/*!
* This function executes a given command with the parameters from the #CommandProc parameter list.
* Depending on the flags parameter it execute or test a command.
*
* @param tile The tile to apply the command on (for the #CommandProc)
* @param p1 Additional data for the command (for the #CommandProc)
* @param p2 Additional data for the command (for the #CommandProc)
* @param flags Flags for the command and how to execute the command
* @param cmd The command-id to execute (a value of the CMD_* enums)
* @param text The text to pass
* @see CommandProc
* @return the cost
*/
CommandCost DoCommand(TileIndex tile, uint32 p1, uint32 p2, DoCommandFlag flags, uint32 cmd, const char *text)
{
CommandCost res;
/* Do not even think about executing out-of-bounds tile-commands */
if (tile != 0 && (tile >= MapSize() || (!IsValidTile(tile) && (flags & DC_ALL_TILES) == 0))) return CMD_ERROR;
/* Chop of any CMD_MSG or other flags; we don't need those here */
CommandProc *proc = _command_proc_table[cmd & CMD_ID_MASK].proc;
if (_docommand_recursive == 0) _error_message = INVALID_STRING_ID;
_docommand_recursive++;
/* only execute the test call if it's toplevel, or we're not execing. */
if (_docommand_recursive == 1 || !(flags & DC_EXEC) ) {
SetTownRatingTestMode(true);
res = proc(tile, flags & ~DC_EXEC, p1, p2, text);
SetTownRatingTestMode(false);
if (CmdFailed(res)) {
res.SetGlobalErrorMessage();
goto error;
}
if (_docommand_recursive == 1 &&
!(flags & DC_QUERY_COST) &&
!(flags & DC_BANKRUPT) &&
res.GetCost() != 0 &&
!CheckCompanyHasMoney(res)) {
goto error;
}
if (!(flags & DC_EXEC)) {
_docommand_recursive--;
return res;
}
}
/* Execute the command here. All cost-relevant functions set the expenses type
* themselves to the cost object at some point */
res = proc(tile, flags, p1, p2, text);
if (CmdFailed(res)) {
res.SetGlobalErrorMessage();
error:
_docommand_recursive--;
return CMD_ERROR;
}
/* if toplevel, subtract the money. */
if (--_docommand_recursive == 0 && !(flags & DC_BANKRUPT)) {
SubtractMoneyFromCompany(res);
}
return res;
}
/**
* Change the bank bank balance of a company by inserting or removing money without affecting the loan.
* @param tile unused
* @param flags operation to perform
* @param p1 the amount of money to receive (if positive), or spend (if negative)
* @param p2 (bit 0-7) - the company ID.
* (bit 8-15) - the expenses type which should register the cost/income @see ExpensesType.
* @param text unused
* @return zero cost or an error
*/
CommandCost CmdChangeBankBalance(TileIndex tile, DoCommandFlag flags, uint32 p1, uint32 p2, const char *text)
{
int32 delta = (int32)p1;
CompanyID company = (CompanyID) GB(p2, 0, 8);
ExpensesType expenses_type = Extract<ExpensesType, 8, 8>(p2);
if (!Company::IsValidID(company)) return CMD_ERROR;
if (expenses_type >= EXPENSES_END) return CMD_ERROR;
if (_current_company != OWNER_DEITY) return CMD_ERROR;
if (flags & DC_EXEC) {
/* Change company bank balance of company. */
Backup<CompanyByte> cur_company(_current_company, company, FILE_LINE);
SubtractMoneyFromCompany(CommandCost(expenses_type, -delta));
cur_company.Restore();
}
/* This command doesn't cost anyting for deity. */
CommandCost zero_cost(expenses_type, 0);
return zero_cost;
}
/** Transfer funds (money) from one company to another.
* To prevent abuse in multiplayer games you can only send money to other
* companies if you have paid off your loan (either explicitely, or implicitely
* given the fact that you have more money than loan).
* @param tile unused
* @param flags operation to perform
* @param p1 the amount of money to transfer; max 20.000.000
* @param p2 the company to transfer the money to
* @param text unused
* @return the cost of this operation or an error
*/
CommandCost CmdGiveMoney(TileIndex tile, DoCommandFlag flags, uint32 p1, uint32 p2, const char *text)
{
if (!_settings_game.economy.give_money) return CMD_ERROR;
const Company *c = Company::Get(_current_company);
CommandCost amount(EXPENSES_OTHER, min((Money)p1, (Money)20000000LL));
CompanyID dest_company = (CompanyID)p2;
/* You can only transfer funds that is in excess of your loan */
if (c->money - c->current_loan < amount.GetCost() || amount.GetCost() < 0) return CMD_ERROR;
if (!_networking || !Company::IsValidID(dest_company)) return CMD_ERROR;
if (flags & DC_EXEC) {
/* Add money to company */
Backup<CompanyByte> cur_company(_current_company, dest_company, FILE_LINE);
SubtractMoneyFromCompany(CommandCost(EXPENSES_OTHER, -amount.GetCost()));
cur_company.Restore();
}
/* Subtract money from local-company */
return amount;
}
/*!
* Toplevel network safe docommand function for the current company. Must not be called recursively.
* The callback is called when the command succeeded or failed. The parameters
* tile, p1 and p2 are from the #CommandProc function. The paramater cmd is the command to execute.
* The parameter my_cmd is used to indicate if the command is from a company or the server.
*
* @param tile The tile to perform a command on (see #CommandProc)
* @param p1 Additional data for the command (see #CommandProc)
* @param p2 Additional data for the command (see #CommandProc)
* @param cmd The command to execute (a CMD_* value)
* @param callback A callback function to call after the command is finished
* @param text The text to pass
* @param my_cmd indicator if the command is from a company or server (to display error messages for a user)
* @return true if the command succeeded, else false
*/
bool DoCommandP(TileIndex tile, uint32 p1, uint32 p2, uint32 cmd, CommandCallback *callback, const char *text, bool my_cmd)
{
assert(_docommand_recursive == 0);
CommandCost res, res2;
int x = TileX(tile) * TILE_SIZE;
int y = TileY(tile) * TILE_SIZE;
_error_message = INVALID_STRING_ID;
StringID error_part1 = GB(cmd, 16, 16);
_additional_cash_required = 0;
/* get pointer to command handler */
byte cmd_id = cmd & CMD_ID_MASK;
assert(cmd_id < lengthof(_command_proc_table));
CommandProc *proc = _command_proc_table[cmd_id].proc;
if (proc == NULL) return false;
/* Command flags are used internally */
uint cmd_flags = GetCommandFlags(cmd);
/* Flags get send to the DoCommand */
DoCommandFlag flags = CommandFlagsToDCFlags(cmd_flags);
/* Do not even think about executing out-of-bounds tile-commands */
if (tile != 0 && (tile >= MapSize() || (!IsValidTile(tile) && (cmd_flags & CMD_ALL_TILES) == 0))) return false;
/* Always execute server and spectator commands as spectator */
if (cmd_flags & (CMD_SPECTATOR | CMD_SERVER)) _current_company = COMPANY_SPECTATOR;
CompanyID old_company = _current_company;
/* If the company isn't valid it may only do server command or start a new company!
* The server will ditch any server commands a client sends to it, so effectively
* this guards the server from executing functions for an invalid company. */
if (_game_mode == GM_NORMAL && (cmd_flags & (CMD_SPECTATOR | CMD_SERVER)) == 0 && !Company::IsValidID(_current_company)) {
if (my_cmd) ShowErrorMessage(error_part1, _error_message, x, y);
return false;
}
bool notest = (cmd_flags & CMD_NO_TEST) != 0;
_docommand_recursive = 1;
/* cost estimation only? */
if (!IsGeneratingWorld() &&
_shift_pressed &&
IsLocalCompany() &&
!(cmd & CMD_NETWORK_COMMAND) &&
cmd_id != CMD_PAUSE) {
/* estimate the cost. */
SetTownRatingTestMode(true);
res = proc(tile, flags, p1, p2, text);
SetTownRatingTestMode(false);
if (CmdFailed(res)) {
res.SetGlobalErrorMessage();
ShowErrorMessage(error_part1, _error_message, x, y);
} else {
ShowEstimatedCostOrIncome(res.GetCost(), x, y);
}
_docommand_recursive = 0;
ClearStorageChanges(false);
return false;
}
if (!((cmd & CMD_NO_TEST_IF_IN_NETWORK) && _networking)) {
/* first test if the command can be executed. */
SetTownRatingTestMode(true);
res = proc(tile, flags, p1, p2, text);
SetTownRatingTestMode(false);
assert(cmd_id == CMD_COMPANY_CTRL || old_company == _current_company);
if (CmdFailed(res)) {
res.SetGlobalErrorMessage();
goto show_error;
}
/* no money? Only check if notest is off */
if (!notest && res.GetCost() != 0 && !CheckCompanyHasMoney(res)) goto show_error;
}
#ifdef ENABLE_NETWORK
/*
* If we are in network, and the command is not from the network
* send it to the command-queue and abort execution
*/
if (_networking && !(cmd & CMD_NETWORK_COMMAND)) {
NetworkSend_Command(tile, p1, p2, cmd & ~CMD_FLAGS_MASK, callback, text);
_docommand_recursive = 0;
ClearStorageChanges(false);
return true;
}
#endif /* ENABLE_NETWORK */
DEBUG(desync, 1, "cmd: %08x; %08x; %1x; %06x; %08x; %08x; %04x; %s\n", _date, _date_fract, (int)_current_company, tile, p1, p2, cmd & ~CMD_NETWORK_COMMAND, text);
/* update last build coordinate of company. */
if (tile != 0) {
Company *c = Company::GetIfValid(_current_company);
if (c != NULL) c->last_build_coordinate = tile;
}
/* Actually try and execute the command. If no cost-type is given
* use the construction one */
res2 = proc(tile, flags | DC_EXEC, p1, p2, text);
assert(cmd_id == CMD_COMPANY_CTRL || old_company == _current_company);
/* If notest is on, it means the result of the test can be different than
* the real command.. so ignore the test */
if (!notest && !((cmd & CMD_NO_TEST_IF_IN_NETWORK) && _networking)) {
assert(res.GetCost() == res2.GetCost() && CmdFailed(res) == CmdFailed(res2)); // sanity check
} else {
if (CmdFailed(res2)) {
res2.SetGlobalErrorMessage();
goto show_error;
}
}
SubtractMoneyFromCompany(res2);
/* update signals if needed */
UpdateSignalsInBuffer();
if (IsLocalCompany() && _game_mode != GM_EDITOR) {
if (res2.GetCost() != 0 && tile != 0) ShowCostOrIncomeAnimation(x, y, GetSlopeZ(x, y), res2.GetCost());
if (_additional_cash_required != 0) {
SetDParam(0, _additional_cash_required);
if (my_cmd) ShowErrorMessage(error_part1, STR_ERROR_NOT_ENOUGH_CASH_REQUIRES_CURRENCY, x, y);
if (res2.GetCost() == 0) goto callb_err;
}
}
_docommand_recursive = 0;
if (callback) callback(true, tile, p1, p2);
ClearStorageChanges(true);
return true;
show_error:
/* show error message if the command fails? */
if (IsLocalCompany() && error_part1 != 0 && my_cmd) {
ShowErrorMessage(error_part1, _error_message, x, y);
}
callb_err:
_docommand_recursive = 0;
if (callback) callback(false, tile, p1, p2);
ClearStorageChanges(false);
return false;
}
/*!
* Helper function for the toplevel network safe docommand function for the current company.
*
* @param tile The tile to perform a command on (see #CommandProc)
* @param p1 Additional data for the command (see #CommandProc)
* @param p2 Additional data for the command (see #CommandProc)
* @param cmd The command to execute (a CMD_* value)
* @param callback A callback function to call after the command is finished
* @param text The text to pass
* @param my_cmd indicator if the command is from a company or server (to display error messages for a user)
* @param estimate_only whether to give only the estimate or also execute the command
* @return the command cost of this function.
*/
CommandCost DoCommandPInternal(TileIndex tile, uint32 p1, uint32 p2, uint32 cmd, CommandCallback *callback, const char *text, bool my_cmd, bool estimate_only)
{
/* Prevent recursion; it gives a mess over the network */
assert(_docommand_recursive == 0);
_docommand_recursive = 1;
/* Reset the state. */
_additional_cash_required = 0;
/* Get pointer to command handler */
byte cmd_id = cmd & CMD_ID_MASK;
assert(cmd_id < lengthof(_command_proc_table));
CommandProc *proc = _command_proc_table[cmd_id].proc;
/* Shouldn't happen, but you never know when someone adds
* NULLs to the _command_proc_table. */
assert(proc != NULL);
/* Command flags are used internally */
CommandFlags cmd_flags = GetCommandFlags(cmd);
/* Flags get send to the DoCommand */
DoCommandFlag flags = CommandFlagsToDCFlags(cmd_flags);
#ifdef ENABLE_NETWORK
/* Make sure p2 is properly set to a ClientID. */
assert(!(cmd_flags & CMD_CLIENT_ID) || p2 != 0);
#endif
/* Do not even think about executing out-of-bounds tile-commands */
if (tile != 0 && (tile >= MapSize() || (!IsValidTile(tile) && (cmd_flags & CMD_ALL_TILES) == 0))) return_dcpi(CMD_ERROR, false);
/* Always execute server and spectator commands as spectator */
bool exec_as_spectator = (cmd_flags & (CMD_SPECTATOR | CMD_SERVER)) != 0;
/* If the company isn't valid it may only do server command or start a new company!
* The server will ditch any server commands a client sends to it, so effectively
* this guards the server from executing functions for an invalid company. */
if (_game_mode == GM_NORMAL && !exec_as_spectator && !Company::IsValidID(_current_company) && !(_current_company == OWNER_DEITY && (cmd_flags & CMD_DEITY) != 0)) {
return_dcpi(CMD_ERROR, false);
}
Backup<CompanyByte> cur_company(_current_company, FILE_LINE);
if (exec_as_spectator) cur_company.Change(COMPANY_SPECTATOR);
bool test_and_exec_can_differ = (cmd_flags & CMD_NO_TEST) != 0;
/* Test the command. */
_cleared_object_areas.Clear();
SetTownRatingTestMode(true);
ClearStorageChanges(false);
CommandCost res = proc(tile, flags, p1, p2, text);
SetTownRatingTestMode(false);
/* Make sure we're not messing things up here. */
assert(exec_as_spectator ? _current_company == COMPANY_SPECTATOR : cur_company.Verify());
/* If the command fails, we're doing an estimate
* or the player does not have enough money
* (unless it's a command where the test and
* execution phase might return different costs)
* we bail out here. */
if (res.Failed() || estimate_only ||
(!test_and_exec_can_differ && !CheckCompanyHasMoney(res))) {
if (!_networking || _generating_world || (cmd & CMD_NETWORK_COMMAND) != 0) {
/* Log the failed command as well. Just to be able to be find
* causes of desyncs due to bad command test implementations. */
DEBUG(desync, 1, "cmdf: %08x; %02x; %02x; %06x; %08x; %08x; %08x; \"%s\" (%s)", _date, _date_fract, (int)_current_company, tile, p1, p2, cmd & ~CMD_NETWORK_COMMAND, text, GetCommandName(cmd));
}
cur_company.Restore();
return_dcpi(res, false);
}
#ifdef ENABLE_NETWORK
/*
* If we are in network, and the command is not from the network
* send it to the command-queue and abort execution
*/
if (_networking && !_generating_world && !(cmd & CMD_NETWORK_COMMAND)) {
NetworkSendCommand(tile, p1, p2, cmd & ~CMD_FLAGS_MASK, callback, text, _current_company);
cur_company.Restore();
/* Don't return anything special here; no error, no costs.
* This way it's not handled by DoCommand and only the
* actual execution of the command causes messages. Also
* reset the storages as we've not executed the command. */
return_dcpi(CommandCost(), false);
}
#endif /* ENABLE_NETWORK */
DEBUG(desync, 1, "cmd: %08x; %02x; %02x; %06x; %08x; %08x; %08x; \"%s\" (%s)", _date, _date_fract, (int)_current_company, tile, p1, p2, cmd & ~CMD_NETWORK_COMMAND, text, GetCommandName(cmd));
/* Actually try and execute the command. If no cost-type is given
* use the construction one */
_cleared_object_areas.Clear();
ClearStorageChanges(false);
CommandCost res2 = proc(tile, flags | DC_EXEC, p1, p2, text);
if (cmd_id == CMD_COMPANY_CTRL) {
cur_company.Trash();
/* We are a new company -> Switch to new local company.
* We were closed down -> Switch to spectator
* Some other company opened/closed down -> The outside function will switch back */
_current_company = _local_company;
} else {
/* Make sure nothing bad happened, like changing the current company. */
assert(exec_as_spectator ? _current_company == COMPANY_SPECTATOR : cur_company.Verify());
cur_company.Restore();
}
/* If the test and execution can differ we have to check the
* return of the command. Otherwise we can check whether the
* test and execution have yielded the same result,
* i.e. cost and error state are the same. */
if (!test_and_exec_can_differ) {
assert(res.GetCost() == res2.GetCost() && res.Failed() == res2.Failed()); // sanity check
} else if (res2.Failed()) {
return_dcpi(res2, false);
}
/* If we're needing more money and we haven't done
* anything yet, ask for the money! */
if (_additional_cash_required != 0 && res2.GetCost() == 0) {
/* It could happen we removed rail, thus gained money, and deleted something else.
* So make sure the signal buffer is empty even in this case */
UpdateSignalsInBuffer();
SetDParam(0, _additional_cash_required);
return_dcpi(CommandCost(STR_ERROR_NOT_ENOUGH_CASH_REQUIRES_CURRENCY), false);
}
/* update last build coordinate of company. */
if (tile != 0) {
Company *c = Company::GetIfValid(_current_company);
if (c != NULL) c->last_build_coordinate = tile;
}
SubtractMoneyFromCompany(res2);
/* update signals if needed */
UpdateSignalsInBuffer();
return_dcpi(res2, true);
}