void SkRRect::setRectXY(const SkRect& rect, SkScalar xRad, SkScalar yRad) {
if (rect.isEmpty() || !rect.isFinite()) {
this->setEmpty();
return;
}
if (!SkScalarsAreFinite(xRad, yRad)) {
xRad = yRad = 0; // devolve into a simple rect
}
if (xRad <= 0 || yRad <= 0) {
// all corners are square in this case
this->setRect(rect);
return;
}
if (rect.width() < xRad+xRad || rect.height() < yRad+yRad) {
SkScalar scale = SkMinScalar(rect.width() / (xRad + xRad), rect.height() / (yRad + yRad));
SkASSERT(scale < SK_Scalar1);
xRad = SkScalarMul(xRad, scale);
yRad = SkScalarMul(yRad, scale);
}
fRect = rect;
for (int i = 0; i < 4; ++i) {
fRadii[i].set(xRad, yRad);
}
fType = kSimple_Type;
if (xRad >= SkScalarHalf(fRect.width()) && yRad >= SkScalarHalf(fRect.height())) {
fType = kOval_Type;
// TODO: assert that all the x&y radii are already W/2 & H/2
}
SkDEBUGCODE(this->validate();)
}
sk_sp<SkPathEffect> SkStrokePathEffect::Make(SkScalar width, SkPaint::Join join, SkPaint::Cap cap,
SkScalar miter) {
if (!SkScalarsAreFinite(width, miter) || width < 0 || miter < 0) {
return nullptr;
}
return sk_sp<SkPathEffect>(new SkStrokePE(width, join, cap, miter));
}
void SkRRect::setNinePatch(const SkRect& rect, SkScalar leftRad, SkScalar topRad,
SkScalar rightRad, SkScalar bottomRad) {
if (rect.isEmpty() || !rect.isFinite()) {
this->setEmpty();
return;
}
const SkScalar array[4] = { leftRad, topRad, rightRad, bottomRad };
if (!SkScalarsAreFinite(array, 4)) {
this->setRect(rect); // devolve into a simple rect
return;
}
leftRad = SkMaxScalar(leftRad, 0);
topRad = SkMaxScalar(topRad, 0);
rightRad = SkMaxScalar(rightRad, 0);
bottomRad = SkMaxScalar(bottomRad, 0);
SkScalar scale = SK_Scalar1;
if (leftRad + rightRad > rect.width()) {
scale = rect.width() / (leftRad + rightRad);
}
if (topRad + bottomRad > rect.height()) {
scale = SkMinScalar(scale, rect.height() / (topRad + bottomRad));
}
if (scale < SK_Scalar1) {
leftRad = SkScalarMul(leftRad, scale);
topRad = SkScalarMul(topRad, scale);
rightRad = SkScalarMul(rightRad, scale);
bottomRad = SkScalarMul(bottomRad, scale);
}
if (leftRad == rightRad && topRad == bottomRad) {
if (leftRad >= SkScalarHalf(rect.width()) && topRad >= SkScalarHalf(rect.height())) {
fType = kOval_Type;
} else if (0 == leftRad || 0 == topRad) {
// If the left and (by equality check above) right radii are zero then it is a rect.
// Same goes for top/bottom.
fType = kRect_Type;
leftRad = 0;
topRad = 0;
rightRad = 0;
bottomRad = 0;
} else {
fType = kSimple_Type;
}
} else {
fType = kNinePatch_Type;
}
fRect = rect;
fRadii[kUpperLeft_Corner].set(leftRad, topRad);
fRadii[kUpperRight_Corner].set(rightRad, topRad);
fRadii[kLowerRight_Corner].set(rightRad, bottomRad);
fRadii[kLowerLeft_Corner].set(leftRad, bottomRad);
SkDEBUGCODE(this->validate();)
}
bool SkDCubic::toFloatPoints(SkPoint* pts) const {
const double* dCubic = &fPts[0].fX;
SkScalar* cubic = &pts[0].fX;
for (int index = 0; index < kPointCount * 2; ++index) {
*cubic++ = SkDoubleToScalar(*dCubic++);
}
return SkScalarsAreFinite(&pts->fX, kPointCount * 2);
}
sk_sp<SkPathEffect> SkTrimPathEffect::Make(SkScalar startT, SkScalar stopT, Mode mode) {
if (!SkScalarsAreFinite(startT, stopT)) {
return nullptr;
}
if (startT <= 0 && stopT >= 1 && mode == Mode::kNormal) {
return nullptr;
}
startT = SkTPin(startT, 0.f, 1.f);
stopT = SkTPin(stopT, 0.f, 1.f);
if (startT >= stopT && mode == Mode::kInverted) {
return nullptr;
}
return sk_sp<SkPathEffect>(new SkTrimPE(startT, stopT, mode));
}
void SkRRect::setRectRadii(const SkRect& rect, const SkVector radii[4]) {
fRect = rect;
fRect.sort();
if (fRect.isEmpty() || !fRect.isFinite()) {
this->setEmpty();
return;
}
if (!SkScalarsAreFinite(&radii[0].fX, 8)) {
this->setRect(rect); // devolve into a simple rect
return;
}
memcpy(fRadii, radii, sizeof(fRadii));
bool allCornersSquare = true;
// Clamp negative radii to zero
for (int i = 0; i < 4; ++i) {
if (fRadii[i].fX <= 0 || fRadii[i].fY <= 0) {
// In this case we are being a little fast & loose. Since one of
// the radii is 0 the corner is square. However, the other radii
// could still be non-zero and play in the global scale factor
// computation.
fRadii[i].fX = 0;
fRadii[i].fY = 0;
} else {
allCornersSquare = false;
}
}
if (allCornersSquare) {
this->setRect(rect);
return;
}
this->scaleRadii();
}
sk_sp<SkShader> SkShader::MakeColorShader(const SkColor4f& color, sk_sp<SkColorSpace> space) {
if (!SkScalarsAreFinite(color.vec(), 4)) {
return nullptr;
}
return sk_make_sp<SkColor4Shader>(color, std::move(space));
}
void SkRRect::setRectRadii(const SkRect& rect, const SkVector radii[4]) {
fRect = rect;
fRect.sort();
if (fRect.isEmpty() || !fRect.isFinite()) {
this->setEmpty();
return;
}
if (!SkScalarsAreFinite(&radii[0].fX, 8)) {
this->setRect(rect); // devolve into a simple rect
return;
}
memcpy(fRadii, radii, sizeof(fRadii));
bool allCornersSquare = true;
// Clamp negative radii to zero
for (int i = 0; i < 4; ++i) {
if (fRadii[i].fX <= 0 || fRadii[i].fY <= 0) {
// In this case we are being a little fast & loose. Since one of
// the radii is 0 the corner is square. However, the other radii
// could still be non-zero and play in the global scale factor
// computation.
fRadii[i].fX = 0;
fRadii[i].fY = 0;
} else {
allCornersSquare = false;
}
}
if (allCornersSquare) {
this->setRect(rect);
return;
}
// Proportionally scale down all radii to fit. Find the minimum ratio
// of a side and the radii on that side (for all four sides) and use
// that to scale down _all_ the radii. This algorithm is from the
// W3 spec (http://www.w3.org/TR/css3-background/) section 5.5 - Overlapping
// Curves:
// "Let f = min(Li/Si), where i is one of { top, right, bottom, left },
// Si is the sum of the two corresponding radii of the corners on side i,
// and Ltop = Lbottom = the width of the box,
// and Lleft = Lright = the height of the box.
// If f < 1, then all corner radii are reduced by multiplying them by f."
double scale = 1.0;
scale = compute_min_scale(fRadii[0].fX, fRadii[1].fX, fRect.width(), scale);
scale = compute_min_scale(fRadii[1].fY, fRadii[2].fY, fRect.height(), scale);
scale = compute_min_scale(fRadii[2].fX, fRadii[3].fX, fRect.width(), scale);
scale = compute_min_scale(fRadii[3].fY, fRadii[0].fY, fRect.height(), scale);
if (scale < 1.0) {
for (int i = 0; i < 4; ++i) {
fRadii[i].fX *= scale;
fRadii[i].fY *= scale;
}
}
// skbug.com/3239 -- its possible that we can hit the following inconsistency:
// rad == bounds.bottom - bounds.top
// bounds.bottom - radius < bounds.top
// YIKES
// We need to detect and "fix" this now, otherwise we can have the following wackiness:
// path.addRRect(rrect);
// rrect.rect() != path.getBounds()
for (int i = 0; i < 4; ++i) {
fRadii[i].fX = clamp_radius_check_predicates(fRadii[i].fX, fRect.fLeft, fRect.fRight);
fRadii[i].fY = clamp_radius_check_predicates(fRadii[i].fY, fRect.fTop, fRect.fBottom);
}
// At this point we're either oval, simple, or complex (not empty or rect).
this->computeType();
SkDEBUGCODE(this->validate();)
}
bool SkOpEdgeBuilder::walk() {
uint8_t* verbPtr = fPathVerbs.begin();
uint8_t* endOfFirstHalf = &verbPtr[fSecondHalf];
SkPoint* pointsPtr = fPathPts.begin() - 1;
SkScalar* weightPtr = fWeights.begin();
SkPath::Verb verb;
while ((verb = (SkPath::Verb) *verbPtr) != SkPath::kDone_Verb) {
if (verbPtr == endOfFirstHalf) {
fOperand = true;
}
verbPtr++;
switch (verb) {
case SkPath::kMove_Verb:
if (fCurrentContour && fCurrentContour->count()) {
if (fAllowOpenContours) {
complete();
} else if (!close()) {
return false;
}
}
if (!fCurrentContour) {
fCurrentContour = fContoursHead->appendContour();
}
fCurrentContour->init(fGlobalState, fOperand,
fXorMask[fOperand] == kEvenOdd_PathOpsMask);
pointsPtr += 1;
continue;
case SkPath::kLine_Verb:
fCurrentContour->addLine(pointsPtr);
break;
case SkPath::kQuad_Verb:
{
SkVector v1 = pointsPtr[1] - pointsPtr[0];
SkVector v2 = pointsPtr[2] - pointsPtr[1];
if (v1.dot(v2) < 0) {
SkPoint pair[5];
if (SkChopQuadAtMaxCurvature(pointsPtr, pair) == 1) {
goto addOneQuad;
}
if (!SkScalarsAreFinite(&pair[0].fX, SK_ARRAY_COUNT(pair) * 2)) {
return false;
}
SkPoint cStorage[2][2];
SkPath::Verb v1 = SkReduceOrder::Quad(&pair[0], cStorage[0]);
SkPath::Verb v2 = SkReduceOrder::Quad(&pair[2], cStorage[1]);
SkPoint* curve1 = v1 != SkPath::kLine_Verb ? &pair[0] : cStorage[0];
SkPoint* curve2 = v2 != SkPath::kLine_Verb ? &pair[2] : cStorage[1];
if (can_add_curve(v1, curve1) && can_add_curve(v2, curve2)) {
fCurrentContour->addCurve(v1, curve1);
fCurrentContour->addCurve(v2, curve2);
break;
}
}
}
addOneQuad:
fCurrentContour->addQuad(pointsPtr);
break;
case SkPath::kConic_Verb: {
SkVector v1 = pointsPtr[1] - pointsPtr[0];
SkVector v2 = pointsPtr[2] - pointsPtr[1];
SkScalar weight = *weightPtr++;
if (v1.dot(v2) < 0) {
// FIXME: max curvature for conics hasn't been implemented; use placeholder
SkScalar maxCurvature = SkFindQuadMaxCurvature(pointsPtr);
if (maxCurvature > 0) {
SkConic conic(pointsPtr, weight);
SkConic pair[2];
if (!conic.chopAt(maxCurvature, pair)) {
// if result can't be computed, use original
fCurrentContour->addConic(pointsPtr, weight);
break;
}
SkPoint cStorage[2][3];
SkPath::Verb v1 = SkReduceOrder::Conic(pair[0], cStorage[0]);
SkPath::Verb v2 = SkReduceOrder::Conic(pair[1], cStorage[1]);
SkPoint* curve1 = v1 != SkPath::kLine_Verb ? pair[0].fPts : cStorage[0];
SkPoint* curve2 = v2 != SkPath::kLine_Verb ? pair[1].fPts : cStorage[1];
if (can_add_curve(v1, curve1) && can_add_curve(v2, curve2)) {
fCurrentContour->addCurve(v1, curve1, pair[0].fW);
fCurrentContour->addCurve(v2, curve2, pair[1].fW);
break;
}
}
}
fCurrentContour->addConic(pointsPtr, weight);
} break;
case SkPath::kCubic_Verb:
{
// Split complex cubics (such as self-intersecting curves or
// ones with difficult curvature) in two before proceeding.
// This can be required for intersection to succeed.
SkScalar splitT;
if (SkDCubic::ComplexBreak(pointsPtr, &splitT)) {
SkPoint pair[7];
SkChopCubicAt(pointsPtr, pair, splitT);
if (!SkScalarsAreFinite(&pair[0].fX, SK_ARRAY_COUNT(pair) * 2)) {
return false;
}
SkPoint cStorage[2][4];
SkPath::Verb v1 = SkReduceOrder::Cubic(&pair[0], cStorage[0]);
SkPath::Verb v2 = SkReduceOrder::Cubic(&pair[3], cStorage[1]);
SkPoint* curve1 = v1 == SkPath::kCubic_Verb ? &pair[0] : cStorage[0];
SkPoint* curve2 = v2 == SkPath::kCubic_Verb ? &pair[3] : cStorage[1];
if (can_add_curve(v1, curve1) && can_add_curve(v2, curve2)) {
fCurrentContour->addCurve(v1, curve1);
fCurrentContour->addCurve(v2, curve2);
break;
}
}
}
fCurrentContour->addCubic(pointsPtr);
break;
case SkPath::kClose_Verb:
SkASSERT(fCurrentContour);
if (!close()) {
return false;
}
continue;
default:
SkDEBUGFAIL("bad verb");
return false;
}
SkASSERT(fCurrentContour);
fCurrentContour->debugValidate();
pointsPtr += SkPathOpsVerbToPoints(verb);
}
if (fCurrentContour && fCurrentContour->count() &&!fAllowOpenContours && !close()) {
return false;
}
return true;
}
sk_sp<SkPathEffect> SkMatrixPathEffect::MakeTranslate(SkScalar dx, SkScalar dy) {
if (!SkScalarsAreFinite(dx, dy)) {
return nullptr;
}
return sk_sp<SkPathEffect>(new SkMatrixPE(SkMatrix::MakeTrans(dx, dy)));
}
bool SkOpEdgeBuilder::walk() {
uint8_t* verbPtr = fPathVerbs.begin();
uint8_t* endOfFirstHalf = &verbPtr[fSecondHalf];
SkPoint* pointsPtr = fPathPts.begin() - 1;
SkScalar* weightPtr = fWeights.begin();
SkPath::Verb verb;
SkOpContour* contour = fContourBuilder.contour();
while ((verb = (SkPath::Verb) *verbPtr) != SkPath::kDone_Verb) {
if (verbPtr == endOfFirstHalf) {
fOperand = true;
}
verbPtr++;
switch (verb) {
case SkPath::kMove_Verb:
if (contour && contour->count()) {
if (fAllowOpenContours) {
complete();
} else if (!close()) {
return false;
}
}
if (!contour) {
fContourBuilder.setContour(contour = fContoursHead->appendContour());
}
contour->init(fGlobalState, fOperand,
fXorMask[fOperand] == kEvenOdd_PathOpsMask);
pointsPtr += 1;
continue;
case SkPath::kLine_Verb:
fContourBuilder.addLine(pointsPtr);
break;
case SkPath::kQuad_Verb:
{
SkVector v1 = pointsPtr[1] - pointsPtr[0];
SkVector v2 = pointsPtr[2] - pointsPtr[1];
if (v1.dot(v2) < 0) {
SkPoint pair[5];
if (SkChopQuadAtMaxCurvature(pointsPtr, pair) == 1) {
goto addOneQuad;
}
if (!SkScalarsAreFinite(&pair[0].fX, SK_ARRAY_COUNT(pair) * 2)) {
return false;
}
for (unsigned index = 0; index < SK_ARRAY_COUNT(pair); ++index) {
force_small_to_zero(&pair[index]);
}
SkPoint cStorage[2][2];
SkPath::Verb v1 = SkReduceOrder::Quad(&pair[0], cStorage[0]);
SkPath::Verb v2 = SkReduceOrder::Quad(&pair[2], cStorage[1]);
SkPoint* curve1 = v1 != SkPath::kLine_Verb ? &pair[0] : cStorage[0];
SkPoint* curve2 = v2 != SkPath::kLine_Verb ? &pair[2] : cStorage[1];
if (can_add_curve(v1, curve1) && can_add_curve(v2, curve2)) {
fContourBuilder.addCurve(v1, curve1);
fContourBuilder.addCurve(v2, curve2);
break;
}
}
}
addOneQuad:
fContourBuilder.addQuad(pointsPtr);
break;
case SkPath::kConic_Verb: {
SkVector v1 = pointsPtr[1] - pointsPtr[0];
SkVector v2 = pointsPtr[2] - pointsPtr[1];
SkScalar weight = *weightPtr++;
if (v1.dot(v2) < 0) {
// FIXME: max curvature for conics hasn't been implemented; use placeholder
SkScalar maxCurvature = SkFindQuadMaxCurvature(pointsPtr);
if (maxCurvature > 0) {
SkConic conic(pointsPtr, weight);
SkConic pair[2];
if (!conic.chopAt(maxCurvature, pair)) {
// if result can't be computed, use original
fContourBuilder.addConic(pointsPtr, weight);
break;
}
SkPoint cStorage[2][3];
SkPath::Verb v1 = SkReduceOrder::Conic(pair[0], cStorage[0]);
SkPath::Verb v2 = SkReduceOrder::Conic(pair[1], cStorage[1]);
SkPoint* curve1 = v1 != SkPath::kLine_Verb ? pair[0].fPts : cStorage[0];
SkPoint* curve2 = v2 != SkPath::kLine_Verb ? pair[1].fPts : cStorage[1];
if (can_add_curve(v1, curve1) && can_add_curve(v2, curve2)) {
fContourBuilder.addCurve(v1, curve1, pair[0].fW);
fContourBuilder.addCurve(v2, curve2, pair[1].fW);
break;
}
}
}
fContourBuilder.addConic(pointsPtr, weight);
} break;
case SkPath::kCubic_Verb:
{
// Split complex cubics (such as self-intersecting curves or
// ones with difficult curvature) in two before proceeding.
// This can be required for intersection to succeed.
SkScalar splitT[3];
int breaks = SkDCubic::ComplexBreak(pointsPtr, splitT);
if (!breaks) {
fContourBuilder.addCubic(pointsPtr);
break;
}
SkASSERT(breaks <= (int) SK_ARRAY_COUNT(splitT));
struct Splitsville {
double fT[2];
SkPoint fPts[4];
SkPoint fReduced[4];
SkPath::Verb fVerb;
bool fCanAdd;
} splits[4];
SkASSERT(SK_ARRAY_COUNT(splits) == SK_ARRAY_COUNT(splitT) + 1);
SkTQSort(splitT, &splitT[breaks - 1]);
for (int index = 0; index <= breaks; ++index) {
Splitsville* split = &splits[index];
split->fT[0] = index ? splitT[index - 1] : 0;
split->fT[1] = index < breaks ? splitT[index] : 1;
SkDCubic part = SkDCubic::SubDivide(pointsPtr, split->fT[0], split->fT[1]);
if (!part.toFloatPoints(split->fPts)) {
return false;
}
split->fVerb = SkReduceOrder::Cubic(split->fPts, split->fReduced);
SkPoint* curve = SkPath::kCubic_Verb == verb
? split->fPts : split->fReduced;
split->fCanAdd = can_add_curve(split->fVerb, curve);
}
for (int index = 0; index <= breaks; ++index) {
Splitsville* split = &splits[index];
if (!split->fCanAdd) {
continue;
}
int prior = index;
while (prior > 0 && !splits[prior - 1].fCanAdd) {
--prior;
}
if (prior < index) {
split->fT[0] = splits[prior].fT[0];
split->fPts[0] = splits[prior].fPts[0];
}
int next = index;
int breakLimit = SkTMin(breaks, (int) SK_ARRAY_COUNT(splits) - 1);
while (next < breakLimit && !splits[next + 1].fCanAdd) {
++next;
}
if (next > index) {
split->fT[1] = splits[next].fT[1];
split->fPts[3] = splits[next].fPts[3];
}
if (prior < index || next > index) {
split->fVerb = SkReduceOrder::Cubic(split->fPts, split->fReduced);
}
SkPoint* curve = SkPath::kCubic_Verb == split->fVerb
? split->fPts : split->fReduced;
if (!can_add_curve(split->fVerb, curve)) {
return false;
}
fContourBuilder.addCurve(split->fVerb, curve);
}
}
break;
case SkPath::kClose_Verb:
SkASSERT(contour);
if (!close()) {
return false;
}
contour = nullptr;
continue;
default:
SkDEBUGFAIL("bad verb");
return false;
}
SkASSERT(contour);
if (contour->count()) {
contour->debugValidate();
}
pointsPtr += SkPathOpsVerbToPoints(verb);
}
fContourBuilder.flush();
if (contour && contour->count() &&!fAllowOpenContours && !close()) {
return false;
}
return true;
}
