//*****************************************************************************
//
// Get the state defined by the configuration menu items.
// This function will query the configuration menus to determine the current
// choices for channels, period, etc. These will be stored in the structure
// that was passed to the function.
//
//*****************************************************************************
void
MenuGetState(tConfigState *psState)
{
int32_t ui32Temp;
//
// Check the arguments
//
ASSERT(psState);
if(!psState)
{
return;
}
//
// Read the various configuration menus and store their state
//
if(SlideMenuFocusItemGet(&g_sSleepMenu) > 0)
{
psState->bSleep = true;
}
else
{
psState->bSleep = false;
}
ui32Temp = SlideMenuFocusItemGet(&g_sStorageMenu);;
psState->ui8Storage = (uint8_t)ui32Temp;
ui32Temp = SlideMenuSelectedGet(&g_sChannelsMenu);
psState->ui16SelectedMask = (uint16_t)ui32Temp;
ui32Temp = g_pui32LogPeriod[SlideMenuFocusItemGet(&g_sPeriodMenu)];
psState->ui32Period = ui32Temp;
}
//*****************************************************************************
//
// Get the state defined by the configuration menu items.
// This function will query the configuration menus to determine the current
// choices for channels, period, etc. These will be stored in the structure
// that was passed to the function.
//
//*****************************************************************************
void
MenuGetState(tConfigState *pState)
{
//
// Check the arguments
//
ASSERT(pState);
//
// Read the various configuration menus and store their state
//
if(pState)
{
pState->bSleep = (unsigned char)SlideMenuFocusItemGet(&g_sSleepMenu);
pState->ucStorage = (unsigned char)
SlideMenuFocusItemGet(&g_sStorageMenu);
pState->usSelectedMask = (unsigned short)
SlideMenuSelectedGet(&g_sChannelsMenu);
pState->ulPeriod = g_ulLogPeriod[SlideMenuFocusItemGet(&g_sPeriodMenu)];
}
}
//*****************************************************************************
//
// The program main function. It performs initialization, then runs a loop to
// process USB activities and operate the user interface.
//
//*****************************************************************************
int
main(void)
{
uint32_t ui32DriveTimeout;
//
// Enable lazy stacking for interrupt handlers. This allows floating-point
// instructions to be used within interrupt handlers, but at the expense of
// extra stack usage.
//
ROM_FPULazyStackingEnable();
//
// Set the system clock to run at 50MHz from the PLL.
//
ROM_SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
SYSCTL_XTAL_16MHZ);
//
// Configure the required pins for USB operation.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOG);
ROM_GPIOPinConfigure(GPIO_PG4_USB0EPEN);
ROM_GPIOPinTypeUSBDigital(GPIO_PORTG_BASE, GPIO_PIN_4);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOL);
ROM_GPIOPinTypeUSBAnalog(GPIO_PORTL_BASE, GPIO_PIN_6 | GPIO_PIN_7);
ROM_GPIOPinTypeUSBAnalog(GPIO_PORTB_BASE, GPIO_PIN_0 | GPIO_PIN_1);
//
// Configure SysTick for a 100Hz interrupt.
//
ROM_SysTickPeriodSet(ROM_SysCtlClockGet() / TICKS_PER_SECOND);
ROM_SysTickEnable();
ROM_SysTickIntEnable();
//
// Enable the uDMA controller and set up the control table base.
// The uDMA controller is used by the USB library.
//
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UDMA);
ROM_uDMAEnable();
ROM_uDMAControlBaseSet(g_psDMAControlTable);
//
// Enable Interrupts
//
ROM_IntMasterEnable();
//
// Initialize the display driver.
//
CFAL96x64x16Init();
//
// Initialize the buttons driver.
//
ButtonsInit();
//
// Initialize two offscreen displays and assign the palette. These
// buffers are used by the slide menu widget to allow animation effects.
//
GrOffScreen4BPPInit(&g_sOffscreenDisplayA, g_pui8OffscreenBufA, 96, 64);
GrOffScreen4BPPPaletteSet(&g_sOffscreenDisplayA, g_pui32Palette, 0,
NUM_PALETTE_ENTRIES);
GrOffScreen4BPPInit(&g_sOffscreenDisplayB, g_pui8OffscreenBufB, 96, 64);
GrOffScreen4BPPPaletteSet(&g_sOffscreenDisplayB, g_pui32Palette, 0,
NUM_PALETTE_ENTRIES);
//
// Show an initial status screen
//
g_pcStatusLines[0] = "Waiting";
g_pcStatusLines[1] = "for device";
ShowStatusScreen(g_pcStatusLines, 2);
//
// Add the compile-time defined widgets to the widget tree.
//
WidgetAdd(WIDGET_ROOT, (tWidget *)&g_sFileMenuWidget);
//
// Initially wait for device connection.
//
g_eState = STATE_NO_DEVICE;
//
// Initialize the USB stack for host mode.
//
USBStackModeSet(0, eUSBModeHost, 0);
//
// Register the host class drivers.
//
USBHCDRegisterDrivers(0, g_ppHostClassDrivers, g_ui32NumHostClassDrivers);
//
// Open an instance of the mass storage class driver.
//
g_psMSCInstance = USBHMSCDriveOpen(0, MSCCallback);
//
// Initialize the drive timeout.
//
ui32DriveTimeout = USBMSC_DRIVE_RETRY;
//
// Initialize the power configuration. This sets the power enable signal
// to be active high and does not enable the power fault.
//
USBHCDPowerConfigInit(0, USBHCD_VBUS_AUTO_HIGH | USBHCD_VBUS_FILTER);
//
// Initialize the USB controller for host operation.
//
USBHCDInit(0, g_pui8HCDPool, HCD_MEMORY_SIZE);
//
// Initialize the file system.
//
FileInit();
//
// Enter an infinite loop to run the user interface and process USB
// events.
//
while(1)
{
uint32_t ui32LastTickCount = 0;
//
// Call the USB stack to keep it running.
//
USBHCDMain();
//
// Process any messages in the widget message queue. This keeps the
// display UI running.
//
WidgetMessageQueueProcess();
//
// Take action based on the application state.
//
switch(g_eState)
{
//
// A device has enumerated.
//
case STATE_DEVICE_ENUM:
{
//
// Check to see if the device is ready. If not then stay
// in this state and we will check it again on the next pass.
//
if(USBHMSCDriveReady(g_psMSCInstance) != 0)
{
//
// Wait about 500ms before attempting to check if the
// device is ready again.
//
ROM_SysCtlDelay(ROM_SysCtlClockGet()/(3));
//
// Decrement the retry count.
//
ui32DriveTimeout--;
//
// If the timeout is hit then go to the
// STATE_TIMEOUT_DEVICE state.
//
if(ui32DriveTimeout == 0)
{
g_eState = STATE_TIMEOUT_DEVICE;
}
break;
}
//
// Getting here means the device is ready.
// Reset the CWD to the root directory.
//
g_pcCwdBuf[0] = '/';
g_pcCwdBuf[1] = 0;
//
// Set the initial directory level to the root
//
g_ui32Level = 0;
//
// We need to reset the indexes of the root menu to 0, so that
// it will start at the top of the file list, and reset the
// slide menu widget to start with the root menu.
//
g_psFileMenus[g_ui32Level].ui32CenterIndex = 0;
g_psFileMenus[g_ui32Level].ui32FocusIndex = 0;
SlideMenuMenuSet(&g_sFileMenuWidget, &g_psFileMenus[g_ui32Level]);
//
// Initiate a directory change to the root. This will
// populate a menu structure representing the root directory.
//
if(ProcessDirChange("/", g_ui32Level))
{
//
// If there were no errors reported, we are ready for
// MSC operation.
//
g_eState = STATE_DEVICE_READY;
//
// Set the Device Present flag.
//
g_ui32Flags = FLAGS_DEVICE_PRESENT;
//
// Request a repaint so the file menu will be shown
//
WidgetPaint(WIDGET_ROOT);
}
break;
}
//
// If there is no device then just wait for one.
//
case STATE_NO_DEVICE:
{
if(g_ui32Flags == FLAGS_DEVICE_PRESENT)
{
//
// Show waiting message on screen
//
g_pcStatusLines[0] = "Waiting";
g_pcStatusLines[1] = "for device";
ShowStatusScreen(g_pcStatusLines, 2);
//
// Clear the Device Present flag.
//
g_ui32Flags &= ~FLAGS_DEVICE_PRESENT;
}
break;
}
//
// An unknown device was connected.
//
case STATE_UNKNOWN_DEVICE:
{
//
// If this is a new device then change the status.
//
if((g_ui32Flags & FLAGS_DEVICE_PRESENT) == 0)
{
//
// Clear the screen and indicate that an unknown device
// is present.
//
g_pcStatusLines[0] = "Unknown";
g_pcStatusLines[1] = "device";
ShowStatusScreen(g_pcStatusLines, 2);
}
//
// Set the Device Present flag.
//
g_ui32Flags = FLAGS_DEVICE_PRESENT;
break;
}
//
// The connected mass storage device is not reporting ready.
//
case STATE_TIMEOUT_DEVICE:
{
//
// If this is the first time in this state then print a
// message.
//
if((g_ui32Flags & FLAGS_DEVICE_PRESENT) == 0)
{
//
//
// Clear the screen and indicate that an unknown device
// is present.
//
g_pcStatusLines[0] = "Device";
g_pcStatusLines[1] = "Timeout";
ShowStatusScreen(g_pcStatusLines, 2);
}
//
// Set the Device Present flag.
//
g_ui32Flags = FLAGS_DEVICE_PRESENT;
break;
}
//
// The device is ready and in use.
//
case STATE_DEVICE_READY:
{
//
// Process occurrence of timer tick. Check for user input
// once each tick.
//
if(g_ui32SysTickCount != ui32LastTickCount)
{
uint8_t ui8ButtonState;
uint8_t ui8ButtonChanged;
ui32LastTickCount = g_ui32SysTickCount;
//
// Get the current debounced state of the buttons.
//
ui8ButtonState = ButtonsPoll(&ui8ButtonChanged, 0);
//
// If select button or right button is pressed, then we
// are trying to descend into another directory
//
if(BUTTON_PRESSED(SELECT_BUTTON,
ui8ButtonState, ui8ButtonChanged) ||
BUTTON_PRESSED(RIGHT_BUTTON,
ui8ButtonState, ui8ButtonChanged))
{
uint32_t ui32NewLevel;
uint32_t ui32ItemIdx;
char *pcItemName;
//
// Get a pointer to the current menu for this CWD.
//
tSlideMenu *psMenu = &g_psFileMenus[g_ui32Level];
//
// Get the highlighted index in the current file list.
// This is the currently highlighted file or dir
// on the display. Then get the name of the file at
// this index.
//
ui32ItemIdx = SlideMenuFocusItemGet(psMenu);
pcItemName = psMenu->psSlideMenuItems[ui32ItemIdx].pcText;
//
// Make sure we are not yet past the maximum tree
// depth.
//
if(g_ui32Level < MAX_SUBDIR_DEPTH)
{
//
// Potential new level is one greater than the
// current level.
//
ui32NewLevel = g_ui32Level + 1;
//
// Process the directory change to the new
// directory. This function will populate a menu
// structure with the files and subdirs in the new
// directory.
//
if(ProcessDirChange(pcItemName, ui32NewLevel))
{
//
// If the change was successful, then update
// the level.
//
g_ui32Level = ui32NewLevel;
//
// Now that all the prep is done, send the
// KEY_RIGHT message to the widget and it will
// "slide" from the previous file list to the
// new file list of the CWD.
//
SendWidgetKeyMessage(WIDGET_MSG_KEY_RIGHT);
}
}
}
//
// If the UP button is pressed, just pass it to the widget
// which will handle scrolling the list of files.
//
if(BUTTON_PRESSED(UP_BUTTON, ui8ButtonState, ui8ButtonChanged))
{
SendWidgetKeyMessage(WIDGET_MSG_KEY_UP);
}
//
// If the DOWN button is pressed, just pass it to the widget
// which will handle scrolling the list of files.
//
if(BUTTON_PRESSED(DOWN_BUTTON, ui8ButtonState, ui8ButtonChanged))
{
SendWidgetKeyMessage(WIDGET_MSG_KEY_DOWN);
}
//
// If the LEFT button is pressed, then we are attempting
// to go up a level in the file system.
//
if(BUTTON_PRESSED(LEFT_BUTTON, ui8ButtonState, ui8ButtonChanged))
{
uint32_t ui32NewLevel;
//
// Make sure we are not already at the top of the
// directory tree (at root).
//
if(g_ui32Level)
{
//
// Potential new level is one less than the
// current level.
//
ui32NewLevel = g_ui32Level - 1;
//
// Process the directory change to the new
// directory. This function will populate a menu
// structure with the files and subdirs in the new
// directory.
//
if(ProcessDirChange("..", ui32NewLevel))
{
//
// If the change was successful, then update
// the level.
//
g_ui32Level = ui32NewLevel;
//
// Now that all the prep is done, send the
// KEY_LEFT message to the widget and it will
// "slide" from the previous file list to the
// new file list of the CWD.
//
SendWidgetKeyMessage(WIDGET_MSG_KEY_LEFT);
}
}
}
}
break;
}
//
// Something has caused a power fault.
//
case STATE_POWER_FAULT:
{
//
// Clear the screen and show a power fault indication.
//
g_pcStatusLines[0] = "Power";
g_pcStatusLines[1] = "fault";
ShowStatusScreen(g_pcStatusLines, 2);
break;
}
default:
{
break;
}
}
}
}
