void CsrSubwooferPluginConnect(Sink audio_sink, Task codec_task, Task app_task, subwooferPluginConnectParams * params)
{
FILE_INDEX index;
/* Update the current DSP status */
SetCurrentDspStatus(DSP_LOADING);
/* Give Kalimba the plugin task so it knows where to send messages */
(void) MessageCancelAll( (TaskData*)&csr_subwoofer_plugin, MESSAGE_FROM_KALIMBA);
MessageKalimbaTask( (TaskData*)&csr_subwoofer_plugin );
/* Load the Subwofoer DSP application - Panic if it could not be loaded */
index = PanicFalse( FileFind(FILE_ROOT, kal, sizeof(kal) - 1) );
PanicFalse( KalimbaLoad(index) );
/* update current DSP status */
SetCurrentDspStatus(DSP_LOADED_IDLE);
/* Allocate memory to store the plugin data */
plugin_data = (subwooferPluginData*)PanicUnlessMalloc(sizeof(subwooferPluginData));
/* Initialise the plugin data based on parameters supplied by the application */
plugin_data->audio_source = StreamSourceFromSink(audio_sink);
plugin_data->swat_system_volume_db = params->swat_system_volume_db;
plugin_data->swat_trim_gain_db = params->swat_trim_gain_db;
plugin_data->adc_volume_index = params->adc_volume;
plugin_data->input = params->input;
plugin_data->output = params->output;
plugin_data->sample_rate = params->sample_rate;
plugin_data->adc_sample_rate = params->adc_sample_rate;
plugin_data->codec_task = codec_task;
plugin_data->app_task = app_task;
plugin_data->dsp_set_sample_rate = 0; /* set later in response to AUDIO_PLUGIN_SET_MODE_MSG */
/* Zero the codecs output gain */
CodecSetOutputGainNow(plugin_data->codec_task, 0, left_and_right_ch);
CodecSetInputGainNow(plugin_data->codec_task, 0, left_and_right_ch);
/* If using the ADC, set the ADC source */
if (plugin_data->input == SUBWOOFER_INPUT_ADC)
{
/* Get the ADC source */
plugin_data->audio_source = StreamAudioSource(AUDIO_HARDWARE_CODEC, AUDIO_INSTANCE_0, AUDIO_CHANNEL_A);
}
/* Disconnect the source in case it's currently being disposed */
StreamDisconnect(StreamSourceFromSink(audio_sink), 0);
PRINT(("[SW_PLUGIN] : CsrSubwooferPluginConnect - complete\n"));
}
/*************************************************************************
NAME
InitPreAmp
DESCRIPTION
Enable the Pre Amp if configured to do so
channel contains the audio channel that you want to enable the pre amp on
RETURNS
*/
static void initPreAmp( audio_channel channel )
{
Source source = NULL ;
source = StreamAudioSource(AUDIO_HARDWARE_CODEC, AUDIO_INSTANCE_0, channel);
if( ((channel == AUDIO_CHANNEL_A) && (theSink.conf1->PIOIO.digital.mic_a.pre_amp)) ||
((channel == AUDIO_CHANNEL_B)&& (theSink.conf1->PIOIO.digital.mic_b.pre_amp)) )
{
/* Use the microphone pre-amp */
if(!SourceConfigure(source, STREAM_CODEC_MIC_INPUT_GAIN_ENABLE,TRUE ))
{
INIT_DEBUG(("INIT: Init Pre Amp FAIL [%x]\n" , (int)channel )) ;
}
}
/* Close the Source*/
SourceClose(source);
}
/****************************************************************************
DESCRIPTION
plays a tone using the audio plugin
*/
void CsrA2dpDecoderPluginPlayTone ( A2dpPluginTaskdata *task, audio_note * tone, Task codec_task, uint16 tone_volume , bool stereo)
{
Source lSource ;
Sink lSink ;
if (!DECODER)
Panic() ;
PRINT(("DECODER: Tone Start\n")) ;
lSink = StreamKalimbaSink(3) ;
/*request an indication that the tone has completed / been disconnected*/
MessageSinkTask ( lSink , (TaskData*) task ) ;
/*connect the tone*/
lSource = StreamAudioSource ( (const audio_note *) (tone) ) ;
/*mix the tone to the SBC*/
StreamConnectAndDispose( lSource , lSink ) ;
}
void A2dpStartKalimbaStreaming(const A2DP *a2dp, uint16 media_sink)
{
FILE_INDEX index = FILE_NONE;
#ifdef BUILD_FOR_23FW
Transform t;
#else
Transform t, l_t, r_t;
Source l_src = StreamAudioSource(AUDIO_HARDWARE_CODEC, AUDIO_INSTANCE_0, AUDIO_CHANNEL_A);
Source r_src = StreamAudioSource(AUDIO_HARDWARE_CODEC, AUDIO_INSTANCE_1, AUDIO_CHANNEL_B);
Sink l_snk = StreamAudioSink(AUDIO_HARDWARE_CODEC, AUDIO_INSTANCE_0, AUDIO_CHANNEL_A);
Sink r_snk = StreamAudioSink(AUDIO_HARDWARE_CODEC, AUDIO_INSTANCE_1, AUDIO_CHANNEL_B);
#endif
/* load SBC codec */
index = FileFind(FILE_ROOT, sbc_encoder, sizeof(sbc_encoder)-1);
if (!KalimbaLoad(index))
/* codec load failure, Panic as the test isn't going to work now */
Panic();
/* Init and configure RTP */
t = TransformRtpSbcEncode(StreamKalimbaSource(0), (Sink)media_sink);
TransformConfigure(t, VM_TRANSFORM_RTP_SBC_ENCODE_PACKET_SIZE, 668);
TransformConfigure(t, VM_TRANSFORM_RTP_SBC_ENCODE_MANAGE_TIMING, FALSE);
(void)TransformStart(t);
/* Configure SBC encoding format */
(void)PanicFalse(KalimbaSendMessage(KALIMBA_MSG_SBCENC_SET_PARAMS, 0x00bd, 0, 0, 0));
(void)PanicFalse(KalimbaSendMessage(KALIMBA_MSG_SBCENC_SET_BITPOOL, 0x0030, 0, 0, 0));
#ifdef BUILD_FOR_23FW
StreamDisconnect(StreamPcmSource(0), StreamPcmSink(0));
StreamDisconnect(StreamPcmSource(1), StreamPcmSink(1));
/* set up ADCs */
(void)PcmClearAllRouting();
(void)PanicFalse(PcmRateAndRoute(0, PCM_NO_SYNC, 44100, 44100, VM_PCM_INTERNAL_A));
(void)PanicFalse(PcmRateAndRoute(1, 0, 44100, 44100, VM_PCM_INTERNAL_B));
(void)PanicFalse(StreamConnect(StreamPcmSource(0),StreamKalimbaSink(0)));
(void)PanicFalse(StreamConnect(StreamPcmSource(1),StreamKalimbaSink(1)));
#else
SourceClose(l_src);
SourceClose(r_src);
SinkClose(l_snk);
SinkClose(r_snk);
(void) SourceConfigure(l_src, STREAM_CODEC_INPUT_RATE, 44100);
(void) SourceConfigure(r_src, STREAM_CODEC_INPUT_RATE, 44100);
(void) SourceSynchronise(l_src, r_src);
/* set up ADCs */
l_t = StreamConnect(l_src, StreamKalimbaSink(0));
r_t = StreamConnect(r_src, StreamKalimbaSink(1));
(void)TransformStart(l_t);
(void)TransformStart(r_t);
#endif
/* Start decode */
(void) PanicFalse(KalimbaSendMessage(KALIMBA_MSG_GO,0,0,0,0));
}