status_t
OHCI::Start()
{
TRACE("starting OHCI host controller\n");
uint32 control = _ReadReg(OHCI_CONTROL);
if ((control & OHCI_HC_FUNCTIONAL_STATE_MASK)
!= OHCI_HC_FUNCTIONAL_STATE_OPERATIONAL) {
TRACE_ERROR("controller not started (0x%08lx)!\n", control);
return B_ERROR;
} else
TRACE("controller is operational!\n");
fRootHubAddress = AllocateAddress();
fRootHub = new(std::nothrow) OHCIRootHub(RootObject(), fRootHubAddress);
if (!fRootHub) {
TRACE_ERROR("no memory to allocate root hub\n");
return B_NO_MEMORY;
}
if (fRootHub->InitCheck() < B_OK) {
TRACE_ERROR("root hub failed init check\n");
return B_ERROR;
}
SetRootHub(fRootHub);
TRACE_ALWAYS("successfully started the controller\n");
return BusManager::Start();
}
void CMhcd::DeviceDeInitialize( void )
{
DEBUGMSG(ZONE_UHCD && ZONE_VERBOSE, (TEXT("+CEhcd::DeInitialize\n")));
// make the API set inaccessible
CRootHub *pRoot = SetRootHub(NULL);
// signal root hub to close
if ( pRoot ) {
pRoot->HandleDetach();
delete pRoot;
}
// this is safe because by now all clients have been unloaded
//DeleteCriticalSection ( &m_csHCLock );
CHW::DeInitialize();
CDeviceGlobal::DeInitialize();
DEBUGMSG(ZONE_UHCD && ZONE_VERBOSE, (TEXT("-CEhcd::DeInitialize\n")));
}
// ******************************************************************
CMhcd::~CMhcd()
//
// Purpose: Destroy all memory and objects associated with this class
//
// Parameters: None
//
// Returns: Nothing
//
// Notes:
// ******************************************************************
{
DEBUGMSG(ZONE_UHCD && ZONE_VERBOSE, (TEXT("+CMhcd::~CMhcd\n")));
// make the API set inaccessible
CRootHub *pRoot = SetRootHub(NULL);
// signal root hub to close
if ( pRoot ) {
pRoot->HandleDetach();
delete pRoot;
}
DEBUGMSG(ZONE_UHCD && ZONE_VERBOSE, (TEXT("-CMhcd::~CMhcd\n")));
}
// ******************************************************************
BOOL CMhcd::DeviceInitialize()
//
// Purpose: Set up the Host Controller hardware, associated data structures,
// and threads so that schedule processing can begin.
//
// Parameters: pvUhcdPddObject - pointer to the PDD object for this driver
//
// pCPhysMem - pointer to class for managing physical memory
//
// szDriverRegistryKey - unused ?
//
// portBase - base address for USB registers
//
// dwSysIntr - interrupt identifier for USB interrupts
//
// Returns: TRUE - if initializes successfully and is ready to process
// the schedule
// FALSE - if setup fails
//
// Notes: This function is called by right after the constructor.
// It is the starting point for all initialization.
//
// This needs to be implemented for HCDI
// ******************************************************************
{
DEBUGMSG(ZONE_INIT,(TEXT("+CEhcd::Initialize. Entry\r\n")));
// All Initialize routines must be called, so we can't write
// if ( !CDevice::Initialize() || !CPipe::Initialize() etc )
// due to short circuit eval.
{
m_pMem ->ReInit();
BOOL fCDeviceInitOK = CDeviceGlobal::Initialize(this);
BOOL fCHWInitOK = CHW::Initialize( );
if ( !fCDeviceInitOK || !fCHWInitOK ) {
DEBUGMSG(ZONE_ERROR, (TEXT("-CEhcd::Initialize. Error - could not initialize device/pipe/hw classes\n")));
ASSERT(FALSE);
return FALSE;
}
}
// set up the root hub object
{
USB_DEVICE_INFO deviceInfo;
USB_HUB_DESCRIPTOR usbHubDescriptor;
deviceInfo.dwCount = sizeof( USB_DEVICE_INFO );
deviceInfo.lpConfigs = NULL;
deviceInfo.lpActiveConfig = NULL;
deviceInfo.Descriptor.bLength = sizeof( USB_DEVICE_DESCRIPTOR );
deviceInfo.Descriptor.bDescriptorType = USB_DEVICE_DESCRIPTOR_TYPE;
deviceInfo.Descriptor.bcdUSB = 0x200; // USB spec 200
deviceInfo.Descriptor.bDeviceClass = USB_DEVICE_CLASS_HUB;
deviceInfo.Descriptor.bDeviceSubClass = 0xff;
deviceInfo.Descriptor.bDeviceProtocol = 0xff;
deviceInfo.Descriptor.bMaxPacketSize0 = 0;
deviceInfo.Descriptor.bNumConfigurations = 0;
usbHubDescriptor.bDescriptorType = USB_HUB_DESCRIPTOR_TYPE;
usbHubDescriptor.bDescriptorLength = USB_HUB_DESCRIPTOR_MINIMUM_SIZE;
usbHubDescriptor.bNumberOfPorts = (BYTE)GetNumberOfPort();
usbHubDescriptor.wHubCharacteristics = USB_HUB_CHARACTERISTIC_NO_POWER_SWITCHING |
USB_HUB_CHARACTERISTIC_NOT_PART_OF_COMPOUND_DEVICE |
USB_HUB_CHARACTERISTIC_NO_OVER_CURRENT_PROTECTION;
usbHubDescriptor.bPowerOnToPowerGood = 0;
usbHubDescriptor.bHubControlCurrent = 0;
DEBUGCHK( usbHubDescriptor.bNumberOfPorts <= 8 );
usbHubDescriptor.bRemoveAndPowerMask[0] = 0; // all devices on hub are removable
usbHubDescriptor.bRemoveAndPowerMask[1] = 0xFF; // must be 0xFF, USB spec 1.1, table 11-8
// FALSE indicates root hub is not low speed
// (though, this is ignored for hubs anyway)
SetRootHub( new CRootHub( deviceInfo, FALSE,TRUE, usbHubDescriptor,this ));
}
if ( !GetRootHub() ) {
DEBUGMSG( ZONE_ERROR, (TEXT("-CMhcd::Initialize - unable to create root hub object\n")) );
return FALSE;
}
// Signal root hub to start processing port changes
// The root hub doesn't have any pipes, so we pass NULL as the
// endpoint0 pipe
if ( !GetRootHub()->EnterOperationalState( NULL ) ) {
DEBUGMSG(ZONE_ERROR, (TEXT("-CEhcd::Initialize. Error initializing root hub\n")));
return FALSE;
}
// Start processing frames
CHW::EnterOperationalState();
DEBUGMSG(ZONE_INIT,(TEXT("-CMhcd::Initialize. Success!!\r\n")));
return TRUE;
}
