/*===========================================================================
FUNCTION ts_key_timer
DESCRIPTION:
键盘定时器，去除滑动造成判断错误
DEPENDENCIES
None
RETURN VALUE
None
SIDE EFFECTS
None
===========================================================================*/
static void ts_key_timer(unsigned long arg)
{
struct ts *ts = (struct ts *)arg;
TSSC("%s: key timer out!\n", __FUNCTION__);
touch_extra_key_proc(ts);
}
static void ts_late_resume(struct early_suspend *h)
{
struct ts *ts;
ts = container_of(h, struct ts, early_suspend);
enable_irq(ts->irq);
/* Data has been read, OK to clear the data flag */
writel(TSSC_CTL_STATE, TSSC_REG(CTL));
TSSC("%s:msm_touch late resume\n!", __FUNCTION__);
}
/*===========================================================================
FUNCTION touch_pass_extra_keycode
DESCRIPTION:
附加区域键值上报处理
DEPENDENCIES
None
RETURN VALUE
None
SIDE EFFECTS
None
===========================================================================*/
static void touch_pass_extra_keycode(struct ts *ts)
{
u32 key_code = record_extra_keycode.record_extra_key;
if(KEY_RESERVED != key_code)
{
input_report_key(ts->key_input, key_code, !record_extra_keycode.bRelease);
input_sync(ts->key_input);
}
TSSC("***EXTRA KEY TEST:key_code=%d, release=%d***\n", key_code, record_extra_keycode.bRelease);
return;
}
static void ts_update_pen_state(struct ts *ts, int x, int y, int pressure)
{
TSSC("{%d, %d}, pressure = %3d\n", x, y, pressure);
if (pressure) {
input_report_abs(ts->input, ABS_X, x);
input_report_abs(ts->input, ABS_Y, y);
input_report_abs(ts->input, ABS_PRESSURE, pressure);
input_report_key(ts->input, BTN_TOUCH, !!pressure);
} else {
input_report_abs(ts->input, ABS_PRESSURE, 0);
input_report_key(ts->input, BTN_TOUCH, 0);
}
input_sync(ts->input);
}
static void ts_early_suspend(struct early_suspend *h)
{
struct ts *ts;
ts = container_of(h, struct ts, early_suspend);
del_timer_sync(&ts->timer);
#ifdef CONFIG_HUAWEI_TOUCHSCREEN_EXTRA_KEY
if(ts->use_touch_key)
{
del_timer_sync(&ts->key_timer);
}
#endif
writel(0, TSSC_REG(CTL));
disable_irq(ts->irq);
TSSC("%s:msm_touch early suspend!\n", __FUNCTION__);
}
static void ts_update_pen_state(struct ts *ts, int x, int y, int pressure)
{
TSSC("{%d, %d}, pressure = %3d\n", x, y, pressure);
if (pressure) {
// Calibrate
// x = (x*msm_tscal_xscale + msm_tscal_xoffset + msm_tscal_scaler/2)/msm_tscal_scaler;
// y = (y*msm_tscal_yscale + msm_tscal_yoffset + msm_tscal_scaler/2)/msm_tscal_scaler;
x = (x*msm_tscal_xscale + msm_tscal_xoffset + 32768)/65536;
y = (y*msm_tscal_yscale + msm_tscal_yoffset + 32768)/65536;
input_report_abs(ts->input, ABS_X, x);
input_report_abs(ts->input, ABS_Y, y);
input_report_abs(ts->input, ABS_PRESSURE, pressure);
input_report_key(ts->input, BTN_TOUCH, !!pressure);
} else {
input_report_abs(ts->input, ABS_PRESSURE, 0);
input_report_key(ts->input, BTN_TOUCH, 0);
}
input_sync(ts->input);
}
static void ts_update_pen_state(struct ts *ts, int x, int y, int pressure)
{
TSSC("{%d, %d}, pressure = %3d\n", x, y, pressure);
if (pressure) {
// Calibrate
printk(KERN_ERR "X= {%d}", x);
printk(KERN_ERR "Y= {%d}", y);
printk(KERN_INFO "Input Values: {%d, %d},",
x, y);
x = (x*msm_tscal_xscale + msm_tscal_xoffset + msm_tscal_scaler/2)/msm_tscal_scaler;
y = (y*msm_tscal_yscale + msm_tscal_yoffset + msm_tscal_scaler/2)/msm_tscal_scaler;
printk(KERN_ERR "=X= {%d}", x);
printk(KERN_ERR "=Y= {%d}", y);
printk(KERN_INFO "Return Values: {%d, %d},",
x, y);
// x = (x*msm_tscal_xscale + msm_tscal_xoffset + 32768)/65536;
// y = (y*msm_tscal_yscale + msm_tscal_yoffset + 32768)/65536;
input_report_abs(ts->input, ABS_X, x);
input_report_abs(ts->input, ABS_Y, y);
printk(KERN_ERR "=ABS_X= {%d}", ABS_X);
printk(KERN_ERR "=ABS_Y= {%d}", ABS_Y);
input_report_abs(ts->input, ABS_PRESSURE, pressure);
input_report_key(ts->input, BTN_TOUCH, !!pressure);
} else {
input_report_abs(ts->input, ABS_PRESSURE, 0);
input_report_key(ts->input, BTN_TOUCH, 0);
}
input_sync(ts->input);
}
static irqreturn_t ts_interrupt(int irq, void *dev_id)
{
u32 avgs, x, y, lx, ly;
u32 num_op, num_samp;
u32 status;
struct ts *ts = dev_id;
status = readl(TSSC_REG(STATUS));
avgs = readl(TSSC_REG(AVG12));
x = avgs & 0xFFFF;
y = avgs >> 16;
ts->pen_up_count = 0;
TSSC("ts_interrupt: status=0x%x, avgs=0x%x\n", status, avgs);
/* For pen down make sure that the data just read is still valid.
* The DATA bit will still be set if the ARM9 hasn't clobbered
* the TSSC. If it's not set, then it doesn't need to be cleared
* here, so just return.
*/
if (!(readl(TSSC_REG(CTL)) & TSSC_CTL_DATA))
goto out;
/* Data has been read, OK to clear the data flag */
//writel(TSSC_CTL_STATE, TSSC_REG(CTL));
/* Valid samples are indicated by the sample number in the status
* register being the number of expected samples and the number of
* samples collected being zero (this check is due to ADC contention).
*/
num_op = (status & TSSC_STS_OPN_BMSK) >> TSSC_STS_OPN_SHIFT;
num_samp = (status & TSSC_STS_NUMSAMP_BMSK) >> TSSC_STS_NUMSAMP_SHFT;
if ((num_op == TSSC_NUMBER_OF_OPERATIONS) && (num_samp == 0)) {
/* TSSC can do Z axis measurment, but driver doesn't support
* this yet.
*/
/*
* REMOVE THIS:
* These x, y co-ordinates adjustments will be removed once
* Android framework adds calibration framework.
*/
#ifdef CONFIG_ANDROID_TOUCHSCREEN_MSM_HACKS
lx = ts->x_max - x;
ly = ts->y_max - y;
#else
lx = x;
ly = y;
#endif
TSSC("%s: x=%d, y=%d\n", __FUNCTION__, lx, ly);
/*get rid of some wrong point*/
if((lx == 0) || (lx == X_MAX) || (ly == 0) || (ly == Y_MAX))
{
TSSC("ts_outscale: x=%d, y=%d\n", lx, ly);
}
else
{
if(ts->is_first_point)
{
ts->last_x = ts->save_x = lx;
ts->last_y = ts->save_y = ly;
ts->move_fast = false;
ts->is_first_point = false;
if(ts->use_touch_key)
{
#ifdef CONFIG_HUAWEI_TOUCHSCREEN_EXTRA_KEY
update_pen_and_key_state(ts, lx, ly, 255);
#else
ts_update_pen_state(ts, lx, ly, 255);
#endif
}
else
{
ts_update_pen_state(ts, lx, ly, 255);
}
}
else
{
if(((max(ts->last_x, lx)-min(ts->last_x, lx)) > TOUCH_OFFSET)
|| ((max(ts->last_y, ly)-min(ts->last_y, ly)) > TOUCH_OFFSET) )
{
ts->last_x = lx;
ts->last_y = ly;
if(sqr((int)ts->last_y - (int)ts->save_y) > 60)
{
ts->move_fast = true;
}
else
{
ts->move_fast = false;
}
ts->save_y = ly;
ts->save_x = lx;
if(ts->use_touch_key)
{
#ifdef CONFIG_HUAWEI_TOUCHSCREEN_EXTRA_KEY
update_pen_and_key_state(ts, lx, ly, 255);
#else
ts_update_pen_state(ts, lx, ly, 255);
#endif
}
else
{
ts_update_pen_state(ts, lx, ly, 255);
}
}
}
}
//ts_update_pen_state(ts, lx, ly, 255);
/* kick pen up timer - to make sure it expires again(!) */
mod_timer(&ts->timer,
jiffies + msecs_to_jiffies(TS_PENUP_TIMEOUT_MS));
} else
printk(KERN_INFO "Ignored interrupt: {%3d, %3d},"
" op = %3d samp = %3d\n",
x, y, num_op, num_samp);
out:
return IRQ_HANDLED;
}
/*===========================================================================
FUNCTION update_pen_and_key_state
DESCRIPTION:
上报touch的坐标值或按键键值
DEPENDENCIES
None
RETURN VALUE
None
SIDE EFFECTS
None
===========================================================================*/
static void update_pen_and_key_state(struct ts *ts, int x, int y, int pressure)
{
u32 key_tmp = KEY_RESERVED;
if(pressure) /*press*/
{
if(is_in_extra_region(ts->last_x, ts->last_y))
{
/* 如果记录键值还没有释放，则返回 */
if ((FALSE == record_extra_keycode.bRelease && KEY_RESERVED != record_extra_keycode.record_extra_key)
|| true == record_extra_keycode.touch_region_first )
{
if((ts->move_fast)&&(record_extra_keycode.touch_region_first == false))
{
/* start timer */
TSSC("move fast, reset mod_key_timer. \n");
mod_timer(&ts->key_timer,
jiffies + msecs_to_jiffies(TS_KEY_DEBOUNCE_TIMER_MS));
}
return;
}
key_tmp = touch_get_extra_keycode(x, y) ;
if (KEY_RESERVED != key_tmp)
{
record_extra_keycode.record_extra_key = key_tmp;
record_extra_keycode.bRelease = FALSE;
record_extra_keycode.bSentPress = FALSE;
/* start timer */
mod_timer(&ts->key_timer,
jiffies + msecs_to_jiffies(TS_KEY_DEBOUNCE_TIMER_MS));
}
}
else
{
record_extra_keycode.touch_region_first = true;
if (KEY_RESERVED != record_extra_keycode.record_extra_key
&& FALSE == record_extra_keycode.bRelease
&& TRUE == record_extra_keycode.bSentPress)
{
/*当上报了键值后再进入touch区时，要上报release键*/
record_extra_keycode.bRelease = TRUE;
touch_pass_extra_keycode(ts);
record_extra_keycode.bRelease = FALSE;
record_extra_keycode.record_extra_key = KEY_RESERVED;
record_extra_keycode.bSentPress= FALSE;
}
ts_update_pen_state(ts, x, y, pressure);
}
}
else /*release*/
{
if(is_in_extra_region(ts->last_x, ts->last_y))
{
del_timer(&ts->key_timer);
if (KEY_RESERVED != record_extra_keycode.record_extra_key
&& FALSE == record_extra_keycode.bRelease
&& TRUE == record_extra_keycode.bSentPress)
{
record_extra_keycode.bRelease = TRUE;
touch_pass_extra_keycode(ts);
}
else
{
/* up 按键不可丢弃*/
ts_update_pen_state(ts, x, y, pressure);
}
record_extra_keycode.bRelease = FALSE;
record_extra_keycode.record_extra_key = KEY_RESERVED;
record_extra_keycode.bSentPress= FALSE;
}
else
{
ts_update_pen_state(ts, x, y, pressure);
}
record_extra_keycode.touch_region_first = false;
}
}
