wf->FindByName(_T("prpComSpeed1")),
(WndProperty*)wf->FindByName(_T("prpComDevice1")));
DevicePortChanged =
FinishDeviceFields(device_config[1],
(WndProperty*)wf->FindByName(_T("prpComPort2")),
(WndProperty*)wf->FindByName(_T("prpComSpeed2")),
(WndProperty*)wf->FindByName(_T("prpComDevice2"))) ||
DevicePortChanged;
changed |= SaveFormProperty(*wf, _T("prpSetSystemTimeFromGPS"),
szProfileSetSystemTimeFromGPS,
XCSoarInterface::SetSettingsMap().SetSystemTimeFromGPS);
changed |= SaveFormProperty(*wf, _T("prpIgnoreNMEAChecksum"),
szProfileIgnoreNMEAChecksum,
NMEAParser::ignore_checksum);
if (DevicePortChanged) {
changed = true;
for (unsigned i = 0; i < NUMDEV; ++i)
Profile::SetDeviceConfig(i, device_config[i]);
if (!is_embedded())
requirerestart = true;
}
return changed;
}
static void
UpdatePlane()
{
SavePolarShape(*dialog, plane.polar_shape);
SaveFormProperty(*dialog, _T("ReferenceMassEdit"), plane.reference_mass);
SaveFormProperty(*dialog, _T("DryMassEdit"), plane.dry_mass);
}
bool
RouteConfigPanel::Save()
{
bool changed = false;
WndProperty *wp;
SETTINGS_COMPUTER &settings_computer = XCSoarInterface::SetSettingsComputer();
wp = (WndProperty*)wf->FindByName(_T("prpRoutePlannerMode"));
if (wp) {
DataFieldEnum &df = *(DataFieldEnum *)wp->GetDataField();
if ((int)settings_computer.route_planner.mode != df.GetAsInteger()) {
settings_computer.route_planner.mode = (RoutePlannerConfig::Mode)df.GetAsInteger();
Profile::Set(szProfileRoutePlannerMode,
(unsigned)settings_computer.route_planner.mode);
changed = true;
}
}
wp = (WndProperty*)wf->FindByName(_T("prpReachPolarMode"));
if (wp) {
DataFieldEnum &df = *(DataFieldEnum *)wp->GetDataField();
if ((int)settings_computer.route_planner.reach_polar_mode != df.GetAsInteger()) {
settings_computer.route_planner.reach_polar_mode =
(RoutePlannerConfig::PolarMode)df.GetAsInteger();
Profile::Set(szProfileReachPolarMode,
(unsigned)settings_computer.route_planner.reach_polar_mode);
changed = true;
}
}
changed |= SaveFormPropertyEnum(*wf, _T("prpFinalGlideTerrain"),
szProfileFinalGlideTerrain,
settings_computer.FinalGlideTerrain);
changed |= SaveFormProperty(*wf, _T("prpRoutePlannerAllowClimb"),
szProfileRoutePlannerAllowClimb,
settings_computer.route_planner.allow_climb);
changed |= SaveFormProperty(*wf, _T("prpRoutePlannerUseCeiling"),
szProfileRoutePlannerUseCeiling,
settings_computer.route_planner.use_ceiling);
wp = (WndProperty*)wf->FindByName(_T("prpTurningReach"));
if (wp) {
DataFieldEnum &df = *(DataFieldEnum *)wp->GetDataField();
if ((int)settings_computer.route_planner.reach_calc_mode != df.GetAsInteger()) {
settings_computer.route_planner.reach_calc_mode =
(RoutePlannerConfig::ReachMode)df.GetAsInteger();
Profile::Set(szProfileTurningReach,
(unsigned)settings_computer.route_planner.reach_calc_mode);
changed = true;
}
}
return changed;
}
static void
UpdatePlane()
{
SaveFormProperty(*dialog, _T("HandicapEdit"), plane.handicap);
SaveFormProperty(*dialog, _T("WingAreaEdit"), plane.wing_area);
SaveFormProperty(*dialog, _T("MaxBallastEdit"), plane.max_ballast);
SaveFormProperty(*dialog, _T("DumpTimeEdit"), plane.dump_time);
SaveFormProperty(*dialog, _T("MaxSpeedEdit"),
UnitGroup::HORIZONTAL_SPEED, plane.max_speed);
}
static void
UpdatePlane()
{
SaveFormProperty(*dialog, _T("HandicapEdit"), plane.handicap);
SaveFormProperty(*dialog, _T("WingAreaEdit"), plane.wing_area);
SaveFormProperty(*dialog, _T("MaxBallastEdit"), plane.max_ballast);
SaveFormProperty(*dialog, _T("DumpTimeEdit"), plane.dump_time);
SaveFormProperty(*dialog, _T("MaxSpeedEdit"),
ugHorizontalSpeed, plane.max_speed);
}
bool
WaypointDisplayConfigPanel::Save()
{
WaypointRendererSettings &settings =
CommonInterface::SetSettingsMap().waypoint;
bool changed = false;
WndProperty *wp;
changed |= SaveFormPropertyEnum(*wf, _T("prpWaypointLabels"),
szProfileDisplayText,
settings.display_text_type);
changed |= SaveFormPropertyEnum(*wf, _T("prpWaypointArrivalHeightDisplay"),
szProfileWaypointArrivalHeightDisplay,
settings.arrival_height_display);
changed |= SaveFormPropertyEnum(*wf, _T("prpWaypointLabelStyle"),
szProfileWaypointLabelStyle,
settings.landable_render_mode);
changed |= SaveFormPropertyEnum(*wf, _T("prpWaypointLabelSelection"),
szProfileWaypointLabelSelection,
settings.label_selection);
wp = (WndProperty*)wf->FindByName(_T("prpAppIndLandable"));
if (wp) {
if (settings.landable_style != (IndLandable_t)(wp->GetDataField()->GetAsInteger())) {
settings.landable_style = (IndLandable_t)(wp->GetDataField()->GetAsInteger());
Profile::Set(szProfileAppIndLandable, settings.landable_style);
changed = true;
CommonInterface::main_window.look->waypoint.Initialise(settings);
}
}
changed |= SaveFormProperty(*wf, _T("prpAppUseSWLandablesRendering"),
szProfileAppUseSWLandablesRendering,
settings.vector_landable_rendering);
changed |= SaveFormProperty(*wf, _T("prpAppLandableRenderingScale"),
szProfileAppLandableRenderingScale,
settings.landable_rendering_scale);
changed |= SaveFormProperty(*wf, _T("prpAppScaleRunwayLength"),
szProfileAppScaleRunwayLength,
settings.scale_runway_length);
return changed;
}
static bool
SaveFromForm(const WndForm &form, SETTINGS_COMPUTER &settings)
{
return
SaveFormProperty(form, _T("prpVoiceClimbRate"),
settings.EnableVoiceClimbRate,
szProfileVoiceClimbRate) ||
SaveFormProperty(form, _T("prpVoiceTerrain"),
settings.EnableVoiceTerrain, szProfileVoiceTerrain) ||
SaveFormProperty(form, _T("prpVoiceWaypointDistance"),
settings.EnableVoiceWaypointDistance,
szProfileVoiceWaypointDistance) ||
SaveFormProperty(form, _T("prpVoiceTaskAltitudeDifference"),
settings.EnableVoiceTaskAltitudeDifference,
szProfileVoiceTaskAltitudeDifference) ||
SaveFormProperty(form, _T("prpVoiceMacCready"),
settings.EnableVoiceMacCready,
szProfileVoiceMacCready) ||
SaveFormProperty(form, _T("prpVoiceNewWaypoint"),
settings.EnableVoiceNewWaypoint,
szProfileVoiceNewWaypoint) ||
SaveFormProperty(form, _T("prpVoiceInSector"),
settings.EnableVoiceInSector, szProfileVoiceInSector) ||
SaveFormProperty(form, _T("prpVoiceAirspace"),
settings.EnableVoiceAirspace, szProfileVoiceAirspace);
}
static bool
SaveFromForm(const WndForm &form, VoiceSettings &settings)
{
return
SaveFormProperty(form, _T("prpVoiceClimbRate"),
settings.voice_climb_rate_enabled,
ProfileKeys::VoiceClimbRate) ||
SaveFormProperty(form, _T("prpVoiceTerrain"),
settings.voice_terrain_enabled, ProfileKeys::VoiceTerrain) ||
SaveFormProperty(form, _T("prpVoiceWaypointDistance"),
settings.voice_waypoint_distance_enabled,
ProfileKeys::VoiceWaypointDistance) ||
SaveFormProperty(form, _T("prpVoiceTaskAltitudeDifference"),
settings.voice_task_altitude_difference_enabled,
ProfileKeys::VoiceTaskAltitudeDifference) ||
SaveFormProperty(form, _T("prpVoiceMacCready"),
settings.voice_mac_cready_enabled,
ProfileKeys::VoiceMacCready) ||
SaveFormProperty(form, _T("prpVoiceNewWaypoint"),
settings.voice_new_waypoint_enabled,
ProfileKeys::VoiceNewWaypoint) ||
SaveFormProperty(form, _T("prpVoiceInSector"),
settings.voice_in_sector_enabled, ProfileKeys::VoiceInSector) ||
SaveFormProperty(form, _T("prpVoiceAirspace"),
settings.voice_airspace_enabled, ProfileKeys::VoiceAirspace);
}
static bool
SaveFormToPolar(SubForm &form, PolarInfo &polar)
{
bool changed = SavePolarShape(form, polar.shape);
changed |= SaveFormProperty(form, _T("prpPolarReferenceMass"), polar.reference_mass);
changed |= SaveFormProperty(form, _T("prpPolarMaxBallast"), polar.max_ballast);
changed |= SaveFormProperty(form, _T("prpPolarWingArea"), polar.wing_area);
changed |= SaveFormProperty(form, _T("prpMaxManoeuveringSpeed"),
UnitGroup::HORIZONTAL_SPEED, polar.v_no);
return changed;
}
bool
TaskRulesConfigPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false, require_restart = false;
ComputerSettings &settings_computer = XCSoarInterface::SetComputerSettings();
TaskBehaviour &task_behaviour = settings_computer.task;
OrderedTaskBehaviour &otb = task_behaviour.ordered_defaults;
changed |= SaveFormProperty(form, _T("prpStartMaxSpeed"),
ugHorizontalSpeed,
otb.start_max_speed,
szProfileStartMaxSpeed);
changed |= SaveFormProperty(form, _T("prpStartMaxSpeedMargin"),
ugHorizontalSpeed,
task_behaviour.start_max_speed_margin,
szProfileStartMaxSpeedMargin);
changed |= SaveFormProperty(form, _T("prpStartMaxHeight"), ugAltitude,
otb.start_max_height,
szProfileStartMaxHeight);
changed |= SaveFormProperty(form, _T("prpStartMaxHeightMargin"), ugAltitude,
task_behaviour.start_max_height_margin,
szProfileStartMaxHeightMargin);
changed |= SaveFormPropertyEnum(form, _T("prpStartHeightRef"),
szProfileStartHeightRef,
otb.start_max_height_ref);
changed |= SaveFormProperty(form, _T("prpFinishMinHeight"), ugAltitude,
otb.finish_min_height,
szProfileFinishMinHeight);
changed |= SaveFormPropertyEnum(form, _T("prpFinishHeightRef"),
szProfileFinishHeightRef,
otb.finish_min_height_ref);
changed |= SaveFormPropertyEnum(form, _T("prpContests"), szProfileOLCRules,
task_behaviour.contest);
_changed |= changed;
_require_restart |= require_restart;
return true;
}
bool
VarioConfigPanel::Save()
{
bool changed = false;
changed |= SaveFormProperty(*wf, _T("prpAppGaugeVarioSpeedToFly"),
szProfileAppGaugeVarioSpeedToFly,
XCSoarInterface::main_window.vario->ShowSpeedToFly);
changed |= SaveFormProperty(*wf, _T("prpAppGaugeVarioAvgText"),
szProfileAppGaugeVarioAvgText,
XCSoarInterface::main_window.vario->ShowAvgText);
changed |= SaveFormProperty(*wf, _T("prpAppGaugeVarioMc"),
szProfileAppGaugeVarioMc,
XCSoarInterface::main_window.vario->ShowMc);
changed |= SaveFormProperty(*wf, _T("prpAppGaugeVarioBugs"),
szProfileAppGaugeVarioBugs,
XCSoarInterface::main_window.vario->ShowBugs);
changed |= SaveFormProperty(*wf, _T("prpAppGaugeVarioBallast"),
szProfileAppGaugeVarioBallast,
XCSoarInterface::main_window.vario->ShowBallast);
changed |= SaveFormProperty(*wf, _T("prpAppGaugeVarioGross"),
szProfileAppGaugeVarioGross,
XCSoarInterface::main_window.vario->ShowGross);
changed |= SaveFormProperty(*wf, _T("prpAppAveNeedle"), szProfileAppAveNeedle,
XCSoarInterface::main_window.vario->ShowAveNeedle);
return changed;
}
static void
UpdatePlane()
{
SaveFormProperty(*dialog, _T("V1Edit"), ugHorizontalSpeed, plane.v1);
SaveFormProperty(*dialog, _T("V2Edit"), ugHorizontalSpeed, plane.v2);
SaveFormProperty(*dialog, _T("V3Edit"), ugHorizontalSpeed, plane.v3);
SaveFormProperty(*dialog, _T("W1Edit"), ugVerticalSpeed, plane.w1);
SaveFormProperty(*dialog, _T("W2Edit"), ugVerticalSpeed, plane.w2);
SaveFormProperty(*dialog, _T("W3Edit"), ugVerticalSpeed, plane.w3);
SaveFormProperty(*dialog, _T("ReferenceMassEdit"), plane.reference_mass);
SaveFormProperty(*dialog, _T("DryMassEdit"), plane.dry_mass);
}
static void
UpdatePlane()
{
SaveFormProperty(*dialog, _T("Registration"), plane.registration);
SaveFormProperty(*dialog, _T("CompetitionID"), plane.competition_id);
SaveFormProperty(*dialog, _T("Type"), plane.type);
SaveFormProperty(*dialog, _T("HandicapEdit"), plane.handicap);
SaveFormProperty(*dialog, _T("WingAreaEdit"), plane.wing_area);
SaveFormProperty(*dialog, _T("MaxBallastEdit"), plane.max_ballast);
SaveFormProperty(*dialog, _T("DumpTimeEdit"), plane.dump_time);
SaveFormProperty(*dialog, _T("MaxSpeedEdit"),
UnitGroup::HORIZONTAL_SPEED, plane.max_speed);
}
static void
UpdatePlane()
{
SaveFormProperty(*dialog, _T("V1Edit"), UnitGroup::HORIZONTAL_SPEED, plane.v1);
SaveFormProperty(*dialog, _T("V2Edit"), UnitGroup::HORIZONTAL_SPEED, plane.v2);
SaveFormProperty(*dialog, _T("V3Edit"), UnitGroup::HORIZONTAL_SPEED, plane.v3);
SaveFormProperty(*dialog, _T("W1Edit"), UnitGroup::VERTICAL_SPEED, plane.w1);
SaveFormProperty(*dialog, _T("W2Edit"), UnitGroup::VERTICAL_SPEED, plane.w2);
SaveFormProperty(*dialog, _T("W3Edit"), UnitGroup::VERTICAL_SPEED, plane.w3);
SaveFormProperty(*dialog, _T("ReferenceMassEdit"), plane.reference_mass);
SaveFormProperty(*dialog, _T("DryMassEdit"), plane.dry_mass);
}
bool
SaveFormProperty(const WndForm &form, const TCHAR *field, const TCHAR *reg,
short &value)
{
if (SaveFormProperty(form, field, value)) {
Profile::Set(reg, value);
return true;
} else {
return false;
}
}
static bool
SaveFormToPolar(SubForm &form, PolarInfo &polar)
{
bool changed = SaveFormProperty(form, _T("prpPolarV1"), ugHorizontalSpeed, polar.v1);
changed |= SaveFormProperty(form, _T("prpPolarV2"), ugHorizontalSpeed, polar.v2);
changed |= SaveFormProperty(form, _T("prpPolarV3"), ugHorizontalSpeed, polar.v3);
changed |= SaveFormProperty(form, _T("prpPolarW1"), ugVerticalSpeed, polar.w1);
changed |= SaveFormProperty(form, _T("prpPolarW2"), ugVerticalSpeed, polar.w2);
changed |= SaveFormProperty(form, _T("prpPolarW3"), ugVerticalSpeed, polar.w3);
changed |= SaveFormProperty(form, _T("prpPolarReferenceMass"), polar.reference_mass);
changed |= SaveFormProperty(form, _T("prpPolarMaxBallast"), polar.max_ballast);
changed |= SaveFormProperty(form, _T("prpPolarWingArea"), polar.wing_area);
changed |= SaveFormProperty(form, _T("prpMaxManoeuveringSpeed"),
ugHorizontalSpeed, polar.v_no);
return changed;
}
bool
SaveFormProperty(const WndForm &form, const TCHAR *control_name,
bool &value, const TCHAR *registry_name)
{
assert(control_name != NULL);
assert(registry_name != NULL);
if (!SaveFormProperty(form, control_name, value))
return false;
Profile::Set(registry_name, value);
return true;
}
bool
SaveFormProperty(const WndForm &form, const TCHAR *control_name,
UnitGroup_t unit_group, unsigned &value,
const TCHAR *registry_name)
{
int value2 = value;
if (SaveFormProperty(form, control_name, unit_group, value2,
registry_name)) {
value = value2;
return true;
} else
return false;
}
bool
SaveFormProperty(const WndForm &form, const TCHAR *control_name,
UnitGroup_t unit_group, fixed &value,
const TCHAR *registry_name)
{
assert(registry_name != NULL);
if (!SaveFormProperty(form, control_name, unit_group, value))
return false;
Profile::Set(registry_name, value);
return true;
}
bool
GaugesConfigPanel::Save()
{
bool changed = false;
changed |= SaveFormProperty(*wf, _T("prpEnableFLARMGauge"),
szProfileEnableFLARMGauge,
XCSoarInterface::SetSettingsMap().EnableFLARMGauge);
changed |= SaveFormProperty(*wf, _T("prpAutoCloseFlarmDialog"),
szProfileAutoCloseFlarmDialog,
XCSoarInterface::SetSettingsMap().AutoCloseFlarmDialog);
changed |= SaveFormProperty(*wf, _T("prpEnableTAGauge"),
szProfileEnableTAGauge,
XCSoarInterface::SetSettingsMap().EnableTAGauge);
changed |= SaveFormProperty(*wf, _T("prpEnableThermalProfile"),
szProfileEnableThermalProfile,
XCSoarInterface::SetSettingsMap().EnableThermalProfile);
return changed;
}
bool
InfoBoxContentWind::PnlSetupOnTabPreHide()
{
const NMEAInfo &basic = XCSoarInterface::Basic();
SETTINGS_COMPUTER &settings_computer =
XCSoarInterface::SetSettingsComputer();
const bool external_wind = basic.external_wind_available &&
settings_computer.ExternalWind;
if (!external_wind)
SaveFormProperty(*dlgInfoBoxAccess::GetWindowForm(), _T("prpAutoWind"), szProfileAutoWind,
settings_computer.AutoWindMode);
DataFieldEnum* dfe = (DataFieldEnum*)((WndProperty*)dlgInfoBoxAccess::GetWindowForm()->FindByName(_T("prpAutoWind")))->GetDataField();
if (_tcscmp(dfe->GetAsString(), _("Manual")) == 0)
settings_computer.ManualWindAvailable.Update(basic.clock);
SaveFormProperty(*dlgInfoBoxAccess::GetWindowForm(), _T("prpTrailDrift"),
XCSoarInterface::SetSettingsMap().EnableTrailDrift);
ActionInterface::SendSettingsMap();
return true;
}
void dlgConfigFontsShowModal()
{
wf = LoadDialog(CallBackTable, XCSoarInterface::main_window,
Layout::landscape ?
_T("IDR_XML_CONFIG_FONTS_L") : _T("IDR_XML_CONFIG_FONTS"));
if (wf == NULL)
return;
((WndButton *)wf->FindByName(_T("cmdClose")))->SetOnClickNotify(OnCloseClicked);
UISettings &ui_settings = CommonInterface::SetUISettings();
LoadFormProperty(*wf, _T("prpUseCustomFonts"), ui_settings.custom_fonts);
ShowFontEditButtons(ui_settings.custom_fonts);
RefreshFonts();
FontRegistryChanged = false;
changed = false;
wf->ShowModal();
changed |= SaveFormProperty(*wf, _T("prpUseCustomFonts"),
szProfileUseCustomFonts,
ui_settings.custom_fonts);
TempInfoWindowFont.reset();
TempTitleWindowFont.reset();
TempMapWindowFont.reset();
TempTitleSmallWindowFont.reset();
TempMapWindowBoldFont.reset();
TempCDIWindowFont.reset();
TempMapLabelFont.reset();
TempMapLabelImportantFont.reset();
if (changed) {
Profile::Save();
MessageBoxX(_("Changes to configuration saved. Restart XCSoar to apply changes."),
_T(""), MB_OK);
}
delete wf;
}
bool
PolarConfigPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false;
ComputerSettings &settings_computer = CommonInterface::SetComputerSettings();
changed |= SavePolarShape(form, settings_computer.plane.polar_shape);
changed |= SaveFormProperty(form, _T("prpPolarReferenceMass"),
settings_computer.plane.reference_mass);
changed |= SaveFormProperty(form, _T("prpPolarDryMass"),
settings_computer.plane.dry_mass);
changed |= SaveFormProperty(form, _T("prpPolarMaxBallast"),
settings_computer.plane.max_ballast);
changed |= SaveFormProperty(form, _T("prpPolarWingArea"),
settings_computer.plane.wing_area);
changed |= SaveFormProperty(form, _T("prpMaxManoeuveringSpeed"),
UnitGroup::HORIZONTAL_SPEED,
settings_computer.plane.max_speed);
changed |= SaveFormProperty(form, _T("prpHandicap"),
settings_computer.plane.handicap);
changed |= SaveFormProperty(form, _T("prpBallastSecsToEmpty"),
settings_computer.plane.dump_time);
if (changed) {
PlaneGlue::DetachFromPlaneFile();
PlaneGlue::ToProfile(settings_computer.plane);
PlaneGlue::Synchronize(settings_computer.plane, settings_computer,
settings_computer.polar.glide_polar_task);
if (protected_task_manager != NULL)
protected_task_manager->SetGlidePolar(settings_computer.polar.glide_polar_task);
}
_changed |= changed;
return true;
}
bool
VarioConfigPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false, require_restart = false;
VarioSettings &settings = CommonInterface::SetUISettings().vario;
changed |= SaveFormProperty(form, _T("prpAppGaugeVarioSpeedToFly"),
szProfileAppGaugeVarioSpeedToFly,
settings.ShowSpeedToFly);
changed |= SaveFormProperty(form, _T("prpAppGaugeVarioAvgText"),
szProfileAppGaugeVarioAvgText,
settings.ShowAvgText);
changed |= SaveFormProperty(form, _T("prpAppGaugeVarioMc"),
szProfileAppGaugeVarioMc,
settings.ShowMc);
changed |= SaveFormProperty(form, _T("prpAppGaugeVarioBugs"),
szProfileAppGaugeVarioBugs,
settings.ShowBugs);
changed |= SaveFormProperty(form, _T("prpAppGaugeVarioBallast"),
szProfileAppGaugeVarioBallast,
settings.ShowBallast);
changed |= SaveFormProperty(form, _T("prpAppGaugeVarioGross"),
szProfileAppGaugeVarioGross,
settings.ShowGross);
changed |= SaveFormProperty(form, _T("prpAppAveNeedle"), szProfileAppAveNeedle,
settings.ShowAveNeedle);
_changed |= changed;
_require_restart |= require_restart;
return true;
}
bool
TaskRulesConfigPanel::Save()
{
bool changed = false;
SETTINGS_COMPUTER &settings_computer = XCSoarInterface::SetSettingsComputer();
changed |= SaveFormProperty(*wf, _T("prpStartMaxSpeed"),
ugHorizontalSpeed,
settings_computer.ordered_defaults.start_max_speed,
szProfileStartMaxSpeed);
changed |= SaveFormProperty(*wf, _T("prpStartMaxSpeedMargin"),
ugHorizontalSpeed,
settings_computer.start_max_speed_margin,
szProfileStartMaxSpeedMargin);
changed |= SaveFormProperty(*wf, _T("prpStartMaxHeight"), ugAltitude,
settings_computer.ordered_defaults.start_max_height,
szProfileStartMaxHeight);
changed |= SaveFormProperty(*wf, _T("prpStartMaxHeightMargin"), ugAltitude,
settings_computer.start_max_height_margin,
szProfileStartMaxHeightMargin);
changed |= SaveFormProperty(*wf, _T("prpStartHeightRef"), ugAltitude,
settings_computer.ordered_defaults.start_max_height_ref,
szProfileStartHeightRef);
changed |= SaveFormProperty(*wf, _T("prpFinishMinHeight"), ugAltitude,
settings_computer.ordered_defaults.finish_min_height,
szProfileFinishMinHeight);
unsigned t = settings_computer.contest;
changed |= SaveFormProperty(*wf, _T("prpContests"), szProfileOLCRules, t);
settings_computer.contest = (Contests) t;
return changed;
}
bool
LoggerConfigPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false, require_restart = false;
ComputerSettings &settings_computer =
XCSoarInterface::SetComputerSettings();
Plane &plane = settings_computer.plane;
changed |= SaveFormProperty(form, _T("prpLoggerTimeStepCruise"),
szProfileLoggerTimeStepCruise,
settings_computer.logger_time_step_cruise);
changed |= SaveFormProperty(form, _T("prpLoggerTimeStepCircling"),
szProfileLoggerTimeStepCircling,
settings_computer.logger_time_step_circling);
changed |= SaveFormPropertyToProfile(form, _T("PilotName"),
szProfilePilotName);
changed |= SaveFormProperty(form, _T("AircraftType"), plane.type);
changed |= SaveFormProperty(form, _T("AircraftReg"), plane.registration);
changed |= SaveFormProperty(form, _T("CompetitionID"), plane.competition_id);
changed |= SaveFormPropertyToProfile(form, _T("LoggerID"), szProfileLoggerID);
changed |= SaveFormProperty(form, _T("prpLoggerShortName"),
szProfileLoggerShort,
settings_computer.logger_short_name);
/* GUI label is "Enable Auto Logger" */
changed |= SaveFormPropertyNegated(form, _T("prpDisableAutoLogger"),
szProfileDisableAutoLogger,
settings_computer.auto_logger_disabled);
if (changed)
PlaneGlue::ToProfile(settings_computer.plane);
_changed |= changed;
_require_restart |= require_restart;
return true;
}
bool
LoggerConfigPanel::Save()
{
SETTINGS_COMPUTER &settings_computer =
XCSoarInterface::SetSettingsComputer();
Plane &plane = settings_computer.plane;
bool changed = false;
changed |= SaveFormProperty(*wf, _T("prpLoggerTimeStepCruise"),
szProfileLoggerTimeStepCruise,
settings_computer.LoggerTimeStepCruise);
changed |= SaveFormProperty(*wf, _T("prpLoggerTimeStepCircling"),
szProfileLoggerTimeStepCircling,
settings_computer.LoggerTimeStepCircling);
changed |= SaveFormPropertyToProfile(*wf, _T("PilotName"),
szProfilePilotName);
changed |= SaveFormProperty(*wf, _T("AircraftType"), plane.type);
changed |= SaveFormProperty(*wf, _T("AircraftReg"), plane.registration);
changed |= SaveFormProperty(*wf, _T("CompetitionID"), plane.competition_id);
changed |= SaveFormPropertyToProfile(*wf, _T("LoggerID"), szProfileLoggerID);
changed |= SaveFormProperty(*wf, _T("prpLoggerShortName"),
szProfileLoggerShort,
settings_computer.LoggerShortName);
/* GUI label is "Enable Auto Logger" */
changed |= SaveFormPropertyNegated(*wf, _T("prpDisableAutoLogger"),
szProfileDisableAutoLogger,
settings_computer.DisableAutoLogger);
if (changed)
PlaneGlue::ToProfile(settings_computer.plane);
return changed;
}
bool
PolarConfigPanel::Save(bool &_changed, bool &_require_restart)
{
bool changed = false;
ComputerSettings &settings_computer = XCSoarInterface::SetComputerSettings();
changed |= SaveFormProperty(form, _T("prpPolarV1"), ugHorizontalSpeed,
settings_computer.plane.v1);
changed |= SaveFormProperty(form, _T("prpPolarV2"), ugHorizontalSpeed,
settings_computer.plane.v2);
changed |= SaveFormProperty(form, _T("prpPolarV3"), ugHorizontalSpeed,
settings_computer.plane.v3);
changed |= SaveFormProperty(form, _T("prpPolarW1"), ugVerticalSpeed,
settings_computer.plane.w1);
changed |= SaveFormProperty(form, _T("prpPolarW2"), ugVerticalSpeed,
settings_computer.plane.w2);
changed |= SaveFormProperty(form, _T("prpPolarW3"), ugVerticalSpeed,
settings_computer.plane.w3);
changed |= SaveFormProperty(form, _T("prpPolarReferenceMass"),
settings_computer.plane.reference_mass);
changed |= SaveFormProperty(form, _T("prpPolarDryMass"),
settings_computer.plane.dry_mass);
changed |= SaveFormProperty(form, _T("prpPolarMaxBallast"),
settings_computer.plane.max_ballast);
changed |= SaveFormProperty(form, _T("prpPolarWingArea"),
settings_computer.plane.wing_area);
changed |= SaveFormProperty(form, _T("prpMaxManoeuveringSpeed"),
ugHorizontalSpeed,
settings_computer.plane.max_speed);
changed |= SaveFormProperty(form, _T("prpHandicap"),
settings_computer.plane.handicap);
changed |= SaveFormProperty(form, _T("prpBallastSecsToEmpty"),
settings_computer.plane.dump_time);
if (changed) {
PlaneGlue::ToProfile(settings_computer.plane);
PlaneGlue::Synchronize(settings_computer.plane, settings_computer,
settings_computer.glide_polar_task);
if (protected_task_manager != NULL)
protected_task_manager->SetGlidePolar(settings_computer.glide_polar_task);
}
_changed |= changed;
return true;
}
