/************************************************************************************//**
** \brief USB device reset routine.
** \return none.
**
****************************************************************************************/
void Bulk_Reset(void)
{
/* set device as not configured */
pInformation->Current_Configuration = 0;
/* current feature initialization */
pInformation->Current_Feature = Bulk_ConfigDescriptor[7];
/* set device's the default Interface*/
pInformation->Current_Interface = 0;
/* set based address in USB RAM */
SetBTABLE(BTABLE_ADDRESS);
/* initialize endpoint 0 CONTROL (mandatory) */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* initialize endpoint 1 IN + OUT */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPRxAddr(ENDP1, ENDP1_RXADDR);
SetEPTxCount(ENDP1, BULK_DATA_SIZE);
SetEPRxCount(ENDP1, BULK_DATA_SIZE);
SetEPRxStatus(ENDP1, EP_RX_VALID);
SetEPTxStatus(ENDP1, EP_TX_NAK);
/* set this device to respond on default address */
SetDeviceAddress(0);
/* update device state */
bDeviceState = ATTACHED;
} /*** end of Bulk_Reset ***/
/*******************************************************************************
* Function Name : HID_Reset.
* Description : HID reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void HID_Reset(void)
{
/* Set HID_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
/* Current Feature initialization */
pInformation->Current_Feature = RHID_ConfigDescriptor[7];
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPRxAddr(ENDP1, ENDP1_RXADDR);
SetEPTxCount(ENDP1, EP1TxCount);
SetEPRxCount(ENDP1, EP1RxCount);
SetEPRxStatus(ENDP1, EP_RX_VALID);
SetEPTxStatus(ENDP1, EP_TX_NAK);
/* Set this device to response on default address */
SetDeviceAddress(0);
bDeviceState = ATTACHED;
}
/*******************************************************************************
MASS_Reset: Mass Storage reset routine.
*******************************************************************************/
void MASS_Reset()
{
Device_Info.Current_Configuration = 0; // Set the device as not configured
pInformation->Current_Feature = MASS_ConfigDescriptor[7]; // Current Feature initialization
SetBTABLE(BTABLE_ADDRESS);
// Initialize Endpoint 0
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_NAK);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
//Initialize Endpoint 1
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
// Initialize Endpoint 2
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
// Set the device to response on default address
SetDeviceAddress(0);
bDeviceState = ATTACHED;
CBW.dSignature = BOT_CBW_SIGNATURE;
Bot_State = BOT_IDLE;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Reset
* Description : Virtual_Com_Port Mouse reset routine
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_Reset(void)
{
/* Set Virtual_Com_Port DEVICE as not configured */
pInformation->Current_Configuration = 0;
/* Current Feature initialization */
pInformation->Current_Feature = Virtual_Com_Port_ConfigDescriptor[7];
/* Set Virtual_Com_Port DEVICE with the default Interface*/
pInformation->Current_Interface = 0;
#ifdef STM32F10X_CL
/* EP0 is already configured by USB_SIL_Init() function */
/* Init EP1 IN as Bulk endpoint */
OTG_DEV_EP_Init(EP1_IN, OTG_DEV_EP_TYPE_BULK, VIRTUAL_COM_PORT_DATA_SIZE);
/* Init EP2 IN as Interrupt endpoint */
OTG_DEV_EP_Init(EP2_IN, OTG_DEV_EP_TYPE_INT, VIRTUAL_COM_PORT_INT_SIZE);
/* Init EP3 OUT as Bulk endpoint */
OTG_DEV_EP_Init(EP3_OUT, OTG_DEV_EP_TYPE_BULK, VIRTUAL_COM_PORT_DATA_SIZE);
#else
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
/* Initialize Endpoint 3 */
SetEPType(ENDP3, EP_BULK);
SetEPRxAddr(ENDP3, ENDP3_RXADDR);
SetEPRxCount(ENDP3, VIRTUAL_COM_PORT_DATA_SIZE);
SetEPRxStatus(ENDP3, EP_RX_VALID);
SetEPTxStatus(ENDP3, EP_TX_DIS);
/* Set this device to response on default address */
SetDeviceAddress(0);
#endif /* STM32F10X_CL */
bDeviceState = ATTACHED;
}
/*******************************************************************************
* Function Name : MASS_Reset
* Description : Mass Storage reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void MASS_Reset()
{
/* Set the device as not configured */
Device_Info.Current_Configuration = 0;
/* Current Feature initialization */
pInformation->Current_Feature = MASS_ConfigDescriptor[7];
#ifdef STM32F10X_CL
/* EP0 is already configured by USB_SIL_Init() function */
/* Init EP1 IN as Bulk endpoint */
OTG_DEV_EP_Init(EP1_IN, OTG_DEV_EP_TYPE_BULK, BULK_MAX_PACKET_SIZE);
/* Init EP2 OUT as Bulk endpoint */
OTG_DEV_EP_Init(EP2_OUT, OTG_DEV_EP_TYPE_BULK, BULK_MAX_PACKET_SIZE);
#else
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_NAK);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Set the device to response on default address */
SetDeviceAddress(0);
#endif /* STM32F10X_CL */
bDeviceState = ATTACHED;
CBW.dSignature = BOT_CBW_SIGNATURE;
Bot_State = BOT_IDLE;
//USB_NotConfigured_LED();
}
// Ресет USB
void SomeDev_Reset()
{
// Установка девайса в несконфигурированное состояние
Device_Info.Current_Configuration = 0;
// Инициализация CurrentFeature
pInformation->Current_Feature = SomeDev_ConfigDescriptor[7];
#ifdef STM32F10X_CL
// EP0 уже сконфигурирован в USB_SIL_Init()
// $USBCONFIG - инициализация ендпойнтов
// EP1 IN - Bulk endpoint
OTG_DEV_EP_Init(EP1_IN, OTG_DEV_EP_TYPE_BULK, BULK_MAX_PACKET_SIZE);
// EP2 OUT - Bulk endpoint
OTG_DEV_EP_Init(EP2_OUT, OTG_DEV_EP_TYPE_BULK, BULK_MAX_PACKET_SIZE);
#else
// $USBCONFIG - инициализация ендпойнтов
SetBTABLE(BTABLE_ADDRESS);
// Инициализация Endpoint 0
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_NAK);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
// Инициализация Endpoint 1
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
// Инициализация Endpoint 2
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
// Установка дефолтного адреса
SetDeviceAddress(0);
#endif /}
bDeviceState = ATTACHED;
}
/*******************************************************************************
* Function Name : Joystick_Reset.
* Description : Joystick Mouse reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Joystick_Reset(void)
{
/* Set Joystick_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxCount(ENDP1, 4);
SetEPRxStatus(ENDP1, EP_RX_DIS);
SetEPTxStatus(ENDP1, EP_TX_NAK);
/* Set this device to response on default address */
SetDeviceAddress(0);
}
vsf_err_t stm32_usbd_ep_set_OUT_epsize(uint8_t idx, uint16_t epsize)
{
bool ep0;
int8_t index;
index = stm32_usbd_get_ep(idx);
if (index < 0)
{
return VSFERR_FAIL;
}
ep0 = 0 == idx;
idx = (uint8_t)index;
if ((EP_Cfg_Ptr - epsize) < STM32_USBD_EP_NUM * 8)
{
return VSFERR_NOT_ENOUGH_RESOURCES;
}
stm32_usbd_OUT_epsize[idx] = epsize;
SetEPRxCount(idx, epsize);
// fix for 16-bit aligned memory
EP_Cfg_Ptr -= epsize & 1 ? epsize + 1 : epsize;
SetEPRxAddr(idx, EP_Cfg_Ptr);
if (ep0)
{
SetEPRxStatus(idx, EP_RX_VALID);
}
else
{
SetEPRxStatus(idx, EP_RX_NAK);
}
return VSFERR_NONE;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Reset
* Description : Virtual_Com_Port Mouse reset routine
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_Reset(void)
{
/* Set Virtual_Com_Port DEVICE as not configured */
pInformation->Current_Configuration = 0;
/* Current Feature initialization */
pInformation->Current_Feature = Virtual_Com_Port_ConfigDescriptor[7];
/* Set Virtual_Com_Port DEVICE with the default Interface*/
pInformation->Current_Interface = 0;
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
/* Initialize Endpoint 3 */
SetEPType(ENDP3, EP_BULK);
SetEPRxAddr(ENDP3, ENDP3_RXADDR);
SetEPRxCount(ENDP3, VIRTUAL_COM_PORT_DATA_SIZE);
SetEPRxStatus(ENDP3, EP_RX_VALID);
SetEPTxStatus(ENDP3, EP_TX_DIS);
/* Set this device to response on default address */
SetDeviceAddress(0);
bDeviceState = ATTACHED;
}
void Device_Reset(void) {
/* Set the device as not configured */
pInformation->Current_Configuration = 0;
/* Current feature initialization */
pInformation->Current_Feature = ConfigDescriptor[7];
/* Set the device with the default Interface*/
pInformation->Current_Interface = 0;
SetBTABLE(0x00);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
/* Initialize Endpoint 3 */
SetEPType(ENDP3, EP_BULK);
SetEPRxAddr(ENDP3, ENDP3_RXADDR);
SetEPRxCount(ENDP3, VCP_DATA_SIZE);
SetEPRxStatus(ENDP3, EP_RX_VALID);
SetEPTxStatus(ENDP3, EP_TX_DIS);
/* Set this device to response on default address */
SetDeviceAddress(0);
/* Device attached */
led_off();
}
/*******************************************************************************
Function Name : USBdev_Reset.
Description : USB device reset routine.
Input : None.
Output : None.
Return : None.
*******************************************************************************/
void USBdev_Reset() {
// Set DEVICE as not configured
pInformation->Current_Configuration = 0;
// Current Feature initialization
pInformation->Current_Feature = VCOM_ConfigDescriptor[7];
// Set DEVICE with the default Interface
pInformation->Current_Interface = 0;
// BTABLE_ADDRESS = 0
USB->BTABLE = BTABLE_ADDRESS;
// Initialize Endpoint 0
SetEPType(ENDP0,EP_CONTROL);
SetEPTxStatus(ENDP0,EP_TX_STALL);
SetEPRxAddr(ENDP0,ENDP0_RXADDR);
SetEPTxAddr(ENDP0,ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0,Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
// Initialize Endpoint 1
SetEPType(ENDP1,EP_BULK);
SetEPTxAddr(ENDP1,ENDP1_TXADDR);
SetEPTxStatus(ENDP1,EP_TX_NAK);
SetEPRxStatus(ENDP1,EP_RX_DIS);
// Initialize Endpoint 2
SetEPType(ENDP2,EP_INTERRUPT);
SetEPTxAddr(ENDP2,ENDP2_TXADDR);
SetEPRxStatus(ENDP2,EP_RX_DIS);
SetEPTxStatus(ENDP2,EP_TX_NAK);
// Initialize Endpoint 3
SetEPType(ENDP3,EP_BULK);
SetEPRxAddr(ENDP3,ENDP3_RXADDR);
SetEPRxCount(ENDP3,VCOM_INT_SIZE);
SetEPRxStatus(ENDP3,EP_RX_VALID);
SetEPTxStatus(ENDP3,EP_TX_DIS);
// Set this device to response on default address
SetDeviceAddress(0);
bDeviceState = ATTACHED;
}
/*******************************************************************************
* Function Name : PIOS_HID_Reset.
* Description : Custom HID reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void PIOS_HID_Reset(void)
{
/* Set Joystick_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
/* Current Feature initialization */
pInformation->Current_Feature = PIOS_HID_ConfigDescriptor[7];
#ifdef STM32F10X_CL
/* EP0 is already configured in DFU_Init() by USB_SIL_Init() function */
/* Init EP1 IN as Interrupt endpoint */
OTG_DEV_EP_Init(EP1_IN, OTG_DEV_EP_TYPE_INT, 2);
/* Init EP1 OUT as Interrupt endpoint */
OTG_DEV_EP_Init(EP1_OUT, OTG_DEV_EP_TYPE_INT, 2);
#else
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPRxAddr(ENDP1, ENDP1_RXADDR);
SetEPTxCount(ENDP1, PIOS_USB_HID_DATA_LENGTH+2); /* add two for indicating report id and valid data length */
SetEPRxCount(ENDP1, PIOS_USB_HID_DATA_LENGTH+2);
SetEPRxStatus(ENDP1, EP_RX_VALID);
SetEPTxStatus(ENDP1, EP_TX_NAK);
/* Set this device to response on default address */
SetDeviceAddress(0);
#endif /* STM32F10X_CL */
bDeviceState = ATTACHED;
}
void usbReset(void) {
pInformation->Current_Configuration = 0;
/* current feature is current bmAttributes */
pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELF_POWERED);
_SetBTABLE(USB_BTABLE_ADDRESS);
/* setup control endpoint 0 */
_SetEPType(ENDP0, EP_CONTROL);
_SetEPTxStatus(ENDP0, EP_TX_STALL);
_SetEPRxAddr(ENDP0,VCOM_CTRL_RX_ADDR);
_SetEPTxAddr(ENDP0,VCOM_CTRL_TX_ADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, pProperty->MaxPacketSize);
SetEPRxValid(ENDP0);
/* setup management endpoint 1 */
SetEPType (VCOM_NOTIFICATION_ENDP, EP_INTERRUPT);
SetEPTxAddr (VCOM_NOTIFICATION_ENDP, VCOM_NOTIFICATION_ADDR);
SetEPTxStatus (VCOM_NOTIFICATION_ENDP, EP_TX_NAK);
SetEPRxStatus (VCOM_NOTIFICATION_ENDP, EP_RX_DIS);
/* setup data endpoint OUT (rx) */
/* SetEPType (VCOM_RX_ENDP, EP_BULK); */
/* SetEPRxAddr (VCOM_RX_ENDP, VCOM_RX_ADDR); */
/* SetEPRxCount (VCOM_RX_ENDP, VCOM_RX_EPSIZE); */
/* // SetEPTxStatus (VCOM_RX_ENDP, EP_TX_DIS); */
/* SetEPRxStatus (VCOM_RX_ENDP, EP_RX_VALID); */
SetEPType (3, EP_BULK);
SetEPRxAddr (3, 0x110);
SetEPRxCount (3,64);
// SetEPTxStatus (VCOM_RX_ENDP, EP_TX_DIS);
SetEPRxStatus (3, EP_RX_VALID);
/* setup data endpoint IN (tx) */
SetEPType (VCOM_TX_ENDP, EP_BULK);
SetEPTxAddr (VCOM_TX_ENDP, VCOM_TX_ADDR);
SetEPTxStatus (VCOM_TX_ENDP, EP_TX_NAK);
SetEPRxStatus (VCOM_TX_ENDP, EP_RX_DIS);
bDeviceState = ATTACHED;
SetDeviceAddress(0);
/* reset the rx fifo */
recvBufIn = 0;
recvBufOut = 0;
maxNewBytes = VCOM_RX_EPSIZE;
countTx = 0;
}
/*******************************************************************************
* Function Name : CustomHID_Reset.
* Description : Custom HID reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void CustomHID_Reset(void)
{
/* Set Joystick_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
/* Current Feature initialization */
pInformation->Current_Feature = CustomHID_ConfigDescriptor[7];
*(volatile unsigned *)(0x40005C50L)=(0x00&0xFFF8);//设置USB分组缓冲区描述表起始地址：0
/* Initialize Endpoint 0 */
//设置EP0控制端点 ENDP0 ((u8)0) EP_CONTROL (0x0200)
*(((volatile unsigned *)(0x40005C00L)) + ENDP0)=((_GetENDPOINT(ENDP0) & 0x898f) | EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL); //设置EP0端点发送延迟
SetEPRxAddr(ENDP0, ENDP0_RXADDR); //设置EP0的接受地址 ENDP0_RXADDR (0x18)
SetEPTxAddr(ENDP0, ENDP0_TXADDR); //设置EP0的发送地址 ENDP0_TXADDR (0x58)
_ClearEP_KIND(ENDP0); //设置端点EP0的类型DBL_BUF 双缓冲端点
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize); //设置EP0的计数器的值
_SetEPRxStatus(ENDP0, EP_RX_VALID); //设置端点接受有效 EP_RX_VALID=0x3000
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPRxAddr(ENDP1, ENDP1_RXADDR); //ADDR内部寄存器被用作当前缓冲区的指针 ENDP1_RXADDR=(0x98)
SetEPRxCount(ENDP1, 22); //COUNT寄存器用于记录剩下未传输的字节数
SetEPRxStatus(ENDP1, EP_RX_VALID); //设置端点接受有效 EP_RX_VALID=0x3000
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPTxCount(ENDP2, 22);
SetEPTxStatus(ENDP2, EP_TX_NAK);//设置端点发送不应答 EP_TX_NAK=(0x0020)
bDeviceState = ATTACHED; //ATTACHED=1
/* Set this device to response on default address */
SetDeviceAddress(0);
}
/*******************************************************************************
* Function Name : MASS_Reset
* Description : Mass Storage reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void MASS_Reset()
{
/* Set the device as not configured */
Device_Info.Current_Configuration = 0;
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_NAK);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Set the device to response on default address */
SetDeviceAddress(0);
CBW.dSignature = BOT_CBW_SIGNATURE;
Bot_State = BOT_IDLE;
}
/*******************************************************************************
* Function Name : Speaker_Reset.
* Description : Speaker reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Speaker_Reset()
{
/* Set Speaker device as not configured state */
pInformation->Current_Configuration = 0;
/* Current Feature initialization */
pInformation->Current_Feature = Speaker_ConfigDescriptor[7];
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_NAK);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_ISOCHRONOUS);
SetEPDoubleBuff(ENDP4);
SetEPDblBuffAddr(ENDP1, ENDP1_BUF0Addr, ENDP1_BUF1Addr);
SetEPDblBuffCount(ENDP1, EP_DBUF_IN, PACKET_SIZE);
ClearDTOG_RX(ENDP1);
ClearDTOG_TX(ENDP1);
SetEPRxStatus(ENDP1, EP_RX_DIS);
SetEPTxStatus(ENDP1, EP_TX_VALID);
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPTxCount(ENDP2, 0x40);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
SetEPType(ENDP3, EP_INTERRUPT);
SetEPTxAddr(ENDP3, ENDP3_TXADDR);
SetEPTxCount(ENDP3, 0x40);
SetEPRxStatus(ENDP3, EP_RX_DIS);
SetEPTxStatus(ENDP3, EP_TX_NAK);
SetEPRxValid(ENDP0);
/* Set this device to response on default address */
SetDeviceAddress(0);
bDeviceState = ATTACHED;
}
void monkey_ep_reset(void) {
int i;
/* Set Joystick_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
/* Current Feature initialization */
pInformation->Current_Feature = config1_descriptor[7];
for(i=0; i<8; ++i) {
if(ep_conf_list[i].direct==0) continue;
switch(ep_conf_list[i].attr) {
case 0x00:
SetEPType(i, EP_BULK);
ClearEPDoubleBuff(i);
break;
case 0x01:
SetEPType(i, EP_CONTROL);
Clear_Status_Out(i);
break;
case 0x02:
SetEPType(i, EP_ISOCHRONOUS);
break;
case 0x03:
SetEPType(i, EP_INTERRUPT);
break;
}
if(ep_conf_list[i].direct & EP_IN) {
SetEPTxStatus(i, ep_conf_list[i].tx_status);
SetEPTxAddr(i, ep_conf_list[i].tx_addr);
SetEPTxCount(i, ep_conf_list[i].tx_max);
}
if(ep_conf_list[i].direct & EP_OUT) {
SetEPRxAddr(i, ep_conf_list[i].rx_addr);
SetEPRxCount(i, ep_conf_list[i].rx_max);
SetEPRxStatus(i, ep_conf_list[i].rx_status);
}
}
}
/*******************************************************************************
* Function Name : Microphone_Reset.
* Description : Microphone reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Microphone_Reset()
{
/* Set Microphone device as not configured state */
pInformation->Current_Configuration = 0;
/* Current Feature initialization */
pInformation->Current_Feature = Microphone_ConfigDescriptor[7];
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_NAK);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_ISOCHRONOUS);
SetEPDblBuffAddr(ENDP1, ENDP1_BUF0Addr, ENDP1_BUF1Addr);
//SetEPDblBuffCount(ENDP1, EP_DBUF_IN, 0x40);
SetEPDblBuffCount(ENDP1, EP_DBUF_IN, 0x60);
ClearDTOG_RX(ENDP1);
ClearDTOG_TX(ENDP1);
ToggleDTOG_TX(ENDP1);
SetEPRxStatus(ENDP1, EP_RX_DIS);
SetEPTxStatus(ENDP1, EP_TX_VALID);
SetEPRxValid(ENDP0);
/* Set this device to response on default address */
SetDeviceAddress(0);
bDeviceState = ATTACHED;
//In_Data_Offset = 0;
//Out_Data_Offset = 0;
}
/*******************************************************************************
Function Name : Speaker_Reset.
Description : Speaker reset routine.
Input : None.
Output : None.
Return : None.
*******************************************************************************/
void Speaker_Reset() {
// Set Speaker device as not configured state
pInformation->Current_Configuration = 0;
// Current Feature initialization
pInformation->Current_Feature = Speaker_ConfigDescriptor[7];
// *BTABLE = BTABLE_ADDRESS & 0xFFF8;
*BTABLE = BTABLE_ADDRESS; // BTABLE_ADDRESS = 0
// Initialize Endpoint 0
SetEPType(ENDP0,EP_CONTROL);
SetEPTxStatus(ENDP0,EP_TX_NAK);
SetEPRxAddr(ENDP0,ENDP0_RXADDR);
SetEPRxCount(ENDP0,Device_Property.MaxPacketSize);
SetEPTxAddr(ENDP0,ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxValid(ENDP0);
// Initialize Endpoint 1
SetEPType(ENDP1,EP_ISOCHRONOUS);
SetEPDblBuffAddr(ENDP1,ENDP1_BUF0Addr,ENDP1_BUF1Addr);
SetEPDblBuffCount(ENDP1,EP_DBUF_OUT,0x40);
ClearDTOG_RX(ENDP1);
ClearDTOG_TX(ENDP1);
ToggleDTOG_TX(ENDP1);
SetEPRxStatus(ENDP1,EP_RX_VALID);
SetEPTxStatus(ENDP1,EP_TX_DIS);
SetEPRxValid(ENDP0);
// Set this device to response on default address
SetDeviceAddress(0);
bDeviceState = ATTACHED;
In_Data_Offset = 0;
Out_Data_Offset = 0;
}
/**
* @brief Configure an EP
* @param pdev : Device instance
* @param ep_addr: endpoint address
* @param ep_mps: endpoint max packet size
* @param ep_type: endpoint Type
*/
uint32_t DCD_EP_Open(USB_CORE_HANDLE *pdev ,
uint16_t ep_addr,
uint16_t ep_mps,
uint8_t ep_type)
{
USB_EP *ep;
/* initialize ep structure*/
if ((ep_addr & 0x80) == 0x80)
{
ep = &pdev->dev.in_ep[ep_addr & 0x7F];
ep->is_in = 1;
}
else
{
ep = &pdev->dev.out_ep[ep_addr & 0x7F];
ep->is_in = 0;
}
ep->maxpacket = ep_mps;
ep->type = ep_type;
ep->num = ep_addr & 0x7F;
if (ep->num == 0)
{
/* Initialize the control transfer variables*/
ep->ctl_data_len =0;
ep->rem_data_len = 0;
ep->total_data_len = 0;
}
/* Initialize the transaction level variables */
ep->xfer_buff = 0;
ep->xfer_len = 0;
ep->xfer_count = 0;
ep->is_stall = 0;
/* initialize HW */
switch (ep->type)
{
case USB_EP_CONTROL:
SetEPType(ep->num, EP_CONTROL);
break;
case USB_EP_BULK:
SetEPType(ep->num, EP_BULK);
break;
case USB_EP_INT:
SetEPType(ep->num, EP_INTERRUPT);
break;
case USB_EP_ISOC:
SetEPType(ep->num, EP_ISOCHRONOUS);
break;
}
if (ep->doublebuffer == 0)
{
if (ep->is_in)
{
/*Set the endpoint Transmit buffer address */
SetEPTxAddr(ep->num, ep->pmaadress);
ClearDTOG_TX(ep->num);
/* Configure NAK status for the Endpoint*/
SetEPTxStatus(ep->num, EP_TX_NAK);
}
else
{
/*Set the endpoint Receive buffer address */
SetEPRxAddr(ep->num, ep->pmaadress);
/*Set the endpoint Receive buffer counter*/
SetEPRxCount(ep->num, ep->maxpacket);
ClearDTOG_RX(ep->num);
/* Configure VALID status for the Endpoint*/
SetEPRxStatus(ep->num, EP_RX_VALID);
}
}
/*Double Buffer*/
else
{
/*Set the endpoint as double buffered*/
SetEPDoubleBuff(ep->num);
/*Set buffer address for double buffered mode*/
SetEPDblBuffAddr(ep->num,ep->pmaaddr0, ep->pmaaddr1);
if (ep->is_in==0)
{
/* Clear the data toggle bits for the endpoint IN/OUT*/
ClearDTOG_RX(ep->num);
ClearDTOG_TX(ep->num);
/* Reset value of the data toggle bits for the endpoint out*/
ToggleDTOG_TX(ep->num);
SetEPRxStatus(ep->num, EP_RX_VALID);
SetEPTxStatus(ep->num, EP_TX_DIS);
}
else
{
/* Clear the data toggle bits for the endpoint IN/OUT*/
ClearDTOG_RX(ep->num);
ClearDTOG_TX(ep->num);
ToggleDTOG_RX(ep->num);
/* Configure DISABLE status for the Endpoint*/
SetEPTxStatus(ep->num, EP_TX_DIS);
SetEPRxStatus(ep->num, EP_RX_DIS);
}
}
return USB_OK;
}
/*******************************************************************************
* Function Name : USB_Reset
* Description : USB reset routine
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_Reset(void)
{
/* Set USB DEVICE as not configured */
pInformation->Current_Configuration = 0;
/* Set USB DEVICE with the default Interface*/
pInformation->Current_Interface = 0;
#ifdef USB_CDC_ENABLE
/* Current Feature initialization */
pInformation->Current_Feature = CDC_ConfigDescriptor[7];
#endif
#ifdef USB_HID_ENABLE
/* Current Feature initialization */
pInformation->Current_Feature = HID_ConfigDescriptor[7];
#endif
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
#ifdef USB_CDC_ENABLE
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
/* Initialize Endpoint 3 */
SetEPType(ENDP3, EP_BULK);
SetEPRxAddr(ENDP3, ENDP3_RXADDR);
SetEPRxCount(ENDP3, CDC_DATA_SIZE);
SetEPRxStatus(ENDP3, EP_RX_VALID);
SetEPTxStatus(ENDP3, EP_TX_DIS);
#endif
#ifdef USB_HID_ENABLE
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
#if defined (SPARK_USB_MOUSE)
SetEPTxCount(ENDP1, 4);
#elif defined (SPARK_USB_KEYBOARD)
SetEPTxCount(ENDP1, 8);
#endif
SetEPRxStatus(ENDP1, EP_RX_DIS);
SetEPTxStatus(ENDP1, EP_TX_NAK);
#endif
/* Set this device to response on default address */
SetDeviceAddress(0);
bDeviceState = ATTACHED;
}
/*******************************************************************************
* Function Name : Virtual_Com_Port_Reset
* Description : Virtual_Com_Port Mouse reset routine
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void Virtual_Com_Port_Reset(void)
{
/* Set Virtual_Com_Port_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR); //GS 0x40 64
SetEPTxAddr(ENDP0, ENDP0_TXADDR); //GS 0x80 128
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/*-------------------------------------------------------------*/
/* -------------- Buffer Description Table -----------------*/
/*-------------------------------------------------------------*/
//#define VIRTUAL_COM_PORT_DATA_SIZE 64
/* EP0 */
/* rx/tx buffer base address */
//#define ENDP0_RXADDR (0x40)
//#define ENDP0_TXADDR (0x80)
/* EP1 */
/* tx buffer base address */
//#define ENDP1_BUFF0_ADDR (0xC0)
//#define ENDP1_BUFF1_ADDR (0x100)
//#define ENDP2_BUFF0_ADDR (0x1C0)
//#define ENDP2_BUFF1_ADDR (0x1D0)
// Initialize Endpoint 1
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_BUFF_ADDR);
SetEPRxCount(ENDP1,64);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
// Initialize Endpoint 2
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_BUFF_ADDR);
SetEPRxCount(ENDP2, 64);
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
// Initialize Endpoint 3 // IN cmd
SetEPType(ENDP3, EP_BULK);
SetEPTxAddr(ENDP3, ENDP3_BUFF_ADDR);
SetEPRxCount(ENDP3, 64);
SetEPTxStatus(ENDP3, EP_TX_NAK);
SetEPRxStatus(ENDP3, EP_RX_DIS);
// Initialize Endpoint 4 // OUT cmd
SetEPType(ENDP4, EP_BULK);
SetEPRxAddr(ENDP4, ENDP4_BUFF_ADDR);
SetEPRxCount(ENDP4, 64);
SetEPRxStatus(ENDP4, EP_RX_VALID);
SetEPTxStatus(ENDP4, EP_TX_DIS);
/* Set this device to respsonse on default address */
SetDeviceAddress(0);
}
/*******************************************************************************
* Function Name : Joystick_Reset.
* Description : Joystick Mouse reset routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_APP_Reset(void)
{
/* Set Joystick_DEVICE as not configured */
pInformation->Current_Configuration = 0;
/* Current Feature initialization */
#if(USB_DEVICE_CONFIG & _USE_USB_VIRTUAL_COMM_DEVICE)
if (g_usb_type == USB_VIRTUAL_PORT)
{
pInformation->Current_Interface = 0;
pInformation->Current_Feature = Virtual_Com_Port_ConfigDescriptor[7];
}
else
#endif
#if(USB_DEVICE_CONFIG & _USE_USB_KEYBOARD_DEVICE)
if(g_usb_type == USB_KEYBOARD)
{
pInformation->Current_Interface = 0;
pInformation->Current_Feature = Keyboard_ConfigDescriptor[7];
}
else
#endif
#if(USB_DEVICE_CONFIG & _USE_USB_MASS_STOARGE_DEVICE)
{
pInformation->Current_Feature = MASS_ConfigDescriptor[7];
}
#endif
#if(USB_DEVICE_CONFIG & _USE_USB_PRINTER_DEVICE)
{
pInformation->Current_Interface = 0;
pInformation->Current_Feature = Printer_ConfigDescriptor[7];
}
#endif
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
#if(USB_DEVICE_CONFIG & _USE_USB_VIRTUAL_COMM_DEVICE)
if (g_usb_type == USB_VIRTUAL_PORT)
{
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_INTERRUPT);
SetEPTxAddr(ENDP2, ENDP2_TXADDR);
SetEPRxStatus(ENDP2, EP_RX_DIS);
SetEPTxStatus(ENDP2, EP_TX_NAK);
/* Initialize Endpoint 3 */
SetEPType(ENDP3, EP_BULK);
SetEPRxAddr(ENDP3, ENDP3_RXADDR);
SetEPRxCount(ENDP3, VIRTUAL_COM_PORT_DATA_SIZE);
SetEPRxStatus(ENDP3, EP_RX_VALID);
SetEPTxStatus(ENDP3, EP_TX_DIS);
}
else
#endif
#if(USB_DEVICE_CONFIG & _USE_USB_KEYBOARD_DEVICE)
if(g_usb_type == USB_KEYBOARD)
{
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxCount(ENDP1, 1);
SetEPRxStatus(ENDP1, EP_RX_DIS);
SetEPTxStatus(ENDP1, EP_TX_NAK);
}
else
#endif
#if(USB_DEVICE_CONFIG & _USE_USB_MASS_STOARGE_DEVICE)
{
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
//SetEPRxCount(ENDP2, 0x40); //joe ÐÞ¸Ä
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
CBW.dSignature = BOT_CBW_SIGNATURE;
Bot_State = BOT_IDLE;
}
#endif
#if(USB_DEVICE_CONFIG & _USE_USB_PRINTER_DEVICE)
{
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_BULK);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPTxStatus(ENDP1, EP_TX_NAK);
SetEPRxStatus(ENDP1, EP_RX_DIS);
/* Initialize Endpoint 2 */
SetEPType(ENDP2, EP_BULK);
SetEPRxAddr(ENDP2, ENDP2_RXADDR);
SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
//SetEPRxCount(ENDP2, 0x40); //joe ÐÞ¸Ä
SetEPRxStatus(ENDP2, EP_RX_VALID);
SetEPTxStatus(ENDP2, EP_TX_DIS);
}
#endif
bDeviceState = ATTACHED;
/* Set this device to response on default address */
SetDeviceAddress(0);
}