static void IkarusAddContour(SplineChar *sc,int npts,BasePoint *bps,
uint8 *ptype, int nesting) {
SplinePointList *spl;
SplinePoint *last, *next;
int i, cw;
spl = chunkalloc(sizeof(SplinePointList));
spl->next = sc->layers[ly_fore].splines;
sc->layers[ly_fore].splines = spl;
spl->first = spl->last = last = SplinePointCreate(bps[0].x,bps[0].y);
last->pointtype = ptype[npts-1];
last->nextcpdef = last->prevcpdef = true;
for ( i=1; i<npts-1; ++i ) {
next = SplinePointCreate(bps[i].x,bps[i].y);
next->nextcpdef = next->prevcpdef = true;
next->pointtype = ptype[i];
SplineMake3(last,next);
last = next;
}
SplineMake3(last,spl->last);
last = spl->first;
for ( i=1; i<npts; ++i ) {
SplineCharDefaultPrevCP(last);
SplineCharDefaultNextCP(last);
last=last->next->to;
}
cw = SplinePointListIsClockwise(spl)==1;
if ( ((nesting&1) && cw) || (!(nesting&1) && !cw) )
SplineSetReverse(spl);
}
void SSRegenerateFromSpiros(SplineSet *spl) {
SplineSet *temp;
if ( spl->spiro_cnt<=1 )
return;
if ( !has_spiro)
return;
SplineSetBeziersClear(spl);
temp = SpiroCP2SplineSet(spl->spiros);
if ( temp!=NULL ) {
spl->first = temp->first;
spl->last = temp->last;
chunkfree(temp,sizeof(SplineSet));
} else {
/* didn't converge... or something */
int i;
SplinePoint *sp, *last;
last = spl->first = SplinePointCreate(spl->spiros[0].x, spl->spiros[0].y);
for ( i=1; i<spl->spiro_cnt; ++i ) {
sp = SplinePointCreate(spl->spiros[i].x, spl->spiros[i].y);
SplineMake3(last,sp);
last = sp;
}
if ( SPIRO_SPL_OPEN(spl))
spl->last = last;
else {
SplineMake3(last,spl->first);
spl->last = spl->first;
}
}
spl->beziers_need_optimizer = true;
}
static void
bezctx_ff_quadto(bezctx *z, double xm, double ym, double x3, double y3)
{
bezctx_ff *bc = (bezctx_ff *)z;
double x0, y0;
double x1, y1;
double x2, y2;
SplinePoint *sp;
if ( !finite(xm) || !finite(ym) || !finite(x3) || !finite(y3)) {
nancheck(bc);
xm = ym = x3 = y3 = 0;
}
sp = SplinePointCreate(x3,y3);
x0 = bc->ss->last->me.x;
y0 = bc->ss->last->me.y;
x1 = xm + (1./3) * (x0 - xm);
y1 = ym + (1./3) * (y0 - ym);
x2 = xm + (1./3) * (x3 - xm);
y2 = ym + (1./3) * (y3 - ym);
bc->ss->last->nextcp.x = x1;
bc->ss->last->nextcp.y = y1;
bc->ss->last->nonextcp = false;
sp->prevcp.x = x2;
sp->prevcp.y = y2;
sp->noprevcp = false;
SplineMake3(bc->ss->last,sp);
bc->ss->last = sp;
}
SplineSet *SpiroCP2SplineSet(spiro_cp *spiros) {
int n;
int any = 0;
spiro_cp *nspiros;
SplineSet *ss;
int lastty = 0;
if ( spiros==NULL )
return( NULL );
for ( n=0; spiros[n].ty!=SPIRO_END; ++n )
if ( SPIRO_SELECTED(&spiros[n]) )
++any;
if ( n==0 )
return( NULL );
if ( n==1 ) {
ss = chunkalloc(sizeof(SplineSet));
ss->first = ss->last = SplinePointCreate(spiros[0].x,spiros[0].y);
} else {
bezctx *bc = new_bezctx_ff();
if ( (spiros[0].ty&0x7f)=='{' ) {
lastty = spiros[n-1].ty;
spiros[n-1].ty = '}';
}
if ( !any ) {
#if _LIBSPIRO_FUN
if ( TaggedSpiroCPsToBezier0(spiros,bc)==0 ) {
return( NULL );
}
#else
TaggedSpiroCPsToBezier(spiros,bc);
#endif
} else {
nspiros = galloc((n+1)*sizeof(spiro_cp));
memcpy(nspiros,spiros,(n+1)*sizeof(spiro_cp));
for ( n=0; nspiros[n].ty!=SPIRO_END; ++n )
nspiros[n].ty &= ~0x80;
#if _LIBSPIRO_FUN
if ( TaggedSpiroCPsToBezier0(nspiros,bc)==0 ) {
free(nspiros);
return( NULL );
}
#else
TaggedSpiroCPsToBezier(nspiros,bc);
#endif
free(nspiros);
}
ss = bezctx_ff_close(bc);
if ( (spiros[0].ty&0x7f)=='{' )
spiros[n-1].ty = lastty;
}
ss->spiros = spiros;
ss->spiro_cnt = ss->spiro_max = n+1;
SPLCatagorizePoints(ss);
return( ss );
}
/* This routine creates a linear spline from the previous point specified to this one */
static void bezctx_ff_lineto(bezctx *z,double x,double y) {
bezctx_ff *bc=(bezctx_ff *) z;
SplinePoint *sp;
if (!isfinite(x) || !isfinite(y)) {
nancheck(bc);
x=y=0;
}
sp=SplinePointCreate(x, y);
if (sp != NULL && SplineMake3(bc->ss->last, sp) != NULL)
bc->ss->last=sp;
}
void SSRegenerateFromSpiros(SplineSet * spl) {
/* Regenerate an updated SplineSet from SpiroCPs after edits are done. */
if (spl->spiro_cnt <= 1 || !has_spiro)
return;
SplineSet *temp=SpiroCP2SplineSet(spl->spiros);
if (temp != NULL) {
/* Regenerated new SplineSet. Discard old copy. Keep new copy. */
SplineSetBeziersClear(spl);
spl->first=temp->first;
spl->last=temp->last;
chunkfree(temp, sizeof(SplineSet));
} else {
/* Didn't converge... or something ...therefore let's fake-it. */
int i;
SplinePoint *sp, *first, *last;
if ((last=first =
SplinePointCreate(spl->spiros[0].x, spl->spiros[0].y))==NULL)
return;
for (i=1; i < spl->spiro_cnt; ++i) {
if ((sp=SplinePointCreate(spl->spiros[i].x, spl->spiros[i].y))) {
SplineMake3(last, sp);
last=sp;
} else
break; /* ...have problem, but keep what we got so far */
}
/* dump the prior SplineSet and now show this line-art instead */
SplineSetBeziersClear(spl);
spl->first=first;
if (SPIRO_SPL_OPEN(spl))
spl->last=last;
else {
SplineMake3(last, spl->first);
spl->last=spl->first;
}
}
spl->beziers_need_optimizer=true;
}
static void
bezctx_ff_moveto(bezctx *z, double x, double y, int is_open) {
bezctx_ff *bc = (bezctx_ff *)z;
if ( !finite(x) || !finite(y)) {
nancheck(bc);
x = y = 0;
}
if (!bc->is_open) {
SplineSet *ss = chunkalloc(sizeof(SplineSet));
ss->next = bc->ss;
bc->ss = ss;
}
bc->ss->first = bc->ss->last = SplinePointCreate(x,y);
bc->is_open = is_open;
}
/* So we allocate a new SplineSet, and then add the first point to it */
static void bezctx_ff_moveto(bezctx *z,double x,double y,int is_open) {
bezctx_ff *bc=(bezctx_ff *) z;
if (!isfinite(x) || !isfinite(y)) { /* Protection against NaNs */
nancheck(bc);
x=y=0;
}
if (!bc->is_open) {
SplineSet *ss;
if ((ss=(SplineSet *) calloc(1, sizeof(SplineSet)))==NULL)
return;
ss->next=bc->ss;
bc->ss=ss;
}
bc->ss->first=bc->ss->last=SplinePointCreate(x, y);
bc->is_open=is_open;
}
static void
bezctx_ff_curveto(bezctx *z, double x1, double y1, double x2, double y2,
double x3, double y3)
{
bezctx_ff *bc = (bezctx_ff *)z;
SplinePoint *sp;
if ( !finite(x1) || !finite(y1) || !finite(x2) || !finite(y2) || !finite(x3) || !finite(y3)) {
nancheck(bc);
x1 = y1 = x2 = y2 = x3 = y3 = 0;
}
sp = SplinePointCreate(x3,y3);
bc->ss->last->nextcp.x = x1;
bc->ss->last->nextcp.y = y1;
bc->ss->last->nonextcp = false;
sp->prevcp.x = x2;
sp->prevcp.y = y2;
sp->noprevcp = false;
SplineMake3(bc->ss->last,sp);
bc->ss->last = sp;
}
SplineSet *SpiroCP2SplineSet(spiro_cp *spiros) {
/* Create a SplineSet from the given spiros_code_points.*/
int n;
int any = 0;
SplineSet *ss;
int lastty = 0;
if ( spiros==NULL )
return( NULL );
for ( n=0; spiros[n].ty!=SPIRO_END; ++n )
if ( SPIRO_SELECTED(&spiros[n]) )
++any;
if ( n==0 )
return( NULL );
if ( n==1 ) {
/* Spiro only haS 1 code point sofar (no conversion needed yet) */
if ( (ss=chunkalloc(sizeof(SplineSet)))==NULL || \
(ss->first=ss->last=SplinePointCreate(spiros[0].x,spiros[0].y))==NULL ) {
chunkfree(ss,sizeof(SplineSet));
return( NULL );
}
} else {
/* Spiro needs to be converted to bezier curves using libspiro. */
bezctx *bc;
if ( (bc=new_bezctx_ff())==NULL )
return( NULL );
if ( (spiros[0].ty&0x7f)=='{' ) {
lastty = spiros[n-1].ty;
spiros[n-1].ty = '}';
}
if ( !any ) {
#if _LIBSPIRO_FUN
if ( TaggedSpiroCPsToBezier0(spiros,bc)==0 ) {
if ( lastty ) spiros[n-1].ty = lastty;
free(bc);
return( NULL );
}
#else
TaggedSpiroCPsToBezier(spiros,bc);
#endif
} else {
int i;
spiro_cp *nspiros;
if ( (nspiros=malloc((n+1)*sizeof(spiro_cp)))==NULL ) {
if ( lastty ) spiros[n-1].ty = lastty;
free(bc);
return( NULL );
}
memcpy(nspiros,spiros,(n+1)*sizeof(spiro_cp));
for ( i=0; nspiros[i].ty!=SPIRO_END; ++i )
nspiros[i].ty &= ~0x80;
#if _LIBSPIRO_FUN
if ( TaggedSpiroCPsToBezier0(nspiros,bc)==0 ) {
if ( lastty ) spiros[n-1].ty = lastty;
free(nspiros);
free(bc);
return( NULL );
}
#else
TaggedSpiroCPsToBezier(nspiros,bc);
#endif
free(nspiros);
}
if ( lastty ) spiros[n-1].ty = lastty;
if ( (ss=bezctx_ff_close(bc))==NULL ) return( NULL );
}
ss->spiros = spiros;
ss->spiro_cnt = ss->spiro_max = n+1;
SPLCatagorizePoints(ss);
return( ss );
}
/* When the user tries to add a point (by doing a mouse down with a point tool
selected) there are several cases to be looked at:
If there is a single point selected and it is at the begining/end of an open spline set
if we clicked on another point which is the begining/end of an open splineset
draw a spline connecting the two spline sets and merge them
(or if it's the same spline set, then close it)
else
create a new point where we clicked
draw a spline between the selected point and the new one
deselect the old point
select the new one
endif
else if they clicked on a spline
split the spline into two bits at the point where they clicked
else
create a new point where they clicked
put it on a new splineset
select it
endif
and, if the old point is a tangent, we may need to adjust its control pt
With the introduction of spiro mode (Raph Levien's clothoid splines)
we've got to worry about all the above cases for spiro points too.
*/
void CVMouseDownPoint(CharView *cv, GEvent *event) {
SplineSet *sel, *ss;
SplinePoint *sp, *base = NULL;
SplineChar *sc = cv->b.sc;
enum pointtype ptype = (cv->active_tool==cvt_curve?pt_curve:
cv->active_tool==cvt_hvcurve?pt_hvcurve:
cv->active_tool==cvt_corner?pt_corner:
cv->active_tool==cvt_tangent?pt_tangent:
/*cv->active_tool==cvt_pen?*/pt_corner);
int order2 = cv->b.layerheads[cv->b.drawmode]->order2;
int order2_style = (order2 && !(event->u.mouse.state&ksm_meta)) ||
(!order2 && (event->u.mouse.state&ksm_meta));
cv->active_spl = NULL;
cv->active_sp = NULL;
if ( cv->b.sc->inspiro && hasspiro()) {
CVMouseDownSpiroPoint(cv, event);
return;
}
sel = CVAnySelPointList(cv);
if ( sel!=NULL ) {
if ( sel->first->selected ) base = sel->first;
else base = sel->last;
if ( base==cv->p.sp )
return; /* We clicked on the active point, that's a no-op */
}
CVPreserveState(&cv->b);
CVClearSel(cv);
if ( sel!=NULL ) {
sp = cv->p.sp;
cv->lastselpt = base;
ss = sel;
if ( base->next!=NULL )
SplineSetReverse(sel);
if ( base->next!=NULL )
IError("Base point not at end of splineset in CVMouseDownPoint");
if ( sp==NULL || (sp->next!=NULL && sp->prev!=NULL) || sp==base ) {
/* Add a new point */
SplineSetSpirosClear(sel);
sp = SplinePointCreate( cv->p.cx, cv->p.cy );
sp->noprevcp = sp->nonextcp = 1;
sp->nextcpdef = sp->prevcpdef = 1;
sp->pointtype = ptype;
sp->selected = true;
if ( !base->nonextcp && order2_style &&
cv->active_tool==cvt_pen ) {
sp->prevcp = base->nextcp;
sp->noprevcp = false;
sp->me.x = ( sp->prevcp.x + sp->nextcp.x )/2;
sp->me.y = ( sp->prevcp.y + sp->nextcp.y )/2;
sp->nonextcp = false;
sp->pointtype = pt_curve;
} else if ( order2 && !base->nonextcp ) {
sp->prevcp = base->nextcp;
sp->noprevcp = false;
if ( cv->active_tool==cvt_pen ) {
sp->nextcp.x = sp->me.x - (sp->prevcp.x-sp->me.x);
sp->nextcp.y = sp->me.y - (sp->prevcp.y-sp->me.y);
sp->nonextcp = false;
sp->pointtype = pt_curve;
}
}
if ( base->nonextcp )
base->nextcpdef = true;
SplineMake(base,sp,order2);
if ( cv->active_tool!=cvt_pen ) {
SplineCharDefaultNextCP(base);
SplineCharDefaultPrevCP(sp);
}
ss->last = sp;
} else if ( cv->p.spl==sel ) {
/* Close the current spline set */
SplineSetSpirosClear(sel);
cv->joinvalid = true;
cv->joinpos = *sp; cv->joinpos.selected = false;
if ( order2 ) {
if ( base->nonextcp || sp->noprevcp ) {
base->nonextcp = sp->noprevcp = true;
base->nextcp = base->me;
sp->prevcp = sp->me;
} else {
base->nextcp.x = sp->prevcp.x = (base->nextcp.x+sp->prevcp.x)/2;
base->nextcp.y = sp->prevcp.y = (base->nextcp.y+sp->prevcp.y)/2;
}
base->nextcpdef = sp->prevcpdef = true;
}
SplineMake(base,sp,order2);
if ( cv->active_tool!=cvt_pen )
SplineCharDefaultNextCP(base);
SplineCharDefaultPrevCP(sp);
ss->last = sp;
if ( sp->pointtype==pt_tangent ) {
SplineCharTangentNextCP(sp);
if ( sp->next ) SplineRefigure(sp->next );
}
} else {
/* Merge two spline sets */
SplineSetSpirosClear(sel);
CVMergeSPLS(cv,sel, base,sp);
}
sp->selected = true;
if ( base->pointtype==pt_tangent ) {
SplineCharTangentPrevCP(base);
if ( base->prev!=NULL )
SplineRefigure(base->prev);
}
} else if ( cv->p.spline!=NULL ) {
sp = SplineBisect(cv->p.spline,cv->p.t);
cv->joinvalid = true;
cv->joinpos = *sp; cv->joinpos.selected = false;
if ( cv->active_tool==cvt_pen )
ptype = pt_curve;
sp->pointtype = ptype;
if ( ptype==pt_hvcurve ) {
SPHVCurveForce(sp);
}
sp->selected = true;
ss = cv->p.spl;
} else {
ss = chunkalloc(sizeof(SplineSet));
sp = SplinePointCreate( cv->p.cx, cv->p.cy );
ss->first = ss->last = sp;
ss->next = cv->b.layerheads[cv->b.drawmode]->splines;
cv->b.layerheads[cv->b.drawmode]->splines = ss;
sp->nonextcp = sp->noprevcp = 1;
sp->nextcpdef = sp->prevcpdef = 1;
sp->pointtype = ptype;
sp->selected = true;
}
cv->active_spl = ss;
cv->active_sp = sp;
CVSetCharChanged(cv,true);
CVInfoDraw(cv,cv->gw);
SCUpdateAll(sc);
if ( cv->active_tool == cvt_pen )
cv->p.constrain = sp->me;
}
