Exemplos de TxPowerStateD0 em C++ (Cpp)

Exemplo n.º 1

Arquivo: MHD_SiI9234.c Projeto: brucook/kernel-android-galaxy-s2-ics

static void OnMHDCableConnected(void)
{

    TPI_DEBUG_PRINT(("[SIMG] MHD Connected\n"));

    if (txPowerState == TX_POWER_STATE_D3) {
        /* start tpi */
        WriteByteTPI(TPI_ENABLE, 0x00);	/* Write "0" to 72:C7 to
						   start HW TPI mode */
        /* enable interrupts */
        WriteIndexedRegister(INDEXED_PAGE_0, 0x78, 0x01);

        TxPowerStateD0();
    }

    mobileHdCableConnected = TRUE;

    WriteIndexedRegister(INDEXED_PAGE_0, 0xA0, 0x10);

    TPI_DEBUG_PRINT(("[SIMG] Setting DDC Burst Mode\n"));
    /* Increase DDC translation layer timer (burst mode) */
    WriteByteCBUS(0x07, DDC_XLTN_TIMEOUT_MAX_VAL | 0x0E);
    WriteByteCBUS(0x47, 0x03);
    WriteByteCBUS(0x21, 0x01); /* Heartbeat Disable */
}

Exemplo n.º 2

Arquivo: mhl_tpi.c Projeto: Flemmard/htc7x30-3.0

void HotPlugService (void) {
	DisableInterrupts(0xFF);
	Active9232();
	if ((HDCP_TxSupports == true)) {
		if (HDCP_AksvValid == true) {
			// AV MUTE
			TPI_DEBUG_PRINT (("TMDS -> Enabled (Video Muted)\n"));

			ReadModifyWriteTPI(0x1A, BIT_6 | BIT_4	| BIT_3,
				0x40 | 0x00 | 0x08);

			tmdsPoweredUp = true;

			EnableInterrupts(BIT_0 | 0x02 | 0x10 | 0x20 | 0x40 | 0x80);
		}

	} else {
		TPI_DEBUG_PRINT (("TMDS -> Enabled\n"));
		ReadModifyWriteTPI(0x1A, 
			BIT_6 | BIT_4 | BIT_3,
				0x40 | 0x00 | 0x08);
		tmdsPoweredUp = TRUE;
		EnableInterrupts(0x01 | 0x02 | 0x10 | 0x40);
	}
	TxPowerStateD0();

	I2C_WriteByte(TPI_SLAVE_ADDR, 0xcd, 0x0);
	I2C_WriteByte(TPI_SLAVE_ADDR, 0x19, 0x0);
}

Exemplo n.º 3

Arquivo: MHD_SiI9234.c Projeto: humcycles/galaxy-tab-modified

void HotPlugService (void)
{

    DisableInterrupts();
    EnableTMDS();
    TxPowerStateD0();
    EnableInterrupts();
    CheckTxFifoStable();
}

Exemplo n.º 4

Arquivo: MHD_SiI9234.c Projeto: brucook/kernel-android-galaxy-s2-ics

static void HotPlugService(void)
{
    /* disable interrupts */
    ReadModifyWriteTPI(TPI_INTERRUPT_ENABLE_REG,
                       RECEIVER_SENSE_EVENT_MASK, 0x00);

    /* enable TMDS */
    pr_info("[SIMG] TMDS -> Enabled\n");
    ReadModifyWriteTPI(TPI_SYSTEM_CONTROL_DATA_REG,
                       TMDS_OUTPUT_CONTROL_MASK, TMDS_OUTPUT_CONTROL_ACTIVE);
    tmdsPoweredUp = TRUE;

    TxPowerStateD0();

    /* enable interrupts */
    WriteIndexedRegister(INDEXED_PAGE_0, 0x78, 0x01);

    CheckTxFifoStable();
}

Exemplo n.º 5

Arquivo: MHD_SiI9234.c Projeto: humcycles/galaxy-tab-modified

void OnMHDCableConnected (void)
{

    TPI_DEBUG_PRINT (("[SIMG] MHD Connected\n"));

    if (txPowerState == TX_POWER_STATE_D3)
    {
        sii9234_start_tpi();
        EnableInterrupts();
        TxPowerStateD0();
    }

    mobileHdCableConnected = TRUE;

    WriteIndexedRegister(INDEXED_PAGE_0, 0xA0, 0x10);

    TPI_DEBUG_PRINT (("[SIMG] Setting DDC Burst Mode\n"));
    WriteByteCBUS(0x07, DDC_XLTN_TIMEOUT_MAX_VAL | 0x0E); 	// Increase DDC translation layer timer (burst mode)
    WriteByteCBUS(0x47, 0x03);

    WriteByteCBUS(0x21, 0x01); // Heartbeat Disable

}